// Copyright (c) 2023 Cesanta Software Limited // All rights reserved #include "hal.h" #include "mongoose.h" #include "net.h" #define BLINK_PERIOD_MS 1000 // LED blinking period in millis static volatile uint64_t s_ticks; // Milliseconds since boot void SysTick_Handler(void) { // SyStick IRQ handler, triggered every 1ms s_ticks++; } uint64_t mg_millis(void) { // Let Mongoose use our uptime function return s_ticks; // Return number of milliseconds since boot } void mg_random(void *buf, size_t len) { // Use on-board RNG for (size_t n = 0; n < len; n += sizeof(uint32_t)) { uint32_t r = rng_read(); memcpy((char *) buf + n, &r, n + sizeof(r) > len ? len - n : sizeof(r)); } } static void timer_fn(void *arg) { gpio_toggle(LED); // Blink LED struct mg_tcpip_if *ifp = arg; // And show const char *names[] = {"down", "up", "ready"}; // network stats MG_INFO(("Ethernet: %s, IP: %M, rx:%u, tx:%u, dr:%u, er:%u", names[ifp->state], mg_print_ip4, &ifp->ip, ifp->nrecv, ifp->nsent, ifp->ndrop, ifp->nerr)); } int main(void) { gpio_output(LED); // Setup green LED uart_init(UART_DEBUG, 115200); // Initialise debug printf ethernet_init(); // Initialise ethernet pins MG_INFO(("Chip revision: %c, max cpu clock: %u MHz", chiprev(), (chiprev() == 'V') ? 480 : 400)); MG_INFO(("Starting, CPU freq %g MHz", (double) SystemCoreClock / 1000000)); struct mg_mgr mgr; // Initialise mg_mgr_init(&mgr); // Mongoose event manager mg_log_set(MG_LL_DEBUG); // Set log level // Initialise Mongoose network stack // Specify MAC address, and IP/mask/GW in network byte order for static // IP configuration. If IP/mask/GW are unset, DHCP is going to be used struct mg_tcpip_driver_stm32h_data driver_data = {.mdc_cr = 4}; struct mg_tcpip_if mif = {.mac = GENERATE_LOCALLY_ADMINISTERED_MAC(), .driver = &mg_tcpip_driver_stm32h, .driver_data = &driver_data}; mg_tcpip_init(&mgr, &mif); mg_timer_add(&mgr, BLINK_PERIOD_MS, MG_TIMER_REPEAT, timer_fn, &mif); MG_INFO(("MAC: %M. Waiting for IP...", mg_print_mac, mif.mac)); while (mif.state != MG_TCPIP_STATE_READY) { mg_mgr_poll(&mgr, 0); } MG_INFO(("Initialising application...")); web_init(&mgr); MG_INFO(("Starting event loop")); for (;;) { mg_mgr_poll(&mgr, 0); } return 0; }