TARGET  = firmware
CFLAGS  ?=  -W -Wall -Wextra -Werror -Wundef -Wshadow -Wdouble-promotion \
            -Wformat-truncation -fno-common -Wconversion \
            -g3 -Os -ffunction-sections -fdata-sections -I. \
            -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-sp-d16 $(EXTRA_CFLAGS)
LDFLAGS ?= -Tlink.ld -nostartfiles -nostdlib --specs nano.specs -lc -lgcc -Wl,--gc-sections -Wl,-Map=$@.map
SOURCES = boot.c main.c syscalls.c

# Add Mongoose-specific flags and source files
CFLAGS  += -I../../.. -DMG_ARCH=MG_ARCH_NEWLIB -DMG_ENABLE_CUSTOM_MILLIS=1 -DMG_ENABLE_MIP=1 -DMG_ENABLE_PACKED_FS=1
SOURCES += ../../../mongoose.c ../../device-dashboard/net.c ../../device-dashboard/packed_fs.c

all build example: $(TARGET).bin

$(TARGET).bin: $(TARGET).elf
	arm-none-eabi-objcopy -O binary $< $@

$(TARGET).elf: $(SOURCES) mcu.h
	arm-none-eabi-gcc $(SOURCES) $(CFLAGS) $(LDFLAGS) -o $@

# Note: on "unknown chip id" flash error, wire BOOT0 to VDD and st-flash erase
flash: $(TARGET).bin
	st-flash --reset write $(TARGET).bin 0x8000000

# Requires env variable VCON_API_KEY set
DEVICE_URL ?= https://dash.vcon.io/api/v3/devices/5
test:	EXTRA_CFLAGS += -DUART_DEBUG=UART1
test:	update
	curl --fail -su :$(VCON_API_KEY) $(DEVICE_URL)/tx?t=5 | tee /tmp/output.txt
	grep 'READY, IP:' /tmp/output.txt
	grep 'MQTT connected' /tmp/output.txt

update: $(TARGET).bin
	curl --fail-with-body -su :$(VCON_API_KEY) $(DEVICE_URL)/ota --data-binary @$<

clean:
	@rm -rf $(TARGET).* *.su