When migrating a repository (from GitHub) using the API (**POST** `repos/migrate`), the Code Indexer is not updated. Searching in the user interface will not return any results.
When migrating the same repository using **+/New Migration** in the web interface, the search index is updated and searching works as expected.
Caused by the fact that object `repo` is never updated with the migrated repo so `setting.Indexer.RepoIndexerEnabled && !repo.IsEmpty` in `modules/notification/indexer/indexer.go:NotifyMigrateRepository` always evaluates to `false`.
Tested with gitea:1.16.1, MariaDB:10, Breve in `Run Mode: Dev`.
Co-authored-by: Hugo Hoitink <10838836+hoitih@users.noreply.github.com>
Backport #18587
It appears that the blob-excerpt links do not work on the wiki - likely since their
introduction.
This PR adds support for the wiki on these links.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #18539
There was an unintended regression in #17917 which leads to only
repository admin commits being trusted. This PR restores the old logic.
Fix#18501
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #18562
There was an unfortunate regression in #17962 where following detection of the
UserProhibitLogin error the err is cast to a pointer by mistake.
This causes a panic due to an interface error.
Fix#18561
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #18499
* Correct use `UserID` in `SearchTeams`
- Use `UserID` in the `SearchTeams` function, currently it was useless
to pass such information. Now it does a INNER statement to `team_user`
which obtains UserID -> TeamID data.
- Make OrgID optional.
- Resolves#18484
* Seperate searching specific user
* Add condition back
* Use correct struct type
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Backport #18495
* Fix OAuth Source Edit Page to ensure restricted and group settings are set
* Also tolerate []interface in the groups
Fix#18432
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #18414
The endpoint /{username}/{reponame}/milestone/{id} is not currently restricted to
the repo. This PR restricts the milestones to those within the repo.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix partial cloning a repo (#18373)
- Backport from: #18373
- Backport isn't 1-1, because the frontport had a refactor in that area,
which v1.16 doesn't have.
* Include diff & use copy
* Add partial clone test
* patch
* Apply suggestions from code review
* globalArgs first
* avoid copy but make GlobalCMDArgs append first
* please linter
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
* Stop trimming preceding and suffixing spaces from editor filenames
In #5702 it was decided to trim preceding and suffixed spaces aswell as / from
editing file filenames. This was because at this point in time the url-safety of
Gitea was much poorer.
We can now drop this requirement and file editing should work correctly.
Fix#18176
Signed-off-by: Andrew Thornton <art27@cantab.net>
When generating the commits list and number of files changed for PRs and
compare we should use "..." always not "..".
Fix#18303
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Return nicer error if trying to pull from non-existent user
Gitea serv will currently return an 500 if we try to pull from a repository where
the owner does not exist.
This PR checks for the UserNotExist Error when checking for the user and will
return a NotFound error instead.
Fix#18225
This contains some additional fixes and small nits related to #17957
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Migrate from U2F to Webauthn
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#17514
Given the comments I've adjusted this somewhat. The numbers of characters detected are increased and include things like the use of U+300 to make à instead of à and non-breaking spaces.
There is a button which can be used to escape the content to show it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Gwyneth Morgan <gwymor@tilde.club>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Team permission allow different unit has different permission
* Finish the interface and the logic
* Fix lint
* Fix translation
* align center for table cell content
* Fix fixture
* merge
* Fix test
* Add deprecated
* Improve code
* Add tooltip
* Fix swagger
* Fix newline
* Fix tests
* Fix tests
* Fix test
* Fix test
* Max permission of external wiki and issues should be read
* Move team units with limited max level below units table
* Update label and column names
* Some improvements
* Fix lint
* Some improvements
* Fix template variables
* Add permission docs
* improve doc
* Fix fixture
* Fix bug
* Fix some bug
* fix
* gofumpt
* Integration test for migration (#18124)
integrations: basic test for Gitea {dump,restore}-repo
This is a first step for integration testing of DumpRepository and
RestoreRepository. It:
runs a Gitea server,
dumps a repo via DumpRepository to the filesystem,
restores the repo via RestoreRepository from the filesystem,
dumps the restored repository to the filesystem,
compares the first and second dump and expects them to be identical
The verification is trivial and the goal is to add more tests for each
topic of the dump.
Signed-off-by: Loïc Dachary <loic@dachary.org>
* Team permission allow different unit has different permission
* Finish the interface and the logic
* Fix lint
* Fix translation
* align center for table cell content
* Fix fixture
* merge
* Fix test
* Add deprecated
* Improve code
* Add tooltip
* Fix swagger
* Fix newline
* Fix tests
* Fix tests
* Fix test
* Fix test
* Max permission of external wiki and issues should be read
* Move team units with limited max level below units table
* Update label and column names
* Some improvements
* Fix lint
* Some improvements
* Fix template variables
* Add permission docs
* improve doc
* Fix fixture
* Fix bug
* Fix some bug
* Fix bug
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
* Add API to get issue/pull comments and events (timeline)
Adds an API to get both comments and events in one endpoint with all required data.
Closesgo-gitea/gitea#13250
* Fix swagger
* Don't show code comments (use review api instead)
* fmt
* Fix comment
* Time -> TrackedTime
* Use var directly
* Add logger
* Fix lint
* Fix test
* Add comments
* fmt
* [test] get issue directly by ID
* Update test
* Add description for changed refs
* Fix build issues + lint
* Fix build
* Use string enums
* Update swagger
* Support `page` and `limit` params
* fmt + swagger
* Use global slices
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR reworked the Find pointer files feature in Settings -> LFS page.
When a LFS object is missing from database but exists in LFS content store, admin can associate it to the repository by clicking the Associate button.
This PR is not perfect (because the LFS module itself should be improved too), it's just a nice-to-have feature to help users recover their LFS repositories (eg: database was lost / table was truncated)
A consequence of forcibly setting the RoutePath to the escaped url is that the
auto routing to endpoints without terminal slashes fails (Causing #18060.) This
failure raises the possibility that forcibly setting the RoutePath causes other
unexpected behaviors too.
Therefore, instead we should simply pre-escape the URL in the process registering
handler. Then the request URL will be properly escaped for all the following calls.
Fix#17938Fix#18060
Replace #18062
Replace #17997
Signed-off-by: Andrew Thornton <art27@cantab.net>
User would keep seeing an empty repo if:
* An error occurs during the first git pushing/receiving
* A user replaces the Gitea's empty repository manually
Fix: when a user is viewing the repository web page, if the repoModal.IsEmpty is true, we check the git repository again to detect whether it is really empty.
However: the IsEmpty flag is deeply broken and should be removed. For example it's possible for a repository to be non-empty by that flag but still 500 because there are no branches - only tags -or the default branch is non-extant as it has been 0-pushed.
a custom name, intended to be used when there's a name conflict
- When a fork request results in a name conflict, HTTP 409: Conflict is
returned instead of 500
- API documentation for the above mentioned changes
Signed-off-by: realaravinth <realaravinth@batsense.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Git will and can pack references into packfiles and therefore if you write/read the
files directly you will get false results. Instead you should use update-ref and
show-ref. To that end I have created three new functions in git/repo_commit.go that
will do this correctly.
Related #17191
Signed-off-by: Andrew Thornton <art27@cantab.net>
PR #17997 means that urls with terminal '/' are no longer immediately mapped
to the url without a terminal slash. However, it has revealed that the NotFound handler
appears to have been lost.
This PR adds back in a NotFound handler that simply redirects to a path without the
terminal slash or runs the NotFound handler.
Fix#18060
Signed-off-by: Andrew Thornton <art27@cantab.net>
Repository Transfer requires that the repository directory is renamed - which
is not possible on Windows if the git repository is open.
Fix#17885
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The current code unfortunately requires that `action` be a reserved
repository name as it prevents posts to change the settings for
action repositories. However, we can simply change action handler
to work on POST /{username} instead.
Fix#18037
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Reset Session ID on login
When logging in the SessionID should be reset and the session cleaned up.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* with new session.RegenerateID function
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update go-chi/session
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Ensure that session id is changed after oauth data is set and between account linking pages too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per review
Signed-off-by: Andrew Thornton <art27@cantab.net>
