mongoose/examples/nxp/frdm-mcxn947-xpresso-freertos-builtin/board/pin_mux.c

706 lines
53 KiB
C
Raw Normal View History

2024-06-14 00:42:15 +08:00
/*
* Copyright 2022-2023 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v14.0
processor: MCXN947
package_id: MCXN947VDF
mcu_data: ksdk2_0
processor_version: 0.14.19
board: FRDM-MCXN947
expansion_headers:
- id: micro_bus
name: mikroBUS(TM)
connectors:
- id: C1
name: J6
pins:
- {id: 1, name: AN, pin_num: T2, pin_signal: ADC1_A0}
- {id: 2, name: RST, pin_num: B4, pin_signal: PIO1_3/WUU0_IN7/TRIG_OUT1/FC3_P3/CT1_MAT1/SCT0_IN7/FLEXIO0_D11/ENET0_MDIO/SAI1_RXD0/CAN0_RXD/TSI0_CH3/ADC0_A19/CMP0_IN1}
- {id: 3, name: CS, pin_num: M15, pin_signal: PIO3_23/FC6_P3/CT_INP11/PWM1_X3/FLEXIO0_D31/SAI1_TXD1}
- {id: 4, name: SCK, pin_num: L16, pin_signal: PIO3_21/TRIG_OUT1/FC8_P5/FC6_P1/CT2_MAT3/PWM1_B3/FLEXIO0_D29/SIM0_RST/SAI1_RXD0}
- {id: 5, name: MISO, pin_num: M16, pin_signal: PIO3_22/FC8_P6/FC6_P2/CT_INP10/PWM1_X2/FLEXIO0_D30/SIM0_VCCEN/SAI1_RXD1}
- {id: 6, name: MOSI, pin_num: M17, pin_signal: PIO3_20/WUU0_IN27/TRIG_OUT0/FC8_P4/FC6_P0/CT2_MAT2/PWM1_A3/FLEXIO0_D28/SIM0_PD/SAI1_TXD0}
- id: C2
name: J5
pins:
- {id: 1, name: PWM, pin_num: K17, pin_signal: PIO3_19/FC7_P6/CT2_MAT1/PWM1_X1/FLEXIO0_D27/SAI1_RX_FS}
- {id: 2, name: INT, pin_num: L13, pin_signal: PIO5_7/TRIG_IN11/TAMPER5/ADC1_B15}
- {id: 3, name: RX, pin_num: F6, pin_signal: PIO1_16/WUU0_IN14/FC5_P0/FC3_P4/CT_INP12/SCT0_OUT6/FLEXIO0_D24/PLU_OUT4/ENET0_RXD2/I3C1_SDA/ADC1_A16}
- {id: 4, name: TX, pin_num: F4, pin_signal: PIO1_17/FC5_P1/FC3_P5/CT_INP13/SCT0_OUT7/FLEXIO0_D25/PLU_OUT5/ENET0_RXD3/I3C1_SCL/ADC1_A17}
- {id: 5, name: SCL, pin_num: C5, pin_signal: PIO1_1/TRIG_IN1/FC3_P1/FC4_P5/CT_INP5/SCT0_OUT7/FLEXIO0_D9/SAI1_TX_FS/TSI0_CH1/ADC0_A17/CMP1_IN0}
- {id: 6, name: SDA, pin_num: C6, pin_signal: PIO1_0/WUU0_IN6/LPTMR0_ALT3/TRIG_IN0/FC3_P0/FC4_P4/CT_INP4/SCT0_OUT6/FLEXIO0_D8/SAI1_TX_BCLK/TSI0_CH0/ADC0_A16/CMP0_IN0}
- id: frdm_arduino
name: LPCXpresso V3 (Arduino compatible)
connectors:
- id: C1
name: J3
pins:
- {id: 1, pin_num: H2, pin_signal: PIO2_0/TRIG_IN5/FC9_P6/SDHC0_D5/SCT0_IN0/PWM1_A3/FLEXIO0_D8/FLEXSPI0_B_SS1_b/SAI0_RX_BCLK}
- {id: 2, pin_num: U2, pin_signal: DAC2_OUT/ADC0_A3/ADC1_A3}
- {id: 3, pin_num: L4, pin_signal: PIO1_22/TRIG_IN3/FC5_P6/FC4_P2/CT_INP14/SCT0_OUT4/FLEXIO0_D30/ADC1_A22}
- {id: 5, pin_num: J3, pin_signal: PIO2_3/FC9_P1/SDHC0_D0/SCT0_OUT1/PWM1_B2/FLEXIO0_D11/FLEXSPI0_B_SCLK/SINC0_MBIT0/SAI0_RXD0}
- {id: 6, pin_num: F3, pin_signal: RESET_B}
- {id: 7, pin_num: H3, pin_signal: PIO2_2/WUU0_IN16/CLKOUT/FC9_P3/SDHC0_D1/SCT0_OUT0/PWM1_A2/FLEXIO0_D10/FLEXSPI0_B_SS0_b/SINC0_MCLK0/SAI0_TXD0}
- {id: 9, pin_num: K1, pin_signal: PIO2_5/TRIG_OUT3/FC9_P2/SDHC0_CMD/SCT0_OUT3/PWM1_B1/FLEXIO0_D13/FLEXSPI0_B_DATA1/SINC0_MBIT1/SAI0_TXD1}
- {id: 11, pin_num: K3, pin_signal: PIO2_4/WUU0_IN17/FC9_P0/SDHC0_CLK/SCT0_OUT2/PWM1_A1/FLEXIO0_D12/FLEXSPI0_B_DATA0/SINC0_MCLK1/SAI0_RXD1}
- {id: 13, pin_num: L2, pin_signal: PIO2_7/TRIG_IN5/FC9_P5/SDHC0_D2/SCT0_OUT5/PWM1_B0/FLEXIO0_D15/FLEXSPI0_B_DATA3/SINC0_MBIT2/SAI0_TX_FS}
- {id: 15, pin_num: K2, pin_signal: PIO2_6/TRIG_IN4/FC9_P4/SDHC0_D3/SCT0_OUT4/PWM1_A0/FLEXIO0_D14/FLEXSPI0_B_DATA2/SINC0_MCLK2/SAI0_TX_BCLK}
- id: C2
name: J2
pins:
- {id: 1, pin_num: T3, pin_signal: ADC1_B0}
- {id: 2, pin_num: E8, pin_signal: PIO0_28/FC1_P4/FC0_P4/CT_INP0/ADC0_B20}
- {id: 3, pin_num: M10, pin_signal: PIO5_2/VBAT_WAKEUP_b/SPC_LPREQ/TAMPER0/ADC1_B10}
- {id: 4, pin_num: B12, pin_signal: PIO0_10/FC0_P6/CT0_MAT0/FLEXIO0_D2/ADC0_B10}
- {id: 5, pin_num: N11, pin_signal: PIO5_3/TRIG_IN11/RTC_CLKOUT/TAMPER1/ADC1_B11}
- {id: 6, pin_num: E10, pin_signal: PIO0_27/FC1_P3/CT0_MAT3/ADC0_B19}
- {id: 7, pin_num: M12, pin_signal: PIO5_4/TRIG_OUT7/SPC_LPREQ/TAMPER2/ADC1_B12}
- {id: 8, pin_num: B6, pin_signal: PIO0_24/FC1_P0/CT0_MAT0/ADC0_B16}
- {id: 9, pin_num: B15, pin_signal: PIO0_3/TDI/FC1_P3/CT0_MAT1/UTICK_CAP1/HSCMP0_OUT/CMP1_IN1}
- {id: 10, pin_num: F10, pin_signal: PIO0_26/FC1_P2/CT0_MAT2/ADC0_B18}
- {id: 11, pin_num: C10, pin_signal: PIO0_18/EWM0_IN/FC0_P2/CT0_MAT2/FLEXIO0_D2/HSCMP0_OUT/PDM0_DATA1/TSI0_CH13/ADC0_A10}
- {id: 12, pin_num: A6, pin_signal: PIO0_25/FC1_P1/CT0_MAT1/ADC0_B17}
- {id: 13, pin_num: C9, pin_signal: PIO0_19/WUU0_IN3/EWM0_OUT_b/FC0_P3/CT0_MAT3/FLEXIO0_D3/HSCMP1_OUT/TSI0_CH14/ADC0_A11}
- {id: 15, pin_num: C5, pin_signal: PIO1_1/TRIG_IN1/FC3_P1/FC4_P5/CT_INP5/SCT0_OUT7/FLEXIO0_D9/SAI1_TX_FS/TSI0_CH1/ADC0_A17/CMP1_IN0}
- {id: 17, pin_num: C6, pin_signal: PIO1_0/WUU0_IN6/LPTMR0_ALT3/TRIG_IN0/FC3_P0/FC4_P4/CT_INP4/SCT0_OUT6/FLEXIO0_D8/SAI1_TX_BCLK/TSI0_CH0/ADC0_A16/CMP0_IN0}
- {id: 18, pin_num: P1, pin_signal: PIO4_0/WUU0_IN18/TRIG_IN6/FC2_P0/CT_INP16/PLU_IN0/SINC0_MCLK3}
- {id: 20, pin_num: P2, pin_signal: PIO4_1/TRIG_IN7/FC2_P1/CT_INP17/PLU_IN1}
- id: C3
name: J1
pins:
- {id: 1, pin_num: J15, pin_signal: PIO3_16/FC8_P2/CT_INP8/PWM1_A2/FLEXIO0_D24/SIM0_CLK/SAI1_TX_BCLK}
- {id: 2, pin_num: U1, pin_signal: PIO4_3/WUU0_IN19/TRIG_IN7/FC2_P3/CT_INP13/PLU_IN3/DAC1_OUT/ADC0_B4/ADC1_B4/CMP0_IN5N/CMP1_IN5N/CMP2_IN5N}
- {id: 3, pin_num: T7, pin_signal: PIO4_13/TRIG_IN8/FC2_P1/USB1_ID/CT4_MAT1/FLEXIO0_D21/PLU_OUT1/SINC0_MBIT0/CAN0_TXD/OPAMP0_INP1/ADC0_B5/ADC1_B5}
- {id: 4, pin_num: T1, pin_signal: PIO4_2/TRIG_IN6/FC2_P2/CT_INP12/PLU_IN2/SINC0_MBIT3/DAC0_OUT/ADC0_A4/ADC1_A4/CMP0_IN4N/CMP1_IN4N/CMP2_IN4N}
- {id: 5, pin_num: M17, pin_signal: PIO3_20/WUU0_IN27/TRIG_OUT0/FC8_P4/FC6_P0/CT2_MAT2/PWM1_A3/FLEXIO0_D28/SIM0_PD/SAI1_TXD0}
- {id: 6, pin_num: F8, pin_signal: PIO0_29/FC1_P5/FC0_P5/CT_INP1/ADC0_B21}
- {id: 7, pin_num: L5, pin_signal: PIO1_21/TRIG_OUT2/FC5_P5/FC4_P1/CT3_MAT3/SCT0_OUT9/FLEXIO0_D29/PLU_OUT7/ENET0_MDIO/SAI1_MCLK/CAN1_RXD/ADC1_A21/CMP2_IN3}
- {id: 8, pin_num: M4, pin_signal: PIO1_23/FC4_P3/CT_INP15/SCT0_OUT5/FLEXIO0_D31/ADC1_A23}
- {id: 9, pin_num: K16, pin_signal: PIO3_18/FC6_P6/CT2_MAT0/PWM1_X0/FLEXIO0_D26/SAI1_RX_BCLK}
- {id: 10, pin_num: E7, pin_signal: PIO0_30/FC1_P6/FC0_P6/CT_INP2/ADC0_B22}
- {id: 11, pin_num: K15, pin_signal: PIO3_17/WUU0_IN26/FC8_P3/CT_INP9/PWM1_B2/FLEXIO0_D25/SIM0_IO/SAI1_TX_FS}
- {id: 12, pin_num: L5, pin_signal: PIO1_21/TRIG_OUT2/FC5_P5/FC4_P1/CT3_MAT3/SCT0_OUT9/FLEXIO0_D29/PLU_OUT7/ENET0_MDIO/SAI1_MCLK/CAN1_RXD/ADC1_A21/CMP2_IN3}
- {id: 13, pin_num: K17, pin_signal: PIO3_19/FC7_P6/CT2_MAT1/PWM1_X1/FLEXIO0_D27/SAI1_RX_FS}
- {id: 14, pin_num: C4, pin_signal: PIO1_2/TRIG_OUT0/FC3_P2/FC4_P6/CT1_MAT0/SCT0_IN6/FLEXIO0_D10/ENET0_MDC/SAI1_TXD0/CAN0_TXD/TSI0_CH2/ADC0_A18/CMP2_IN0}
- {id: 15, pin_num: L16, pin_signal: PIO3_21/TRIG_OUT1/FC8_P5/FC6_P1/CT2_MAT3/PWM1_B3/FLEXIO0_D29/SIM0_RST/SAI1_RXD0}
- {id: 16, pin_num: D7, pin_signal: PIO0_31/CT_INP3/ADC0_B23}
- id: C4
name: J4
pins:
- {id: 1, pin_num: T6, pin_signal: PIO4_12/WUU0_IN20/USB0_VBUS_DET/FC2_P0/CT4_MAT0/FLEXIO0_D20/PLU_OUT0/SINC0_MCLK0/CAN0_RXD/OPAMP0_INP0/ADC0_A5/ADC1_A5}
- {id: 2, pin_num: P3, pin_signal: ADC0_A0}
- {id: 3, pin_num: U6, pin_signal: OPAMP0_INN}
- {id: 4, pin_num: R3, pin_signal: ADC0_B0}
- {id: 5, pin_num: R8, pin_signal: PIO4_16/FC2_P2/USB1_OTG_PWR/CT3_MAT0/FLEXIO0_D24/PLU_OUT4/SINC0_MCLK1/CAN1_TXD/OPAMP1_INP0/ADC0_A6}
- {id: 6, pin_num: E11, pin_signal: PIO0_14/FC1_P6/FC0_P2/CT_INP2/UTICK_CAP0/FLEXIO0_D6/ADC0_B14}
- {id: 7, pin_num: U8, pin_signal: OPAMP1_INN}
- {id: 8, pin_num: B8, pin_signal: PIO0_22/EWM0_IN/FC0_P6/FC1_P2/CT_INP2/FLEXIO0_D6/I3C0_PUR/ADC0_A14/CMP1_IN2}
- {id: 9, pin_num: T10, pin_signal: PIO4_20/TRIG_IN8/FC2_P4/CT2_MAT0/FLEXIO0_D28/SINC0_MCLK2/OPAMP2_INP0/ADC1_A6}
- {id: 10, pin_num: G13, pin_signal: PIO0_15/FC0_P3/CT_INP3/UTICK_CAP1/FLEXIO0_D7/ADC0_B15}
- {id: 11, pin_num: U10, pin_signal: OPAMP2_INN}
- {id: 12, pin_num: B7, pin_signal: PIO0_23/WUU0_IN5/EWM0_OUT_b/FC1_P3/CT_INP3/FLEXIO0_D7/ADC0_A15/CMP2_IN2}
- {id: frdm_arduino, name: LPCXpressoV2/V3 Expansion Header}
- {id: micro_bus, name: mikroBUS Click Header}
external_user_signals: {}
pin_labels:
- {pin_num: A1, pin_signal: PIO1_8/WUU0_IN10/LPTMR1_ALT3/TRACE_DATA0/FC4_P0/FC5_P4/CT_INP8/SCT0_OUT2/FLEXIO0_D16/PLU_OUT0/ENET0_TXD2/I3C1_SDA/TSI0_CH17/ADC1_A8, label: 'P1_8/J9[32]',
identifier: DEBUG_UART_RX}
- {pin_num: B1, pin_signal: PIO1_9/TRACE_DATA1/FC4_P1/FC5_P5/CT_INP9/SCT0_OUT3/FLEXIO0_D17/PLU_OUT1/ENET0_TXD3/I3C1_SCL/TSI0_CH18/ADC1_A9, label: 'P1_9/J9[30]', identifier: DEBUG_UART_TX}
- {pin_num: D1, pin_signal: PIO1_13/TRIG_IN3/FC4_P5/FC3_P1/CT2_MAT3/SCT0_OUT5/FLEXIO0_D21/PLU_OUT3/ENET0_RXDV/CAN1_TXD/TSI0_CH22/ADC1_A13, label: 'P1_13/J9[27]'}
- {pin_num: F1, pin_signal: PIO1_30/TRIG_OUT3/CT_INP16/SCT0_OUT8/SAI0_MCLK/XTAL48M, label: 'P1_30/XTAL/Y1[1]'}
- {pin_num: H1, pin_signal: PIO2_1/TRACE_CLK/SDHC0_D4/SCT0_IN1/PWM1_B3/FLEXIO0_D9/FLEXSPI0_B_DQS/SINC0_MCLK_OUT0/SAI0_RX_FS, label: 'P2_1/TP27/J12[9]'}
- {pin_num: K1, pin_signal: PIO2_5/TRIG_OUT3/FC9_P2/SDHC0_CMD/SCT0_OUT3/PWM1_B1/FLEXIO0_D13/FLEXSPI0_B_DATA1/SINC0_MBIT1/SAI0_TXD1, label: 'P2_5/TP25/J12[3]/J3[9]/SJ6[3]'}
- {pin_num: M1, pin_signal: PIO2_9/TRACE_DATA1/SDHC0_D6/SCT0_IN3/PWM1_X1/FLEXIO0_D17/FLEXSPI0_B_DATA5/SINC0_MBIT3/SAI1_RXD0, label: 'P2_9/J8[14]'}
- {pin_num: P1, pin_signal: PIO4_0/WUU0_IN18/TRIG_IN6/FC2_P0/CT_INP16/PLU_IN0/SINC0_MCLK3, label: 'P4_0/J8[4]/SJ14[1]'}
- {pin_num: T1, pin_signal: PIO4_2/TRIG_IN6/FC2_P2/CT_INP12/PLU_IN2/SINC0_MBIT3/DAC0_OUT/ADC0_A4/ADC1_A4/CMP0_IN4N/CMP1_IN4N/CMP2_IN4N, label: 'P4_2/J1[4]'}
- {pin_num: U1, pin_signal: PIO4_3/WUU0_IN19/TRIG_IN7/FC2_P3/CT_INP13/PLU_IN3/DAC1_OUT/ADC0_B4/ADC1_B4/CMP0_IN5N/CMP1_IN5N/CMP2_IN5N, label: 'P4_3/J1[2]'}
- {pin_num: A2, pin_signal: PIO1_7/WUU0_IN9/TRIG_OUT2/FC5_P3/CT_INP7/SCT0_IN1/FLEXIO0_D15/PLU_CLK/ENET0_TXD1/SAI1_RX_FS/CAN1_RXD/TSI0_CH7/ADC0_A23, label: 'P1_7/J9[9]'}
- {pin_num: B2, pin_signal: PIO1_6/TRIG_IN2/FC3_P6/FC5_P2/CT_INP6/SCT0_IN0/FLEXIO0_D14/ENET0_TXD0/SAI1_RX_BCLK/CAN1_TXD/TSI0_CH6/ADC0_A22, label: 'P1_6/J9[10]'}
- {pin_num: D2, pin_signal: PIO1_12/WUU0_IN12/TRACE_CLK/FC4_P4/FC3_P0/CT2_MAT2/SCT0_OUT4/FLEXIO0_D20/PLU_OUT2/ENET0_RXER/CAN1_RXD/TSI0_CH21/ADC1_A12, label: 'P1_12/J2[11]/J9[28]'}
- {pin_num: F2, pin_signal: PIO1_31/TRIG_IN4/CT_INP17/SCT0_OUT9/EXTAL48M, label: 'P1_31/EXTAL/Y1[3]'}
- {pin_num: G2, pin_signal: VSS0, label: GND}
- {pin_num: H2, pin_signal: PIO2_0/TRIG_IN5/FC9_P6/SDHC0_D5/SCT0_IN0/PWM1_A3/FLEXIO0_D8/FLEXSPI0_B_SS1_b/SAI0_RX_BCLK, label: 'P2_0/J3[1]/SJ8[3]'}
- {pin_num: K2, pin_signal: PIO2_6/TRIG_IN4/FC9_P4/SDHC0_D3/SCT0_OUT4/PWM1_A0/FLEXIO0_D14/FLEXSPI0_B_DATA2/SINC0_MCLK2/SAI0_TX_BCLK, label: 'P2_6/TP24/J12[2]/J3[15]/SJ1[3]'}
- {pin_num: L2, pin_signal: PIO2_7/TRIG_IN5/FC9_P5/SDHC0_D2/SCT0_OUT5/PWM1_B0/FLEXIO0_D15/FLEXSPI0_B_DATA3/SINC0_MBIT2/SAI0_TX_FS, label: 'P2_7/TP23/J12[1]/J3[13]/SJ3[3]'}
- {pin_num: M2, pin_signal: PIO2_8/TRACE_DATA0/SDHC0_D7/SCT0_IN2/PWM1_X0/FLEXIO0_D16/FLEXSPI0_B_DATA4/SINC0_MCLK3/SAI1_TXD0, label: 'P2_8/J8[13]'}
- {pin_num: P2, pin_signal: PIO4_1/TRIG_IN7/FC2_P1/CT_INP17/PLU_IN1, label: 'P4_1/J8[3]/SJ15[1]'}
- {pin_num: T2, pin_signal: ADC1_A0, label: 'ANA_4/ADC1_A0/J6[1]'}
- {pin_num: U2, pin_signal: DAC2_OUT/ADC0_A3/ADC1_A3, label: 'ANA_6/ADC0_A3/J3[2]'}
- {pin_num: B3, pin_signal: PIO1_5/FREQME_CLK_IN1/FC3_P5/FC5_P1/CT1_MAT3/SCT0_OUT1/FLEXIO0_D13/ENET0_TXEN/SAI0_RXD1/TSI0_CH5/ADC0_A21/CMP0_IN3, label: 'P1_5/J9[7]'}
- {pin_num: C3, pin_signal: PIO1_10/TRACE_DATA2/FC4_P2/FC5_P6/CT2_MAT0/SCT0_IN2/FLEXIO0_D18/PLU_IN0/ENET0_TXER/CAN0_TXD/TSI0_CH19/ADC1_A10, label: 'P1_10/SJ20[3]/SJ16[2]'}
- {pin_num: D3, pin_signal: PIO1_11/WUU0_IN11/TRACE_DATA3/FC4_P3/CT2_MAT1/SCT0_IN3/FLEXIO0_D19/PLU_IN1/ENET0_RX_CLK/I3C1_PUR/CAN0_RXD/TSI0_CH20/ADC1_A11, label: 'P1_11/SJ26[2]'}
- {pin_num: F3, pin_signal: RESET_B, label: 'RESET_B/J23[10]/D16[1]/SW1[3]/SW1[4]/J3[6]', identifier: SW1}
- {pin_num: H3, pin_signal: PIO2_2/WUU0_IN16/CLKOUT/FC9_P3/SDHC0_D1/SCT0_OUT0/PWM1_A2/FLEXIO0_D10/FLEXSPI0_B_SS0_b/SINC0_MCLK0/SAI0_TXD0, label: 'P2_2/TP5/J12[8]/J3[7]/SJ7[3]'}
- {pin_num: J3, pin_signal: PIO2_3/FC9_P1/SDHC0_D0/SCT0_OUT1/PWM1_B2/FLEXIO0_D11/FLEXSPI0_B_SCLK/SINC0_MBIT0/SAI0_RXD0, label: 'P2_3/TP4/J12[7]/J3[5]/SJ4[3]'}
- {pin_num: K3, pin_signal: PIO2_4/WUU0_IN17/FC9_P0/SDHC0_CLK/SCT0_OUT2/PWM1_A1/FLEXIO0_D12/FLEXSPI0_B_DATA0/SINC0_MCLK1/SAI0_RXD1, label: 'P2_4/TP26/J12[5]/J3[11]/SJ5[3]'}
- {pin_num: M3, pin_signal: PIO2_10/TRACE_DATA2/SCT0_IN4/PWM1_X2/FLEXIO0_D18/FLEXSPI0_B_DATA6/SINC0_MCLK4/SAI1_RXD1, label: 'P2_10/J8[15]'}
- {pin_num: P3, pin_signal: ADC0_A0, label: 'ADC0_A0/ARD_A0/J4[2]'}
- {pin_num: R3, pin_signal: ADC0_B0, label: 'ADC0_B0/ARD_A1/J4[4]'}
- {pin_num: T3, pin_signal: ADC1_B0, label: 'ADC1_B0/MC_BEMF_A/J2[1]'}
- {pin_num: A4, pin_signal: PIO1_4/WUU0_IN8/FREQME_CLK_IN0/FC3_P4/FC5_P0/CT1_MAT2/SCT0_OUT0/FLEXIO0_D12/ENET0_TX_CLK/SAI0_TXD1/TSI0_CH4/ADC0_A20/CMP0_IN2, label: 'P1_4/SJ27[2]'}
- {pin_num: B4, pin_signal: PIO1_3/WUU0_IN7/TRIG_OUT1/FC3_P3/CT1_MAT1/SCT0_IN7/FLEXIO0_D11/ENET0_MDIO/SAI1_RXD0/CAN0_RXD/TSI0_CH3/ADC0_A19/CMP0_IN1, label: 'P1_3/J6[2]'}
- {pin_num: C4, pin_signal: PIO1_2/TRIG_OUT0/FC3_P2/FC4_P6/CT1_MAT0/SCT0_IN6/FLEXIO0_D10/ENET0_MDC/SAI1_TXD0/CAN0_TXD/TSI0_CH2/ADC0_A18/CMP2_IN0, label: 'P1_2/SJ4[1]',
identifier: LED_BLUE}
- {pin_num: D4, pin_signal: PIO1_14/FC4_P6/FC3_P2/CT_INP10/SCT0_IN4/FLEXIO0_D22/PLU_IN2/ENET0_RXD0/TSI0_CH23/ADC1_A14, label: 'P1_14/J9[2]'}
- {pin_num: E4, pin_signal: PIO1_15/WUU0_IN13/FC3_P3/CT_INP11/SCT0_IN5/FLEXIO0_D23/PLU_IN3/ENET0_RXD1/I3C1_PUR/TSI0_CH24/ADC1_A15, label: 'P1_15/J9[1]'}
- {pin_num: F4, pin_signal: PIO1_17/FC5_P1/FC3_P5/CT_INP13/SCT0_OUT7/FLEXIO0_D25/PLU_OUT5/ENET0_RXD3/I3C1_SCL/ADC1_A17, label: 'P1_17/SJ15[3]/J5[4]/J9[3]'}
- {pin_num: G4, pin_signal: PIO1_18/FREQME_CLK_IN0/FC5_P2/FC3_P6/CT3_MAT0/SCT0_IN6/FLEXIO0_D26/PLU_IN4/ENET0_COL/CAN0_TXD/ADC1_A18, label: 'P1_18/J9[6]'}
- {pin_num: J4, pin_signal: VSS1, label: GND}
- {pin_num: L4, pin_signal: PIO1_22/TRIG_IN3/FC5_P6/FC4_P2/CT_INP14/SCT0_OUT4/FLEXIO0_D30/ADC1_A22, label: 'P1_22/J9[24]/J3[3]/SJ9[3]'}
- {pin_num: M4, pin_signal: PIO1_23/FC4_P3/CT_INP15/SCT0_OUT5/FLEXIO0_D31/ADC1_A23, label: 'P1_23/J9[23]/SJ1[1]'}
- {pin_num: N4, pin_signal: PIO2_11/TRACE_DATA3/SCT0_IN5/PWM1_X3/FLEXIO0_D19/FLEXSPI0_B_DATA7/SINC0_MBIT4/SAI1_TXD1, label: 'P2_11/J8[16]'}
- {pin_num: P4, pin_signal: VDD_P40, label: VDD_P4}
- {pin_num: R4, pin_signal: VDD_ANA, label: 'VDD_ANA/J2[16]'}
- {pin_num: T4, pin_signal: PIO4_7/CT_INP19, label: 'P4_7/J8[7]'}
- {pin_num: U4, pin_signal: VREFO/ADC0_A7/ADC1_A7, label: VREFO/TP1}
- {pin_num: C5, pin_signal: PIO1_1/TRIG_IN1/FC3_P1/FC4_P5/CT_INP5/SCT0_OUT7/FLEXIO0_D9/SAI1_TX_FS/TSI0_CH1/ADC0_A17/CMP1_IN0, label: 'P1_1/J5[5]/J2[15]'}
- {pin_num: E5, pin_signal: VSS3, label: GND}
- {pin_num: G5, pin_signal: PIO1_19/WUU0_IN15/FREQME_CLK_IN1/FC5_P3/CT3_MAT1/SCT0_IN7/FLEXIO0_D27/PLU_IN5/ENET0_CRS/CAN0_RXD/ADC1_A19, label: 'P1_19/J9[5]'}
- {pin_num: H5, pin_signal: VSS2, label: GND}
- {pin_num: K5, pin_signal: PIO1_20/TRIG_IN2/FC5_P4/FC4_P0/CT3_MAT2/SCT0_OUT8/FLEXIO0_D28/PLU_OUT6/ENET0_MDC/CAN1_TXD/ADC1_A20/CMP1_IN3, label: P1_20}
- {pin_num: L5, pin_signal: PIO1_21/TRIG_OUT2/FC5_P5/FC4_P1/CT3_MAT3/SCT0_OUT9/FLEXIO0_D29/PLU_OUT7/ENET0_MDIO/SAI1_MCLK/CAN1_RXD/ADC1_A21/CMP2_IN3, label: 'P1_21/SJ3[1]/J1[7]'}
- {pin_num: N5, pin_signal: VDD_P41, label: VDD_P4}
- {pin_num: R5, pin_signal: VREFH, label: VREFH}
- {pin_num: A6, pin_signal: PIO0_25/FC1_P1/CT0_MAT1/ADC0_B17, label: 'P0_25/J2[12]'}
- {pin_num: B6, pin_signal: PIO0_24/FC1_P0/CT0_MAT0/ADC0_B16, label: 'P0_24/SJ7[1]'}
- {pin_num: C6, pin_signal: PIO1_0/WUU0_IN6/LPTMR0_ALT3/TRIG_IN0/FC3_P0/FC4_P4/CT_INP4/SCT0_OUT6/FLEXIO0_D8/SAI1_TX_BCLK/TSI0_CH0/ADC0_A16/CMP0_IN0, label: 'P1_0/J5[6]/J2[17]'}
- {pin_num: N13, pin_signal: VSS4, label: GND}
- {pin_num: F6, pin_signal: PIO1_16/WUU0_IN14/FC5_P0/FC3_P4/CT_INP12/SCT0_OUT6/FLEXIO0_D24/PLU_OUT4/ENET0_RXD2/I3C1_SDA/ADC1_A16, label: 'P1_16/SJ14[3]/J5[3]/J9[4]'}
- {pin_num: H6, pin_signal: VDD1, label: VDD_P0/1}
- {pin_num: K6, pin_signal: VDD_LDO_CORE, label: VDD_LDO_CORE_IN}
- {pin_num: M6, pin_signal: PIO4_4/FC2_P4/CT_INP14/PLU_IN4/SINC0_MCLK4, label: 'P4_4/J9[26]'}
- {pin_num: P6, pin_signal: VSS_P41, label: GND}
- {pin_num: R6, pin_signal: VREFL, label: AGND}
- {pin_num: T6, pin_signal: PIO4_12/WUU0_IN20/USB0_VBUS_DET/FC2_P0/CT4_MAT0/FLEXIO0_D20/PLU_OUT0/SINC0_MCLK0/CAN0_RXD/OPAMP0_INP0/ADC0_A5/ADC1_A5, label: 'P4_12/SJ25[1]/J8[17]'}
- {pin_num: U6, pin_signal: OPAMP0_INN, label: 'OPAMP0_INN/RSHUNT_CURA_N/SJ24[1]'}
- {pin_num: B7, pin_signal: PIO0_23/WUU0_IN5/EWM0_OUT_b/FC1_P3/CT_INP3/FLEXIO0_D7/ADC0_A15/CMP2_IN2, label: 'P0_23/SJ9[1]/SW2[3]/SW2[4]', identifier: SW2}
- {pin_num: D7, pin_signal: PIO0_31/CT_INP3/ADC0_B23, label: 'P0_31/J1[16]'}
- {pin_num: E7, pin_signal: PIO0_30/FC1_P6/FC0_P6/CT_INP2/ADC0_B22, label: 'P0_30/SJ2[1]'}
- {pin_num: G7, pin_signal: VDD0, label: VDD_P0/1}
- {pin_num: L7, pin_signal: VDD_P20, label: VDD_P2}
- {pin_num: N7, pin_signal: PIO4_6/TRIG_OUT4/FC2_P6/CT_INP18/PLU_CLK, label: 'P4_6/J8[5]'}
- {pin_num: P7, pin_signal: VSS_P42, label: GND}
- {pin_num: T7, pin_signal: PIO4_13/TRIG_IN8/FC2_P1/USB1_ID/CT4_MAT1/FLEXIO0_D21/PLU_OUT1/SINC0_MBIT0/CAN0_TXD/OPAMP0_INP1/ADC0_B5/ADC1_B5, label: 'P4_13/SJ10[1]/SJ2[3]/J8[18]'}
- {pin_num: A8, pin_signal: PIO0_21/FC0_P5/FC1_P1/CT_INP1/FLEXIO0_D5/I3C0_SCL/TSI0_CH16/ADC0_A13, label: 'P0_21/SJ25[3]'}
- {pin_num: B8, pin_signal: PIO0_22/EWM0_IN/FC0_P6/FC1_P2/CT_INP2/FLEXIO0_D6/I3C0_PUR/ADC0_A14/CMP1_IN2, label: 'P0_22/J4[8]/SJ18[3]'}
- {pin_num: C8, pin_signal: PIO0_20/WUU0_IN4/FC0_P4/FC1_P0/CT_INP0/FLEXIO0_D4/I3C0_SDA/TSI0_CH15/ADC0_A12, label: 'P0_20/SJ24[3]/J7[2]'}
- {pin_num: E8, pin_signal: PIO0_28/FC1_P4/FC0_P4/CT_INP0/ADC0_B20, label: 'P0_28/J2[2]'}
- {pin_num: F8, pin_signal: PIO0_29/FC1_P5/FC0_P5/CT_INP1/ADC0_B21, label: 'P0_29/J1[6]'}
- {pin_num: H8, pin_signal: VDD2, label: VDD_P0/1}
- {pin_num: H13, pin_signal: VSS10, label: GND}
- {pin_num: K8, pin_signal: VDD_P21, label: VDD_P2}
- {pin_num: M8, pin_signal: PIO4_5/FC2_P5/CT_INP15/PLU_IN5/SINC0_MBIT4, label: 'P4_5/SJ11[3]/J8[6]'}
- {pin_num: N8, pin_signal: PIO4_14/CT4_MAT2/FLEXIO0_D22/PLU_OUT2, label: 'P4_14/J8[19]'}
- {pin_num: R8, pin_signal: PIO4_16/FC2_P2/USB1_OTG_PWR/CT3_MAT0/FLEXIO0_D24/PLU_OUT4/SINC0_MCLK1/CAN1_TXD/OPAMP1_INP0/ADC0_A6, label: 'P4_16/SJ23[1]/J8[21]'}
- {pin_num: T8, pin_signal: PIO4_15/WUU0_IN21/TRIG_OUT4/USB1_VBUS_DIG/CT4_MAT3/FLEXIO0_D23/PLU_OUT3/SINC0_MCLK_OUT0/CAN1_RXD/OPAMP0_OUT/ADC0_A1/CMP0_IN4P, label: 'P4_15/J8[20]'}
- {pin_num: U8, pin_signal: OPAMP1_INN, label: 'OPAMP1_INN/RSHUNT_CURB_N/SJ22[1]'}
- {pin_num: C9, pin_signal: PIO0_19/WUU0_IN3/EWM0_OUT_b/FC0_P3/CT0_MAT3/FLEXIO0_D3/HSCMP1_OUT/TSI0_CH14/ADC0_A11, label: 'P0_19/J2[13]/J7[1]'}
- {pin_num: D6, pin_signal: VSS5, label: GND}
- {pin_num: E13, pin_signal: VSS8, label: GND}
- {pin_num: J14, pin_signal: VSS13, label: GND}
- {pin_num: P9, pin_signal: VSS_P40, label: GND}
- {pin_num: R9, pin_signal: PIO4_17/TRIG_IN9/FC2_P3/USB1_OTG_OC/CT3_MAT1/FLEXIO0_D25/PLU_OUT5/SINC0_MBIT1/OPAMP1_INP1/ADC0_B6, label: 'P4_17/J8[22]'}
- {pin_num: A10, pin_signal: PIO0_17/FC0_P1/CT0_MAT1/UTICK_CAP3/FLEXIO0_D1/PDM0_DATA0/I3C0_SCL/TSI0_CH12/ADC0_A9, label: 'P0_17/J7[7]'}
- {pin_num: B10, pin_signal: PIO0_16/WUU0_IN2/FC0_P0/CT0_MAT0/UTICK_CAP2/FLEXIO0_D0/PDM0_CLK/I3C0_SDA/TSI0_CH11/ADC0_A8, label: 'P0_16/J7[3]'}
- {pin_num: C10, pin_signal: PIO0_18/EWM0_IN/FC0_P2/CT0_MAT2/FLEXIO0_D2/HSCMP0_OUT/PDM0_DATA1/TSI0_CH13/ADC0_A10, label: 'P0_18/SJ23[3]/J7[5]'}
- {pin_num: E10, pin_signal: PIO0_27/FC1_P3/CT0_MAT3/ADC0_B19, label: 'P0_27/SJ6[1]', identifier: LED_GREEN}
- {pin_num: F10, pin_signal: PIO0_26/FC1_P2/CT0_MAT2/ADC0_B18, label: 'P0_26/J2[10]'}
- {pin_num: H10, pin_signal: VDD_P31, label: VDD_P3}
- {pin_num: J8, pin_signal: VSS11, label: GND}
- {pin_num: K10, pin_signal: VDD_CORE/VOUT_CORE, label: 'VDD_CORE/L2[2]'}
- {pin_num: M10, pin_signal: PIO5_2/VBAT_WAKEUP_b/SPC_LPREQ/TAMPER0/ADC1_B10, label: 'P5_2/SJ19[1]'}
- {pin_num: N10, pin_signal: PIO4_18/CT3_MAT2/FLEXIO0_D26/PLU_OUT6, label: 'P4_18/J8[23]'}
- {pin_num: R10, pin_signal: PIO4_19/TRIG_OUT5/CT3_MAT3/FLEXIO0_D27/PLU_OUT7/SINC0_MCLK_OUT1/OPAMP1_OUT/ADC0_B1/CMP1_IN4P, label: 'P4_19/J8[24]'}
- {pin_num: T10, pin_signal: PIO4_20/TRIG_IN8/FC2_P4/CT2_MAT0/FLEXIO0_D28/SINC0_MCLK2/OPAMP2_INP0/ADC1_A6, label: 'P4_20/SJ21[1]/J8[25]'}
- {pin_num: U10, pin_signal: OPAMP2_INN, label: 'OPAMP2_INN/RSHUNT_CURC_N/SJ20[1]'}
- {pin_num: B11, pin_signal: PIO0_11/CT0_MAT1/FLEXIO0_D3/HSCMP2_OUT/ADC0_B11, label: 'P0_11/J9[18]'}
- {pin_num: D11, pin_signal: PIO0_12/FC1_P4/FC0_P0/CT0_MAT2/FLEXIO0_D4/ADC0_B12, label: 'P0_12/J8[9]'}
- {pin_num: E11, pin_signal: PIO0_14/FC1_P6/FC0_P2/CT_INP2/UTICK_CAP0/FLEXIO0_D6/ADC0_B14, label: 'P0_14/J4[6]/SJ19[3]'}
- {pin_num: G11, pin_signal: VDD_P30, label: VDD_P3}
- {pin_num: L11, pin_signal: VDD_CORE, label: 'VDD_CORE/L2[2]'}
- {pin_num: N11, pin_signal: PIO5_3/TRIG_IN11/RTC_CLKOUT/TAMPER1/ADC1_B11, label: 'P5_3/SJ18[1]'}
- {pin_num: P11, pin_signal: USB1_ID, label: 'HS_USB_ID/Q1[2]'}
- {pin_num: T11, pin_signal: PIO4_21/TRIG_IN9/FC2_P5/CT2_MAT1/FLEXIO0_D29/SINC0_MBIT2/OPAMP2_INP1/ADC1_B6, label: 'P4_21/J8[26]'}
- {pin_num: A12, pin_signal: PIO0_9/FC0_P5/CT_INP1/FLEXIO0_D1/ADC0_B9, label: 'P0_9/J8[10]'}
- {pin_num: B12, pin_signal: PIO0_10/FC0_P6/CT0_MAT0/FLEXIO0_D2/ADC0_B10, label: 'P0_10/SJ5[1]', identifier: LED_RED}
- {pin_num: C12, pin_signal: PIO0_8/FC0_P4/CT_INP0/FLEXIO0_D0/ADC0_B8, label: 'P0_8/J8[11]'}
- {pin_num: D9, pin_signal: VSS6, label: GND}
- {pin_num: F12, pin_signal: PIO0_13/FC1_P5/FC0_P1/CT0_MAT3/FLEXIO0_D5/ADC0_B13, label: 'P0_13/J8[12]'}
- {pin_num: H12, pin_signal: VDD_P42, label: VDD_P3}
- {pin_num: K12, pin_signal: PIO5_5/TRIG_IN10/LPTMR0_ALT2/TAMPER3/ADC1_B13, label: 'P5_5/SJ17[3]'}
- {pin_num: M12, pin_signal: PIO5_4/TRIG_OUT7/SPC_LPREQ/TAMPER2/ADC1_B12, label: 'P5_4/J2[7]'}
- {pin_num: P14, pin_signal: VDD3, label: GND}
- {pin_num: R12, pin_signal: VDD_USB, label: VDD_USB}
- {pin_num: T12, pin_signal: PIO4_22/CT2_MAT2/FLEXIO0_D30, label: 'P4_22/J8[27]'}
- {pin_num: U12, pin_signal: PIO4_23/TRIG_OUT5/FC2_P6/CT2_MAT3/FLEXIO0_D31/SINC0_MCLK_OUT2/OPAMP2_OUT/ADC0_A2/ADC0_B2/ADC1_B3/CMP2_IN4P, label: 'P4_23/J8[28]'}
- {pin_num: C13, pin_signal: PIO0_7/WUU0_IN1/FC0_P3/CT_INP3/CMP2_IN1, label: 'P0_7/J8[8]'}
- {pin_num: D12, pin_signal: VSS7, label: GND}
- {pin_num: G13, pin_signal: PIO0_15/FC0_P3/CT_INP3/UTICK_CAP1/FLEXIO0_D7/ADC0_B15, label: 'P0_15/SJ8[1]'}
- {pin_num: H9, pin_signal: VSS9, label: GND}
- {pin_num: K13, pin_signal: PIO5_6/TRIG_OUT6/LPTMR1_ALT2/TAMPER4/ADC1_B14, label: 'P5_6/SJ13[1]'}
- {pin_num: L13, pin_signal: PIO5_7/TRIG_IN11/TAMPER5/ADC1_B15, label: 'P5_7/J5[2]'}
- {pin_num: R13, pin_signal: USB1_DP, label: 'MCX_USB1_DP/L13[3]'}
- {pin_num: A14, pin_signal: PIO0_5/EWM0_OUT_b/FC0_P1/FC1_P5/CT0_MAT3/UTICK_CAP3/PDM0_DATA0/TSI0_CH9, label: 'P0_5/SJ13[3]/J9[15]/SJ21[3]'}
- {pin_num: B14, pin_signal: PIO0_4/WUU0_IN0/EWM0_IN/FC0_P0/FC1_P4/CT0_MAT2/UTICK_CAP2/HSCMP1_OUT/PDM0_CLK/TSI0_CH8, label: 'P0_4/SJ12[3]/J9[17]/SJ22[3]'}
- {pin_num: C14, pin_signal: PIO0_6/ISPMODE_N/FC0_P2/FC1_P6/CT_INP2/HSCMP2_OUT/PDM0_DATA1/CLKOUT/TSI0_CH10, label: 'P0_6/J23[7]/SW3[3]/SW3[4]', identifier: SW3}
- {pin_num: D14, pin_signal: PIO3_7/FC6_P6/FC7_P1/CT4_MAT3/PWM0_B1/FLEXIO0_D15/FLEXSPI0_A_SCLK/SIM0_VCCEN/SAI0_MCLK, label: 'P3_7/TP18/U8[6]/U7[B2]'}
- {pin_num: E14, pin_signal: PIO3_8/WUU0_IN23/FC6_P4/FC7_P0/CT_INP4/PWM0_A2/FLEXIO0_D16/FLEXSPI0_A_DATA0/SIM0_PD/SAI0_TX_BCLK, label: 'P3_8/TP16/U8[5]/U7[D3]'}
- {pin_num: F14, pin_signal: PIO3_4/FC7_P2/CT_INP18/PWM0_X2/FLEXIO0_D12/SIM1_CLK, label: 'P3_4/J9[12]'}
- {pin_num: G14, pin_signal: PIO3_5/FC7_P3/CT_INP19/PWM0_X3/FLEXIO0_D13/SIM1_IO, label: 'P3_5/J9[11]'}
- {pin_num: J10, pin_signal: VSS12, label: GND}
- {pin_num: L14, pin_signal: PIO5_8/TRIG_OUT7/TAMPER6/ADC1_B16, label: 'P5_8/U9[19]/J9[31]'}
- {pin_num: M14, pin_signal: PIO5_9/TAMPER7/ADC1_B17, label: 'P5_9/J9[29]'}
- {pin_num: N14, pin_signal: VDD_SYS, label: VDD_SYS}
- {pin_num: T16, pin_signal: VDD4, label: GND}
- {pin_num: R14, pin_signal: USB1_DM, label: 'MCX_USB1_DM/L13[2]'}
- {pin_num: T14, pin_signal: USB0_DM/WUU0_IN28, label: TP2}
- {pin_num: U14, pin_signal: USB1_VBUS, label: MCX_USB1_VBUS}
- {pin_num: B15, pin_signal: PIO0_3/TDI/FC1_P3/CT0_MAT1/UTICK_CAP1/HSCMP0_OUT/CMP1_IN1, label: 'P0_3/J23[8]/D16[3]/SJ17[1]'}
- {pin_num: C15, pin_signal: PIO3_1/TRIG_IN1/FC6_P0/FC7_P6/CT_INP17/PWM0_B0/FLEXIO0_D9/FLEXSPI0_A_SS1_b/FREQME_CLK_OUT0, label: P3_1/TP31}
- {pin_num: D15, pin_signal: PIO3_2/FC7_P0/CT4_MAT0/PWM0_X0/FLEXIO0_D10/SIM1_PD, label: 'P3_2/J9[20]/J7[8]'}
- {pin_num: F15, pin_signal: PIO3_9/FC6_P5/FC7_P2/CT_INP5/PWM0_B2/FLEXIO0_D17/FLEXSPI0_A_DATA1/SIM0_RST/SAI0_TX_FS, label: 'P3_9/TP15/U8[2]/U7[D2]'}
- {pin_num: H15, pin_signal: PIO3_15/FC8_P1/CT_INP7/PWM1_B1/FLEXIO0_D23/FLEXSPI0_A_DATA7/SAI0_RX_FS, label: 'P3_15/TP9/U7[E1]'}
- {pin_num: J15, pin_signal: PIO3_16/FC8_P2/CT_INP8/PWM1_A2/FLEXIO0_D24/SIM0_CLK/SAI1_TX_BCLK, label: 'P3_16/SJ11[1]'}
- {pin_num: K15, pin_signal: PIO3_17/WUU0_IN26/FC8_P3/CT_INP9/PWM1_B2/FLEXIO0_D25/SIM0_IO/SAI1_TX_FS, label: 'P3_17/J1[11]/SJ10[3]'}
- {pin_num: M15, pin_signal: PIO3_23/FC6_P3/CT_INP11/PWM1_X3/FLEXIO0_D31/SAI1_TXD1, label: 'P3_23/J6[3]'}
- {pin_num: P15, pin_signal: VDD_LDO_SYS/VOUT_SYS, label: VDD_LDO_SYS_IN}
- {pin_num: R15, pin_signal: VDD_DCDC, label: VDD_DCDC}
- {pin_num: T15, pin_signal: USB0_DP/WUU0_IN29, label: TP3}
- {pin_num: A16, pin_signal: PIO0_1/TCLK/SWCLK/FC1_P1/CT_INP1, label: 'P0_1/SWCLK/J23[4]/D16[5]/J22[2]', identifier: DEBUG_SWD_SWDCLK}
- {pin_num: B16, pin_signal: PIO0_2/TDO/SWO/FC1_P2/CT0_MAT0/UTICK_CAP0/I3C0_PUR, label: 'P0_2/SWO/J23[6]/D16[4]', identifier: DEBUG_SWD_SWO}
- {pin_num: D16, pin_signal: PIO3_3/FC7_P1/CT4_MAT1/PWM0_X1/FLEXIO0_D11/SIM1_RST, label: 'P3_3/J9[19]/SJ12[1]'}
- {pin_num: F16, pin_signal: PIO3_11/WUU0_IN24/FC6_P3/FC7_P5/CT1_MAT1/PWM0_B3/FLEXIO0_D19/FLEXSPI0_A_DATA3/SIM0_IO/SAI0_RXD0, label: 'P3_11/TP14/U8[7]/U7[D4]'}
- {pin_num: G16, pin_signal: PIO3_12/FC7_P4/FC6_P4/CT1_MAT2/PWM1_A0/FLEXIO0_D20/FLEXSPI0_A_DATA4/SAI0_RXD1, label: 'P3_12/TP17/U7[D5]'}
- {pin_num: H16, pin_signal: PIO3_13/FC7_P5/FC6_P5/CT1_MAT3/PWM1_B0/FLEXIO0_D21/FLEXSPI0_A_DATA5/SAI0_TXD1, label: 'P3_13/TP11/U7[E3]'}
- {pin_num: K16, pin_signal: PIO3_18/FC6_P6/CT2_MAT0/PWM1_X0/FLEXIO0_D26/SAI1_RX_BCLK, label: 'P3_18/J1[9]'}
- {pin_num: L16, pin_signal: PIO3_21/TRIG_OUT1/FC8_P5/FC6_P1/CT2_MAT3/PWM1_B3/FLEXIO0_D29/SIM0_RST/SAI1_RXD0, label: 'P3_21/J6[4]/J1[15]'}
- {pin_num: M16, pin_signal: PIO3_22/FC8_P6/FC6_P2/CT_INP10/PWM1_X2/FLEXIO0_D30/SIM0_VCCEN/SAI1_RXD1, label: 'P3_22/J6[5]'}
- {pin_num: P16, pin_signal: VSS_DCDC, label: GND}
- {pin_num: U16, pin_signal: PIO5_0/TRIG_IN10/LPTMR0_ALT2/EXTAL32K/ADC1_B8, label: 'P5_0/EXTAL32K/Y2[2]'}
- {pin_num: A17, pin_signal: PIO0_0/TMS/SWDIO/FC1_P0/CT_INP0, label: 'P0_0/SWDIO/J23[2]/D16[6]', identifier: DEBUG_SWD_SWDIO}
- {pin_num: B17, pin_signal: PIO3_0/WUU0_IN22/TRIG_IN0/FC7_P3/CT_INP16/PWM0_A0/FLEXIO0_D8/FLEXSPI0_A_SS0_b, label: 'P3_0/TP12/U8[1]/U7[C2]/U7[A3]'}
- {pin_num: D17, pin_signal: PIO3_6/CLKOUT/FC6_P1/CT4_MAT2/PWM0_A1/FLEXIO0_D14/FLEXSPI0_A_DQS/SIM1_VCCEN/SAI1_MCLK/FREQME_CLK_OUT1, label: 'P3_6/TP8/U7[C3]'}
- {pin_num: F17, pin_signal: PIO3_10/FC6_P2/FC7_P4/CT1_MAT0/PWM0_A3/FLEXIO0_D18/FLEXSPI0_A_DATA2/SIM0_CLK/SAI0_TXD0, label: 'P3_10/TP13/U8[3]/U7[C4]'}
- {pin_num: H17, pin_signal: PIO3_14/WUU0_IN25/FC8_P0/CT_INP6/PWM1_A1/FLEXIO0_D22/FLEXSPI0_A_DATA6/SAI0_RX_BCLK, label: 'P3_14/TP10/U7[E2]'}
- {pin_num: K17, pin_signal: PIO3_19/FC7_P6/CT2_MAT1/PWM1_X1/FLEXIO0_D27/SAI1_RX_FS, label: 'P3_19/J5[1]/J1[13]'}
- {pin_num: M17, pin_signal: PIO3_20/WUU0_IN27/TRIG_OUT0/FC8_P4/FC6_P0/CT2_MAT2/PWM1_A3/FLEXIO0_D28/SIM0_PD/SAI1_TXD0, label: 'P3_20/J6[6]/J1[5]'}
- {pin_num: P17, pin_signal: DCDC_LX, label: DCDC_LX}
- {pin_num: T17, pin_signal: VDD_BAT, label: 'VDD_BAT/J27[2]'}
- {pin_num: U17, pin_signal: PIO5_1/TRIG_OUT6/LPTMR1_ALT2/XTAL32K/ADC1_B9, label: 'P5_1/XTAL32K/Y2[1]'}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
#include "fsl_common.h"
#include "fsl_port.h"
#include "fsl_gpio.h"
#include "pin_mux.h"
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitBootPins
* Description : Calls initialization functions.
*
* END ****************************************************************************************************************/
void BOARD_InitBootPins(void)
{
BOARD_InitDEBUG_UARTPins();
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitDEBUG_UARTPins:
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
- pin_list:
- {pin_num: A1, peripheral: LP_FLEXCOMM4, signal: LPFLEXCOMM_P0, pin_signal: PIO1_8/WUU0_IN10/LPTMR1_ALT3/TRACE_DATA0/FC4_P0/FC5_P4/CT_INP8/SCT0_OUT2/FLEXIO0_D16/PLU_OUT0/ENET0_TXD2/I3C1_SDA/TSI0_CH17/ADC1_A8,
slew_rate: fast, open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, passive_filter: disable, pull_value: low, input_buffer: enable,
invert_input: normal}
- {pin_num: B1, peripheral: LP_FLEXCOMM4, signal: LPFLEXCOMM_P1, pin_signal: PIO1_9/TRACE_DATA1/FC4_P1/FC5_P5/CT_INP9/SCT0_OUT3/FLEXIO0_D17/PLU_OUT1/ENET0_TXD3/I3C1_SCL/TSI0_CH18/ADC1_A9,
slew_rate: fast, open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, passive_filter: disable, input_buffer: enable, invert_input: normal}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitDEBUG_UARTPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
void BOARD_InitDEBUG_UARTPins(void)
{
/* Enables the clock for PORT1: Enables clock */
CLOCK_EnableClock(kCLOCK_Port1);
const port_pin_config_t DEBUG_UART_RX = {/* Internal pull-up/down resistor is disabled */
kPORT_PullDisable,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* Low drive strength is configured */
kPORT_LowDriveStrength,
/* Pin is configured as FC4_P0 */
kPORT_MuxAlt2,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT1_8 (pin A1) is configured as FC4_P0 */
PORT_SetPinConfig(BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, &DEBUG_UART_RX);
const port_pin_config_t DEBUG_UART_TX = {/* Internal pull-up/down resistor is disabled */
kPORT_PullDisable,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* Low drive strength is configured */
kPORT_LowDriveStrength,
/* Pin is configured as FC4_P1 */
kPORT_MuxAlt2,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT1_9 (pin B1) is configured as FC4_P1 */
PORT_SetPinConfig(BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, &DEBUG_UART_TX);
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitSWD_DEBUGPins:
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
- pin_list:
- {pin_num: A16, peripheral: SWD, signal: SWCLK, pin_signal: PIO0_1/TCLK/SWCLK/FC1_P1/CT_INP1, slew_rate: fast, open_drain: disable, drive_strength: low, pull_select: down,
pull_enable: enable, input_buffer: enable, invert_input: normal}
- {pin_num: A17, peripheral: SWD, signal: SWDIO, pin_signal: PIO0_0/TMS/SWDIO/FC1_P0/CT_INP0, slew_rate: fast, open_drain: disable, drive_strength: high, pull_select: up,
pull_enable: enable, input_buffer: enable, invert_input: normal}
- {pin_num: B16, peripheral: SWD, signal: SWO, pin_signal: PIO0_2/TDO/SWO/FC1_P2/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, drive_strength: high,
pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitSWD_DEBUGPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
void BOARD_InitSWD_DEBUGPins(void)
{
/* Enables the clock for PORT0 controller: Enables clock */
CLOCK_EnableClock(kCLOCK_Port0);
const port_pin_config_t DEBUG_SWD_SWDIO = {/* Internal pull-up resistor is enabled */
kPORT_PullUp,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* High drive strength is configured */
kPORT_HighDriveStrength,
/* Pin is configured as SWDIO */
kPORT_MuxAlt1,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT0_0 (pin A17) is configured as SWDIO */
PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, &DEBUG_SWD_SWDIO);
const port_pin_config_t DEBUG_SWD_SWDCLK = {/* Internal pull-down resistor is enabled */
kPORT_PullDown,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* Low drive strength is configured */
kPORT_LowDriveStrength,
/* Pin is configured as SWCLK */
kPORT_MuxAlt1,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT0_1 (pin A16) is configured as SWCLK */
PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, &DEBUG_SWD_SWDCLK);
const port_pin_config_t DEBUG_SWD_SWO = {/* Internal pull-up/down resistor is disabled */
kPORT_PullDisable,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* High drive strength is configured */
kPORT_HighDriveStrength,
/* Pin is configured as SWO */
kPORT_MuxAlt1,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT0_2 (pin B16) is configured as SWO */
PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWO_PIN, &DEBUG_SWD_SWO);
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitLEDsPins:
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
- pin_list:
- {pin_num: C4, peripheral: GPIO1, signal: 'GPIO, 2', pin_signal: PIO1_2/TRIG_OUT0/FC3_P2/FC4_P6/CT1_MAT0/SCT0_IN6/FLEXIO0_D10/ENET0_MDC/SAI1_TXD0/CAN0_TXD/TSI0_CH2/ADC0_A18/CMP2_IN0,
direction: OUTPUT, slew_rate: fast, open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal}
- {pin_num: B12, peripheral: GPIO0, signal: 'GPIO, 10', pin_signal: PIO0_10/FC0_P6/CT0_MAT0/FLEXIO0_D2/ADC0_B10, direction: OUTPUT, slew_rate: fast, open_drain: disable,
drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal}
- {pin_num: E10, peripheral: GPIO0, signal: 'GPIO, 27', pin_signal: PIO0_27/FC1_P3/CT0_MAT3/ADC0_B19, direction: OUTPUT, slew_rate: fast, open_drain: disable, drive_strength: low,
pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitLEDsPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
void BOARD_InitLEDsPins(void)
{
/* Enables the clock for GPIO0: Enables clock */
CLOCK_EnableClock(kCLOCK_Gpio0);
/* Enables the clock for GPIO1: Enables clock */
CLOCK_EnableClock(kCLOCK_Gpio1);
/* Enables the clock for PORT0 controller: Enables clock */
CLOCK_EnableClock(kCLOCK_Port0);
/* Enables the clock for PORT1: Enables clock */
CLOCK_EnableClock(kCLOCK_Port1);
gpio_pin_config_t LED_RED_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_10 (pin B12) */
GPIO_PinInit(BOARD_INITLEDSPINS_LED_RED_GPIO, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED_config);
gpio_pin_config_t LED_GREEN_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_27 (pin E10) */
GPIO_PinInit(BOARD_INITLEDSPINS_LED_GREEN_GPIO, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN_config);
gpio_pin_config_t LED_BLUE_config = {
.pinDirection = kGPIO_DigitalOutput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO1_2 (pin C4) */
GPIO_PinInit(BOARD_INITLEDSPINS_LED_BLUE_GPIO, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE_config);
const port_pin_config_t LED_RED = {/* Internal pull-up/down resistor is disabled */
kPORT_PullDisable,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* Low drive strength is configured */
kPORT_LowDriveStrength,
/* Pin is configured as PIO0_10 */
kPORT_MuxAlt0,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT0_10 (pin B12) is configured as PIO0_10 */
PORT_SetPinConfig(BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED);
const port_pin_config_t LED_GREEN = {/* Internal pull-up/down resistor is disabled */
kPORT_PullDisable,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* Low drive strength is configured */
kPORT_LowDriveStrength,
/* Pin is configured as PIO0_27 */
kPORT_MuxAlt0,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT0_27 (pin E10) is configured as PIO0_27 */
PORT_SetPinConfig(BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN);
const port_pin_config_t LED_BLUE = {/* Internal pull-up/down resistor is disabled */
kPORT_PullDisable,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* Low drive strength is configured */
kPORT_LowDriveStrength,
/* Pin is configured as PIO1_2 */
kPORT_MuxAlt0,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT1_2 (pin C4) is configured as PIO1_2 */
PORT_SetPinConfig(BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE);
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitBUTTONsPins:
- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'}
- pin_list:
- {pin_num: C14, peripheral: GPIO0, signal: 'GPIO, 6', pin_signal: PIO0_6/ISPMODE_N/FC0_P2/FC1_P6/CT_INP2/HSCMP2_OUT/PDM0_DATA1/CLKOUT/TSI0_CH10, direction: INPUT,
slew_rate: fast, open_drain: disable, drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal}
- {pin_num: B7, peripheral: GPIO0, signal: 'GPIO, 23', pin_signal: PIO0_23/WUU0_IN5/EWM0_OUT_b/FC1_P3/CT_INP3/FLEXIO0_D7/ADC0_A15/CMP2_IN2, direction: INPUT, slew_rate: fast,
open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitBUTTONsPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
void BOARD_InitBUTTONsPins(void)
{
/* Enables the clock for GPIO0: Enables clock */
CLOCK_EnableClock(kCLOCK_Gpio0);
/* Enables the clock for PORT0 controller: Enables clock */
CLOCK_EnableClock(kCLOCK_Port0);
gpio_pin_config_t SW3_config = {
.pinDirection = kGPIO_DigitalInput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_6 (pin C14) */
GPIO_PinInit(BOARD_INITBUTTONSPINS_SW3_GPIO, BOARD_INITBUTTONSPINS_SW3_PIN, &SW3_config);
gpio_pin_config_t SW2_config = {
.pinDirection = kGPIO_DigitalInput,
.outputLogic = 0U
};
/* Initialize GPIO functionality on pin PIO0_23 (pin B7) */
GPIO_PinInit(BOARD_INITBUTTONSPINS_SW2_GPIO, BOARD_INITBUTTONSPINS_SW2_PIN, &SW2_config);
const port_pin_config_t SW2 = {/* Internal pull-up/down resistor is disabled */
kPORT_PullDisable,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* Low drive strength is configured */
kPORT_LowDriveStrength,
/* Pin is configured as PIO0_23 */
kPORT_MuxAlt0,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT0_23 (pin B7) is configured as PIO0_23 */
PORT_SetPinConfig(BOARD_INITBUTTONSPINS_SW2_PORT, BOARD_INITBUTTONSPINS_SW2_PIN, &SW2);
const port_pin_config_t SW3 = {/* Internal pull-up resistor is enabled */
kPORT_PullUp,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* Low drive strength is configured */
kPORT_LowDriveStrength,
/* Pin is configured as PIO0_6 */
kPORT_MuxAlt0,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT0_6 (pin C14) is configured as PIO0_6 */
PORT_SetPinConfig(BOARD_INITBUTTONSPINS_SW3_PORT, BOARD_INITBUTTONSPINS_SW3_PIN, &SW3);
}
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/