backport #22219
Since we changed the /api/v1/ routes to disallow session authentication
we also removed their reliance on CSRF. However, we left the
ReverseProxy authentication here - but this means that POSTs to the API
are no longer protected by CSRF.
Now, ReverseProxy authentication is a kind of session authentication,
and is therefore inconsistent with the removal of session from the API.
This PR proposes that we simply remove the ReverseProxy authentication
from the API and therefore users of the API must explicitly use tokens
or basic authentication.
Replace #22077Close#22221Close#22077
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
- Backport of #22229
- When the GPG key contains an error, such as an invalid signature or an
email address that does not match the user.A page will be shown that
says you must provide a signature for the token.
- This page had two errors: one had the wrong translation key and the
other tried to use an undefined variable
[`.PaddedKeyID`](e81ccc406b/models/asymkey/gpg_key.go (L65-L72)),
which is a function implemented on the `GPGKey` struct, given that we
don't have that, we use
[`KeyID`](e81ccc406b/routers/web/user/setting/keys.go (L102))
which is [the fingerprint of the
publickey](https://pkg.go.dev/golang.org/x/crypto/openpgp/packet#PublicKey.KeyIdString)
and is a valid way for opengpg to refer to a key.
<!--
Please check the following:
1. Make sure you are targeting the `main` branch, pull requests on
release branches are only allowed for bug fixes.
2. Read contributing guidelines:
https://github.com/go-gitea/gitea/blob/main/CONTRIBUTING.md
3. Describe what your pull request does and which issue you're targeting
(if any)
-->
- Backport of #22171
- Currently, the 'IsZero' function for 'TimeStamp' just checks if the
unix time is zero, which is not the behavior of 'Time.IsZero()', but
Gitea is using this method in accordance with the behavior of
'Time.IsZero()'.
- Adds a new condition to check for the zero time instant.
- Fixes a bug where non-expiring GPG keys where shown as they expired on
Jan 01, 0001.
- Related https://codeberg.org/Codeberg/Community/issues/791
Backport #22034
This fixes a bug where, when searching unadopted repositories, active
repositories will be listed as well. This is because the size of the
array of repository names to check is larger by one than the
`IterateBufferSize`.
For an `IterateBufferSize` of 50, the original code will pass 51
repository names but set the query to `LIMIT 50`. If all repositories in
the query are active (i.e. not unadopted) one of them will be omitted
from the result. Due to the `ORDER BY` clause it will be the oldest (or
least recently modified) one.
Co-authored-by: Christian Ullrich <christian.ullrich@traditionsa.lu>
Backport #22118
Moved files in a patch will result in git apply returning:
```
error: {filename}: No such file or directory
```
This wasn't handled by the git apply patch code. This PR adds handling
for this.
Fix#22083
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Backport of #22095
I changed it to a static condition because it needs a new version of
xorm which is only available in 1.19. This change is valid because
`SearchLatestVersions` is never called to list internal versions and
there will no change to this behaviour in <1.19.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Backport #22037.
When deleting a closed issue, we should update both `NumIssues`and
`NumClosedIssues`, or `NumOpenIssues`(`= NumIssues -NumClosedIssues`)
will be wrong. It's the same for pull requests.
Releated to #21557.
Alse fixed two harmless problems:
- The SQL to check issue/PR total numbers is wrong, that means it will
update the numbers even if they are correct.
- Replace legacy `num_issues = num_issues + 1` operations with
`UpdateRepoIssueNumbers`.
Backport #21902
Although git does expect that author names should be of the form: `NAME
<EMAIL>` some users have been able to create commits with: `<EMAIL>`
Fix#21900
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Backport #21884
Committer avatar rendered by `func AvatarByEmail` are not vertical align
as `func Avatar` does.
- Replace literals `ui avatar` and `ui avatar vm` with the constant
`DefaultAvatarClass`
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
- Backport #21856
- It's possible that the `user_redirect` table contains a user id that
no longer exists.
- Delete a user redirect upon deleting the user.
- Add a check for these dangling user redirects to check-db-consistency.
When backporting #20902 in #21058 there was a slight misbackport. It was
missed that we needed to remove the global command option before setting
the settings.
Fix#21805
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #21791
There was a bug introduced in #21352 due to a change of behaviour caused
by #19280. This causes a panic on running the default doctor checks
because the panic introduced by #19280 assumes that the only way
opts.StdOut and opts.Stderr can be set in RunOpts is deliberately.
Unfortunately, when running a git.Command the provided RunOpts can be
set, therefore if you share a common set of RunOpts these two values can
be set by the previous commands.
This PR stops using common RunOpts for the commands in that doctor check
but secondly stops RunCommand variants from changing the provided
RunOpts.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #21720.
Fix#20921.
The `ctx.Repo.GitRepo` has been used in deleting issues when the issue
is a PR.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Backport #21352
Due to a bug in presumably an older version of Gitea, multiple of my
repositories still have their HEADs pointing to a `master` branch while
the default branch on the UI is listed as `main`. This adds a `gitea
doctor` command that will fix all of the HEAD references for repos when
they're not synchronized with the default branch in the DB.
This will help with cloning to ensure that git automatically checks out
the right branch, instead of a nonexistent one.
Note: I'm not sure if I actually need to do more other than add a file
here. Will try testing this out on my server soon.
Co-authored-by: Clar Fon <15850505+clarfonthey@users.noreply.github.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #21731.
Fix#21698.
Set the last login time to the current time when activating the user
successfully.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #21597
Related:
* https://github.com/go-gitea/gitea/pull/21596#issuecomment-1291450224
There was a bug when switching language by AJAX: the irrelevant POST
requests were processed by the target page's handler.
Now, use GET instead of POST. The GET requests should be harmless.
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport (#21708)
This addresses #21707 and adds a second package test case for a
non-semver compatible version (this might be overkill though since you
could also edit the old package version to have an epoch in front and
see the error, this just seemed more flexible for the future).
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Backport #21646
A bug was introduced in #17865 where filepath.Join is used to join
putative unadopted repository owner and names together. This is
incorrect as these names are then used as repository names - which shoud
have the '/' separator. This means that adoption will not work on
Windows servers.
Fix#21632
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #21619 .
A patch to #17335.
Just like AppPath, Gitea writes its own CustomConf into git hook scripts
too. If Gitea's CustomConf changes, then the git push may fail.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Backport #21540
At the moment, If admin disable Packages, still show the Packages on the
admin dashboard.
This patch added a check to hide the Packages entry.
Backports #21459
When actions besides "delete" are performed on issues, the milestone
counter is updated. However, since deleting issues goes through a
different code path, the associated milestone's count wasn't being
updated, resulting in inaccurate counts until another issue in the same
milestone had a non-delete action performed on it.
I verified this change fixes the inaccurate counts using a local docker
build.
Co-authored-by: 6543 <6543@obermui.de>
