From 943a8a270802eb138a93a6535add31928ee08a77 Mon Sep 17 00:00:00 2001 From: "Sergio R. Caprile" Date: Mon, 26 Feb 2024 14:53:06 -0300 Subject: [PATCH 1/3] fix references to RM --- examples/nxp/rt1060-evk-make-baremetal-builtin/sysinit.c | 2 +- examples/nxp/rt1060-evk-make-freertos-builtin/sysinit.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/examples/nxp/rt1060-evk-make-baremetal-builtin/sysinit.c b/examples/nxp/rt1060-evk-make-baremetal-builtin/sysinit.c index 60f3fae7..cfac5dae 100644 --- a/examples/nxp/rt1060-evk-make-baremetal-builtin/sysinit.c +++ b/examples/nxp/rt1060-evk-make-baremetal-builtin/sysinit.c @@ -36,7 +36,7 @@ void SystemInit(void) { // Called automatically by startup code (ints masked) SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2)); // Enable FPU asm("DSB"); asm("ISB"); - // 53.4.2: Disable watchdog after reset (unlocked) + // 58.4.2: Disable watchdog after reset (unlocked) RTWDOG->CS &= ~RTWDOG_CS_EN_MASK; RTWDOG->TOVAL = 0xFFFF; while (RTWDOG->CS & RTWDOG_CS_ULK_MASK) spin(1); // wait for lock diff --git a/examples/nxp/rt1060-evk-make-freertos-builtin/sysinit.c b/examples/nxp/rt1060-evk-make-freertos-builtin/sysinit.c index 60f3fae7..cfac5dae 100644 --- a/examples/nxp/rt1060-evk-make-freertos-builtin/sysinit.c +++ b/examples/nxp/rt1060-evk-make-freertos-builtin/sysinit.c @@ -36,7 +36,7 @@ void SystemInit(void) { // Called automatically by startup code (ints masked) SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2)); // Enable FPU asm("DSB"); asm("ISB"); - // 53.4.2: Disable watchdog after reset (unlocked) + // 58.4.2: Disable watchdog after reset (unlocked) RTWDOG->CS &= ~RTWDOG_CS_EN_MASK; RTWDOG->TOVAL = 0xFFFF; while (RTWDOG->CS & RTWDOG_CS_ULK_MASK) spin(1); // wait for lock From 626f605835b218adebf41e423af53d777f5bd517 Mon Sep 17 00:00:00 2001 From: "Sergio R. Caprile" Date: Wed, 20 Mar 2024 10:34:27 -0300 Subject: [PATCH 2/3] Support RT11, fix RTL PHY, fix RA err cntr --- mongoose.c | 18 +++++++++++++----- src/drivers/imxrt.c | 11 ++++++++--- src/drivers/phy.c | 5 ++++- src/drivers/ra.c | 2 +- 4 files changed, 26 insertions(+), 10 deletions(-) diff --git a/mongoose.c b/mongoose.c index 25a9e0f6..0ffd4d68 100644 --- a/mongoose.c +++ b/mongoose.c @@ -14444,10 +14444,15 @@ struct imxrt_enet { }; #undef ENET +#if defined(MG_DRIVER_IMXRT_RT11) && MG_DRIVER_IMXRT_RT11 +#define ENET ((struct imxrt_enet *) (uintptr_t) 0x40424000U) +#define ETH_DESC_CNT 5 // Descriptors count +#else #define ENET ((struct imxrt_enet *) (uintptr_t) 0x402D8000U) +#define ETH_DESC_CNT 4 // Descriptors count +#endif #define ETH_PKT_SIZE 1536 // Max frame size, 64-bit aligned -#define ETH_DESC_CNT 4 // Descriptors count struct enet_desc { uint16_t length; // Data length @@ -14510,7 +14515,7 @@ static bool mg_tcpip_driver_imxrt_init(struct mg_tcpip_if *ifp) { int cr = (d == NULL || d->mdc_cr < 0) ? 24 : d->mdc_cr; ENET->MSCR = (1 << 8) | ((cr & 0x3f) << 1); // HOLDTIME 2 clks struct mg_phy phy = {enet_read_phy, enet_write_phy}; - mg_phy_init(&phy, d->phy_addr, MG_PHY_LEDS_ACTIVE_HIGH); // MAC clocks PHY + mg_phy_init(&phy, d->phy_addr, MG_PHY_LEDS_ACTIVE_HIGH); // MAC clocks PHY // Select RMII mode, 100M, keep CRC, set max rx length, disable loop ENET->RCR = (1518 << 16) | MG_BIT(8) | MG_BIT(2); // ENET->RCR |= MG_BIT(3); // Receive all @@ -14536,10 +14541,10 @@ static size_t mg_tcpip_driver_imxrt_tx(const void *buf, size_t len, struct mg_tcpip_if *ifp) { static int s_txno; // Current descriptor index if (len > sizeof(s_txbuf[ETH_DESC_CNT])) { - ifp->nerr++; MG_ERROR(("Frame too big, %ld", (long) len)); len = (size_t) -1; // fail } else if ((s_txdesc[s_txno].control & MG_BIT(15))) { + ifp->nerr++; MG_ERROR(("No descriptors available")); len = 0; // retry later } else { @@ -14669,9 +14674,12 @@ void mg_phy_init(struct mg_phy *phy, uint8_t phy_addr, uint8_t config) { } else if (id1 == MG_PHY_LAN87x) { // nothing to do } else if (id1 == MG_PHY_RTL8201) { + // assume PHY has been hardware strapped properly +#if 0 phy->write_reg(phy_addr, MG_PHY_RTL8201_REG_PAGESEL, 7); // Select page 7 - phy->write_reg(phy_addr, MG_PHY_RTL8201_REG_RMSR, 0x7ffb); + phy->write_reg(phy_addr, MG_PHY_RTL8201_REG_RMSR, 0x1ffa); phy->write_reg(phy_addr, MG_PHY_RTL8201_REG_PAGESEL, 0); // Select page 0 +#endif } } @@ -14898,10 +14906,10 @@ static size_t mg_tcpip_driver_ra_tx(const void *buf, size_t len, struct mg_tcpip_if *ifp) { static int s_txno; // Current descriptor index if (len > sizeof(s_txbuf[ETH_DESC_CNT])) { - ifp->nerr++; MG_ERROR(("Frame too big, %ld", (long) len)); len = (size_t) -1; // fail } else if ((s_txdesc[s_txno][0] & MG_BIT(31))) { + ifp->nerr++; MG_ERROR(("No descriptors available")); len = 0; // retry later } else { diff --git a/src/drivers/imxrt.c b/src/drivers/imxrt.c index d5057c87..35235c1c 100644 --- a/src/drivers/imxrt.c +++ b/src/drivers/imxrt.c @@ -26,10 +26,15 @@ struct imxrt_enet { }; #undef ENET +#if defined(MG_DRIVER_IMXRT_RT11) && MG_DRIVER_IMXRT_RT11 +#define ENET ((struct imxrt_enet *) (uintptr_t) 0x40424000U) +#define ETH_DESC_CNT 5 // Descriptors count +#else #define ENET ((struct imxrt_enet *) (uintptr_t) 0x402D8000U) +#define ETH_DESC_CNT 4 // Descriptors count +#endif #define ETH_PKT_SIZE 1536 // Max frame size, 64-bit aligned -#define ETH_DESC_CNT 4 // Descriptors count struct enet_desc { uint16_t length; // Data length @@ -92,7 +97,7 @@ static bool mg_tcpip_driver_imxrt_init(struct mg_tcpip_if *ifp) { int cr = (d == NULL || d->mdc_cr < 0) ? 24 : d->mdc_cr; ENET->MSCR = (1 << 8) | ((cr & 0x3f) << 1); // HOLDTIME 2 clks struct mg_phy phy = {enet_read_phy, enet_write_phy}; - mg_phy_init(&phy, d->phy_addr, MG_PHY_LEDS_ACTIVE_HIGH); // MAC clocks PHY + mg_phy_init(&phy, d->phy_addr, MG_PHY_LEDS_ACTIVE_HIGH); // MAC clocks PHY // Select RMII mode, 100M, keep CRC, set max rx length, disable loop ENET->RCR = (1518 << 16) | MG_BIT(8) | MG_BIT(2); // ENET->RCR |= MG_BIT(3); // Receive all @@ -118,10 +123,10 @@ static size_t mg_tcpip_driver_imxrt_tx(const void *buf, size_t len, struct mg_tcpip_if *ifp) { static int s_txno; // Current descriptor index if (len > sizeof(s_txbuf[ETH_DESC_CNT])) { - ifp->nerr++; MG_ERROR(("Frame too big, %ld", (long) len)); len = (size_t) -1; // fail } else if ((s_txdesc[s_txno].control & MG_BIT(15))) { + ifp->nerr++; MG_ERROR(("No descriptors available")); len = 0; // retry later } else { diff --git a/src/drivers/phy.c b/src/drivers/phy.c index 1a2e4391..462fe6f1 100644 --- a/src/drivers/phy.c +++ b/src/drivers/phy.c @@ -59,9 +59,12 @@ void mg_phy_init(struct mg_phy *phy, uint8_t phy_addr, uint8_t config) { } else if (id1 == MG_PHY_LAN87x) { // nothing to do } else if (id1 == MG_PHY_RTL8201) { + // assume PHY has been hardware strapped properly +#if 0 phy->write_reg(phy_addr, MG_PHY_RTL8201_REG_PAGESEL, 7); // Select page 7 - phy->write_reg(phy_addr, MG_PHY_RTL8201_REG_RMSR, 0x7ffb); + phy->write_reg(phy_addr, MG_PHY_RTL8201_REG_RMSR, 0x1ffa); phy->write_reg(phy_addr, MG_PHY_RTL8201_REG_PAGESEL, 0); // Select page 0 +#endif } } diff --git a/src/drivers/ra.c b/src/drivers/ra.c index 1a5add8d..459a320d 100644 --- a/src/drivers/ra.c +++ b/src/drivers/ra.c @@ -182,10 +182,10 @@ static size_t mg_tcpip_driver_ra_tx(const void *buf, size_t len, struct mg_tcpip_if *ifp) { static int s_txno; // Current descriptor index if (len > sizeof(s_txbuf[ETH_DESC_CNT])) { - ifp->nerr++; MG_ERROR(("Frame too big, %ld", (long) len)); len = (size_t) -1; // fail } else if ((s_txdesc[s_txno][0] & MG_BIT(31))) { + ifp->nerr++; MG_ERROR(("No descriptors available")); len = 0; // retry later } else { From 7cc3d8998080e35d2b3102a2cd5bf1e2f9166494 Mon Sep 17 00:00:00 2001 From: "Sergio R. Caprile" Date: Fri, 22 Mar 2024 13:44:01 -0300 Subject: [PATCH 3/3] Add RT1170 example --- .../Makefile | 86 +++++ .../rt1170-evk-make-baremetal-builtin/dcd.h | 109 ++++++ .../flash_image.c | 61 ++++ .../rt1170-evk-make-baremetal-builtin/hal.h | 337 ++++++++++++++++++ .../rt1170-evk-make-baremetal-builtin/link.ld | 24 ++ .../link_ram.ld | 16 + .../rt1170-evk-make-baremetal-builtin/main.c | 61 ++++ .../mbedtls_config.h | 53 +++ .../mongoose.c | 1 + .../mongoose.h | 1 + .../mongoose_custom.h | 16 + .../rt1170-evk-make-baremetal-builtin/net.c | 1 + .../rt1170-evk-make-baremetal-builtin/net.h | 1 + .../packed_fs.c | 1 + .../syscalls.c | 98 +++++ .../sysinit.c | 48 +++ 16 files changed, 914 insertions(+) create mode 100644 examples/nxp/rt1170-evk-make-baremetal-builtin/Makefile create mode 100644 examples/nxp/rt1170-evk-make-baremetal-builtin/dcd.h create mode 100644 examples/nxp/rt1170-evk-make-baremetal-builtin/flash_image.c create mode 100644 examples/nxp/rt1170-evk-make-baremetal-builtin/hal.h create mode 100644 examples/nxp/rt1170-evk-make-baremetal-builtin/link.ld create mode 100644 examples/nxp/rt1170-evk-make-baremetal-builtin/link_ram.ld create mode 100644 examples/nxp/rt1170-evk-make-baremetal-builtin/main.c create mode 100644 examples/nxp/rt1170-evk-make-baremetal-builtin/mbedtls_config.h create mode 120000 examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose.c create mode 120000 examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose.h create mode 100644 examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose_custom.h create mode 120000 examples/nxp/rt1170-evk-make-baremetal-builtin/net.c create mode 120000 examples/nxp/rt1170-evk-make-baremetal-builtin/net.h create mode 120000 examples/nxp/rt1170-evk-make-baremetal-builtin/packed_fs.c create mode 100644 examples/nxp/rt1170-evk-make-baremetal-builtin/syscalls.c create mode 100644 examples/nxp/rt1170-evk-make-baremetal-builtin/sysinit.c diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/Makefile b/examples/nxp/rt1170-evk-make-baremetal-builtin/Makefile new file mode 100644 index 00000000..b3a07fbb --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/Makefile @@ -0,0 +1,86 @@ +CFLAGS = -W -Wall -Wextra -Werror -Wundef -Wshadow -Wdouble-promotion +CFLAGS += -Wformat-truncation -fno-common -Wconversion +CFLAGS += -g3 -Os -ffunction-sections -fdata-sections +CFLAGS += -I. -Icmsis_core/CMSIS/Core/Include -Icmsis_mcu/devices/MIMXRT1176 +CFLAGS += -Icmsis_mcu/devices/MIMXRT1176/drivers -DCPU_MIMXRT1176DVMAA_cm7 +CFLAGS += -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16 $(CFLAGS_EXTRA) +CFLAGS += -Wno-conversion -Wno-unused-parameter # due to NXP FSL code +LDSCRIPT = link.ld +LDFLAGS ?= -T$(LDSCRIPT) -nostdlib -nostartfiles --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map + +SOURCES = main.c syscalls.c sysinit.c +SOURCES += cmsis_mcu/devices/MIMXRT1176/gcc/startup_MIMXRT1176_cm7.S # NXP startup file. Compiler-dependent! +SOURCES += cmsis_mcu/devices/MIMXRT1176/drivers/fsl_clock.c cmsis_mcu/devices/MIMXRT1176/drivers/fsl_anatop_ai.c cmsis_mcu/devices/MIMXRT1176/drivers/fsl_pmu.c cmsis_mcu/devices/MIMXRT1176/drivers/fsl_dcdc.c cmsis_mcu/devices/MIMXRT1176/drivers/fsl_common_arm.c # NXP support files +CFLAGS += -D__ATOLLIC__ -D__STARTUP_CLEAR_BSS # Make startup code work as expected + +# Mongoose options are defined in mongoose_custom.h +SOURCES += mongoose.c net.c packed_fs.c + +# Example specific build options. See README.md +CFLAGS += -DHTTP_URL=\"http://0.0.0.0/\" -DHTTPS_URL=\"https://0.0.0.0/\" + +ifeq ($(OS),Windows_NT) + RM = cmd /C del /Q /F /S +else + RM = rm -rf +endif + +all build example update: SOURCES += flash_image.c +all build example: firmware.bin + +ram: LDSCRIPT = link_ram.ld +ram: firmware.bin + +firmware.bin: firmware.elf + arm-none-eabi-objcopy -O binary $< $@ + +firmware.elf: cmsis_core cmsis_mcu $(SOURCES) hal.h link_ram.ld link.ld Makefile + arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(LDFLAGS) -o $@ + arm-none-eabi-size $@ + +flash: firmware.bin +# flash + +cmsis_core: # ARM CMSIS core headers + git clone -q --depth 1 -b 5.9.0 https://github.com/ARM-software/CMSIS_5 $@ +cmsis_mcu: + curl -sL https://mcuxpresso.nxp.com/cmsis_pack/repo/NXP.MIMXRT1176_DFP.18.0.0.pack -o $@.zip + mkdir $@ && cd $@ && unzip -q ../$@.zip +mbedtls: # mbedTLS library + git clone --depth 1 -b v2.28.2 https://github.com/mbed-tls/mbedtls $@ + +ifeq ($(TLS), mbedtls) +CFLAGS += -DMG_TLS=MG_TLS_MBED -Wno-conversion -Imbedtls/include +CFLAGS += -DMBEDTLS_CONFIG_FILE=\"mbedtls_config.h\" mbedtls/library/*.c +firmware.elf: mbedtls +endif + +# Automated remote test. Requires env variable VCON_API_KEY set. See https://vcon.io/automated-firmware-tests/ +DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/15 +update: firmware.bin + curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$< + +update updateram: CFLAGS += -DUART_DEBUG=LPUART2 + +test: update + curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt + grep 'READY, IP:' /tmp/output.txt # Check for network init + + +updateram: ram + curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @firmware.bin + curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"init"}' + curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0003 wm,e000edfc,1"}' + PC=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,4"}' | jq -r .resp[5:]` && \ + SP=`curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"rm,0"}' | jq -r .resp[5:]` && \ + REQ="wm,e000ed08,0 wr,d,$$SP wr,f,$$PC" && \ + curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"'"$$REQ"'"}' + curl -su :$(VCON_API_KEY) $(DEVICE_URL)/rpc/swd.exec -d '{"req":"wm,e000edf0,a05f0001"}' + +testram: updateram + curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt + grep 'READY, IP:' /tmp/output.txt # Check for network init + + +clean: + $(RM) firmware.* *.su cmsis_core cmsis_mcu mbedtls *.zip diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/dcd.h b/examples/nxp/rt1170-evk-make-baremetal-builtin/dcd.h new file mode 100644 index 00000000..26652a6d --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/dcd.h @@ -0,0 +1,109 @@ +/* + * Copyright 2020-2021 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#define __DCD_DATA \ + 0xD2, 0x04, 0xB8, 0x41, 0xCC, 0x04, 0x0C, 0x04, 0x40, 0xCC, 0x02, 0x00, \ + 0x00, 0x00, 0x07, 0x03, 0x40, 0x0E, 0x80, 0x10, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x14, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x18, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x1C, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x20, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x24, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x28, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x2C, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x30, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x34, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x38, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x3C, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x40, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x44, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x48, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x4C, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x50, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x54, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x58, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x5C, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x60, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x64, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x68, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x6C, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x74, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x78, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x7C, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x84, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x88, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x8C, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x90, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x94, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0x98, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0x9C, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xA0, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0xA4, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xA8, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xAC, 0x00, 0x00, 0x00, 0x10, \ + 0x40, 0x0E, 0x80, 0xB8, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xBC, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xC0, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0xC4, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xC8, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xCC, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0xD0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xD4, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xD8, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0xDC, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xE0, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xE4, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xEC, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xF0, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x80, 0xF4, 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xF8, \ + 0x00, 0x00, 0x00, 0x00, 0x40, 0x0E, 0x80, 0xFC, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0E, 0x82, 0x54, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x58, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x5C, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0x60, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x64, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x68, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0x6C, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x70, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x74, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0x78, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x7C, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x80, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0x84, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x88, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x8C, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0x90, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x94, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0x98, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0x9C, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xA0, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xA4, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0xA8, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xAC, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xB0, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0xB4, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xB8, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xBC, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0xC0, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xC4, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xC8, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0xCC, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xD0, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xD4, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0xD8, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xDC, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xE0, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0xE4, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xE8, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xEC, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x82, 0xF0, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x82, 0xFC, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x83, 0x00, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x83, 0x04, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x83, 0x08, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x83, 0x0C, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x83, 0x10, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x83, 0x14, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x83, 0x18, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x83, 0x1C, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x83, 0x20, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x83, 0x24, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x83, 0x28, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x83, 0x2C, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x83, 0x30, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x83, 0x34, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x83, 0x38, \ + 0x00, 0x00, 0x00, 0x08, 0x40, 0x0E, 0x83, 0x3C, 0x00, 0x00, 0x00, 0x08, \ + 0x40, 0x0E, 0x83, 0x40, 0x00, 0x00, 0x00, 0x08, 0x40, 0x0D, 0x40, 0x00, \ + 0x10, 0x00, 0x00, 0x04, 0x40, 0x0D, 0x40, 0x08, 0x00, 0x00, 0x00, 0x81, \ + 0x40, 0x0D, 0x40, 0x0C, 0x00, 0x00, 0x00, 0x81, 0x40, 0x0D, 0x40, 0x10, \ + 0x80, 0x00, 0x00, 0x1D, 0x40, 0x0D, 0x40, 0x40, 0x00, 0x00, 0x0F, 0x32, \ + 0x40, 0x0D, 0x40, 0x44, 0x00, 0x77, 0x2A, 0x22, 0x40, 0x0D, 0x40, 0x48, \ + 0x00, 0x01, 0x0A, 0x0D, 0x40, 0x0D, 0x40, 0x4C, 0x21, 0x21, 0x04, 0x08, \ + 0x40, 0x0D, 0x40, 0x90, 0x80, 0x00, 0x00, 0x00, 0x40, 0x0D, 0x40, 0x94, \ + 0x00, 0x00, 0x00, 0x02, 0x40, 0x0D, 0x40, 0x98, 0x00, 0x00, 0x00, 0x00, \ + 0x40, 0x0D, 0x40, 0x9C, 0xA5, 0x5A, 0x00, 0x0F, 0xC0, 0x00, 0x04, 0x00, \ + 0xC0, 0x00, 0x04, 0x00, 0xC0, 0x00, 0x04, 0x00, 0xC0, 0x00, 0x04, 0x00, \ + 0xC0, 0x00, 0x04, 0x00, 0xCC, 0x00, 0x14, 0x04, 0x40, 0x0D, 0x40, 0x3C, \ + 0x00, 0x00, 0x00, 0x03, 0x40, 0x0D, 0x40, 0x9C, 0xA5, 0x5A, 0x00, 0x0C, \ + 0xC0, 0x00, 0x04, 0x00, 0xC0, 0x00, 0x04, 0x00, 0xC0, 0x00, 0x04, 0x00, \ + 0xC0, 0x00, 0x04, 0x00, 0xC0, 0x00, 0x04, 0x00, 0xCC, 0x00, 0x14, 0x04, \ + 0x40, 0x0D, 0x40, 0x3C, 0x00, 0x00, 0x00, 0x03, 0x40, 0x0D, 0x40, 0x9C, \ + 0xA5, 0x5A, 0x00, 0x0C, 0xC0, 0x00, 0x04, 0x00, 0xC0, 0x00, 0x04, 0x00, \ + 0xC0, 0x00, 0x04, 0x00, 0xC0, 0x00, 0x04, 0x00, 0xC0, 0x00, 0x04, 0x00, \ + 0xCC, 0x00, 0x1C, 0x04, 0x40, 0x0D, 0x40, 0x3C, 0x00, 0x00, 0x00, 0x03, \ + 0x40, 0x0D, 0x40, 0xA0, 0x00, 0x00, 0x00, 0x33, 0x40, 0x0D, 0x40, 0x9C, \ + 0xA5, 0x5A, 0x00, 0x0A, 0xC0, 0x00, 0x04, 0x00, 0xC0, 0x00, 0x04, 0x00, \ + 0xC0, 0x00, 0x04, 0x00, 0xC0, 0x00, 0x04, 0x00, 0xC0, 0x00, 0x04, 0x00, \ + 0xCC, 0x00, 0x14, 0x04, 0x40, 0x0D, 0x40, 0x3C, 0x00, 0x00, 0x00, 0x03, \ + 0x40, 0x0D, 0x40, 0x4C, 0x21, 0x21, 0x04, 0x09 diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/flash_image.c b/examples/nxp/rt1170-evk-make-baremetal-builtin/flash_image.c new file mode 100644 index 00000000..f0badffe --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/flash_image.c @@ -0,0 +1,61 @@ +#include "dcd.h" // pin settings for MIMXRT1060-EVKB board +#include "fsl_flexspi.h" // peripheral structures +#include "fsl_romapi.h" // peripheral structures +#include "hal.h" + +extern uint32_t __isr_vector[]; + +// RM 10.7.2 +__attribute__((section(".dcd"), used)) +const uint8_t __ivt_dcd_data[] = {__DCD_DATA}; + +// RM 10.7.1 +__attribute__((section(".dat"), used)) const uint32_t __ivt_boot_data[] = { + FlexSPI1_AMBA_BASE, // boot start location + 64 * 1024 * 1024, // size + 0, // Plugin flag + 0Xffffffff // empty - extra data word +}; + +__attribute__((section(".ivt"), used)) const uint32_t __ivt[8] = { + 0x412000d1, // header: 41 - version, 2000 size, d1 tag + (uint32_t) __isr_vector, // entry + 0, // reserved + (uint32_t) __ivt_dcd_data, // dcd + (uint32_t) __ivt_boot_data, // boot data + (uint32_t) __ivt, // this is us - ivt absolute address + 0, // csf absolute address + 0, // reserved for HAB +}; + +#define __FLEXSPI_QSPI_LUT { \ + [0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEC, RADDR_SDR, FLEXSPI_4PAD, 0x20),\ + [1] = FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),\ + [4 * 1 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x04),\ + [4 * 3 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0x0),\ + [4 * 5 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x21, RADDR_SDR, FLEXSPI_1PAD, 0x20),\ + [4 * 8 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8, RADDR_SDR, FLEXSPI_1PAD, 0x18),\ + [4 * 9 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x12, RADDR_SDR, FLEXSPI_1PAD, 0x20),\ + [4 * 9 + 1] = FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0),\ + [4 * 11 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0x0),\ +} + +// MIMXRT1170-EVKB flash chip config: W25Q512NWEIQ +__attribute__((section(".cfg"), used)) +const flexspi_nor_config_t __qspi_flash_cfg = { + .memConfig = {.tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = 1, // ReadSampleClk_LoopbackFromDqsPad + .csHoldTime = 3, + .csSetupTime = 3, + .controllerMiscOption = BIT(4), + .deviceType = 1, // serial NOR + .sflashPadType = 4, + .serialClkFreq = 7, // 133MHz + .sflashA1Size = 64 * 1024 * 1024, + .lookupTable = __FLEXSPI_QSPI_LUT}, + .pageSize = 256, + .sectorSize = 4 * 1024, + .ipcmdSerialClkFreq = 1, + .blockSize = 64 * 1024, + .isUniformBlockSize = false}; diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/hal.h b/examples/nxp/rt1170-evk-make-baremetal-builtin/hal.h new file mode 100644 index 00000000..82c937eb --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/hal.h @@ -0,0 +1,337 @@ +// Copyright (c) 2024 Cesanta Software Limited +// All rights reserved +// https://www.nxp.com/webapp/Download?colCode=IMXRT1170RM +// https://www.nxp.com/webapp/Download?colCode=MIMXRT1170EVKBHUG + +#pragma once + +#include "MIMXRT1176_cm7.h" + +#include +#include +#include +#include + +#define BIT(x) (1UL << (x)) +#define SETBITS(R, CLEARMASK, SETMASK) (R) = ((R) & ~(CLEARMASK)) | (SETMASK) +#define PIN(bank, num) ((((bank) - '0') << 8) | (num)) +#define PINNO(pin) (pin & 255) +#define PINBANK(pin) (pin >> 8) + +// Use LED for blinking, D6: GPIO_AD_04. GPIO3.3 (schematics, RM) +#define LED PIN('3', 3) + +#ifndef UART_DEBUG +#define UART_DEBUG LPUART1 +#endif + +// No settable constants, see sysinit.c +#define SYS_FREQUENCY 996000000UL + +static inline void spin(volatile uint32_t count) { + while (count--) (void) 0; +} + +// Use "Unassigned/Domain Mode" +static inline void clock_periph(uint32_t index, bool val) { + CCM->LPCG[index].DIRECT = val ? 1 : 0; // (15.9.1.25) +} + +// which peripheral feeds the pin +static inline void gpio_mux_config(uint16_t index, uint8_t af) { + IOMUXC->SW_MUX_CTL_PAD[index] = af; +} + +// which pin feeds the peripheral (2nd stage) +static inline void periph_mux_config(uint16_t index, uint8_t in) { + IOMUXC->SELECT_INPUT[index] = in; +} + +// CM7_GPIOx not supported +enum { GPIO_MODE_INPUT, GPIO_MODE_OUTPUT }; +enum { GPIO_OTYPE_PUSH_PULL, GPIO_OTYPE_OPEN_DRAIN }; +enum { GPIO_SPEED_LOW, GPIO_SPEED_MEDIUM, GPIO_SPEED_MEDIUM_, GPIO_SPEED_HIGH }; +enum { GPIO_PULL_NONE, GPIO_PULL_UP, GPIO_PULL_DOWN }; +static inline GPIO_Type *gpio_bank(uint16_t pin) { + static const GPIO_Type *g[] = {NULL, GPIO1, GPIO2, GPIO3, GPIO4, + GPIO5, GPIO6, GPIO7, GPIO8, GPIO9, + GPIO10, GPIO11, GPIO12, GPIO13}; + return (GPIO_Type *) g[PINBANK(pin)]; +} + +// pin driver/pull-up/down configuration (allow both cores) +static inline void gpio_pad_config(uint16_t index, uint8_t type, uint8_t speed, + uint8_t pull) { + if (index < kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_00 || + (index >= kIOMUXC_SW_PAD_CTL_PAD_GPIO_SD_B1_00 && + index < kIOMUXC_SW_PAD_CTL_PAD_GPIO_DISP_B2_00)) { + IOMUXC->SW_PAD_CTL_PAD[index] = + IOMUXC_SW_PAD_CTL_PAD_PDRV(speed == GPIO_SPEED_LOW) | + IOMUXC_SW_PAD_CTL_PAD_ODE(type) | IOMUXC_SW_PAD_CTL_PAD_PULL(pull); + } else { + bool dopull = pull > 0; + if (dopull) pull = (pull == GPIO_PULL_UP); + IOMUXC->SW_PAD_CTL_PAD[index] = + IOMUXC_SW_PAD_CTL_PAD_DSE(speed != GPIO_SPEED_LOW) | + IOMUXC_SW_PAD_CTL_PAD_ODE(type) | IOMUXC_SW_PAD_CTL_PAD_PUE(dopull) | + IOMUXC_SW_PAD_CTL_PAD_PUS(pull) | + IOMUXC_SW_PAD_CTL_PAD_SRE(speed >= GPIO_SPEED_HIGH); + } +} + +static inline void gpio_init(uint16_t pin, uint8_t mode, uint8_t type, + uint8_t speed, uint8_t pull) { + GPIO_Type *gpio = gpio_bank(pin); + uint8_t bit = (uint8_t) PINNO(pin); + uint32_t mask = (uint32_t) BIT(PINNO(pin)); + + clock_periph(51, 1); // clk_enable_gpio (15.5.4 Table 15-5) + clock_periph(49, 1); // clk_enable_iomuxc (15.5.4 Table 15-5) + switch (PINBANK(pin)) { // (11.1.1 Table 11-1) + case 1: + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_00 + bit, 5); + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_00 + bit, type, speed, + pull); + break; + case 2: + IOMUXC_GPR->GPR40 = 0; // select GPIO2 + IOMUXC_GPR->GPR41 = 0; // select GPIO2 + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_32 + bit, 5); + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_32 + bit, type, speed, + pull); + break; + case 3: + IOMUXC_GPR->GPR42 = 0; // select GPIO3 + IOMUXC_GPR->GPR43 = 0; // select GPIO3 + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_01 + bit, 5); + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_01 + bit, type, speed, + pull); + break; + case 4: + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_33 + bit, 5); + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_33 + bit, type, speed, + pull); + break; + default: + // TODO(): support GPIO5-13, 10-15 requires redefinition of PIN() macro + break; + } + + gpio->IMR &= ~mask; + if (mode == GPIO_MODE_INPUT) { + gpio->GDIR &= ~mask; + } else { + gpio->GDIR |= mask; + } +} +static inline void gpio_input(uint16_t pin) { + gpio_init(pin, GPIO_MODE_INPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, + GPIO_PULL_NONE); +} +static inline void gpio_output(uint16_t pin) { + gpio_init(pin, GPIO_MODE_OUTPUT, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, + GPIO_PULL_NONE); +} + +static inline bool gpio_read(uint16_t pin) { + GPIO_Type *gpio = gpio_bank(pin); + uint32_t mask = (uint32_t) BIT(PINNO(pin)); + return gpio->DR & mask; +} +static inline void gpio_write(uint16_t pin, bool value) { + GPIO_Type *gpio = gpio_bank(pin); + uint32_t mask = (uint32_t) BIT(PINNO(pin)); + if (value) { + gpio->DR |= mask; + } else { + gpio->DR &= ~mask; + } +} +static inline void gpio_toggle(uint16_t pin) { + gpio_write(pin, !gpio_read(pin)); +} + +// 15.3 Table 15-2: uart_clk_root +// 15.4: lpuart*_clk_root 15.5.3 Table 15-4; 15.9.1.2; select OSC_24M +static inline void uart_init(LPUART_Type *uart, unsigned long baud) { + uint8_t af = 0; // Alternate function + uint16_t mr = 0, pr = 0, mt = 0, pt = 0; // pins + uint32_t freq = 24000000; // uart_clk_root frequency + if (uart == LPUART1) { + af = 0; + mt = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_24; + pt = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_24; + mr = kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_25; + pr = kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_25; + // configure clock root source and divisor /1, enable peripheral clock + CCM->CLOCK_ROOT[25].CONTROL = + CCM_CLOCK_ROOT_CONTROL_MUX(1) | CCM_CLOCK_ROOT_CONTROL_DIV(0); + clock_periph(86, 1); // (15.5.4 Table 15-5) + periph_mux_config(kIOMUXC_LPUART1_LPUART_RXD_SELECT_INPUT, 0); + periph_mux_config(kIOMUXC_LPUART1_LPUART_TXD_SELECT_INPUT, 0); + } else if (uart == LPUART2) { + af = 2; + mt = kIOMUXC_SW_MUX_CTL_PAD_GPIO_DISP_B2_10; + pt = kIOMUXC_SW_PAD_CTL_PAD_GPIO_DISP_B2_10; + mr = kIOMUXC_SW_MUX_CTL_PAD_GPIO_DISP_B2_11; + pr = kIOMUXC_SW_PAD_CTL_PAD_GPIO_DISP_B2_11; + CCM->CLOCK_ROOT[26].CONTROL = + CCM_CLOCK_ROOT_CONTROL_MUX(1) | CCM_CLOCK_ROOT_CONTROL_DIV(0); + clock_periph(87, 1); // (15.5.4 Table 15-5) + } + clock_periph(49, 1); // clk_enable_iomuxc (15.5.4 Table 15-5) + gpio_mux_config(mt, af); + gpio_pad_config(pt, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, GPIO_PULL_NONE); + gpio_mux_config(mr, af); + gpio_pad_config(pr, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, GPIO_PULL_UP); + + uart->GLOBAL |= LPUART_GLOBAL_RST_MASK; // reset, CTRL = 0, defaults + uart->GLOBAL &= ~LPUART_GLOBAL_RST_MASK; + uart->BAUD = LPUART_BAUD_OSR(16 - 1) | + LPUART_BAUD_SBR(freq / (16 * baud)); // Rx sample at 16x + uart->CTRL = LPUART_CTRL_IDLECFG(1) | + LPUART_CTRL_ILT(1); // no parity, idle 2 chars after 1 stop bit + uart->CTRL |= LPUART_CTRL_TE_MASK | LPUART_CTRL_RE_MASK; +} + +static inline void uart_write_byte(LPUART_Type *uart, uint8_t byte) { + uart->DATA = byte; + while ((uart->STAT & LPUART_STAT_TDRE_MASK) == 0) spin(1); +} +static inline void uart_write_buf(LPUART_Type *uart, char *buf, size_t len) { + while (len-- > 0) uart_write_byte(uart, *(uint8_t *) buf++); +} +static inline int uart_read_ready(LPUART_Type *uart) { + (void) uart; + return uart->STAT & LPUART_STAT_RDRF_MASK; +} +static inline uint8_t uart_read_byte(LPUART_Type *uart) { + return (uint8_t) (uart->DATA & 255); +} + + +static inline void lpsr_mux_config(uint16_t index, uint8_t af) { + IOMUXC_LPSR->SW_MUX_CTL_PAD[index] = af; +} + +static inline void lpsr_pad_config(uint16_t index, uint8_t type, uint8_t speed, + uint8_t pull) { + bool dopull = pull > 0; + if (dopull) pull = (pull == GPIO_PULL_UP); + IOMUXC_LPSR->SW_PAD_CTL_PAD[index] = + IOMUXC_LPSR_SW_PAD_CTL_PAD_DSE(speed != GPIO_SPEED_LOW) | + IOMUXC_LPSR_SW_PAD_CTL_PAD_ODE_LPSR(type) | + IOMUXC_SW_PAD_CTL_PAD_PUE(dopull) | IOMUXC_LPSR_SW_PAD_CTL_PAD_PUS(pull) | + IOMUXC_LPSR_SW_PAD_CTL_PAD_SRE(speed >= GPIO_SPEED_HIGH); +} + +#include "fsl_clock.h" + +// - 15.4 clock tree +// - 15.3 Table 15-2: ENET1_CLK_ROOT <= 50MHz +// - PHY has no xtal, XI driven from ENET_REF_CLK (labeled as ENET_TX_REF_CLK +// (GPIO_DISP_B2_05)), generated by the MCU +// - PHY RST connected to GPIO12.12 (GPIO_LPSR_12); +// - 60.4 REF_CLK is RMII mode reference clock for Rx, Tx, and SMI; it is I/O +static inline void ethernet_init(void) { + const clock_sys_pll1_config_t pll1 = {.pllDiv2En = true}; + CLOCK_InitSysPll1(&pll1); // setup PLL1 and clock ENET from it + // configure clock root source PLL1/2 and divisor /10, enable peripheral clock + CCM->CLOCK_ROOT[51].CONTROL = + CCM_CLOCK_ROOT_CONTROL_MUX(4) | CCM_CLOCK_ROOT_CONTROL_DIV(10 - 1); + clock_periph(112, 1); // clk_enable_enet (15.5.4 Table 15-5) + + clock_periph(51, 1); // clk_enable_gpio (15.5.4 Table 15-5) + clock_periph(50, 1); // clk_enable_iomuxc_lpsr (15.5.4 Table 15-5) + clock_periph(49, 1); // clk_enable_iomuxc (15.5.4 Table 15-5) + lpsr_mux_config(kIOMUXC_LPSR_SW_MUX_CTL_PAD_GPIO_LPSR_12, + 10); // set GPIO12.12 as GPIO (PHY \RST) + lpsr_pad_config(kIOMUXC_LPSR_SW_PAD_CTL_PAD_GPIO_LPSR_12, + GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_MEDIUM, GPIO_PULL_UP); + GPIO12->IMR &= ~BIT(12); + GPIO12->GDIR |= BIT(12); + GPIO12->DR &= ~BIT(12); // reset PHY + + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_DISP_B2_05, + 2); // set for ENET_REF_CLK + IOMUXC->SW_MUX_CTL_PAD[kIOMUXC_SW_MUX_CTL_PAD_GPIO_DISP_B2_05] |= + IOMUXC_SW_MUX_CTL_PAD_SION(1); // loop signal back from pin + periph_mux_config(kIOMUXC_ENET_IPG_CLK_RMII_SELECT_INPUT, + 1); // drive peripheral from DISP_B2_05, so RMII clock is + // taken from ENET_REF_CLK + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_DISP_B2_05, GPIO_OTYPE_PUSH_PULL, + GPIO_SPEED_HIGH, GPIO_PULL_NONE); + IOMUXC_GPR->GPR4 |= + IOMUXC_GPR_GPR4_ENET_REF_CLK_DIR(1); // Set ENET_REF_CLK as output + + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_DISP_B2_06, + 1); // set for RXDATA0 + periph_mux_config(kIOMUXC_ENET_MAC0_RXDATA_SELECT_INPUT_0, + 1); // drive peripheral from DISP_B2_06 + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_DISP_B2_06, GPIO_OTYPE_PUSH_PULL, + GPIO_SPEED_HIGH, GPIO_PULL_DOWN); + + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_DISP_B2_07, + 1); // set for RXDATA1 + periph_mux_config(kIOMUXC_ENET_MAC0_RXDATA_SELECT_INPUT_1, + 1); // drive peripheral from DISP_B2_07 + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_DISP_B2_07, GPIO_OTYPE_PUSH_PULL, + GPIO_SPEED_HIGH, GPIO_PULL_DOWN); + + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_DISP_B2_08, 1); // set for CRS + periph_mux_config(kIOMUXC_ENET_MAC0_RXEN_SELECT_INPUT, + 1); // drive peripheral from DISP_B2_08 + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_DISP_B2_08, GPIO_OTYPE_PUSH_PULL, + GPIO_SPEED_HIGH, GPIO_PULL_DOWN); + + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_DISP_B2_09, 1); // set for RXERR + periph_mux_config(kIOMUXC_ENET_MAC0_RXERR_SELECT_INPUT, + 1); // drive peripheral from DISP_B2_09 + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_DISP_B2_09, GPIO_OTYPE_PUSH_PULL, + GPIO_SPEED_HIGH, GPIO_PULL_DOWN); + + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_DISP_B2_02, + 1); // set for TXDATA0 + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_DISP_B2_02, GPIO_OTYPE_PUSH_PULL, + GPIO_SPEED_HIGH, GPIO_PULL_NONE); + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_DISP_B2_03, + 1); // set for TXDATA1 + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_DISP_B2_03, GPIO_OTYPE_PUSH_PULL, + GPIO_SPEED_HIGH, GPIO_PULL_NONE); + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_DISP_B2_04, 1); // set for TXEN + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_DISP_B2_04, GPIO_OTYPE_PUSH_PULL, + GPIO_SPEED_HIGH, GPIO_PULL_NONE); + + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_32, 3); // set for MDC + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_32, GPIO_OTYPE_PUSH_PULL, + GPIO_SPEED_MEDIUM, GPIO_PULL_NONE); + gpio_mux_config(kIOMUXC_SW_MUX_CTL_PAD_GPIO_AD_33, 3); // set for MDIO + periph_mux_config(kIOMUXC_ENET_MAC0_MDIO_SELECT_INPUT, + 1); // drive peripheral from AD_33 + gpio_pad_config(kIOMUXC_SW_PAD_CTL_PAD_GPIO_AD_33, GPIO_OTYPE_PUSH_PULL, + GPIO_SPEED_MEDIUM, GPIO_PULL_UP); + + IOMUXC_GPR->GPR28 &= ~IOMUXC_GPR_GPR28_CACHE_ENET_MASK; // ERR050396 + gpio_init(PIN('3', 11), GPIO_MODE_INPUT, 0, GPIO_SPEED_MEDIUM, + GPIO_PULL_UP); // setup IRQ (pulled-up)(not used) + spin(10000); // keep PHY RST low for a while + GPIO12->DR |= BIT(12); // deassert RST + + clock_periph(112, 1); // clk_enable_enet (15.5.4 Table 15-5) + NVIC_EnableIRQ(ENET_IRQn); // Setup Ethernet IRQ handler +} + +// Helper macro for MAC generation, byte reads not allowed +#define GENERATE_LOCALLY_ADMINISTERED_MAC() \ + { \ + 2, OCOTP->FUSEN[16].FUSE & 255, (OCOTP->FUSEN[16].FUSE >> 10) & 255, \ + ((OCOTP->FUSEN[16].FUSE >> 19) ^ (OCOTP->FUSEN[17].FUSE >> 19)) & 255, \ + (OCOTP->FUSEN[17].FUSE >> 10) & 255, OCOTP->FUSEN[17].FUSE & 255 \ + } + +static inline void flash_init(void) { // QSPI in FlexSPI + // set pins + clock_periph(49, 1); // clk_enable_iomuxc (15.5.4 Table 15-5) +#if 0 +#endif +} diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/link.ld b/examples/nxp/rt1170-evk-make-baremetal-builtin/link.ld new file mode 100644 index 00000000..e7595e02 --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/link.ld @@ -0,0 +1,24 @@ +ENTRY(Reset_Handler); +MEMORY { + flash_hdr(rx) : ORIGIN = 0x30000000, LENGTH = 8k + flash_irq(rx) : ORIGIN = 0x30002000, LENGTH = 1k + flash_code(rx) : ORIGIN = 0x30002400, LENGTH = 65527k + + itcram(rx) : ORIGIN = 0x00000000, LENGTH = 256k + dtcram(rw) : ORIGIN = 0x20000000, LENGTH = 256k + ocram(rw) : ORIGIN = 0x20240000, LENGTH = 512k /* Is this cached ? */ +} +__StackTop = ORIGIN(dtcram) + LENGTH(dtcram); + +/* TODO(): separate itcram and go back to using dtcram for data and bss when ota is finished */ + +SECTIONS { + .hdr : { FILL(0xff) ; . = 0x400 ; KEEP(*(.cfg)) . = 0x1000 ; KEEP(*(.ivt)) . = 0x1020 ; + KEEP(*(.dat)) . = 0x1030 ; KEEP(*(.dcd)) . = 0x2000 ;} >flash_hdr + .irq : { KEEP(*(.isr_vector)) } > flash_irq + .text : { *(.text* .text.*) *(.rodata*) ; } > flash_code + .data : { __data_start__ = .; *(.data SORT(.data.*)) *(.iram) __data_end__ = .; } > itcram AT > flash_code + __etext = LOADADDR(.data); + .bss : { __bss_start__ = .; *(.bss SORT(.bss.*) COMMON) __bss_end__ = .; } > itcram + _end = .; +} diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/link_ram.ld b/examples/nxp/rt1170-evk-make-baremetal-builtin/link_ram.ld new file mode 100644 index 00000000..2df25a56 --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/link_ram.ld @@ -0,0 +1,16 @@ +ENTRY(Reset_Handler); +MEMORY { + itcram(rx) : ORIGIN = 0x00000000, LENGTH = 256k + dtcram(rw) : ORIGIN = 0x20000000, LENGTH = 256k + ocram(rw) : ORIGIN = 0x20240000, LENGTH = 512k /* Is this cached ? */ +} +__StackTop = ORIGIN(dtcram) + LENGTH(dtcram); + +SECTIONS { + .irq : { KEEP(*(.isr_vector)) } > itcram + .text : { *(.text* .text.*) *(.rodata*) ; } > itcram + .data : { __data_start__ = .; *(.data SORT(.data.*)) __data_end__ = .; } > dtcram AT > itcram + __etext = LOADADDR(.data); + .bss : { __bss_start__ = .; *(.bss SORT(.bss.*) COMMON) __bss_end__ = .; } > dtcram + _end = .; +} diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/main.c b/examples/nxp/rt1170-evk-make-baremetal-builtin/main.c new file mode 100644 index 00000000..936582e9 --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/main.c @@ -0,0 +1,61 @@ +// Copyright (c) 2024 Cesanta Software Limited +// All rights reserved + +#include "hal.h" +#include "mongoose.h" +#include "net.h" + +#define BLINK_PERIOD_MS 1000 // LED blinking period in millis + +static volatile uint64_t s_ticks; // Milliseconds since boot +void SysTick_Handler(void) { // SyStick IRQ handler, triggered every 1ms + s_ticks++; +} + +uint64_t mg_millis(void) { // Let Mongoose use our uptime function + return s_ticks; // Return number of milliseconds since boot +} + +static void timer_fn(void *arg) { + gpio_toggle(LED); // Blink LED + (void) arg; +} + +int main(void) { + gpio_output(LED); // Setup blue LED + uart_init(UART_DEBUG, 115200); // Initialise debug printf + ethernet_init(); // Initialise ethernet pins + MG_INFO(("Starting, CPU freq %g MHz", (double) SystemCoreClock / 1000000)); + + struct mg_mgr mgr; // Initialise + mg_mgr_init(&mgr); // Mongoose event manager + mg_log_set(MG_LL_DEBUG); // Set log level + + // Initialise Mongoose network stack + struct mg_tcpip_driver_imxrt_data driver_data = {.mdc_cr = 24, .phy_addr = 3}; + struct mg_tcpip_if mif = {.mac = GENERATE_LOCALLY_ADMINISTERED_MAC(), + // Uncomment below for static configuration: + // .ip = mg_htonl(MG_U32(192, 168, 0, 223)), + // .mask = mg_htonl(MG_U32(255, 255, 255, 0)), + // .gw = mg_htonl(MG_U32(192, 168, 0, 1)), + .driver = &mg_tcpip_driver_imxrt, + .driver_data = &driver_data}; + mg_tcpip_init(&mgr, &mif); + mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, NULL); + + MG_INFO(("MAC: %M. Waiting for IP...", mg_print_mac, mif.mac)); + while (mif.state != MG_TCPIP_STATE_READY) { + mg_mgr_poll(&mgr, 0); + } + + MG_INFO(("Initialising application...")); + web_init(&mgr); + + + MG_INFO(("Starting event loop")); + for (;;) { + mg_mgr_poll(&mgr, 0); + } + return 0; +} + diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/mbedtls_config.h b/examples/nxp/rt1170-evk-make-baremetal-builtin/mbedtls_config.h new file mode 100644 index 00000000..3e8d768f --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/mbedtls_config.h @@ -0,0 +1,53 @@ +/* Workaround for some mbedtls source files using INT_MAX without including limits.h */ +#include + +#define MBEDTLS_NO_PLATFORM_ENTROPY +#define MBEDTLS_ENTROPY_HARDWARE_ALT +#define MBEDTLS_SSL_OUT_CONTENT_LEN 2048 +#define MBEDTLS_ALLOW_PRIVATE_ACCESS +#define MBEDTLS_HAVE_TIME +#define MBEDTLS_SSL_SESSION_TICKETS + +#define MBEDTLS_CIPHER_MODE_CBC +#define MBEDTLS_ECP_DP_SECP256R1_ENABLED +#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED +#define MBEDTLS_PKCS1_V15 +#define MBEDTLS_SHA256_SMALLER +#define MBEDTLS_SSL_SERVER_NAME_INDICATION +#define MBEDTLS_AES_C +#define MBEDTLS_ASN1_PARSE_C +#define MBEDTLS_BIGNUM_C +#define MBEDTLS_CIPHER_C +#define MBEDTLS_CTR_DRBG_C +#define MBEDTLS_ENTROPY_C +#define MBEDTLS_ERROR_C +#define MBEDTLS_MD_C +#define MBEDTLS_MD5_C +#define MBEDTLS_OID_C +#define MBEDTLS_PKCS5_C +#define MBEDTLS_PK_C +#define MBEDTLS_PK_PARSE_C +#define MBEDTLS_PLATFORM_C +#define MBEDTLS_RSA_C +#define MBEDTLS_SHA1_C +#define MBEDTLS_SHA224_C +#define MBEDTLS_SHA256_C +#define MBEDTLS_SHA512_C +#define MBEDTLS_SSL_CLI_C +#define MBEDTLS_SSL_SRV_C +#define MBEDTLS_SSL_TLS_C +#define MBEDTLS_X509_CRT_PARSE_C +#define MBEDTLS_X509_USE_C +#define MBEDTLS_AES_FEWER_TABLES +#define MBEDTLS_PEM_PARSE_C +#define MBEDTLS_BASE64_C +#define MBEDTLS_SSL_TICKET_C + +#define MBEDTLS_SSL_PROTO_TLS1_2 +#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED +#define MBEDTLS_GCM_C +#define MBEDTLS_ECDH_C +#define MBEDTLS_ECP_C +#define MBEDTLS_ECDSA_C +#define MBEDTLS_ASN1_WRITE_C + diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose.c b/examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose.c new file mode 120000 index 00000000..5e522bbc --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose.c @@ -0,0 +1 @@ +../../../mongoose.c \ No newline at end of file diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose.h b/examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose.h new file mode 120000 index 00000000..ee4ac823 --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose.h @@ -0,0 +1 @@ +../../../mongoose.h \ No newline at end of file diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose_custom.h b/examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose_custom.h new file mode 100644 index 00000000..61211e19 --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/mongoose_custom.h @@ -0,0 +1,16 @@ +#pragma once + +// See https://mongoose.ws/documentation/#build-options +#define MG_ARCH MG_ARCH_NEWLIB +#define MG_OTA MG_OTA_FLASH +#define MG_DEVICE MG_DEVICE_RT1060 + +#define MG_ENABLE_TCPIP 1 +#define MG_ENABLE_DRIVER_IMXRT 1 +#define MG_DRIVER_IMXRT_RT11 1 +#define MG_ENABLE_TCPIP_DRIVER_INIT 0 +#define MG_IO_SIZE 256 +#define MG_ENABLE_CUSTOM_MILLIS 1 +#define MG_ENABLE_CUSTOM_RANDOM 0 +#define MG_ENABLE_PACKED_FS 1 +#define MG_ENABLE_TCPIP_PRINT_DEBUG_STATS 1 diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/net.c b/examples/nxp/rt1170-evk-make-baremetal-builtin/net.c new file mode 120000 index 00000000..fe0e6f06 --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/net.c @@ -0,0 +1 @@ +../../device-dashboard/net.c \ No newline at end of file diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/net.h b/examples/nxp/rt1170-evk-make-baremetal-builtin/net.h new file mode 120000 index 00000000..9de896ef --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/net.h @@ -0,0 +1 @@ +../../device-dashboard/net.h \ No newline at end of file diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/packed_fs.c b/examples/nxp/rt1170-evk-make-baremetal-builtin/packed_fs.c new file mode 120000 index 00000000..e06bf092 --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/packed_fs.c @@ -0,0 +1 @@ +../../device-dashboard/packed_fs.c \ No newline at end of file diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/syscalls.c b/examples/nxp/rt1170-evk-make-baremetal-builtin/syscalls.c new file mode 100644 index 00000000..6fef1007 --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/syscalls.c @@ -0,0 +1,98 @@ +#include + +#include "hal.h" + +int _fstat(int fd, struct stat *st) { + if (fd < 0) return -1; + st->st_mode = S_IFCHR; + return 0; +} + +void *_sbrk(int incr) { + extern char _end; + static unsigned char *heap = NULL; + unsigned char *prev_heap; + unsigned char x = 0, *heap_end = (unsigned char *)((size_t) &x - 512); + (void) x; + if (heap == NULL) heap = (unsigned char *) &_end; + prev_heap = heap; + if (heap + incr > heap_end) return (void *) -1; + heap += incr; + return prev_heap; +} + +int _open(const char *path) { + (void) path; + return -1; +} + +int _close(int fd) { + (void) fd; + return -1; +} + +int _isatty(int fd) { + (void) fd; + return 1; +} + +int _lseek(int fd, int ptr, int dir) { + (void) fd, (void) ptr, (void) dir; + return 0; +} + +void _exit(int status) { + (void) status; + for (;;) asm volatile("BKPT #0"); +} + +void _kill(int pid, int sig) { + (void) pid, (void) sig; +} + +int _getpid(void) { + return -1; +} + +int _write(int fd, char *ptr, int len) { + (void) fd, (void) ptr, (void) len; + if (fd == 1) uart_write_buf(UART_DEBUG, ptr, (size_t) len); + return -1; +} + +int _read(int fd, char *ptr, int len) { + (void) fd, (void) ptr, (void) len; + return -1; +} + +int _link(const char *a, const char *b) { + (void) a, (void) b; + return -1; +} + +int _unlink(const char *a) { + (void) a; + return -1; +} + +int _stat(const char *path, struct stat *st) { + (void) path, (void) st; + return -1; +} + +int mkdir(const char *path, mode_t mode) { + (void) path, (void) mode; + return -1; +} + +void _init(void) {} + +extern uint64_t mg_now(void); + +int _gettimeofday(struct timeval *tv, void *tz) { + uint64_t now = mg_now(); + (void) tz; + tv->tv_sec = (time_t) (now / 1000); + tv->tv_usec = (unsigned long) ((now % 1000) * 1000); + return 0; +} diff --git a/examples/nxp/rt1170-evk-make-baremetal-builtin/sysinit.c b/examples/nxp/rt1170-evk-make-baremetal-builtin/sysinit.c new file mode 100644 index 00000000..48d1f2af --- /dev/null +++ b/examples/nxp/rt1170-evk-make-baremetal-builtin/sysinit.c @@ -0,0 +1,48 @@ +// Copyright (c) 2024 Cesanta Software Limited +// All rights reserved +// +// This file contains essentials required by the CMSIS: +// uint32_t SystemCoreClock - holds the system core clock value +// SystemInit() - initialises the system, e.g. sets up clocks + +#include "hal.h" +#include "fsl_clock.h" +#include "fsl_dcdc.h" +#include "fsl_pmu.h" + +uint32_t SystemCoreClock = SYS_FREQUENCY; + +// - 15.4 clock tree +// 15.4: M7_CLK_ROOT +// 15.5.3 Table 15-4; 15.9.1.2; select PLL_ARM_CLK +// 15.8.2 PLL Enable Sequence +// - Datasheet 4.1.3, Table 11: "Overdrive" run mode particulars +void SystemInit(void) { // Called automatically by startup code (ints masked) + SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2)); // Enable FPU + asm("DSB"); + asm("ISB"); + // 79.5.2: Disable watchdogS after reset (unlocked) + RTWDOG3->CS &= ~RTWDOG_CS_EN_MASK; + RTWDOG3->TOVAL = 0xFFFF; + while (RTWDOG3->CS & RTWDOG_CS_ULK_MASK) spin(1); // wait for lock + while ((RTWDOG3->CS & RTWDOG_CS_RCS_MASK) == 0) + spin(1); // wait for new config + RTWDOG4->CS &= ~RTWDOG_CS_EN_MASK; + RTWDOG4->TOVAL = 0xFFFF; + while (RTWDOG4->CS & RTWDOG_CS_ULK_MASK) spin(1); // wait for lock + while ((RTWDOG4->CS & RTWDOG_CS_RCS_MASK) == 0) + spin(1); // wait for new config + ANADIG_OSC->OSC_24M_CTRL |= ANADIG_OSC_OSC_24M_CTRL_OSC_EN(1) | ANADIG_OSC_OSC_24M_CTRL_LP_EN(1); + while ((ANADIG_OSC->OSC_24M_CTRL & ANADIG_OSC_OSC_24M_CTRL_OSC_24M_STABLE_MASK) == 0) + spin(1); // wait until it is stable + DCDC_BootIntoDCM(DCDC); // Enable "overdrive" mode as needed + DCDC_SetVDD1P0BuckModeTargetVoltage(DCDC, kDCDC_1P0BuckTarget1P125V); + PMU_EnableBodyBias(ANADIG_PMU, kPMU_FBB_CM7, (OCOTP->FUSEN[7].FUSE & BIT(4)) == 0); + const clock_arm_pll_config_t armpll = {.loopDivider = 166, .postDivider = 0}; + CLOCK_InitArmPll(&armpll); // Set clock to 996MHz + CCM->CLOCK_ROOT[0].CONTROL = CCM_CLOCK_ROOT_CONTROL_MUX(4); // /1 + + // rng_init(); // TRNG is part or CAAM and there is no info on that + // NXP startup code calls SystemInit BEFORE initializing RAM... + SysTick_Config(SYS_FREQUENCY / 1000); // Sys tick every 1ms +}