mongoose/examples/stm32/nucleo-f746zg-keil-freertos-tcp/phyHandling.h

/*
 * FreeRTOS+TCP V3.1.0
 * Copyright (C) 2022 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * SPDX-License-Identifier: MIT
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * http://aws.amazon.com/freertos
 * http://www.FreeRTOS.org
 */

/**
 * @brief
 * Handling of Ethernet PHY's
 * PHY's communicate with an EMAC either through
 * a Media-Independent Interface (MII), or a Reduced Media-Independent Interface (RMII).
 * The EMAC can poll for PHY ports on 32 different addresses. Each of the PHY ports
 * shall be treated independently.
 *
 */

#ifndef PHYHANDLING_H

    #define PHYHANDLING_H

    #ifdef __cplusplus
        extern "C" {
    #endif


    #ifndef ipconfigPHY_MAX_PORTS
        /* There can be at most 32 PHY ports, but in most cases there are 4 or less. */
        #define ipconfigPHY_MAX_PORTS    4
    #endif

/* A generic user-provided function that reads from the PHY-port at 'xAddress'( 0-based ). A 16-bit value shall be stored in
 * '*pulValue'. xRegister is the register number ( 0 .. 31 ). In fact all PHY registers are 16-bit.
 * Return non-zero in case the action failed. */
    typedef BaseType_t ( * xApplicationPhyReadHook_t )( BaseType_t xAddress,
                                                        BaseType_t xRegister,
                                                        uint32_t * pulValue );

/* A generic user-provided function that writes 'ulValue' to the
 * PHY-port at 'xAddress' ( 0-based ). xRegister is the register number ( 0 .. 31 ).
 * Return non-zero in case the action failed. */
    typedef BaseType_t ( * xApplicationPhyWriteHook_t )( BaseType_t xAddress,
                                                         BaseType_t xRegister,
                                                         uint32_t ulValue );

    typedef struct xPhyProperties
    {
        uint8_t ucSpeed;
        uint8_t ucMDI_X; /* MDI-X : Medium Dependent Interface - Crossover */
        uint8_t ucDuplex;
        uint8_t ucSpare;
    } PhyProperties_t;

    typedef struct xEthernetPhy
    {
        xApplicationPhyReadHook_t fnPhyRead;
        xApplicationPhyWriteHook_t fnPhyWrite;
        uint32_t ulPhyIDs[ ipconfigPHY_MAX_PORTS ];
        uint8_t ucPhyIndexes[ ipconfigPHY_MAX_PORTS ];
        TimeOut_t xLinkStatusTimer;
        TickType_t xLinkStatusRemaining;
        BaseType_t xPortCount;
        uint32_t ulBCRValue;
        uint32_t ulACRValue;
        uint32_t ulLinkStatusMask;
        PhyProperties_t xPhyPreferences;
        PhyProperties_t xPhyProperties;
    } EthernetPhy_t;

/* Some defines used internally here to indicate preferences about speed, MDIX
 * (wired direct or crossed), and duplex (half or full). */

/* Values for PhyProperties_t::ucSpeed : */
    #define PHY_SPEED_10           1
    #define PHY_SPEED_100          2
    #define PHY_SPEED_AUTO         3

/* Values for PhyProperties_t::ucMDI_X : */
    #define PHY_MDIX_DIRECT        1
    #define PHY_MDIX_CROSSED       2
    #define PHY_MDIX_AUTO          3

/* Values for PhyProperties_t::ucDuplex : */
    #define PHY_DUPLEX_HALF        1
    #define PHY_DUPLEX_FULL        2
    #define PHY_DUPLEX_AUTO        3

/* ID's of supported PHY's : */
    #define PHY_ID_LAN8742A        0x0007c130
    #define PHY_ID_LAN8720         0x0007c0f0

    #define PHY_ID_KSZ8041         0x000010A1
    #define PHY_ID_KSZ8051         0x000010A1
    #define PHY_ID_KSZ8081         0x000010A1

    #define PHY_ID_KSZ8863         0x00221430
    #define PHY_ID_KSZ8795         0x00221550
    #define PHY_ID_KSZ8081MNXIA    0x00221560

    #define PHY_ID_DP83848I        0x20005C90
    #define PHY_ID_DP83TC811S      0x2000A250

    #define PHY_ID_TM4C129X        0x2000A221

    #define PHY_ID_MV88E6071       0xFF000710

/* Initialise the struct and assign a PHY-read and -write function. */
    void vPhyInitialise( EthernetPhy_t * pxPhyObject,
                         xApplicationPhyReadHook_t fnPhyRead,
                         xApplicationPhyWriteHook_t fnPhyWrite );

/* Discover all PHY's connected by polling 32 indexes ( zero-based ) */
    BaseType_t xPhyDiscover( EthernetPhy_t * pxPhyObject );

/* Send a reset command to the connected PHY ports and send configuration. */
    BaseType_t xPhyConfigure( EthernetPhy_t * pxPhyObject,
                              const PhyProperties_t * pxPhyProperties );

/* Give a command to start auto negotiation on a set of PHY port's. */
    BaseType_t xPhyStartAutoNegotiation( EthernetPhy_t * pxPhyObject,
                                         uint32_t ulPhyMask );

/* Do not use auto negotiation but use predefined values from 'pxPhyObject->xPhyPreferences'. */
    BaseType_t xPhyFixedValue( EthernetPhy_t * pxPhyObject,
                               uint32_t ulPhyMask );

/* Check the current Link Status.
 * 'xHadReception' : make this true if a packet has been received since the
 * last call to this function. */
    BaseType_t xPhyCheckLinkStatus( EthernetPhy_t * pxPhyObject,
                                    BaseType_t xHadReception );

/* Get the bitmask of a given 'EthernetPhy_t'. */
    #define xPhyGetMask( pxPhyObject ) \
    ( ( ( ( uint32_t ) 1u ) << ( pxPhyObject )->xPortCount ) - 1u )

    #ifdef __cplusplus
        } /* extern "C" */
    #endif

#endif /* ifndef PHYHANDLING_H */