/* clang-format off */ //***************************************************************************** // // lwipopts.h - Configuration file for lwIP // // Copyright (c) 2013-2016 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Texas Instruments (TI) is supplying this software for use solely and // exclusively on TI's microcontroller products. The software is owned by // TI and/or its suppliers, and is protected under applicable copyright // laws. You may not combine this software with "viral" open-source // software in order to form a larger program. // // THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. // NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT // NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL // DAMAGES, FOR ANY REASON WHATSOEVER. // // This is part of revision 2.1.3.156 of the EK-TM4C129EXL Firmware Package. // //***************************************************************************** // // NOTE: This file has been derived from the lwIP/src/include/lwip/opt.h // header file. // // For additional details, refer to the original "opt.h" file, and lwIP // documentation. // //***************************************************************************** #ifndef __LWIPOPTS_H__ #define __LWIPOPTS_H__ //***************************************************************************** // // ---------- Stellaris / lwIP Port Options ---------- // //***************************************************************************** #define HOST_TMR_INTERVAL 100 // default is 0 //#define DHCP_EXPIRE_TIMER_MSECS (60 * 1000) //#define LWIP_HTTPD_SSI 1 //#define LWIP_HTTPD_CGI 1 #define LWIP_HTTPD_DYNAMIC_HEADERS 1 //#define HTTPD_DEBUG LWIP_DBG_ON #define EMAC_PHY_CONFIG (EMAC_PHY_TYPE_INTERNAL | EMAC_PHY_INT_MDIX_EN | \ EMAC_PHY_AN_100B_T_FULL_DUPLEX) #define PHY_PHYS_ADDR 0 #define NUM_TX_DESCRIPTORS 24 #define NUM_RX_DESCRIPTORS 8 //***************************************************************************** // // ---------- Platform specific locking ---------- // //***************************************************************************** #define SYS_LIGHTWEIGHT_PROT 1 // default is 0 #define NO_SYS 1 // default is 0 //#define MEMCPY(dst,src,len) memcpy(dst,src,len) //#define SMEMCPY(dst,src,len) memcpy(dst,src,len) //***************************************************************************** // // ---------- Memory options ---------- // //***************************************************************************** //#define MEM_LIBC_MALLOC 0 #define MEM_ALIGNMENT 4 #define MEM_SIZE (64 * 1024) //#define MEMP_OVERFLOW_CHECK 0 //#define MEMP_SANITY_CHECK 0 //#define MEM_USE_POOLS 0 //#define MEMP_USE_CUSTOM_POOLS 0 //***************************************************************************** // // ---------- Internal Memory Pool Sizes ---------- // //***************************************************************************** #define MEMP_NUM_PBUF 48 // Default 16 //#define MEMP_NUM_RAW_PCB 4 //#define MEMP_NUM_UDP_PCB 4 #define MEMP_NUM_TCP_PCB 16 // Default 5 //#define MEMP_NUM_TCP_PCB_LISTEN 8 //#define MEMP_NUM_TCP_SEG 16 //#define MEMP_NUM_REASSDATA 5 //#define MEMP_NUM_ARP_QUEUE 30 //#define MEMP_NUM_IGMP_GROUP 8 #define MEMP_NUM_SYS_TIMEOUT 8 //#define MEMP_NUM_NETBUF 2 //#define MEMP_NUM_NETCONN 4 //#define MEMP_NUM_TCPIP_MSG_API 8 //#define MEMP_NUM_TCPIP_MSG_INPKT 8 #define PBUF_POOL_SIZE 48 // Default 16 //***************************************************************************** // // ---------- ARP options ---------- // //***************************************************************************** //#define LWIP_ARP 1 //#define ARP_TABLE_SIZE 10 //#define ARP_QUEUEING 1 //#define ETHARP_TRUST_IP_MAC 1 //***************************************************************************** // // ---------- IP options ---------- // //***************************************************************************** //#define IP_FORWARD 0 //#define IP_OPTIONS_ALLOWED 1 #define IP_REASSEMBLY 0 // default is 1 #define IP_FRAG 0 // default is 1 //#define IP_REASS_MAXAGE 3 //#define IP_REASS_MAX_PBUFS 10 //#define IP_FRAG_USES_STATIC_BUF 1 //#define IP_FRAG_MAX_MTU 1500 //#define IP_DEFAULT_TTL 255 //***************************************************************************** // // ---------- ICMP options ---------- // //***************************************************************************** //#define LWIP_ICMP 1 //#define ICMP_TTL (IP_DEFAULT_TTL) //***************************************************************************** // // ---------- RAW options ---------- // //***************************************************************************** //#define LWIP_RAW 1 //#define RAW_TTL (IP_DEFAULT_TTL) //***************************************************************************** // // ---------- DHCP options ---------- // //***************************************************************************** #define LWIP_DHCP 1 // default is 0 //#define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP)) //***************************************************************************** // // ---------- UPNP options ---------- // //***************************************************************************** //#define LWIP_UPNP 0 //***************************************************************************** // // ---------- PTPD options ---------- // //***************************************************************************** //#define LWIP_PTPD 0 //***************************************************************************** // // ---------- AUTOIP options ---------- // //***************************************************************************** #define LWIP_AUTOIP 1 // default is 0 #define LWIP_DHCP_AUTOIP_COOP ((LWIP_DHCP) && (LWIP_AUTOIP)) // default is 0 #define LWIP_DHCP_AUTOIP_COOP_TRIES 5 // default is 9 //***************************************************************************** // // ---------- SNMP options ---------- // //***************************************************************************** //#define LWIP_SNMP 0 //#define SNMP_CONCURRENT_REQUESTS 1 //#define SNMP_TRAP_DESTINATIONS 1 //#define SNMP_PRIVATE_MIB 0 //#define SNMP_SAFE_REQUESTS 1 //***************************************************************************** // // ---------- IGMP options ---------- // //***************************************************************************** //#define LWIP_IGMP 0 //***************************************************************************** // // ---------- DNS options ----------- // //***************************************************************************** //#define LWIP_DNS 0 //#define DNS_TABLE_SIZE 4 //#define DNS_MAX_NAME_LENGTH 256 //#define DNS_MAX_SERVERS 2 //#define DNS_DOES_NAME_CHECK 1 //#define DNS_USES_STATIC_BUF 1 //#define DNS_MSG_SIZE 512 //***************************************************************************** // // ---------- UDP options ---------- // //***************************************************************************** //#define LWIP_UDP 1 //#define LWIP_UDPLITE 0 //#define UDP_TTL (IP_DEFAULT_TTL) //***************************************************************************** // // ---------- TCP options ---------- // //***************************************************************************** #define LWIP_TCP 1 //#define TCP_TTL (IP_DEFAULT_TTL) #define TCP_WND 4096 // default is 2048 //#define TCP_MAXRTX 12 //#define TCP_SYNMAXRTX 6 //#define TCP_QUEUE_OOSEQ 1 #define TCP_MSS 1500 // default is 128 //#define TCP_CALCULATE_EFF_SEND_MSS 1 #define TCP_SND_BUF (4 * TCP_MSS) // default is 256, was 6 * //#define TCP_SND_QUEUELEN (4 * (TCP_SND_BUF/TCP_MSS)) //#define TCP_SNDLOWAT (TCP_SND_BUF/2) //#define TCP_LISTEN_BACKLOG 0 //#define TCP_DEFAULT_LISTEN_BACKLOG 0xff //***************************************************************************** // // ---------- API options ---------- // //***************************************************************************** //#define LWIP_EVENT_API 0 //#define LWIP_CALLBACK_API 1 //***************************************************************************** // // ---------- Pbuf options ---------- // //***************************************************************************** #define PBUF_LINK_HLEN 16 // default is 14 #define PBUF_POOL_BUFSIZE 512 // PBUF_POOL_BUFSIZE default is // LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN) #define ETH_PAD_SIZE 0 // default is 0 //***************************************************************************** // // ---------- Network Interfaces options ---------- // //***************************************************************************** //#define LWIP_NETIF_HOSTNAME 0 //#define LWIP_NETIF_API 0 //#define LWIP_NETIF_STATUS_CALLBACK 0 //#define LWIP_NETIF_LINK_CALLBACK 0 //#define LWIP_NETIF_HWADDRHINT 0 //***************************************************************************** // // ---------- LOOPIF options ---------- // //***************************************************************************** //#define LWIP_HAVE_LOOPIF 0 //#define LWIP_LOOPIF_MULTITHREADING 1 //***************************************************************************** // // ---------- Thread options ---------- // //***************************************************************************** //#define TCPIP_THREAD_NAME "tcpip_thread" //#define TCPIP_THREAD_STACKSIZE 0 //#define TCPIP_THREAD_PRIO 1 //#define TCPIP_MBOX_SIZE 0 //#define SLIPIF_THREAD_NAME "slipif_loop" //#define SLIPIF_THREAD_STACKSIZE 0 //#define SLIPIF_THREAD_PRIO 1 //#define PPP_THREAD_NAME "pppMain" //#define PPP_THREAD_STACKSIZE 0 //#define PPP_THREAD_PRIO 1 //#define DEFAULT_THREAD_NAME "lwIP" //#define DEFAULT_THREAD_STACKSIZE 0 //#define DEFAULT_THREAD_PRIO 1 //#define DEFAULT_RAW_RECVMBOX_SIZE 0 //#define DEFAULT_UDP_RECVMBOX_SIZE 0 //#define DEFAULT_TCP_RECVMBOX_SIZE 0 //#define DEFAULT_ACCEPTMBOX_SIZE 0 //***************************************************************************** // // ---------- Sequential layer options ---------- // //***************************************************************************** //#define LWIP_TCPIP_CORE_LOCKING 0 #define LWIP_NETCONN 0 // default is 1 //***************************************************************************** // // ---------- Socket Options ---------- // //***************************************************************************** #define LWIP_SOCKET 0 // default is 1 //#define LWIP_COMPAT_SOCKETS 1 //#define LWIP_POSIX_SOCKETS_IO_NAMES 1 #define LWIP_TCP_KEEPALIVE 1 //#define LWIP_SO_RCVTIMEO 0 //#define LWIP_SO_RCVBUF 0 //#define SO_REUSE 0 //***************************************************************************** // // ---------- Statistics options ---------- // //***************************************************************************** //#define LWIP_STATS 1 //#define LWIP_STATS_DISPLAY 0 //#define LINK_STATS 1 //#define ETHARP_STATS (LWIP_ARP) //#define IP_STATS 1 //#define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG) //#define ICMP_STATS 1 //#define IGMP_STATS (LWIP_IGMP) //#define UDP_STATS (LWIP_UDP) //#define TCP_STATS (LWIP_TCP) //#define MEM_STATS 1 //#define MEMP_STATS 1 //#define SYS_STATS 1 //***************************************************************************** // // ---------- PPP options ---------- // //***************************************************************************** //#define PPP_SUPPORT 0 //#define PPPOE_SUPPORT 0 //#define PPPOS_SUPPORT PPP_SUPPORT #if PPP_SUPPORT //#define NUM_PPP 1 //#define PAP_SUPPORT 0 //#define CHAP_SUPPORT 0 //#define MSCHAP_SUPPORT 0 //#define CBCP_SUPPORT 0 //#define CCP_SUPPORT 0 //#define VJ_SUPPORT 0 //#define MD5_SUPPORT 0 //#define FSM_DEFTIMEOUT 6 //#define FSM_DEFMAXTERMREQS 2 //#define FSM_DEFMAXCONFREQS 10 //#define FSM_DEFMAXNAKLOOPS 5 //#define UPAP_DEFTIMEOUT 6 //#define UPAP_DEFREQTIME 30 //#define CHAP_DEFTIMEOUT 6 //#define CHAP_DEFTRANSMITS 10 //#define LCP_ECHOINTERVAL 0 //#define LCP_MAXECHOFAILS 3 //#define PPP_MAXIDLEFLAG 100 //#define PPP_MAXMTU 1500 //#define PPP_DEFMRU 296 #endif //***************************************************************************** // // ---------- checksum options ---------- // //***************************************************************************** #define CHECKSUM_GEN_IP 0 #define CHECKSUM_GEN_ICMP 0 #define CHECKSUM_GEN_UDP 0 #define CHECKSUM_GEN_TCP 0 #define CHECKSUM_CHECK_IP 0 #define CHECKSUM_CHECK_UDP 0 #define CHECKSUM_CHECK_TCP 0 //***************************************************************************** // // ---------- Debugging options ---------- // //***************************************************************************** #if 0 #define U8_F "c" #define S8_F "c" #define X8_F "x" #define U16_F "u" #define S16_F "d" #define X16_F "x" #define U32_F "u" #define S32_F "d" #define X32_F "x" extern void UARTprintf(const char *pcString, ...); #define LWIP_DEBUG #endif //#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_OFF #define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_OFF //#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_WARNING //#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_SERIOUS //#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_SEVERE //#define LWIP_DBG_TYPES_ON LWIP_DBG_ON #define LWIP_DBG_TYPES_ON (LWIP_DBG_ON|LWIP_DBG_TRACE| \ LWIP_DBG_STATE|LWIP_DBG_FRESH) //#define ETHARP_DEBUG LWIP_DBG_ON // default is OFF //#define NETIF_DEBUG LWIP_DBG_ON // default is OFF //#define PBUF_DEBUG LWIP_DBG_OFF //#define API_LIB_DEBUG LWIP_DBG_OFF //#define API_MSG_DEBUG LWIP_DBG_OFF //#define SOCKETS_DEBUG LWIP_DBG_OFF //#define ICMP_DEBUG LWIP_DBG_OFF //#define IGMP_DEBUG LWIP_DBG_OFF //#define INET_DEBUG LWIP_DBG_OFF //#define IP_DEBUG LWIP_DBG_ON // default is OFF //#define IP_REASS_DEBUG LWIP_DBG_OFF //#define RAW_DEBUG LWIP_DBG_OFF //#define MEM_DEBUG LWIP_DBG_OFF //#define MEMP_DEBUG LWIP_DBG_OFF //#define SYS_DEBUG LWIP_DBG_OFF //#define TCP_DEBUG LWIP_DBG_OFF //#define TCP_INPUT_DEBUG LWIP_DBG_OFF //#define TCP_FR_DEBUG LWIP_DBG_OFF //#define TCP_RTO_DEBUG LWIP_DBG_OFF //#define TCP_CWND_DEBUG LWIP_DBG_OFF //#define TCP_WND_DEBUG LWIP_DBG_OFF //#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF //#define TCP_RST_DEBUG LWIP_DBG_OFF //#define TCP_QLEN_DEBUG LWIP_DBG_OFF //#define UDP_DEBUG LWIP_DBG_ON // default is OFF //#define TCPIP_DEBUG LWIP_DBG_OFF //#define PPP_DEBUG LWIP_DBG_OFF //#define SLIP_DEBUG LWIP_DBG_OFF //#define DHCP_DEBUG LWIP_DBG_ON // default is OFF //#define AUTOIP_DEBUG LWIP_DBG_OFF //#define SNMP_MSG_DEBUG LWIP_DBG_OFF //#define SNMP_MIB_DEBUG LWIP_DBG_OFF //#define DNS_DEBUG LWIP_DBG_OFF #endif /* __LWIPOPTS_H__ */