// Copyright (c) 2022-2023 Cesanta Software Limited // All rights reserved #include "hal.h" #include "mongoose.h" #include "tusb.h" #define LED1 PIN('N', 1) // On-board LED pin #define LED2 PIN('N', 0) // On-board LED pin #define LED3 PIN('F', 4) // On-board LED pin #define LED4 PIN('F', 0) // On-board LED pin static struct mg_tcpip_if *s_ifp; const uint8_t tud_network_mac_address[6] = {2, 2, 0x84, 0x6A, 0x96, 0}; static void blink_cb(void *arg) { // Blink periodically gpio_toggle(LED1); (void) arg; } static volatile uint64_t s_ticks; // Milliseconds since boot void SysTick_Handler(void) { // SyStick IRQ handler, triggered every 1ms s_ticks++; } uint64_t mg_millis(void) { // Let Mongoose use our uptime function return s_ticks; // Return number of milliseconds since boot } bool tud_network_recv_cb(const uint8_t *buf, uint16_t len) { mg_tcpip_qwrite((void *) buf, len, s_ifp); // MG_INFO(("RECV %hu", len)); // mg_hexdump(buf, len); tud_network_recv_renew(); return true; } void tud_network_init_cb(void) { } void USB0_Handler(void) { // USB interrupt handler tud_int_handler(0); // Pass control to TinyUSB } uint16_t tud_network_xmit_cb(uint8_t *dst, void *ref, uint16_t arg) { // MG_INFO(("SEND %hu", arg)); memcpy(dst, ref, arg); return arg; } static size_t usb_tx(const void *buf, size_t len, struct mg_tcpip_if *ifp) { if (!tud_ready()) return 0; while (!tud_network_can_xmit(len)) tud_task(); tud_network_xmit((void *) buf, len); (void) ifp; return len; } static bool usb_up(struct mg_tcpip_if *ifp) { (void) ifp; return tud_inited() && tud_ready() && tud_connected(); } static void fn(struct mg_connection *c, int ev, void *ev_data) { if (ev == MG_EV_HTTP_MSG) { struct mg_http_message *hm = (struct mg_http_message *) ev_data; if (mg_http_match_uri(hm, "/api/debug")) { int level = mg_json_get_long(hm->body, "$.level", MG_LL_DEBUG); mg_log_set(level); mg_http_reply(c, 200, "", "Debug level set to %d\n", level); } else { mg_http_reply(c, 200, "", "hi\n"); } } } int main(void) { gpio_output(LED1); // Setup blue LED uart_init(UART_DEBUG, 115200); // Initialise debug printf struct mg_mgr mgr; // Initialise mg_mgr_init(&mgr); // Mongoose event manager mg_log_set(MG_LL_DEBUG); // Set log level MG_INFO(("Init TCP/IP stack ...")); struct mg_tcpip_driver driver = {.tx = usb_tx, .up = usb_up}; struct mg_tcpip_if mif = {.mac = {2, 0, 1, 2, 3, 0x77}, .ip = mg_htonl(MG_U32(192, 168, 3, 1)), .mask = mg_htonl(MG_U32(255, 255, 255, 0)), .enable_dhcp_server = true, .driver = &driver, .recv_queue.size = 4096}; s_ifp = &mif; mg_tcpip_init(&mgr, &mif); mg_timer_add(&mgr, 500, MG_TIMER_REPEAT, blink_cb, &mgr); mg_http_listen(&mgr, "tcp://0.0.0.0:80", fn, &mgr); MG_INFO(("Init USB ...")); gpio_init(PIN('L', 6), GPIO_MODE_ANALOG, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE, 0); // D_P gpio_init(PIN('L', 7), GPIO_MODE_ANALOG, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE, 0); // D_N gpio_init(PIN('B', 1), GPIO_MODE_ANALOG, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE, 0); // VBUS gpio_init(PIN('B', 0), GPIO_MODE_ANALOG, GPIO_OTYPE_PUSH_PULL, GPIO_SPEED_HIGH, GPIO_PULL_NONE, 0); // ID SYSCTL->RCGCUSB |= BIT(0); // Enable USB clock SYSCTL->SRUSB |= BIT(0); // Reset peripheral SYSCTL->SRUSB &= ~BIT(0); USB0->CC = 0x207; // Enable clock and configure divisor for 60MHz clock USB0->GPCS = 3; USB0->LPMCNTRL &= ~BIT(0); USB0->LPMCNTRL = 0; MG_INFO(("USB Controller version %d", 1 + (USB0->PP & 0xF))); MG_INFO(("IS: %x", USB0->IS)); if (USB0->EPCISC & BIT(0)) // check PF flag, USB0->EPCISC |= BIT(0); // clear PF interrupt if so tusb_init(); MG_INFO(("Init done, starting main loop ...")); for (;;) { mg_mgr_poll(&mgr, 0); tud_task(); } return 0; }