2022-09-07 20:35:05 +08:00
|
|
|
#MIP TCP / IP stack over pcap
|
|
|
|
|
|
|
|
This example allows to use Mongoose's MIP built-in TCP/IP stack on systems
|
|
|
|
that support pcap API, i.e. have libpcap library installed. The application
|
|
|
|
opens an interface and uses `pcap_next_ex()` for reading packets from the
|
|
|
|
interface, and `pcap_inject()` to write packets to the interface.
|
|
|
|
|
|
|
|
NOTE: depending on the libcap implementation, the injected packets may
|
|
|
|
or may not be looped back to the interface's TCP/IP stack. If they are
|
|
|
|
not looped back, then it is necessary to create a separate interface that
|
|
|
|
is bridged to the target interface - see MacOS example below.
|
|
|
|
|
|
|
|
## MacOS setup
|
|
|
|
|
|
|
|
MacOS has support for `feth` (fake ethernet) interfaces. One can create a pair
|
|
|
|
of `feth` interfaces and interlink them. Once a `feth` interface is assigned
|
|
|
|
a peer and an IP address, anything that gets injected to it, appears on a
|
|
|
|
peer interface and vice versa.
|
|
|
|
|
|
|
|
```sh
|
|
|
|
$ sudo ifconfig feth0 create
|
|
|
|
$ sudo ifconfig feth1 create
|
|
|
|
$ sudo ifconfig feth1 peer feth 0 # Link two fake ethernet ifaces together
|
|
|
|
$ sudo ifconfig feth1 10.10 # Assign 10.0.0.10 to feth1
|
|
|
|
$ sudo ifconfig feth0 up
|
|
|
|
$ sudo ifconfig feth1 up
|
|
|
|
```
|
|
|
|
|
|
|
|
Now we have two Ethernet interfaces, `feth0` and `feth1`, interlinked and active.
|
|
|
|
On your Mac, go to "System Preferences" / Sharing, enable "Internet Sharing"
|
|
|
|
and choose "Thunderbolt bridge". This enables DHCP on the `bridge0` interface.
|
|
|
|
On my system it gets `192.168.2.1` IP address, and serves `192.168.2/24` net.
|
|
|
|
which is bridge for all Thunderbolt devices, and adds necessary routes to the
|
|
|
|
WiFi interface. We should add one of our fake interfaces to this bridge:
|
|
|
|
|
|
|
|
```sh
|
|
|
|
$ sudo ifconfig bridge0 addm feth1
|
|
|
|
```
|
|
|
|
|
|
|
|
We cat start an example using the `feth0`:
|
|
|
|
|
|
|
|
```sh
|
|
|
|
$ make -C examples/mip-pcap/ clean all ARGS="-i feth0"
|
|
|
|
...
|
|
|
|
2386718 3 mip.c:279:arp_cache_add ARP cache: added 0xc0a80201 @ 36:77:4d:be:e0:80
|
|
|
|
2386718 2 mip.c:300:onstatechange READY, IP: 192.168.2.17
|
|
|
|
```
|
2022-09-08 18:28:16 +08:00
|
|
|
|
|
|
|
The diagram of the setup is below:
|
|
|
|
|
|
|
|
```
|
|
|
|
┼
|
|
|
|
|
|
|
|
┌──────────► 192.168.2.1 bridge0
|
|
|
|
│ routing DHCP │
|
|
|
|
│ ┌──────────────────┴──────────────────┐
|
2022-09-08 18:36:01 +08:00
|
|
|
▼ │ │ 192.168.2.17
|
2022-09-08 18:28:16 +08:00
|
|
|
│ ┌─────────┐ fake ethernet pair ┌─────────┐
|
|
|
|
192.168.0.10 │ │ feth1 ├────────────┬───────┤ feth0 │
|
|
|
|
┌─────────┐ │ └─────────┘ │ └────┬────┘
|
|
|
|
│ en0 │ │ │ │
|
|
|
|
└────┬────┘ │ ┌─────────┐ ┌─────────┐ ┌─────────┐ │ │
|
|
|
|
│ │ │ en1 │ │ en2 │ │ en3 │ │ mip-pcap
|
|
|
|
│ └────┬────┘ └────┬────┘ └────┬────┘ │
|
|
|
|
WiFi │ │ │ │ │
|
|
|
|
└──────┼───────────┼───────────┼──────┘
|
|
|
|
│ │ │ │
|
|
|
|
▼
|
|
|
|
Internets Thunderbolt Ethernet
|
|
|
|
```
|