// Copyright (c) 2023 Cesanta Software Limited
// All rights reserved

#pragma once

#include <stm32f429xx.h>

#define UUID ((uint8_t *) UID_BASE)  // Unique 96-bit chip ID. TRM 39.1

// Helper macro for MAC generation
#define GENERATE_LOCALLY_ADMINISTERED_MAC()                        \
  {                                                                \
    2, UUID[0] ^ UUID[1], UUID[2] ^ UUID[3], UUID[4] ^ UUID[5],    \
        UUID[6] ^ UUID[7] ^ UUID[8], UUID[9] ^ UUID[10] ^ UUID[11] \
  }

// For internal testing purposes
#ifdef UART_DEBUG
#include "main.h"
#define BIT(x) (1UL << (x))
static inline void test_init(void) {
  USART_TypeDef *uart = USART1;  // hardcode to USART1 PA9,10
  uint32_t freq = SystemCoreClock / BIT(((RCC->CFGR >> 13) & 0x7) - 3);
  __HAL_RCC_USART1_CLK_ENABLE();
  __HAL_RCC_GPIOA_CLK_ENABLE();
  GPIO_InitTypeDef GPIO_InitStruct = {.Pin = GPIO_PIN_10 | GPIO_PIN_9,
                                      .Mode = GPIO_MODE_AF_PP,
                                      .Pull = GPIO_NOPULL,
                                      .Speed = GPIO_SPEED_FREQ_VERY_HIGH,
                                      .Alternate = GPIO_AF7_USART1};
  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
  uart->CR1 = 0;                           // Disable this UART
  uart->BRR = freq / 115200;               // Set baud rate
  uart->CR1 |= BIT(13) | BIT(2) | BIT(3);  // Set UE, RE, TE
}
static inline void uart_write_byte(USART_TypeDef *uart, uint8_t byte) {
  uart->DR = byte;
  while ((uart->SR & BIT(7)) == 0) (void) 0;
}
#else
#define test_init()
#endif