mirror of
https://github.com/microsoft/PowerToys.git
synced 2024-12-11 17:59:28 +08:00
9.4 KiB
9.4 KiB
Install tests
- install a previous version on a clean machine (a clean machine doesn't have the
%localappdata%\Microsoft\PowerToys
folder) - open the Settings and for each module change at least one option
- open the FancyZones editor and create two custom layouts:
- a canvas layout with 2 zones, use unicode chars in the layout's name
- one from grid template using 4 zones and splitting one zone
- apply the custom canvas layout to the primary desktop
- create a virtual desktop and apply the custom grid layout
- if you have a second monitor apply different templates layouts for the primary desktop and for the second virtual desktop
- install the new version (it will uninstall the old version and install the new version)
- verify the settings are preserved and FancyZones configuration is still the same
General Settings
Admin mode:
- restart PT and verify it runs as user
- restart as admin and set "Always run as admin"
- restart PT and verify it runs as admin
- if it's not on, turn on "Run at startup"
- reboot the machine and verify PT runs as admin (it should not prompt the UAC dialog)
- turn Always run as admin" off
- reboot the machine and verify it now runs as user
Modules on/off:
- turn off all the modules and verify all module are off
- restart PT and verify that all module are still off in the settings page and they are actually inactive
- turn on all the module, all module are now working
- restart PT and verify that all module are still on in the settings page and they are actually working
Color Picker
- Enable the Color Picker in settings and ensure that the hotkey brings up Color Picker
- when PowerToys is running unelevated on start-up
- when PowerToys is running as admin on start-up
- when PowerToys is restarted as admin, by clicking the restart as admin button in the settings
- Change
Activate Color Picker shortcut
and check the new shortcut is working - Try all three
Activation behavior
s(Color Picker with editor mode enabled
,Editor
,Color Picker only
) - Change
Color format for clipboard
and check if the correct format is copied from the Color picker - Try to copy color formats to the clipboard from the Editor
- Check
Show color name
and verify if color name is shown in the Color picker - Enable one new format, disable one existing format, reorder enabled formats and check if settings are populated to the Editor
- Select a color from the history in the Editor
- Remove color from the history in the Editor
- Open the Color Picker from the Editor
- Open Adjust color from the Editor
- Check Color Picker logs for errors
FancyZones Editor
- Open editor from the settings
- Open editor with a shortcut
- Create a new layout (grid and canvas)
- Duplicate a template and a custom layout
- Delete layout
- Edit templates (number of zones, spacing, distance to highlight adjacent zones). Verify after reopening the editor that saved settings are kept the same.
- Edit canvas layout: zones size and position, create or delete zones.
- Edit grid layout: split, merge, resize zones.
- Check
Save and apply
andCancel
buttons behavior after editing. - Assign a layout to each monitor.
- Assign keys to quickly switch layouts (custom layouts only),
Win + Ctrl + Alt + number
. - Test duplicate layout focus
- Select any layout X in 'Templates' or 'Custom' section by click left mouse button
- Mouse right button click on any layout Y in 'Templates' or 'Custom' sections
- Duplicate it by clicking 'Create custom layout' (Templates section) or 'Duplicate' in 'Custom' section
- Expect the layout Y is duplicated
FancyZones
- Switch between
Allow zones to span across monitors
on and off. Verify that layouts are applied correctly in both cases. - Change zone colors and opacity.
- Exclude some apps, verify that they're not applicable to a zone.
- Launch PT in user mode, try to assign a window with administrator privileges to a zone. Verify the notification is shown.
- Launch PT in administrator mode, assign a window with administrator privileges.
- Create virtual desktop, verify that there are the same layouts as applied to the previous virtual desktop.
- After creating a virtual desktop apply another layout or edit the applied one. Verify that the other virtual desktop layout wasn't changed.
- Delete an applied custom layout in the Editor, verify that there is no layout applied instead of it.
- Open
Task view
, right-click on the window, check theShow this window on all desktops
or theShow windows from this app on all desktops
option to turn it on.- Turn Show this window on all desktops on, verify you can snap this window to a zone.
- Turn Show windows from this app on all desktops on, verify you can snap this window to a zone.
- Switch between layouts with quick keys.
- Switch with
Win
+Ctrl
+Alt
+key
- Switch with just a key while dragging a window.
- Switch with
- Change screen resolution or scaling.
- Assign grid layout, verify that the assigned layout fits the screen. NOTE: canvas layout could not fit the screen if it was created on a monitor with a different resolution.
- Disable FZ
- Re-enable FZ, verify that everything is in the same state as it was before disabling.
- Test layout resetting.
Before testing
- Remove all virtual desktops
- Remove
CurrentVirtualDesktop
from\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\SessionInfo\1\VirtualDesktops
- Remove
VirtualDesktopIDs
from\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\VirtualDesktops
-
Test screen locking
- Set custom layouts on each monitor
- Lock screen / unplug monitor / plug monitor
- Verify that layouts weren't reset to defaults
-
Test restart
- Set custom layouts on each monitor
- Restart the computer
- Verify that layouts weren't reset to defaults
File Explorer Add-ons
- Running as user:
- go to PowerToys repo root
- verify the README.md Preview Pane shows the correct content
- go to PowerToys repo and visit src\modules\ShortcutGuide\ShortcutGuide\svgs
- verify Preview Pane works for the SVG files
- verify the Icon Preview works for the SVG file (loop through different icon preview sizes)
- go to PowerToys repo and visit src\modules\previewpane\UnitTests-PdfPreviewHandler\HelperFiles
- verify Preview Pane works for the PDF file
- verify the Icon Preview works for the PDF file (loop through different icon preview sizes)
- go to PowerToys repo and visit src\modules\previewpane\UnitTests-GcodePreviewHandler\HelperFiles
- verify Preview Pane works for the gcode file
- verify the Icon Preview works for the gcode file (loop through different icon preview sizes)
- go to PowerToys repo and visit src\modules\previewpane\UnitTests-StlThumbnailProvider\HelperFiles
- verify the Icon Preview works for the stl file (loop through different icon preview sizes)
- go to PowerToys repo and visit src\runner
- verify Preview Pane works for source files (shows syntax highlighting)
- Running as admin (or user since recently):
- open the Settings and turn off the Preview Pane and Icon Previous toggles
- go to PowerToys repo root
- verify the README.md Preview Pane doesn't show any content
- go to PowerToys repo and visit src\modules\ShortcutGuide\ShortcutGuide\svgs
- verify Preview Pane doesn't show the preview for the SVG files
- the Icon Preview for the existing SVG will still show since the icons are cached (you can also use
cleanmgr.exe
to clean all thumbnails cached in your system). You may need to restart the machine for this setting to apply as well.
- copy and paste one of the SVG file and verify the new file show the generic SVG icon
- go to PowerToys repo and visit src\modules\previewpane\UnitTests-PdfPreviewHandler\HelperFiles
- verify Preview Pane doesn't show the preview for the PDF file
- go to PowerToys repo and visit src\modules\previewpane\UnitTests-GcodePreviewHandler\HelperFiles
- verify Preview Pane doesn't show the preview for the gcode file
- go to PowerToys repo and visit src\modules\previewpane\UnitTests-StlThumbnailProvider\HelperFiles
- verify Preview Pane doesn't show the preview for the stl file (a generated thumbnail would show when there's no preview)
- go to PowerToys repo and visit src\runner
- verify Preview Pane doesn't show the preview for source code files or that it's a default previewer instead of Monaco
Awake
- Try out the features and see if they work, no list at this time.
Text Extractor
- Enable Text Extractor. Then:
- Press the activation shortcut and verify the overlay appears.
- Press Escape and verify the overlay disappears.
- Press the activation shortcut and verify the overlay appears.
- Right-click and select Cancel. Verify the overlay disappears.
- Disable Text Extractor and verify that the activation shortuct no longer activates the utility.
- With Text Extractor enabled and activated:
- Try to select text and verify it is copied to the clipboard.
- In a multi-monitor setup with different dpis on each monitor:
- Verify text is correctly captured on all monitors.
- Test the different settings and verify they are applied:
- Activation shortcut