/* * Copyright (c) 2015-2016, Freescale Semiconductor, Inc. * Copyright 2016-2022 NXP * All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef _FSL_COMMON_H_ #define _FSL_COMMON_H_ #include #include #include #include #include #if defined(__ICCARM__) || (defined(__CC_ARM) || defined(__ARMCC_VERSION)) || defined(__GNUC__) #include #endif #include "fsl_device_registers.h" /*! * @addtogroup ksdk_common * @{ */ /******************************************************************************* * Configurations ******************************************************************************/ /*! @brief Macro to use the default weak IRQ handler in drivers. */ #ifndef FSL_DRIVER_TRANSFER_DOUBLE_WEAK_IRQ #define FSL_DRIVER_TRANSFER_DOUBLE_WEAK_IRQ 1 #endif /******************************************************************************* * Definitions ******************************************************************************/ /*! @brief Construct a status code value from a group and code number. */ #define MAKE_STATUS(group, code) ((((group)*100L) + (code))) /*! @brief Construct the version number for drivers. * * The driver version is a 32-bit number, for both 32-bit platforms(such as Cortex M) * and 16-bit platforms(such as DSC). * * @verbatim | Unused || Major Version || Minor Version || Bug Fix | 31 25 24 17 16 9 8 0 @endverbatim */ #define MAKE_VERSION(major, minor, bugfix) (((major)*65536L) + ((minor)*256L) + (bugfix)) /*! @name Driver version */ /*@{*/ /*! @brief common driver version. */ #define FSL_COMMON_DRIVER_VERSION (MAKE_VERSION(2, 4, 0)) /*@}*/ /* Debug console type definition. */ #define DEBUG_CONSOLE_DEVICE_TYPE_NONE 0U /*!< No debug console. */ #define DEBUG_CONSOLE_DEVICE_TYPE_UART 1U /*!< Debug console based on UART. */ #define DEBUG_CONSOLE_DEVICE_TYPE_LPUART 2U /*!< Debug console based on LPUART. */ #define DEBUG_CONSOLE_DEVICE_TYPE_LPSCI 3U /*!< Debug console based on LPSCI. */ #define DEBUG_CONSOLE_DEVICE_TYPE_USBCDC 4U /*!< Debug console based on USBCDC. */ #define DEBUG_CONSOLE_DEVICE_TYPE_FLEXCOMM 5U /*!< Debug console based on FLEXCOMM. */ #define DEBUG_CONSOLE_DEVICE_TYPE_IUART 6U /*!< Debug console based on i.MX UART. */ #define DEBUG_CONSOLE_DEVICE_TYPE_VUSART 7U /*!< Debug console based on LPC_VUSART. */ #define DEBUG_CONSOLE_DEVICE_TYPE_MINI_USART 8U /*!< Debug console based on LPC_USART. */ #define DEBUG_CONSOLE_DEVICE_TYPE_SWO 9U /*!< Debug console based on SWO. */ #define DEBUG_CONSOLE_DEVICE_TYPE_QSCI 10U /*!< Debug console based on QSCI. */ /*! @brief Status group numbers. */ enum _status_groups { kStatusGroup_Generic = 0, /*!< Group number for generic status codes. */ kStatusGroup_FLASH = 1, /*!< Group number for FLASH status codes. */ kStatusGroup_LPSPI = 4, /*!< Group number for LPSPI status codes. */ kStatusGroup_FLEXIO_SPI = 5, /*!< Group number for FLEXIO SPI status codes. */ kStatusGroup_DSPI = 6, /*!< Group number for DSPI status codes. */ kStatusGroup_FLEXIO_UART = 7, /*!< Group number for FLEXIO UART status codes. */ kStatusGroup_FLEXIO_I2C = 8, /*!< Group number for FLEXIO I2C status codes. */ kStatusGroup_LPI2C = 9, /*!< Group number for LPI2C status codes. */ kStatusGroup_UART = 10, /*!< Group number for UART status codes. */ kStatusGroup_I2C = 11, /*!< Group number for UART status codes. */ kStatusGroup_LPSCI = 12, /*!< Group number for LPSCI status codes. */ kStatusGroup_LPUART = 13, /*!< Group number for LPUART status codes. */ kStatusGroup_SPI = 14, /*!< Group number for SPI status code.*/ kStatusGroup_XRDC = 15, /*!< Group number for XRDC status code.*/ kStatusGroup_SEMA42 = 16, /*!< Group number for SEMA42 status code.*/ kStatusGroup_SDHC = 17, /*!< Group number for SDHC status code */ kStatusGroup_SDMMC = 18, /*!< Group number for SDMMC status code */ kStatusGroup_SAI = 19, /*!< Group number for SAI status code */ kStatusGroup_MCG = 20, /*!< Group number for MCG status codes. */ kStatusGroup_SCG = 21, /*!< Group number for SCG status codes. */ kStatusGroup_SDSPI = 22, /*!< Group number for SDSPI status codes. */ kStatusGroup_FLEXIO_I2S = 23, /*!< Group number for FLEXIO I2S status codes */ kStatusGroup_FLEXIO_MCULCD = 24, /*!< Group number for FLEXIO LCD status codes */ kStatusGroup_FLASHIAP = 25, /*!< Group number for FLASHIAP status codes */ kStatusGroup_FLEXCOMM_I2C = 26, /*!< Group number for FLEXCOMM I2C status codes */ kStatusGroup_I2S = 27, /*!< Group number for I2S status codes */ kStatusGroup_IUART = 28, /*!< Group number for IUART status codes */ kStatusGroup_CSI = 29, /*!< Group number for CSI status codes */ kStatusGroup_MIPI_DSI = 30, /*!< Group number for MIPI DSI status codes */ kStatusGroup_SDRAMC = 35, /*!< Group number for SDRAMC status codes. */ kStatusGroup_POWER = 39, /*!< Group number for POWER status codes. */ kStatusGroup_ENET = 40, /*!< Group number for ENET status codes. */ kStatusGroup_PHY = 41, /*!< Group number for PHY status codes. */ kStatusGroup_TRGMUX = 42, /*!< Group number for TRGMUX status codes. */ kStatusGroup_SMARTCARD = 43, /*!< Group number for SMARTCARD status codes. */ kStatusGroup_LMEM = 44, /*!< Group number for LMEM status codes. */ kStatusGroup_QSPI = 45, /*!< Group number for QSPI status codes. */ kStatusGroup_DMA = 50, /*!< Group number for DMA status codes. */ kStatusGroup_EDMA = 51, /*!< Group number for EDMA status codes. */ kStatusGroup_DMAMGR = 52, /*!< Group number for DMAMGR status codes. */ kStatusGroup_FLEXCAN = 53, /*!< Group number for FlexCAN status codes. */ kStatusGroup_LTC = 54, /*!< Group number for LTC status codes. */ kStatusGroup_FLEXIO_CAMERA = 55, /*!< Group number for FLEXIO CAMERA status codes. */ kStatusGroup_LPC_SPI = 56, /*!< Group number for LPC_SPI status codes. */ kStatusGroup_LPC_USART = 57, /*!< Group number for LPC_USART status codes. */ kStatusGroup_DMIC = 58, /*!< Group number for DMIC status codes. */ kStatusGroup_SDIF = 59, /*!< Group number for SDIF status codes.*/ kStatusGroup_SPIFI = 60, /*!< Group number for SPIFI status codes. */ kStatusGroup_OTP = 61, /*!< Group number for OTP status codes. */ kStatusGroup_MCAN = 62, /*!< Group number for MCAN status codes. */ kStatusGroup_CAAM = 63, /*!< Group number for CAAM status codes. */ kStatusGroup_ECSPI = 64, /*!< Group number for ECSPI status codes. */ kStatusGroup_USDHC = 65, /*!< Group number for USDHC status codes.*/ kStatusGroup_LPC_I2C = 66, /*!< Group number for LPC_I2C status codes.*/ kStatusGroup_DCP = 67, /*!< Group number for DCP status codes.*/ kStatusGroup_MSCAN = 68, /*!< Group number for MSCAN status codes.*/ kStatusGroup_ESAI = 69, /*!< Group number for ESAI status codes. */ kStatusGroup_FLEXSPI = 70, /*!< Group number for FLEXSPI status codes. */ kStatusGroup_MMDC = 71, /*!< Group number for MMDC status codes. */ kStatusGroup_PDM = 72, /*!< Group number for MIC status codes. */ kStatusGroup_SDMA = 73, /*!< Group number for SDMA status codes. */ kStatusGroup_ICS = 74, /*!< Group number for ICS status codes. */ kStatusGroup_SPDIF = 75, /*!< Group number for SPDIF status codes. */ kStatusGroup_LPC_MINISPI = 76, /*!< Group number for LPC_MINISPI status codes. */ kStatusGroup_HASHCRYPT = 77, /*!< Group number for Hashcrypt status codes */ kStatusGroup_LPC_SPI_SSP = 78, /*!< Group number for LPC_SPI_SSP status codes. */ kStatusGroup_I3C = 79, /*!< Group number for I3C status codes */ kStatusGroup_LPC_I2C_1 = 97, /*!< Group number for LPC_I2C_1 status codes. */ kStatusGroup_NOTIFIER = 98, /*!< Group number for NOTIFIER status codes. */ kStatusGroup_DebugConsole = 99, /*!< Group number for debug console status codes. */ kStatusGroup_SEMC = 100, /*!< Group number for SEMC status codes. */ kStatusGroup_ApplicationRangeStart = 101, /*!< Starting number for application groups. */ kStatusGroup_IAP = 102, /*!< Group number for IAP status codes */ kStatusGroup_SFA = 103, /*!< Group number for SFA status codes*/ kStatusGroup_SPC = 104, /*!< Group number for SPC status codes. */ kStatusGroup_PUF = 105, /*!< Group number for PUF status codes. */ kStatusGroup_TOUCH_PANEL = 106, /*!< Group number for touch panel status codes */ kStatusGroup_VBAT = 107, /*!< Group number for VBAT status codes */ kStatusGroup_HAL_GPIO = 121, /*!< Group number for HAL GPIO status codes. */ kStatusGroup_HAL_UART = 122, /*!< Group number for HAL UART status codes. */ kStatusGroup_HAL_TIMER = 123, /*!< Group number for HAL TIMER status codes. */ kStatusGroup_HAL_SPI = 124, /*!< Group number for HAL SPI status codes. */ kStatusGroup_HAL_I2C = 125, /*!< Group number for HAL I2C status codes. */ kStatusGroup_HAL_FLASH = 126, /*!< Group number for HAL FLASH status codes. */ kStatusGroup_HAL_PWM = 127, /*!< Group number for HAL PWM status codes. */ kStatusGroup_HAL_RNG = 128, /*!< Group number for HAL RNG status codes. */ kStatusGroup_HAL_I2S = 129, /*!< Group number for HAL I2S status codes. */ kStatusGroup_HAL_ADC_SENSOR = 130, /*!< Group number for HAL ADC SENSOR status codes. */ kStatusGroup_TIMERMANAGER = 135, /*!< Group number for TiMER MANAGER status codes. */ kStatusGroup_SERIALMANAGER = 136, /*!< Group number for SERIAL MANAGER status codes. */ kStatusGroup_LED = 137, /*!< Group number for LED status codes. */ kStatusGroup_BUTTON = 138, /*!< Group number for BUTTON status codes. */ kStatusGroup_EXTERN_EEPROM = 139, /*!< Group number for EXTERN EEPROM status codes. */ kStatusGroup_SHELL = 140, /*!< Group number for SHELL status codes. */ kStatusGroup_MEM_MANAGER = 141, /*!< Group number for MEM MANAGER status codes. */ kStatusGroup_LIST = 142, /*!< Group number for List status codes. */ kStatusGroup_OSA = 143, /*!< Group number for OSA status codes. */ kStatusGroup_COMMON_TASK = 144, /*!< Group number for Common task status codes. */ kStatusGroup_MSG = 145, /*!< Group number for messaging status codes. */ kStatusGroup_SDK_OCOTP = 146, /*!< Group number for OCOTP status codes. */ kStatusGroup_SDK_FLEXSPINOR = 147, /*!< Group number for FLEXSPINOR status codes.*/ kStatusGroup_CODEC = 148, /*!< Group number for codec status codes. */ kStatusGroup_ASRC = 149, /*!< Group number for codec status ASRC. */ kStatusGroup_OTFAD = 150, /*!< Group number for codec status codes. */ kStatusGroup_SDIOSLV = 151, /*!< Group number for SDIOSLV status codes. */ kStatusGroup_MECC = 152, /*!< Group number for MECC status codes. */ kStatusGroup_ENET_QOS = 153, /*!< Group number for ENET_QOS status codes. */ kStatusGroup_LOG = 154, /*!< Group number for LOG status codes. */ kStatusGroup_I3CBUS = 155, /*!< Group number for I3CBUS status codes. */ kStatusGroup_QSCI = 156, /*!< Group number for QSCI status codes. */ kStatusGroup_SNT = 157, /*!< Group number for SNT status codes. */ kStatusGroup_QUEUEDSPI = 158, /*!< Group number for QSPI status codes. */ kStatusGroup_POWER_MANAGER = 159, /*!< Group number for POWER_MANAGER status codes. */ kStatusGroup_IPED = 160, /*!< Group number for IPED status codes. */ kStatusGroup_ELS_PKC = 161, /*!< Group number for ELS PKC status codes. */ kStatusGroup_CSS_PKC = 162, /*!< Group number for CSS PKC status codes. */ kStatusGroup_HOSTIF = 163, /*!< Group number for HOSTIF status codes. */ kStatusGroup_CLIF = 164, /*!< Group number for CLIF status codes. */ kStatusGroup_BMA = 165, /*!< Group number for BMA status codes. */ kStatusGroup_NETC = 166, /*!< Group number for NETC status codes. */ }; /*! \public * @brief Generic status return codes. */ enum { kStatus_Success = MAKE_STATUS(kStatusGroup_Generic, 0), /*!< Generic status for Success. */ kStatus_Fail = MAKE_STATUS(kStatusGroup_Generic, 1), /*!< Generic status for Fail. */ kStatus_ReadOnly = MAKE_STATUS(kStatusGroup_Generic, 2), /*!< Generic status for read only failure. */ kStatus_OutOfRange = MAKE_STATUS(kStatusGroup_Generic, 3), /*!< Generic status for out of range access. */ kStatus_InvalidArgument = MAKE_STATUS(kStatusGroup_Generic, 4), /*!< Generic status for invalid argument check. */ kStatus_Timeout = MAKE_STATUS(kStatusGroup_Generic, 5), /*!< Generic status for timeout. */ kStatus_NoTransferInProgress = MAKE_STATUS(kStatusGroup_Generic, 6), /*!< Generic status for no transfer in progress. */ kStatus_Busy = MAKE_STATUS(kStatusGroup_Generic, 7), /*!< Generic status for module is busy. */ kStatus_NoData = MAKE_STATUS(kStatusGroup_Generic, 8), /*!< Generic status for no data is found for the operation. */ }; /*! @brief Type used for all status and error return values. */ typedef int32_t status_t; /*! * @name Min/max macros * @{ */ #if !defined(MIN) #define MIN(a, b) (((a) < (b)) ? (a) : (b)) #endif #if !defined(MAX) #define MAX(a, b) (((a) > (b)) ? (a) : (b)) #endif /* @} */ /*! @brief Computes the number of elements in an array. */ #if !defined(ARRAY_SIZE) #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) #endif /*! @name UINT16_MAX/UINT32_MAX value */ /* @{ */ #if !defined(UINT16_MAX) #define UINT16_MAX ((uint16_t)-1) #endif #if !defined(UINT32_MAX) #define UINT32_MAX ((uint32_t)-1) #endif /* @} */ /*! @name Suppress fallthrough warning macro */ /* For switch case code block, if case section ends without "break;" statement, there wil be fallthrough warning with compiler flag -Wextra or -Wimplicit-fallthrough=n when using armgcc. To suppress this warning, "SUPPRESS_FALL_THROUGH_WARNING();" need to be added at the end of each case section which misses "break;"statement. */ /* @{ */ #if defined(__GNUC__) && !defined(__ARMCC_VERSION) #define SUPPRESS_FALL_THROUGH_WARNING() __attribute__((fallthrough)) #else #define SUPPRESS_FALL_THROUGH_WARNING() #endif /* @} */ /******************************************************************************* * API ******************************************************************************/ #if defined(__cplusplus) extern "C" { #endif #if !((defined(__DSC__) && defined(__CW__))) /*! * @brief Allocate memory with given alignment and aligned size. * * This is provided to support the dynamically allocated memory * used in cache-able region. * @param size The length required to malloc. * @param alignbytes The alignment size. * @retval The allocated memory. */ void *SDK_Malloc(size_t size, size_t alignbytes); /*! * @brief Free memory. * * @param ptr The memory to be release. */ void SDK_Free(void *ptr); #endif /*! * @brief Delay at least for some time. * Please note that, this API uses while loop for delay, different run-time environments make the time not precise, * if precise delay count was needed, please implement a new delay function with hardware timer. * * @param delayTime_us Delay time in unit of microsecond. * @param coreClock_Hz Core clock frequency with Hz. */ void SDK_DelayAtLeastUs(uint32_t delayTime_us, uint32_t coreClock_Hz); #if defined(__cplusplus) } #endif /*! @} */ #if (defined(__DSC__) && defined(__CW__)) #include "fsl_common_dsc.h" #elif defined(__XTENSA__) #include "fsl_common_dsp.h" #else #include "fsl_common_arm.h" #endif #endif /* _FSL_COMMON_H_ */