/* -------------------------------------------------------------------------- * Copyright (c) 2013-2022 Arm Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * -------------------------------------------------------------------------- * * $Revision: V10.4.0 * * Project: CMSIS-FreeRTOS * Title: FreeRTOS configuration definitions * * --------------------------------------------------------------------------*/ #ifndef FREERTOS_CONFIG_H #define FREERTOS_CONFIG_H /*----------------------------------------------------------- * Application specific definitions. * * These definitions should be adjusted for your particular hardware and * application requirements. * * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. * * See http://www.freertos.org/a00110.html *----------------------------------------------------------*/ #if (defined(__ARMCC_VERSION) || defined(__GNUC__) || defined(__ICCARM__)) #include #include "RTE_Components.h" #include CMSIS_device_header #endif //-------- <<< Use Configuration Wizard in Context Menu >>> -------------------- // Minimal stack size [words] <0-65535> // Stack for idle task and default task stack in words. // Default: 128 #define configMINIMAL_STACK_SIZE ((uint16_t)(256)) // Total heap size [bytes] <0-0xFFFFFFFF> // Heap memory size in bytes. // Default: 8192 #define configTOTAL_HEAP_SIZE ((size_t)65536) // Kernel tick frequency [Hz] <0-0xFFFFFFFF> // Kernel tick rate in Hz. // Default: 1000 #define configTICK_RATE_HZ ((TickType_t)1000) // Timer task stack depth [words] <0-65535> // Stack for timer task in words. // Default: 80 #define configTIMER_TASK_STACK_DEPTH 80 // Timer task priority <0-56> // Timer task priority. // Default: 40 (High) #define configTIMER_TASK_PRIORITY 40 // Timer queue length <0-1024> // Timer command queue length. // Default: 5 #define configTIMER_QUEUE_LENGTH 5 // Preemption interrupt priority // Maximum priority of interrupts that are safe to call FreeRTOS API. // Default: 16 #define configMAX_SYSCALL_INTERRUPT_PRIORITY 16 // Use time slicing // Enable setting to use timeslicing. // Default: 1 #define configUSE_TIME_SLICING 1 // Use tickless idle // Enable low power tickless mode to stop the periodic tick interrupt during idle periods or // disable it to keep the tick interrupt running at all times. // Default: 0 #define configUSE_TICKLESS_IDLE 0 // Idle should yield // Control Yield behaviour of the idle task. // Default: 1 #define configIDLE_SHOULD_YIELD 1 // Check for stack overflow // <0=>Disable <1=>Method one <2=>Method two // Enable or disable stack overflow checking. // Callback function vApplicationStackOverflowHook implementation is required when stack checking is enabled. // Default: 0 #define configCHECK_FOR_STACK_OVERFLOW 2 // Use idle hook // Enable callback function call on each idle task iteration. // Callback function vApplicationIdleHook implementation is required when idle hook is enabled. // Default: 0 #define configUSE_IDLE_HOOK 0 // Use tick hook // Enable callback function call during each tick interrupt. // Callback function vApplicationTickHook implementation is required when tick hook is enabled. // Default: 0 #define configUSE_TICK_HOOK 0 // Use deamon task startup hook // Enable callback function call when timer service starts. // Callback function vApplicationDaemonTaskStartupHook implementation is required when deamon task startup hook is enabled. // Default: 0 #define configUSE_DAEMON_TASK_STARTUP_HOOK 0 // Use malloc failed hook // Enable callback function call when out of dynamic memory. // Callback function vApplicationMallocFailedHook implementation is required when malloc failed hook is enabled. // Default: 0 #define configUSE_MALLOC_FAILED_HOOK 0 // Queue registry size // Define maximum number of queue objects registered for debug purposes. // The queue registry is used by kernel aware debuggers to locate queue and semaphore structures and display associated text names. // Default: 0 #define configQUEUE_REGISTRY_SIZE 0 // Event Recorder configuration // Initialize and setup Event Recorder level filtering. // Settings have no effect when Event Recorder is not present. // Initialize Event Recorder // Initialize Event Recorder before FreeRTOS kernel start. // Default: 1 #define configEVR_INITIALIZE 1 // Setup recording level filter // Enable configuration of FreeRTOS events recording level // Default: 1 #define configEVR_SETUP_LEVEL 1 // Tasks functions // Define event recording level bitmask for events generated from Tasks functions. // Default: 0x05 // <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All #define configEVR_LEVEL_TASKS 0x05 // Queue functions // Define event recording level bitmask for events generated from Queue functions. // Default: 0x05 // <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All #define configEVR_LEVEL_QUEUE 0x05 // Timer functions // Define event recording level bitmask for events generated from Timer functions. // Default: 0x05 // <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All #define configEVR_LEVEL_TIMERS 0x05 // Event Groups functions // Define event recording level bitmask for events generated from Event Groups functions. // Default: 0x05 // <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All #define configEVR_LEVEL_EVENTGROUPS 0x05 // Heap functions // Define event recording level bitmask for events generated from Heap functions. // Default: 0x05 // <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All #define configEVR_LEVEL_HEAP 0x05 // Stream Buffer functions // Define event recording level bitmask for events generated from Stream Buffer functions. // Default: 0x05 // <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All #define configEVR_LEVEL_STREAMBUFFER 0x05 // // // Port Specific Features // Enable and configure port specific features. // Check FreeRTOS documentation for definitions that apply for the used port. // Use Floating Point Unit // Using Floating Point Unit (FPU) affects context handling. // Enable FPU when application uses floating point operations. // Default: 1 #define configENABLE_FPU 1 // Use M-Profile Vector Extension // Using M-Profile Vector Extension (MVE) affects context handling. // Enable MVE when application uses signal processing and ML algorithms. // Default: 0 #define configENABLE_MVE 0 // Use Memory Protection Unit // Using Memory Protection Unit (MPU) requires detailed memory map definition. // This setting is only releavant for MPU enabled ports. // Default: 0 #define configENABLE_MPU 0 // Use TrustZone Secure Side Only // This settings prevents FreeRTOS contex switch to Non-Secure side. // Enable this setting when FreeRTOS runs on the Secure side only. #define configRUN_FREERTOS_SECURE_ONLY 0 // Use TrustZone Security Extension // Using TrustZone affects context handling. // Enable TrustZone when FreeRTOS runs on the Non-Secure side and calls functions from the Secure side. // Default: 1 #define configENABLE_TRUSTZONE 0 // Minimal secure stack size [words] <0-65535> // Stack for idle task Secure side context in words. // This setting is only relevant when TrustZone extension is enabled. // Default: 128 #define configMINIMAL_SECURE_STACK_SIZE ((uint32_t)128) // //------------- <<< end of configuration section >>> --------------------------- /* Defines needed by FreeRTOS to implement CMSIS RTOS2 API. Do not change! */ #define configCPU_CLOCK_HZ (SystemCoreClock) #define configSUPPORT_STATIC_ALLOCATION 1 #define configSUPPORT_DYNAMIC_ALLOCATION 1 #define configUSE_PREEMPTION 1 #define configUSE_TIMERS 1 #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 #define configUSE_TASK_NOTIFICATIONS 1 #define configUSE_TRACE_FACILITY 1 #define configUSE_16_BIT_TICKS 0 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 #define configMAX_PRIORITIES 56 #define configKERNEL_INTERRUPT_PRIORITY 255 /* Defines that include FreeRTOS functions which implement CMSIS RTOS2 API. Do not change! */ #define INCLUDE_xEventGroupSetBitsFromISR 1 #define INCLUDE_xSemaphoreGetMutexHolder 1 #define INCLUDE_vTaskDelay 1 #define INCLUDE_xTaskDelayUntil 1 #define INCLUDE_vTaskDelete 1 #define INCLUDE_xTaskGetCurrentTaskHandle 1 #define INCLUDE_xTaskGetSchedulerState 1 #define INCLUDE_uxTaskGetStackHighWaterMark 1 #define INCLUDE_uxTaskPriorityGet 1 #define INCLUDE_vTaskPrioritySet 1 #define INCLUDE_eTaskGetState 1 #define INCLUDE_vTaskSuspend 1 #define INCLUDE_xTimerPendFunctionCall 1 /* Map the FreeRTOS port interrupt handlers to their CMSIS standard names. */ #define xPortPendSVHandler PendSV_Handler #define vPortSVCHandler SVC_Handler /* Ensure Cortex-M port compatibility. */ #define SysTick_Handler xPortSysTickHandler #if (defined(__ARMCC_VERSION) || defined(__GNUC__) || defined(__ICCARM__)) /* Include debug event definitions */ #include "freertos_evr.h" #endif #endif /* FREERTOS_CONFIG_H */