mongoose/docs

User Guide

Introduction

Mongoose is a networking library for C/C++. It implements event-driven, non-blocking APIs for TCP, UDP, HTTP, WebSocket, MQTT. It connects devices and brings them online. Since 2004, a number of open source and commerical products have utilized it. It even runs on the International Space Station! Mongoose makes embedded network programming fast, robust, and easy.

Mongoose has two basic data structures:

• struct mg_mgr - An event manager that holds all active connections
• struct mg_connection - A single connection descriptor

Connections could be listening, outbound, or inbound. Outbound connections are created by the mg_connect() call. Listening connections are created by the mg_listen() call. Inbound connections are those accepted by a listening connection. Each connection is described by a struct mg_connection structure, which has a number of fields. All fields are exposed to the application by design, to give an application full visibility into Mongoose's internals.

2-minute intergration guide

In order to integrate Mongoose into an existing C/C++ aplicaction or firmware, please use the following steps:

Step 1. Copy mongoose.c and mongoose.h into the source code tree

Step 2. Add the following lines in your main.c file:

#include "mongoose.h"
...

static void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  struct mg_http_serve_opts opts = {.root_dir = "."};   // Serve local dir
  if (ev == MG_EV_HTTP_MSG) mg_http_serve_dir(c, ev_data, &opts);
}
...

int main() {
  ...

  struct mg_mgr mgr;                                
  mg_mgr_init(&mgr);
  mg_http_listen(&mgr, "0.0.0.0:8000", fn, NULL);     // Create listening connection
  for (;;) mg_mgr_poll(&mgr, 1000);                   // Block forever
}

Step 3. Add mongoose.c to the build and recompile - and that is it!

mg_mgr_poll() iterates over all connections, accepts new connections, sends and receives data, closes connections, and calls event handler functions for the respective events.

Each connection has two event handler functions: c->fn and c->pfn. The c->fn is a user-specified event handler function. The c->pfn is a protocol-specific handler function that is set implicitly. For example, a mg_http_listen() sets c->pfn to a Mongoose's HTTP event handler. A protocol-specific handler is called before a user-specific handler. It parses incoming data and may invoke protocol-specific events like MG_EV_HTTP_MSG.

NOTE: Since Mongoose's core is not protected against concurrent accesses, make sure that all mg_* API functions are called from the same thread or RTOS task.

Send and receive buffers

Each connection has a send and receive buffer:

• struct mg_connection::send - Data to be sent to a peer
• struct mg_connection::recv - Data received from a peer

When data arrives, Mongoose appends received data to the recv and triggers a MG_EV_READ event. The user may send data back by calling one of the output functions, like mg_send(), mg_printf() or a protocol-specific function like mg_ws_send. Output functions append data to the send buffer. When Mongoose successfully writes data to the socket, it discards data from struct mg_connection::send and sends an MG_EV_SEND event.

Event handler function

Each connection has an event handler function associated with it, which must be implemented by the user. Event handler is the key element of Mongoose, since it defines the connection's behavior. See below for an example of an event handler funcion:

// Event handler function defines connection's behavior
static void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_READ) {
    mg_send(c, c->recv.buf, c->recv.len);   // Implement echo server
    c->recv.len = 0;                        // Delete received data
  }
}

• struct mg_connection *c - A connection that received an event
• int ev - An event number, defined in mongoose.h. For example, when data arrives on an inbound connection, ev would be MG_EV_READ
• void *ev_data - Points to the event-specific data, and it has a different meaning for different events. For example, for an MG_EV_READ event, ev_data is an int * pointing to the number of bytes received from a remote peer and saved into the c->recv IO buffer. The exact meaning of ev_data is described for each event. Protocol-specific events usually have ev_data pointing to structures that hold protocol-specific information
• void *fn_data - A user-defined pointer for the connection, which is a placeholder for application-specific data. This fn_data pointer is set during the *_listen() or *_connect() call, and it is stored in the c->fn_data. Listening connections copy the value of c->fn_data to the newly accepted connection, so all accepted connections initially share the same fn_data pointer. It is fine to update/replace that pointer for any connection at any time by setting c->fn_data = new_value;

Events

Below is the list of events triggered by Mongoose, taken as-is from mongoose.h. For each event, a comment describes the meaning of the ev_data pointer passed to an event handler:

enum {
  MG_EV_ERROR,      // Error                        char *error_message
  MG_EV_POLL,       // mg_mgr_poll iteration        unsigned long *millis
  MG_EV_RESOLVE,    // Host name is resolved        NULL
  MG_EV_CONNECT,    // Connection established       NULL
  MG_EV_ACCEPT,     // Connection accepted          NULL
  MG_EV_READ,       // Data received from socket    struct mg_str *
  MG_EV_WRITE,      // Data written to socket       int *num_bytes_written
  MG_EV_CLOSE,      // Connection closed            NULL
  MG_EV_HTTP_MSG,   // HTTP request/response        struct mg_http_message *
  MG_EV_HTTP_CHUNK, // HTTP chunk (partial msg)     struct mg_http_message *
  MG_EV_WS_OPEN,    // Websocket handshake done     struct mg_http_message *
  MG_EV_WS_MSG,     // Websocket msg, text or bin   struct mg_ws_message *
  MG_EV_WS_CTL,     // Websocket control msg        struct mg_ws_message *
  MG_EV_MQTT_CMD,   // MQTT low-level command       struct mg_mqtt_message *
  MG_EV_MQTT_MSG,   // MQTT PUBLISH received        struct mg_mqtt_message *
  MG_EV_MQTT_OPEN,  // MQTT CONNACK received        int *connack_status_code
  MG_EV_SNTP_TIME,  // SNTP time received           struct timeval *
  MG_EV_USER,       // Starting ID for user events
};

Connection flags

struct mg_connection has a bitfield with connection flags. Flags are binary: they can be either 0 or 1. Some flags are set by Mongoose and must be not changed by an application code. For example, the is_udp flag tells the application if that connection is UDP or not. Some flags can be changed by application, for example, the is_draining flag, if set by an application, tells Mongoose to send the remaining data to a peer, and when everything is sent, close the connection.

NOTE: User-changeable flags are: is_hexdumping, is_draining, is_closing.

This is taken from mongoose.h as-is:

struct mg_connection {
  ...
  unsigned is_listening : 1;   // Listening connection
  unsigned is_client : 1;      // Outbound (client) connection
  unsigned is_accepted : 1;    // Accepted (server) connection
  unsigned is_resolving : 1;   // Non-blocking DNS resolv is in progress
  unsigned is_connecting : 1;  // Non-blocking connect is in progress
  unsigned is_tls : 1;         // TLS-enabled connection
  unsigned is_tls_hs : 1;      // TLS handshake is in progress
  unsigned is_udp : 1;         // UDP connection
  unsigned is_websocket : 1;   // WebSocket connection
  unsigned is_hexdumping : 1;  // Hexdump in/out traffic
  unsigned is_draining : 1;    // Send remaining data, then close and free
  unsigned is_closing : 1;     // Close and free the connection immediately
  unsigned is_readable : 1;    // Connection is ready to read
  unsigned is_writable : 1;    // Connection is ready to write
};

Build options

Mongoose source code ships in two files:

• mongoose.h - API definitions
• mongoose.c - Implementation

Therefore, to integrate Mongoose into an application, simply copy these two files to the application's source tree. The mongoose.c and mongoose.h files are actually an amalgamation - non-amalgamated sources can be found at https://github.com/cesanta/mongoose/tree/master/src

Mongoose has two types of build constants (preprocessor definitions) that affect the build: a target architecture, and tunables. In order to set the option during build time, use the -D OPTION compiler flag:

$ cc app0.c mongoose.c                                        # Use defaults!
$ cc app1.c mongoose.c -D MG_ENABLE_IPV6=1                    # Build with IPv6 enabled
$ cc app2.c mongoose.c -D MG_ARCH=MG_ARCH_FREERTOS_LWIP       # Set architecture
$ cc app3.c mongoose.c -D MG_ENABLE_SSI=0 -D MG_ENABLE_LOG=0  # Multiple options

The list of supported architectures is defined in the arch.h header file. Normally, there is no need to explicitly specify the architecture. The architecture is guessed during the build, so setting it is not usually required.

Name	Description
MG_ARCH_UNIX	All UNIX-like systems like Linux, MacOS, FreeBSD, etc
MG_ARCH_WIN32	Windows systems
MG_ARCH_ESP32	Espressif's ESP32
MG_ARCH_ESP8266	Espressif's ESP8266
MG_ARCH_FREERTOS_LWIP	All systems with FreeRTOS kernel and LwIP IP stack
MG_ARCH_FREERTOS_TCP	All systems with FreeRTOS kernel and FreeRTOS-Plus-TCP IP stack
MG_ARCH_CUSTOM	A custom architecture, discussed in the next section

The other class of build constants is defined in src/config.h together with their default values. These are tunables that include/exclude a certain functionality or change relevant parameters.

Here is a list of build constants and their default values:

Name	Default	Description
MG_ENABLE_SOCKET	1	Use BSD socket low-level API
MG_ENABLE_MBEDTLS	0	Enable Mbed TLS library
MG_ENABLE_OPENSSL	0	Enable OpenSSL library
MG_ENABLE_IPV6	0	Enable IPv6
MG_ENABLE_LOG	1	Enable LOG() macro
MG_ENABLE_MD5	0	Use native MD5 implementation
MG_ENABLE_SSI	1	Enable serving SSI files by mg_http_serve_dir()
MG_ENABLE_DIRLIST	0	Enable directory listing
MG_ENABLE_CUSTOM_RANDOM	0	Provide custom RNG function mg_random()
MG_ENABLE_PACKED_FS	0	Enable embedded FS support
MG_IO_SIZE	2048	Granularity of the send/recv IO buffer growth
MG_MAX_RECV_BUF_SIZE	(3 * 1024 * 1024)	Maximum recv buffer size
MG_MAX_HTTP_HEADERS	40	Maximum number of HTTP headers
MG_ENABLE_LINES	undefined	If defined, show source file names in logs

NOTE: the MG_IO_SIZE constant also sets maximum UDP message size, see issues/907 for details. If the application uses large UDP messages, increase the MG_IO_SIZE limit accordingly.

Custom build

A custom build should be used for cases which is not covered by the existing architecture options (e.g., an embedded architecture that uses some proprietary RTOS and network stack). In order to build on such systems, follow the outline below:

1. Add -DMG_ARCH=MG_ARCH_CUSTOM to your build flags.

2. Create a file called mongoose_custom.h, with defines and includes that are relevant to your platform. Mongoose uses bool type, MG_DIRSEP define, and optionally other structures like DIR * depending on the functionality you have enabled - see previous section. Below is an example:

#include <stdbool.h>
#include <stdarg.h>

#define MG_DIRSEP '/'
#define MG_INT64_FMT "%lld"
#define MG_ENABLE_SOCKET 0      // Disable BSD socket API, implement your own

3. This step is optional. If you have disabled BSD socket API, your build is going to fail due to several undefined symbols. Create mongoose_custom.c and implement the following functions (take a look at src/sock.c for the reference implementation):

struct mg_connection *mg_connect(struct mg_mgr *mgr, const char *url,
                                 mg_event_handler_t fn, void *fn_data) {
  // implement this!
}

void mg_connect_resolved(struct mg_connection *c) {
  // implement this!
}


struct mg_connection *mg_listen(struct mg_mgr *mgr, const char *url,
                                mg_event_handler_t fn, void *fn_data) {
  // implement this!
}

void mg_mgr_poll(struct mg_mgr *mgr, int ms) {
  // implement this!
}

int mg_send(struct mg_connection *c, const void *buf, size_t len) {
  // implement this!
}

Minimal HTTP server

This example is a simple static HTTP server that serves current directory:

#include "mongoose.h"

static void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  struct mg_http_serve_opts opts = {.root_dir = "."};   // Serve local dir
  if (ev == MG_EV_HTTP_MSG) mg_http_serve_dir(c, ev_data, &opts);
}

int main(int argc, char *argv[]) {
  struct mg_mgr mgr;
  mg_mgr_init(&mgr);                                        // Init manager
  mg_http_listen(&mgr, "http://localhost:8000", fn, &mgr);  // Setup listener
  for (;;) mg_mgr_poll(&mgr, 1000);                         // Event loop
  mg_mgr_free(&mgr);                                        // Cleanup
  return 0;
}

Minimal TCP echo server

This example is a simple TCP echo server that listens on port 1234:

#include "mongoose.h"

static void cb(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_READ) {
    mg_send(c, c->recv.buf, c->recv.len);     // Echo received data back
    mg_iobuf_del(&c->recv, 0, c->recv.len);   // And discard it
  }
}

int main(int argc, char *argv[]) {
  struct mg_mgr mgr;
  mg_mgr_init(&mgr);                                // Init manager
  mg_listen(&mgr, "tcp://0.0.0.0:1234", cb, &mgr);  // Setup listener
  for (;;) mg_mgr_poll(&mgr, 1000);                 // Event loop
  mg_mgr_free(&mgr);                                // Cleanup
  return 0;
}

API Reference

Core

struct mg_addr

struct mg_addr {
  uint16_t port;    // TCP or UDP port in network byte order
  uint32_t ip;      // IP address in network byte order
  uint8_t ip6[16];  // IPv6 address
  bool is_ip6;      // True when address is IPv6 address
};

This structure contains network address; it can be considered as a Mongoose equivalent for sockets sockaddr structure.

struct mg_mgr

struct mg_mgr {
  struct mg_connection *conns;  // List of active connections
  struct mg_dns dns4;           // DNS for IPv4
  struct mg_dns dns6;           // DNS for IPv6
  int dnstimeout;               // DNS resolve timeout in milliseconds
  unsigned long nextid;         // Next connection ID
  void *userdata;               // Arbitrary user data pointer
};

Event management structure that holds a list of active connections, together with some housekeeping information.

struct mg_connection

struct mg_connection {
  struct mg_connection *next;  // Linkage in struct mg_mgr :: connections
  struct mg_mgr *mgr;          // Our container
  struct mg_addr peer;         // Remote address. For listeners, local address
  void *fd;                    // Connected socket, or LWIP data
  unsigned long id;            // Auto-incrementing unique connection ID
  struct mg_iobuf recv;        // Incoming data
  struct mg_iobuf send;        // Outgoing data
  mg_event_handler_t fn;       // User-specified event handler function
  void *fn_data;               // User-specified function parameter
  mg_event_handler_t pfn;      // Protocol-specific handler function
  void *pfn_data;              // Protocol-specific function parameter
  char label[50];              // Arbitrary label
  void *tls;                   // TLS specific data
  unsigned is_listening : 1;   // Listening connection
  unsigned is_client : 1;      // Outbound (client) connection
  unsigned is_accepted : 1;    // Accepted (server) connection
  unsigned is_resolving : 1;   // Non-blocking DNS resolve is in progress
  unsigned is_connecting : 1;  // Non-blocking connect is in progress
  unsigned is_tls : 1;         // TLS-enabled connection
  unsigned is_tls_hs : 1;      // TLS handshake is in progress
  unsigned is_udp : 1;         // UDP connection
  unsigned is_websocket : 1;   // WebSocket connection
  unsigned is_hexdumping : 1;  // Hexdump in/out traffic
  unsigned is_draining : 1;    // Send remaining data, then close and free
  unsigned is_closing : 1;     // Close and free the connection immediately
  unsigned is_readable : 1;    // Connection is ready to read
  unsigned is_writable : 1;    // Connection is ready to write
};

A connection - either a listening connection, or an accepted connection, or an outbound connection.

mg_mgr_init()

void mg_mgr_init(struct mg_mgr *mgr);

Initialize event manager structure:

• Set a list of active connections to NULL
• Set default DNS servers for IPv4 and IPv6
• Set default DNS lookup timeout

Parameters:

• mgr - a pointer to mg_mgr structure that needs to be initialized

Return value: none

Usage example:

struct mg_mgr mgr;
mg_mgr_init(&mgr);

mg_mgr_poll()

void mg_mgr_poll(struct mg_mgr *mgr, int ms);

Perform a single poll iteration. For each connection in the mgr->conns list:

• See if there is incoming data. If there is, read it into the c->recv buffer, send MG_EV_READ event
• See if there is data in the c->send buffer, and write it, send MG_EV_WRITE event
• If a connection is listening, accept an incoming connection if any, and send MG_EV_ACCEPT event to it
• Send MG_EV_POLL event

Parameters:

• mgr - an event manager to use
• ms - a timeout in milliseconds

Return value: none

Usage example:

while (running == true) mg_mgr_poll(&mgr, 1000 /* 1 sec */);

mg_mgr_free()

void mg_mgr_free(struct mg_mgr *mgr);

Close all connections, and free all resources.

Parameters:

• mgr - an event manager to cleanup

Return value: none

Usage example:

struct mg_mgr mgr;
mg_mgr_init(&mgr);
while (running == true) mg_mgr_poll(&mgr, 1000);   // Event loop
mg_mgr_free(&mgr);

mg_listen()

struct mg_connection *mg_listen(struct mg_mgr *mgr, const char *url,
                                mg_event_handler_t fn, void *fn_data);

Create a listening connection, append this connection to mgr->conns.

Parameters:

• mgr - an event manager to use
• url - a URL. Specifies local IP address and port to listen on, e.g. tcp://127.0.0.1:1234 or udp://0.0.0.0:9000
• fn - an event handler function
• fn_data - an arbitrary pointer, which will be passed as fn_data when an event handler is called. This pointer is also stored in a connection structure as c->fn_data

Return value: created connection, or NULL on error.

Usage example:

struct mg_connection *c = mg_listen(&mgr, "tcp://127.0.0.1:8080", fn, NULL);

mg_connect()

struct mg_connection *mg_connect(struct mg_mgr *mgr, const char *url,
                                 mg_event_handler_t fn, void *fn_data);

Create an outbound connection, append this connection to mgr->conns.

Parameters:

• mgr - An event manager to use
• url - A URL, specifies remote IP address/port to connect to, e.g. http://a.com
• fn - An event handler function
• fn_data - An arbitrary pointer, which will be passed as fn_data when an event handler is called. This pointer is also stored in a connection structure as c->fn_data

Return value: created connection, or NULL on error.

Note: This function does not connect to peer, it allocates required resources and starts connect process. Once peer is really connected, MG_EV_CONNECT event is sent to connection event handler.

Usage example:

struct mg_connection *c = mg_connect(&mgr, "http://example.org", fn, NULL);

mg_send()

int mg_send(struct mg_connection *c, const void *data, size_t size);

Append data of size size to the c->send buffer. Return number of bytes appended.

Note: This function does not push data to the network. It only appends data to the output buffer. The data is being sent when mg_mgr_poll() is called. If mg_send() is called multiple times, the output buffer grows.

Parameters:

• c - A connection pointer
• data - A pointer to data to append to the send buffer
• size - A data size

Return value: true if data appended successfully and false otherwise

Usage example:

mg_send(c, "hi", 2);  // Append string "hi" to the output buffer

mg_printf()

int mg_printf(struct mg_connection *, const char *fmt, ...);

Same as mg_send(), but formats data using printf() semantics. Return number of bytes appended to the output buffer.

Parameters:

• c - a connection pointer
• fmt - a format string in printf semantics

Return value: number of bytes appended to the output buffer.

Usage example:

mg_printf(c, "Hello, %s!", "world"); // Add "Hello, world!" to output buffer

mg_vprintf()

int mg_vprintf(struct mg_connection *, const char *fmt, va_list ap);

Same as mg_printf(), but takes va_list argument as a parameter.

Parameters:

• c - A connection pointer
• fmt - A format string in printf semantics
• ap - An arguments list

Return value: Number of bytes appended to the output buffer.

Usage example:

void foo(struct mg_connection *c, const char *fmt, ...) {
  va_list ap;
  va_start(ap, fmt);
  mg_vprintf(c, fmt, ap);
  va_end(ap);
}

mg_straddr

char *mg_straddr(struct mg_connection *c, char *buf, size_t len);

Write stringified IP address, associated with given connection to buf (maximum size len)

Parameters:

• c - A connection pointer
• buf - A pointer to a buffer that will hold stringified address
• len - A buffer size

Return value: buf value

Usage example:

char buf[1024];
mg_straddr(c, buf, sizeof(buf)); // `buf` is now IP address string, like "127.0.0.1:8080"

mg_mkpipe()

struct mg_connection *mg_mkpipe(struct mg_mgr *, mg_event_handler_t, void *);

Create a "pipe" connection which is safe to pass to a different task/thread and used to wake up event manager from a different task. These functions are designed to implement multi-threaded support, to handle two common use cases:

• There are multiple consumer connections, e.g. connected websocket clients. A server constantly pushes some data to all of them. In this case, a data producer task should call mg_mgr_wakeup() as soon as more data is produced. A pipe's event handler should push data to all client connection. Use c->label to mark client connections.
• In order to serve a request, a long blocking operation should be performed. In this case, request handler assignes some marker to c->label and then spawns a handler task and gives a pipe to a handler task. A handler does its job, and when data is ready, wakes up a manager. A pipe's event handler pushes data to a marked connection.

Another task can wake up a sleeping event manager (in mg_mgr_poll() call) using mg_mgr_wakeup(). When an event manager is woken up, a pipe connection event handler function receives MG_EV_READ event.

Parameters:

• mgr - An event manager
• fn - A pointer to event handler function
• ud - A user data pointer. It will be passed to fn as fn_data parameter

Return value: Pointer to created connection or NULL in case of error

Usage example: see examples/multi-threaded.

mg_mgr_wakeup()

void mg_mgr_wakeup(struct mg_connection *pipe);

Wake up an event manager that sleeps in mg_mgr_poll() call. This function must be called from a separate task/thread. Parameters:

Parameters:

• pipe - a special connection created by the mg_mkpipe() call

Return value: None

Usage example: see examples/multi-threaded.

HTTP

struct mg_http_header

struct mg_http_header {
  struct mg_str name;   // Header name
  struct mg_str value;  // Header value
};

Structure represents HTTP header, like Content-Type: text/html. Content-Type is a header name and text/html is a header value.

struct mg_http_message

struct mg_http_message {
  struct mg_str method, uri, query, proto;             // Request/response line
  struct mg_http_header headers[MG_MAX_HTTP_HEADERS];  // Headers
  struct mg_str body;                                  // Body
  struct mg_str message;                               // Request line + headers + body
};

Structure represents the HTTP message.

mg_http_listen()

struct mg_connection *mg_http_listen(struct mg_mgr *mgr, const char *url,
                                     mg_event_handler_t fn, void *fn_data);

Create HTTP listener.

Parameters:

• mgr - An event manager
• url - A URL, specifies local IP address and port to listen on, e.g. http://0.0.0.0:8000
• fn - An event handler function
• fn_data - An arbitrary pointer, which will be passed as fn_data when an event handler is called. This pointer is also stored in a connection structure as c->fn_data

Return value: Pointer to created connection or NULL in case of error

Usage example:

struct mg_connection *c = mg_http_listen(&mgr, "0.0.0.0:8000", fn, arg);
if (c == NULL) fatal_error("Cannot create listener");

mg_http_connect()

struct mg_connection *mg_http_connect(struct mg_mgr *, const char *url,
                                      mg_event_handler_t fn, void *fn_data);

Create HTTP client connection.

Note: This function does not connect to peer; it allocates required resources and starts connect process. Once peer is really connected MG_EV_CONNECT event is sent to connection event handler.

Parameters:

• mgr - An event manager
• url - A URL, specifies remote URL, e.g. http://google.com
• fn - An event handler function
• fn_data - An arbitrary pointer, which will be passed as fn_data when an event handler is called. This pointer is also stored in a connection structure as c->fn_data

Return value: Pointer to created connection or NULL in case of error

Usage example:

struct mg_connection *c = mg_http_connect(&mgr, "http://google.com", fn, NULL);
if (c == NULL) fatal_error("Cannot create connection");

mg_http_get_request_len()

int mg_http_get_request_len(const unsigned char *buf, size_t buf_len);

Get length of request.

The length of request is a number of bytes till the end of HTTP headers. It does not include length of HTTP body.

Parameters:

• buf - A pointer to a buffer with request
• buf_len - Buffer length

Return value: -1 on error, 0 if a message is incomplete, or the length of request

Usage example:

const char *buf = "GET /test \n\nGET /foo\n\n";
int req_len = mg_http_get_request_len(buf, strlen(buf));  // req_len == 12

mg_http_parse()

int mg_http_parse(const char *s, size_t len, struct mg_http_message *hm);

Parse string request into mg_http_message structure

Parameters:

• s - A request string
• len - A request string length
• hm - A pointer to a structure to store parsed request

Return value: request length (see mg_http_get_request_len())

Usage example:

struct mg_http_message hm;
const char *buf = "GET / HTTP/1.0\n\n";
if (mg_http_parse(buf, strlen(buf), &hm) > 0) { /* success */ }

mg_http_printf_chunk()

void mg_http_printf_chunk(struct mg_connection *c, const char *fmt, ...);

Write a chunk of data in chunked encoding format, using printf() semantic.

Parameters:

• c - A connection pointer
• fmt - A string, format specified in printf semantics

Return value: None

Usage example:

mg_http_printf_chunk(c, "Hello, %s!", "world");

mg_http_write_chunk()

void mg_http_write_chunk(struct mg_connection *c, const char *buf, size_t len);

Write a chunk of data in chunked encoding format.

Parameters:

• c - A connection pointer
• buf - Data to write
• len - Data length

Return value: None

Usage example:

mg_http_write_chunk(c, "hi", 2);

mg_http_delete_chunk()

void mg_http_delete_chunk(struct mg_connection *c, struct mg_http_message *hm);

Remove chunk specified from input buffer.

Parameters:

• c - A connection pointer
• hm - Chunk to delete

Return value: None

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_HTTP_CHUNK) {
    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
    mg_http_delete_chunk(c, hm); // Remove received chunk
  }
}

mg_http_serve_dir()

struct mg_http_serve_opts {
  const char *root_dir;       // Web root directory, must be non-NULL
  const char *ssi_pattern;    // SSI file name pattern, e.g. #.shtml
  const char *extra_headers;  // Extra HTTP headers to add in responses
};
void mg_http_serve_dir(struct mg_connection *c, struct mg_http_message *hm,
                       const struct mg_http_serve_opts *opts);

Serve static files according to the given options. Note that in order to enable SSI, set a -DMG_ENABLE_SSI=1 build flag.

Parameters:

• c - Connection to use
• hm - HTTP message, that should be served
• opts - Serve options. Note that opts.root_dir can optionally accept extra comma-separated uri=path pairs, see example below

Return value: None

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_HTTP_MSG) {
    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
    struct mg_http_serve_opts opts;
    memset(&opts, 0, sizeof(opts));
    opts.root_dir = "/var/www,/conf=/etc";  // Serve /var/www. URIs starting with /conf are served from /etc
    mg_http_serve_dir(c, hm, &opts);
  }
}

mg_http_serve_file()

void mg_http_serve_file(struct mg_connection *c, struct mg_http_message *hm,
                        const char *path, struct mg_http_serve_opts *opts);

Serve static file. Note that the extra_headers must end with \r\n.

Parameters:

• c - Connection to use
• hm - HTTP message to serve
• path - Path to file to serve
• opts - Serve options

Return value: None

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_HTTP_MSG) {
    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
    struct mg_http_serve_opts opts = {.mime_types = "png=image/png",
                                  .extra_headers = "AA: bb\r\nCC: dd\r\n"};
    mg_http_serve_file(c, hm, "a.png", &opts);  // Send file
  }
}

mg_http_reply()

void mg_http_reply(struct mg_connection *c, int status_code,
                   const char *headers, const char *body_fmt, ...);

Send simple HTTP response using printf() semantic. This function formats response body according to a body_fmt, and automatically appends a correct Content-Length header. Extra headers could be passed via headers parameter.

Parameters:

• c - Connection to use
• status_code - An HTTP response code
• headers - Extra headers, default NULL. If not NULL, must end with \r\n
• fmt - A format string for the HTTP body, in a printf semantics

Return value: None

Usage examples:

Send a simple JSON respose:

mg_http_reply(c, 200, "Content-Type: application/json\r\n", "{\"result\": %d}", 123);

Send JSON response using mjson library:

char *json = NULL;
mjson_printf(mjson_print_dynamic_buf, &json, "{%Q:%d}", "name", 123);
mg_http_reply(c, 200, "Content-Type: application/json\r\n", "%s", json);
free(json);

Send a 302 redirect:

mg_http_reply(c, 302, "Location: /\r\n", "");

Send error:

mg_http_reply(c, 403, "", "%s", "Not Authorized\n");

mg_http_get_header()

struct mg_str *mg_http_get_header(struct mg_http_message *hm, const char *name);

Get HTTP header value

Parameters:

• hm - HTTP message to look for header
• name - Header name

Return value: HTTP header value or NULL if not found

Usage example:

// Mongoose event handler
void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_HTTP_MSG) {
    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
    struct mg_str *s = mg_http_get_header(hm, "X-Extra-Header");
    if (s != NULL) {
      mg_http_reply(c, 200, "", "Holly molly! Header value: %.*s", (int) s->len, s->ptr);
    } else {
      mg_http_reply(c, 200, "", "Oh no, header is not set...");
    }
  }
}

mg_http_get_var()

int mg_http_get_var(const struct mg_str *var, const char *name, char *buf, int len);

Decode HTTP variable

Parameters:

• var - HTTP request body
• name - Variable name
• buf - Buffer to write decoded variable
• len - Buffer size

Return value: Length of decoded variable. A zero or negative value means error

Usage example:

char buf[100] = "";
mg_http_get_var(&hm->body, "key1", buf, sizeof(buf)) {

mg_http_creds()

void mg_http_creds(struct mg_http_message *hm, char *user, size_t userlen,
                   char *pass, size_t passlen);

Fetch authentication credential from the request, and store into the user, userlen and pass, passlen buffers. The credentials are looked up in the following order:

• from the Authorization HTTP header,
  • Basic auth fills both user and pass
  • Bearer auth fills only pass
• from the access_token cookie, fills pass
• from the ?access_token=... query string parameter, fills pass

If none is found, then both user and pass are set to empty nul-terminated strings.

Parameters:

• hm - HTTP message to look for credentials
• user - buffer to receive user name
• userlen - size of user buffer
• pass - buffer to receive password
• passlen - size of pass buffer

Return value: None

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_HTTP_MSG) {
    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
    char user[100], pass[100];
    mg_http_creds(hm, user, sizeof(user), pass, sizeof(pass)); // "user" is now user name and "pass" is now password from request
  }
}

mg_http_match_uri()

bool mg_http_match_uri(const struct mg_http_message *hm, const char *glob);

Check if HTTP request matches a given glob pattern.

Parameters:

• hm - HTTP message to match
• glob - Pattern

Return value: True if HTTP request matches a given glob pattern; false otherwise

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_HTTP_MSG) {
    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
    if (mg_http_match_uri(hm, "/secret")) {
      mg_http_reply(c, 200, NULL, "Very big secret!");
    } else {
      mg_http_reply(c, 200, NULL, "hello world..");
    }
  }
}

mg_http_upload()

int mg_http_upload(struct mg_connection *c, struct mg_http_message *hm,
                   const char *dir);

Handle file upload. See file upload example.

This function expects a series of POST requests with file data. POST requests should have name and offset query string parameters set:

POST /whatever_uri?name=myfile.txt&offset=1234 HTTP/1.0
Content-Length: 5

hello

• name - A mandatory query string parameter, specifies a file name. It it created in the dir directory
• offset - An optional parameter, default 0. If it set to 0, or omitted, then a file gets truncated before write. Otherwise, the body of the POST request gets appended to the file
• Server must call mg_http_upload() when /whatever_uri is hit

The expected usage of this API function follows:

• A client splits a file into small enough chunks, to ensure that a chunk fits into the server's RAM
• Then, each chunk is POST-ed to the server with using URI, like /some_uri?name=FILENAME&offset=OFFSET
• Initial OFFSET is 0, and subsequent offsets are non-zero
• Each chunk gets appended to the file
• When the last chunk is POST-ed, upload finishes
• POST data must not be encoded in any way; it it saved as-is

Parameters:

• c - Connection to use
• hm - POST message, containing parameters described above
• dir - Path to directory

Return value: Request body len or negative value on error

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_HTTP_MSG) {
    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
    mg_http_upload(c, hm, "."); // Upload to current folder
  }

mg_http_bauth()

void mg_http_bauth(struct mg_connection *c, const char *user, const char *pass);

Write a Basic Authorization header to the output buffer.

Parameters:

• c - Connection to use
• user - User name
• pass - Password

Return value: None

Usage example:

mg_http_bauth(c, "user_name", "password") // "user_name:password" is now in output buffer

mg_http_next_multipart()

// Parameter for mg_http_next_multipart
struct mg_http_part {
  struct mg_str name;      // Form field name
  struct mg_str filename;  // Filename for file uploads
  struct mg_str body;      // Part contents
};

size_t mg_http_next_multipart(struct mg_str body, size_t offset, struct mg_http_part *part);

Parse the multipart chunk in the body at a given offset. An initial offset should be 0. Fill up parameters in the provided part, which could be NULL. Return offset to the next chunk, or 0 if there are no more chunks.

Parameters:

• body- Message body
• offset - Start offset
• part - Pointer to struct mg_http_part to fill

Return value: offset to the next chunk, or 0 if there are no more chunks.

See File upload tutorial for full usage example.

Usage example:

struct mg_http_part part;
if(mg_http_next_multipart(body, 0 /* begin */, &part)) {
  // Use part
}

Websocket

struct mg_ws_message

struct mg_ws_message {
  struct mg_str data; // Websocket message data
  uint8_t flags;      // Websocket message flags
};

Structure represents the WebSocket message.

mg_ws_connect()

struct mg_connection *mg_ws_connect(struct mg_mgr *mgr, const char *url,
                                    mg_event_handler_t fn, void *fn_data,
                                    const char *fmt, ...);

Create client Websocket connection.

Note: this function does not connect to peer, it allocates required resources and starts the connect process. Once peer is really connected, the MG_EV_CONNECT event is sent to connection event handler.

Parameters:

• mgr - Event manager to use
• url - Specifies remote URL, e.g. http://google.com
• opts - MQTT options, with client ID, qos, etc
• fn - An event handler function
• fn_data - An arbitrary pointer, which will be passed as fn_data when an event handler is called. This pointer is also stored in a connection structure as c->fn_data
• fmt - printf-like format string for additional HTTP headers, or NULL

Return value: Pointer to created connection or NULL on error

Usage example:

struct mg_connection *c = mg_ws_connect(&mgr, "ws://test_ws_server.com:1000",
                                        handler, NULL, "%s", "Sec-WebSocket-Protocol: echo\r\n");
if(c == NULL) fatal("Cannot create connection");

mg_ws_upgrade()

void mg_ws_upgrade(struct mg_connection *c, struct mg_http_message *,
                   const char *fmt, ...);

Upgrade given HTTP connection to Websocket. The fmt is a printf-like format string for the extra HTTP headers returned to the client in a Websocket handshake. Set fmt to NULL if no extra headers need to be passed.

Parameters:

• c - Connection to use
• hm - HTTP message
• fmt - printf-like format string for additional HTTP headers, or NULL

Return value: None

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_HTTP_MSG) {
    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
    mg_ws_upgrade(c, hm, NULL);  // Upgrade HTTP to WS
  }
}

mg_ws_send()

size_t mg_ws_send(struct mg_connection *c, const char *buf, size_t len, int op);

Send data to websocket peer

Parameters:

• c - Connection to use
• buf - Data to send
• len - Data size
• op - Websocket message type

Return value: sent bytes count

Possible Websocket message type:

#define WEBSOCKET_OP_CONTINUE 0
#define WEBSOCKET_OP_TEXT 1
#define WEBSOCKET_OP_BINARY 2
#define WEBSOCKET_OP_CLOSE 8
#define WEBSOCKET_OP_PING 9
#define WEBSOCKET_OP_PONG 10

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_WS_OPEN) {
    struct mg_http_message *hm = (struct mg_http_message *) ev_data;
    mg_ws_send(c, "opened", 6, WEBSOCKET_OP_BINARY);  // Send "opened" to web socket connection
  }
}

mg_ws_wrap()

size_t mg_ws_wrap(struct mg_connection *c, size_t len, int op)

Convert data in output buffer to WebSocket format. Useful then implementing protocol over WebSocket See examples/mqtt-over-ws-client for full example.

Parameters:

• c - Connection to use
• len - Bytes count to convert
• op - Websocket message type (see mg_ws_send)

Return value: New size of connection output buffer

Usage example:

size_t len = c->send.len;         // Store output buffer len
mg_mqtt_login(c, s_url, &opts);   // Write MQTT login message
mg_ws_wrap(c, c->send.len - len, WEBSOCKET_OP_BINARY); // Wrap it into WS

SNTP

mg_sntp_connect()

struct mg_connection *mg_sntp_connect(struct mg_mgr *mgr, const char *url,
                                      mg_event_handler_t fn, void *fn_data)

Connect SNTP server.

Parameters:

• mgr - Event manager to use
• url - Specifies remote URL, time.google.com if NULL.
• fn - An event handler function
• fn_data - An arbitrary pointer, which will be passed as fn_data when an event handler is called. This pointer is also stored in a connection structure as c->fn_data

Return value: Pointer to created connection or NULL on error

Usage example:

static void sntp_cb(struct mg_connection *c, int ev, void *evd, void *fnd) {
  if (ev == MG_EV_SNTP_TIME) {
    // Time received
    struct timeval *tv = (struct timeval *tv)evd;
  }
}
...
mg_sntp_connect(mgr&, NULL /* connect to time.google.com */, sntp_cb, NULL);

mg_sntp_send()

void mg_sntp_send(struct mg_connection *c, unsigned long utc)

Send time request to SNTP server. Note: This app can't send SNTP request more often than every one hour.

Parameters:

• c - Connection to use
• utc - Current time, used to verify if new request is possible.

Return value: None

Usage example:

mg_sntp_send(c, (unsigned long) time(NULL));

MQTT

struct mg_mqtt_opts

struct mg_mqtt_opts {
  struct mg_str client_id;    // Client id
  struct mg_str will_topic;   // Will Topic
  struct mg_str will_message; // Will Message
  uint8_t qos;                // Quality of service
  bool will_retain;           // Retain last will
  bool clean;                 // Use clean session, 0 or 1
  uint16_t keepalive;         // Keep-alive timer in seconds
};

Structure used to specify MQTT connection options.

struct mg_mqtt_message

struct mg_mqtt_message {
  struct mg_str topic;  // Topic
  struct mg_str data;   // Message data
};

Structure represents the MQTT message.

mg_mqtt_connect()

struct mg_connection *mg_mqtt_connect(struct mg_mgr *mgr, const char *url,
                                      struct mg_mqtt_opts *opts,
                                      mg_event_handler_t fn, void *fn_data);

Create client MQTT connection.

Note: This function does not connect to peer; it allocates required resources and starts connect process. Once peer is really connected MG_EV_CONNECT event is sent to connection event handler.

Parameters:

• mgr - Event manager to use
• url - Specifies remote URL, e.g. http://google.com
• opts - MQTT options, with client ID, qos, etc
• fn - An event handler function
• fn_data - An arbitrary pointer, which will be passed as fn_data when an event handler is called. This pointer is also stored in a connection structure as c->fn_data

Return value: pointer to created connection or NULL on error

Usage example:

void fn(struct mg_connection *c, int ev, void *evd, void *fnd) {
  char *buf = (char *) fnd;
  if (ev == MG_EV_MQTT_OPEN) {
    // Connection ready
  }
}

mg_mqtt_connect(&mgr, "mqtt://test.org:1883", NULL, handler, NULL);

mg_mqtt_listen()

struct mg_connection *mg_mqtt_listen(struct mg_mgr *mgr, const char *url,
                                     mg_event_handler_t fn, void *fn_data);

Create MQTT listener.

Parameters:

• mgr - Event manager to use
• url - Specifies local IP address and port to listen on, e.g. mqtt://0.0.0.0:1883
• fn - An event handler function
• fn_data - An arbitrary pointer, which will be passed as fn_data when an event handler is called. This pointer is also stored in a connection structure as c->fn_data

Return value: Pointer to created connection or NULL on error

Usage example:

struct mg_connection *c = mg_mqtt_listen(&mgr, "0.0.0.0:1883", fn, arg);
if (c == NULL) fatal("Cannot create connection");

mg_mqtt_login

void mg_mqtt_login(struct mg_connection *c, const char *url,
                   struct mg_mqtt_opts *opts);

Send MQTT login request.

Parameters:

• c - Connection to use
• url - URL, containing user name and password to use
• opts - Request options

Return value: None

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *evd, void *fnd) {
  char *buf = (char *) fnd;
  if (ev == MG_EV_MQTT_OPEN) {
    struct mg_mqtt_opts opts = {.qos = 1,
                                .will_topic = mg_str("my topic"),
                                .will_message = mg_str("goodbye")};
    mg_mqtt_login(c, s_url, &opts);
  }
}

mg_mqtt_pub()

void mg_mqtt_pub(struct mg_connection *c, struct mg_str *topic,
                 struct mg_str *data, int qos, bool retain);

Publish message.

Parameters:

• c - Connection to use
• topic - Topic to publish data
• data - Data to publish
• qos - Required QoS
• retain - Retain flag

Return value: None

Usage example:

struct mg_str topic = mg_str("topic");
struct mg_str data = mg_str("data");
mg_mqtt_pub(c, &topic, &data, 1, false);

mg_mqtt_sub()

void mg_mqtt_sub(struct mg_connection *c, struct mg_str *topic, int qos);

Subscribe to topic.

Parameters:

• c - Connection to use
• topic - Topic to subscribe
• qos - Required Qos

Return value: none

struct mg_str topic = mg_str("topic");
mg_mqtt_sub(c, &topic, 1);

mg_mqtt_next_sub()

size_t mg_mqtt_next_sub(struct mg_mqtt_message *msg, struct mg_str *topic, uint8_t *qos, size_t pos);

Traverse list of subscribed topics. Used to implement MQTT server when MQTT_CMD_SUBSCRIBE is received. Initial position pos should be 4.

Parameters:

• mgs - MQTT message
• topic - Pointer to mg_str to receive topic
• qos - Pointer to uint8_t to receive qos
• pos - Position to list from

Return value: Next position, or 0 when done

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *evd, void *fnd) {
  if (ev == MG_EV_MQTT_CMD) {
    struct mg_mqtt_message *mm = (struct mg_mqtt_message *) ev_data;
    if (mm->cmd == MQTT_CMD_SUBSCRIBE) {
      size_t pos = 4;
      uint8_t qos;
      struct mg_str topic;
      // Iterate over all subscribed topics
      while ((pos = mg_mqtt_next_sub(mm, &topic, &qos, pos)) > 0) {
        LOG(LL_INFO, ("SUB [%.*s]", (int) topic.len, topic.ptr));
      }
    }
  }
}

mg_mqtt_next_unsub()

size_t mg_mqtt_next_unsub(struct mg_mqtt_message *msg, struct mg_str *topic, size_t pos);

Same as mg_mqtt_next_sub(), but for unsubscribed topics. The difference is that there is no QoS in unsubscribe request.

Parameters:

• mgs - MQTT message
• topic - Pointer to mg_str to receive topic
• pos - Position from which to list

Return value: Next position, or 0 when done

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *evd, void *fnd) {
  if (ev == MG_EV_MQTT_CMD) {
    struct mg_mqtt_message *mm = (struct mg_mqtt_message *) ev_data;
    if (mm->cmd == MQTT_CMD_UNSUBSCRIBE) {
      size_t pos = 4;
      struct mg_str topic;
      if (mm->cmd == MQTT_CMD_UNSUBSCRIBE) {
        // Iterate over all unsubscribed topics
        while ((pos = mg_mqtt_next_unsub(mm, &topic, pos)) > 0) {
          LOG(LL_INFO, ("SUB [%.*s]", (int) topic.len, topic.ptr));
        }
      }
   }
  }
}

mg_mqtt_send_header()

void mg_mqtt_send_header(struct mg_connection *c, uint8_t cmd, uint8_t flags, uint32_t len);

Send MQTT command header. Useful in MQTT server implementation. Command can be one of the following value:

#define MQTT_CMD_CONNECT 1
#define MQTT_CMD_CONNACK 2
#define MQTT_CMD_PUBLISH 3
#define MQTT_CMD_PUBACK 4
#define MQTT_CMD_PUBREC 5
#define MQTT_CMD_PUBREL 6
#define MQTT_CMD_PUBCOMP 7
#define MQTT_CMD_SUBSCRIBE 8
#define MQTT_CMD_SUBACK 9
#define MQTT_CMD_UNSUBSCRIBE 10
#define MQTT_CMD_UNSUBACK 11
#define MQTT_CMD_PINGREQ 12
#define MQTT_CMD_PINGRESP 13
#define MQTT_CMD_DISCONNECT 14

Parameters:

• c - Connection to use
• cmd - Command (see above)
• flags - Command flags
• len - Size of the following command

Return value: None

Usage example:

// Mongoose events handler
void fn(struct mg_connection *c, int ev, void *ev_data, void *fn_data) {
  if (ev == MG_EV_MQTT_CMD) {
    struct mg_mqtt_message *mm = (struct mg_mqtt_message *) ev_data;
    if (mm->cmd == MQTT_CMD_CONNECT) {
        uint8_t response[] = {0, 0};
        mg_mqtt_send_header(c, MQTT_CMD_CONNACK, 0, sizeof(response));  // Send acknowledgement
        mg_send(c, response, sizeof(response));
    }
  }
}

mg_mqtt_ping()

void mg_mqtt_ping(struct mg_connection *c);

Send MQTT_CMD_PINGREQ command via mg_mqtt_send_header

Parameters:

• c - Connection to use

Return value: None

Usage example:

// Send periodic pings to all WS connections
static void timer_fn(void *arg) {
  struct mg_mgr *mgr = (struct mg_mgr *) arg;
  for (struct mg_connection *c = mgr->conns; c != NULL; c = c->next) {
    if (c->is_websocket) mg_mqtt_ping(c);
  }
}

mg_mqtt_parse

int mg_mqtt_parse(const uint8_t *buf, size_t len, struct mg_mqtt_message *m);

Parse buffer and fill mg_mqtt_message structure if buffer contain MQTT message.

Parameters:

• buf - buffer with MQTT message to parse
• len - buffer size
• m - pointer to mg_mqtt_message structure to receive parsed message

Return value: MQTT_OK if message successfully parsed, MQTT_INCOMPLETE if message isn't fully received and MQTT_MALFORMED if message has wrong format.

Usage example:

// Iterate over all MQTT frames contained in buf, len
struct mg_mqtt_message mm;
while ((mg_mqtt_parse(buf, len, &mm)) == 0) {
  switch (mm.cmd) {
    case MQTT_CMD_CONNACK:
      ...
  }
  buf += mm.dgram.len;
  len -= mm.dgram.len;
}

TLS

struct mg_tls_opts

struct mg_tls_opts {
  const char *ca;        // CA certificate file. For both listeners and clients
  const char *crl;       // Certificate Revocation List. For clients
  const char *cert;      // Certificate
  const char *certkey;   // Certificate key
  const char *ciphers;   // Cipher list
  struct mg_str srvname; // If not empty, enables server name verification
};

TLS initialisation structure:

• ca - Certificate Authority. Can be a filename or a string. Used to verify a certificate that the other end sends to us. If NULL, then certificate checking is disabled
• crl - Certificate Revocation List. Can be a filename or a string. Used to verify a certificate that the other end sends to us. If NULL, then certificate revocation checking is disabled
• cert - Our own certificate. Can be a filename, or a string. If NULL, then we don't authenticate with the other peer
• certkey - A key for a cert. Sometimes, a certificate and its key are bundled in a single .pem file, in which case the values for cert and certkey could be the same
• ciphers - A list of allowed ciphers
• srvname - Enable server name verification

NOTE: if both ca and cert are set, then so-called two-way TLS is enabled, when both sides authenticate with each other. Usually, server-side connections set both ca and cert, whilst client-side - only ca.

mg_tls_init()

void mg_tls_init(struct mg_connection *c, struct mg_tls_opts *opts);

Initialise TLS on a given connection.

NOTE: mbedTLS implementation uses mg_random as RNG. The mg_random can be overridden by setting MG_ENABLE_CUSTOM_RANDOM and defining your own mg_random() implementation.

Parameters:

• c - Connection, for which TLS should be initialized
• opts - TLS initialization parameters

Return value: None

Usage example:

struct mg_tls_opts opts = {.cert = "ca.pem"};
mg_tls_init(c, &opts);

Timer

struct mg_timer

struct mg_timer {
  int period_ms;            // Timer period in milliseconds
  int flags;                // Possible flags values below
  void (*fn)(void *);       // Function to call
  void *arg;                // Function argument
  unsigned long expire;     // Expiration timestamp in milliseconds
  struct mg_timer *next;    // Linkage in g_timers list
};

#define MG_TIMER_REPEAT 1   // Call function periodically, otherwise run once
#define MG_TIMER_RUN_NOW 2  // Call immediately when timer is set

Timer structure. Describes a software timer. Timer granularity is the same as the mg_mgr_poll() timeout argument in the main event loop.

mg_timer_init()

void mg_timer_init(struct mg_timer *t, unsigned long ms, unsigned flags,
                   void (*fn)(void *), void *fn_data);

Setup a timer.

Parameters:

• t - Pointer to mg_timer that should be initialized
• ms - An interval in milliseconds
• flags - Timer flags bitmask, MG_TIMER_REPEAT and MG_TIMER_RUN_NOW
• fn - Function to invoke
• fn_data - Function argument

Return value: None

Usage example:

void timer_fn(void *data) {
  // ...
}

struct mg_timer timer;
mg_timer_init(&timer, 1000 /* 1sec */, MG_TIMER_REPEAT, timer_fn, NULL);
// A timer gets initialized and linked into the internal timers list

mg_timer_free()

void mg_timer_free(struct mg_timer *t);

Free timer, remove it from the internal timers list.

Parameters:

• t - Timer to free

Return value: None

Usage example:

struct mg_timer timer;
// ...
mg_timer_free(&timer);

mg_timer_poll()

void mg_timer_poll(unsigned long uptime_ms);

Traverse list of timers and call them if current timestamp uptime_ms is past the timer's expiration time.

Note, that mg_mgr_poll function internally calls mg_timer_poll; therefore, in most cases it is unnecessary to call it explicitly.

Parameters:

• uptime_ms - current timestamp

Return value: None

Usage example:

unsigned long now = mg_millis();
mg_timer_poll(now);

Time

mg_time()

double mg_time(void);

Return current time as UNIX epoch, using double value for sub-second accuracy.

Parameters: None

Return value: Current time

Usage example:

double now = mg_time()

mg_millis()

unsigned long mg_millis(void);

Return current uptime in milliseconds.

Parameters: None

Return value: Current uptime

Usage example:

unsigned long uptime = mg_millis();

mg_usleep()

void mg_usleep(unsigned long usecs);

Block thread execution for a given number of microseconds.

Parameters:

• usecs - number of microseconds to block thread

Return value: None

Usage example:

mg_usleep(1000000 /* 1 sec */)

String

struct mg_str

struct mg_str {
  const char *ptr;  // Pointer to string data
  size_t len;       // String len
};

This structure represent an arbitrary chunk of memory, not necessarily zero-terminated. This is a "mongoose string", and it gets used extensively in the codebase instead of C zero-terminated strings.

For example, when an HTTP request is received, Mongoose created a struct mg_http_message which has a collection of struct mg_str poiting to request method, URI, headers, and so on. This way, Mongoose avoids any heap allocations and does not modify the received buffer - instead, it uses struct mg_str to describe various parts of HTTP request.

Same goes with many other cases.

NOTE: since ptr is not necessarily zero-terminated, do not use libc string functions agaist it - like strlen() or sscanf().

mg_str()

struct mg_str mg_str(const char *s)

Create Mongoose string from NULL-terminated C-string. This function doesn't duplicate provided string, and stores pointer within created mg_str structure.

Note, that is you have problems in C++ (constructor shadowing), there is mg_str_s synonym for this function.

Parameters:

• s - Pointer to NULL-terminated string to store in created mg_str

Return value: Created Mongoose string

Usage example:

struct mg_str str = mg_str("Hello, world!);

mg_str_n()

struct mg_str mg_str_n(const char *s, size_t n);

Create Mongoose string from C-string s (can be non-NULL terminated, len is specified in n).
Note: This function doesn't duplicate provided string, but stores pointer within created mg_str structure.

Parameters:

• s - Pointer to string to store in created mg_str
• n - String len

Return value: Created Mongoose string

Usage example:

struct mg_str str = mg_str_n("hi", 2);

mg_casecmp()

int mg_casecmp(const char *s1, const char *s2);

Case insensitive compare two NULL-terminated strings.

Parameters:

• s1, s2 - Pointers to strings to compare

Return value: Zero if strings are equal, more than zero if first argument is greater then second, and less than zero otherwise

Usage example:

if (mg_casecmp("hello", "HELLO") == 0) {
  // Strings are equal
}

mg_ncasecmp()

int mg_ncasecmp(const char *s1, const char *s2, size_t len);

Case insensitive compare two C-strings, not more than len symbols or until meet \0 symbol.

Parameters:

• s1, s2 - Pointers to strings to compare
• len - Maximum length to compare

Return value: Zero if strings are equal, more than zero if first argument is greater then second, and less than zero otherwise

Usage example:

if (mg_ncasecmp("hello1", "HELLO2", 5) == 0) {
  // Strings are equal
}

mg_vcmp()

int mg_vcmp(const struct mg_str *s1, const char *s2);

Сompare mongoose string and C-string.

Parameters:

• s1 - Pointer to Mongoose string to compare
• s2 - Pointer to C-string to compare

Return value: 0 if strings are equal, more than zero if first argument is greater then second, and less than zero otherwise

Usage example:

struct mg_str str = mg_str("hello");
if (mg_vcmp(str, "hello") == 0) {
  // Strings are equal
}

mg_vcasecmp()

int mg_vcasecmp(const struct mg_str *str1, const char *str2);

Case insensitive compare mongoose string and C-string.

Parameters:

• str1 - Mongoose string to compare
• str2 - C-string to compare

Return value: Zero if strings are equal, more than zero if first argument is greater then second, and less than zero otherwise

Usage example:

struct mg_str str = mg_str("hello");
if (mg_vcasecmp(str, "HELLO") == 0) {
  // Strings are equal
}

mg_strcmp()

int mg_strcmp(const struct mg_str str1, const struct mg_str str2);

Сompare two mongoose strings.

Parameters:

• str1, str2 - Pointers to Mongoose strings to compare

Return value: Zero if strings are equal, more than zero if first argument is greater then second, and less than zero otherwise

Usage example:

struct mg_str str1 = mg_str("hello");
struct mg_str str2 = mg_str("hello");
if (mg_strcmp(str1, str2) == 0) {
  // Strings are equal
}

mg_strdup()

struct mg_str mg_strdup(const struct mg_str s);

Duplicate provided string. Return new string or MG_NULL_STR on error. Note: This function allocates memory for returned string. You may need to free it using free function.

Parameters:

• s - Mongoose string to duplicate

Return value: Duplicated string

Usage example:

struct mg_str str1 = mg_str("hello");
struct mg_str str2 = mg_strdup(str1);
//...
free(str1.ptr);

mg_strstr()

const char *mg_strstr(const struct mg_str haystack, const struct mg_str needle)

Search for needle substring in haystack string.

Parameters:

• haystack - Mongoose sting to search for substring
• needle - Mongoose string to search

Return value: pointer to needle occurrence within haystack or NULL if not found.

Usage example:

struct mg_str str = mg_str("Hello, world");
struct mg_str sub_str = mg_str("world");

if (mg_strstr(str, sub_str) != NULL) {
  // Found
}

mg_strstrip()

struct mg_str mg_strstrip(struct mg_str s)

Remove heading and trailing whitespace from mongoose string s.

Paramaters:

• s - Mongoose string for trimming

Return value: Input string

Usage example:

struct mg_str str = mg_strstrip(mg_str("   Hello, world   "));
if (mg_vcmp(str, "Hello, world") == 0) {
  // Strings are equal
}

mg_globmatch()

bool mg_globmatch(const char *pattern, size_t p_len, const char *s, size_t s_len);

Check if string s (limited to s_len symbols) matches glob pattern pattern, (limited to p_len symbols). The glob pattern matching rules are as follows:

• ? matches any single character
• * matches zero or more characters except /
• # matches zero or more characters
• any other character matches itself

Parameters:

• pattern - Pattern to match for
• p_len - Pattetn lenght
• s - String to match
• s_len - String lenght

Return value: true if matches, false otherwise

Usage example:

struct mg_str pattern = mg_str("#, ?????");
struct mg_str s = mg_str("Hello, world");

if (mg_globmatch(pattern.ptr, pattern.len, s.otr, s.len)) {
  // Match
}

mg_commalist()

bool mg_commalist(struct mg_str *s, struct mg_str *k, struct mg_str *v);

Parse string s, which is a comma-separated list of entries. An entry could be either an arbitrary string, which gets stored in v, or a KEY=VALUE which gets stored in k and v respectively.

IMPORTANT: This function modifies s by pointing to the next entry.

Parameters:

• s - String to search for entry
• k - Pointer to mg_str to receive entry key
• v - Pointer to mg_str to receive entry value

Return value: true if entry is found, false otherwise

Usage example:

struct mg_str k, v, s = mg_str("a=333,b=777");
while (mg_commalist(&s, &k, &v))                      // This loop output:
  printf("[%.*s] set to [%.*s]\n",                    // [a] set to [333]
         (int) k.len, k.ptr, (int) v.len, v.ptr);     // [b] set to [777]

mg_hexdump()

char *mg_hexdump(const void *buf, int len);

Hexdump binary data buf, len into malloc-ed buffer and return it. It is a caller's responsibility to free() returned pointer.

Parameters:

• buf - Data to hexdump
• len - Data lenght

Return value: malloc-ed buffer with hexdumped data

Usage example:

char arr[] = "\0x1\0x2\0x3";
char *hex = mg_hexdump(arr, sizeof(arr));
LOG(LL_INFO, ("%s", hex)); // Output "0000  01 02 03 00";
free(hex);

mg_hex()

char *mg_hex(const void *buf, size_t len, char *dst);

Hex-encode binary data buf, len into a buffer dst and nul-terminate it. The output buffer must be at least 2 x len + 1 big.

Parameters:

• buf - Data to hex-encode
• len - Data length
• dst - Pointer to output buffer

Return value: dst pointer. The encoded characters are lowercase

Usage example:

char data[] = "\x1\x2\x3";
char buf[sizeof(data)*2];
char *hex = mg_hex(data, sizeof(data) - 1, buf);
LOG(LL_INFO, ("%s", hex)); // Output "010203";
free(hex);

mg_unhex()

void mg_unhex(const char *buf, size_t len, unsigned char *to);

Hex-decode string buf, len into a buffer to. The to buffer should be at least lsn / 2 big.

Parameters:

• buf - Data to hex-decode
• len - Data length
• to - Pointer to output buffer

Return value: None

Usage example:

char data[] = "010203";
char *buf[sizeof(data)/2];
char *hex = mg_unhex(data, sizeof(data) - 1, buf); // buf is now [1,2,3]
free(hex);

mg_unhexn()

unsigned long mg_unhexn(const char *s, size_t len);

Parse len characters of the hex-encoded string s. The maximum value of len is the width of the long x 2, for example on 32-bit platforms it is 8.

Parameters:

• s - String to parse
• len - String length

Return value: Return parsed value

Usage example:

char data[] = "010203";
char *buf[sizeof(data)/2];
unsigned long val = mg_unhex(data, sizeof(data) - 1); // val is now 123

mg_asprintf()

int mg_asprintf(char **buf, size_t size, const char *fmt, ...);

Print message specified by printf-like format string fmt into a buffer pointed by buf of size size. If size is large enough to hold the whole message, then a message is stored in *buf. If it does not fit, then a large enough buffer is allocated to hold a message, and buf is changed to point to that buffer.

Parameters:

• buf - Pointer to pointer to output buffer
• size - Pre-allocated buffer size
• fmt - printf-like format string

Return value: Number of bytes printed

Usage example:

char buf[1024], *pbuf = &buf;
mg_asprintf(&pbuf, sizeof(buf), "Hello, %s!", "world"); // buf is now "Hello, world!"

mg_vasprintf()

int mg_vasprintf(char **buf, size_t size, const char *fmt, va_list ap);

Same as mg_asprintf() but uses va_list argument.

Parameters:

• buf - Pointer to pointer to output buffer
• size - Pre-allocated buffer size
• fmt - printf-like format string
• ap - Parameters list

Return value: Number of bytes printed

Usage example:

void foo(const char *fmt, ...) {
  va_list ap;
  va_start(ap, fmt);
  char buf[1024], *pbuf = buf;
  mg_vasprintf(&pbuf, sizeof(buf), fmt, ap);
  va_end(ap);

  printf("%s\n", buf);
}

// ...

foo("Hello, %s!", "world"); // Print "Hello, world!

mg_to64()

int64_t mg_to64(struct mg_str str);

Parse 64-bit integer value held by string s.

Parameters:

• str - String to parse

Return value: Parsed value

Usage example:

int64_t val = mg_to64(mg_str("123")); // Val is now 123

mg_aton()

bool mg_aton(struct mg_str str, struct mg_addr *addr);

Parse IP address held by str and store it in addr.

Parameters:

• str - String to parse, for example 1.2.3.4, [::1], 01:02::03
• addr - Pointer to mg_addr string to receive parsed value

Return value: true on success, false otherwise

Usage example:

struct mg_addr addr;
if (mg_aton(mg_str("127.0.0.1"), &addr)) {
  // addr is now binary representation of 127.0.0.1 IP address
}

mg_ntoa()

char *mg_ntoa(const struct mg_addr *addr, char *buf, size_t len);

Stringify IP address ipaddr into a buffer buf, len

Parameters:

• addr - Address to stringify
• buf - Pointer to output buffer
• len - Output buffer size

Return value: buf value

Usage example:

char buf[100];
mg_ntoa(&c->peer, buf, sizeof(buf));

Utility

mg_call()

void mg_call(struct mg_connection *c, int ev, void *ev_data);

Send ev event to c event handler. This function is useful then implementing your own protocol.

Parameters:

• c - Connection to send event
• ev - Event to send
• ev_data - Additional event parameter

Return value: None

Usage example:

// In a timer callback, send MG_EV_USER event to all connections
static void timer_fn(void *arg) {
  struct mg_mgr *mgr = (struct mg_mgr *) arg;
  for (struct mg_connection *c = mgr->conns; c != NULL; c = c->next) {
    mg_call(c, MG_EV_USER, "hi!");
  }
}

mg_error()

void mg_error(struct mg_connection *c, const char *fmt, ...);

Send MG_EV_ERROR to connection event handler with error message formatted using printf semantics.

Parameters:

• c - Connection to send event
• fmt - Format string in printf semantics

Return value: None

Usage example:

mg_error(c, "Operation failed, error code: %d", errno);

mg_md5_init()

void mg_md5_init(mg_md5_ctx *c);

Initialize context for MD5 hashing.

Parameters:

• c - Pointer to mg_md5_ctx structure to initialize

Return value: None

Usage example:

mg_md5_ctx ctx;
mg_md5_init(&ctx);

mg_md5_update()

void mg_md5_update(mg_md5_ctx *c, const unsigned char *data, size_t len);

Hash len bytes of data pointed by data using MD5 algorithm.

Parameters:

• c - MD5 context
• data - Data to hash
• len - Data length

Return value: None

Usage example:

mg_md5_ctx ctx;
// Context initialization
// ...

mg_md5_update(&ctx, "data", 4);       // hash "data" string
mg_md5_update(&ctx, "more data", 9);  // hash "more data" string

mg_md5_final()

void mg_md5_final(mg_md5_ctx *c, unsigned char buf[16]);

Get current MD5 hash for context.

Parameters:

• c - MD5 context
• buf - Pointer to buffer to write MD5 hash value

Return value: None

Usage example:

mg_md5_ctx ctx;
// Context initialization
// ...

unsigned char buf[16];
mg_md5_final(&ctx, buf);  // `buf` is now MD5 hash

mg_sha1_init()

void mg_sha1_init(mg_sha1_ctx *c);

Initialize context for calculating SHA1 hash

Parameters:

• c - pointer to mg_sha1_ctx structure to initialize

Return value: none

Usage example:

mg_sha1_ctx ctx;
mg_sha1_init(&ctx);

mg_sha1_update()

void mg_sha1_update(mg_sha1_ctx *c, const unsigned char *data, size_t len);

Hash len bytes of data using SHA1 algorithm.

Parameters:

• c - Sha1 context
• data - Data to hash
• len - Data length

Return value: None

Usage example:

mg_sha1_ctx ctx;
// Context initialization
// ...

mg_sha1_update(&ctx, "data", 4);      // hash "data" string
mg_sha1_update(&ctx, "more data", 9); // hash "more data" string

mg_sha1_final()

void mg_sha1_final(unsigned char digest[20], mg_sha1_ctx *c);

Get current SHA1 hash for context.

Parameters:

• c - SHA1 context
• digest - Pointer to buffer to receive hash value

Return value: None

Usage example:

mg_sha1_ctx ctx;
// Context initialization
// ...

unsigned char buf[20];
mg_sha1_final(buf, &ctx); // `buf` is now SHA1 hash

mg_base64_update()

int mg_base64_update(unsigned char p, char *out, int pos);

Encode p byte to base64 and write result into out buffer starting with pos position.

Parameters:

• p - Byte to encode
• out - Pointer to buffer to write result
• pos - Position in output buffer to write result

Return value: New position for futher operations

Usage example:

char buf[10];
mg_base64_update((unsigned char)"a", buf, 0); // Encode "a" into base64 and write it to the beginning of buf

mg_base64_final()

int mg_base64_final(char *buf, int pos);

Add base64 finish mark and \0 symbol to buf at pos position.

Parameters:

• buf - Pointer to buffer to write finish mark
• pos - Position to write

Return value: New position for futher operations

char buf[10];
int pos;
// ...

mg_base64_final(buf, pos);

mg_base64_encode()

int mg_base64_encode(const unsigned char *p, int n, char *to);

Encode n bytes data pointed by p using base64 and write result into to.

Parameters:

• p - Pointer to data to encode
• n - Data length
• to - Pointer to buffer to write result

Return value: Written symbols number

Usage example:

char buf[128];
mg_base64_encode((uint8_t *) "abcde", 5, buf); // buf is now YWJjZGU=

mg_base64_decode()

int mg_base64_decode(const char *src, int n, char *dst);

Decode n bytes of base64-ed src and write it to dst.

Parameters:

• src - Data to decode
• n - Data length
• dst - Pointer to output buffer

Return value: Number of written symbols.

Usage example:

char buf[128];
mg_base64_decode("Q2VzYW50YQ==", 12, buf); // buf is now "Cesanta"

mg_file_read()

char *mg_file_read(const char *path, size_t *sizep);

Read file contents into a nul-terminated malloc-ed string. It is a caller's responsibility to free() a returned pointer. If sizep is not NULL, it will return a file size in bytes. Return NULL on error.

Parameters:

• path - Path to file to read
• sizep - Pointer to size_t to receive file size

Return value: File contents, see function description

Usage example:

size_t file_size;
char* data = mg_file_read("myfile.txt", &file_size);
if (data != NULL) {
  // `data` is now pointer to information readen from file and `file_size` is it size.
}
free(data);

mg_file_write()

bool mg_file_write(const char *path, const void *buf, size_t len);

Write data to a file. The write is atomic, i.e. data gets written to a temporary file first, then rename()-ed to a destination file name.

Parameters:

• path - Path to file
• buf - Data to write
• len - Data length

Return value: true if written, false otherwise

Usage example:

char data[] = "Hello, world!";
if(mg_file_write("my_file.txt", data, sizeof(data) - 1)) {
  // File contains "Hello, world!" string
}

mg_file_printf()

int mg_file_printf(const char *path, const char *fmt, ...);

Write into a file path using printf() semantics. This function prints data to a temporary in-memory buffer first, then calls mg_file_write().

Parameters:

• path- ath to file
• fmt - Format string in printf() semantics

Return value: true on success, false otherwise

if (mg_file_printf("my_file.txt", "Hello, %s!", "world") {
  // File contains "Hello, world!" string
}

mg_random()

void mg_random(void *buf, size_t len);

Fill in buffer buf, len with random data. Note: Mongoose uses this function for TLS and some other routines that require RNG (random number generator). It is possible to override a built-in mg_random() by specifying a MG_ENABLE_CUSTOM_RANDOM=1 build preprocessor constant.

Parameters:

• buf - Pointer to buffer to receive random data
• len - Buffer size

Return value: None

Usage example:

char buf[10];
mg_random(buf, sizeof(buf)); // `buf` is now random bytes

mg_ntohs()

uint16_t mg_ntohs(uint16_t net);

Convert uint16_t value to host order.

Parameters:

• net - 16-bit value in network order

Return value: 16-bit value in host order

Usage example:

uint16_t val = mg_ntohs(0x1234);

mg_ntohl()

uint32_t mg_ntohl(uint32_t net);

Convert uint32_t value to host order.

Parameters:

• net - 32-bit value in network order

Return value: 32-bit value in host order

Usage example:

uint32_t val = mg_ntohl(0x12345678);

mg_ntohs()

uint16_t mg_htons(uint16_t h);

Convert uint16_t value to network order.

Parameters:

• h - 16-bit value in host order

Return value: 16-bit value in network order

Usage example:

uint16_t val = mg_htons(0x1234);

mg_htonl()

uint32_t mg_ntohl(uint32_t h);

Convert uint32_t value to network order.

Parameters:

• h - 32-bit value in host order

Return value: 32-bit value in network order

Usage example:

uint32_t val = mg_htonl(0x12345678);

mg_crc32()

uint32_t mg_crc32(uint32_t crc, const char *buf, size_t len);

Calculate CRC32 checksum for a given buffer. An initial crc value should be 0.

Parameters:

• crc - Initial crc value
• buf - Data to calculate CRC32
• len - Data size

Return value: Calculated CRC32 checksum

Usage example:

char data[] = "hello";
uint32_t crc = mg_crc32(0, data, sizeof(data));

mg_check_ip_acl()

int mg_check_ip_acl(struct mg_str acl, uint32_t remote_ip);

Check IPv4 address remote_ip against the IP ACL acl. Parameters:

Parameters:

• acl - an ACL string, e.g. -0.0.0.0/0,+1.2.3.4
• remote_ip - IPv4 address in network byte order

Return value: 1 if remote_ip is allowed, 0 if not, and <0 if acl is invalid

Usage example:

if (mg_check_ip_acl(mg_str("-0.0.0.0/0,+1.2.3.4"), c->peer.ip) != 1) {
  LOG(LL_INFO, ("NOT ALLOWED!"));
}

mg_url_decode()

int mg_url_decode(const char *s, size_t n, char *to, size_t to_len, int form);

Decode URL-encoded string s and write it into to buffer.

Parameters:

• s - String to encode
• n - String to encode lenght
• to - Pointer to output buffer
• to_len - Output buffer size
• form - If non-zero, then + is decoded as whitespace.

Return value: Decoded bytes count or negative value on error

Usage example:

char url[] = "eexample.org%2Ftest";
char buf[1024];
mg_url_encode(url, sizeof(url) - 1, buf, sizeof(buf), 0); // buf is now "example.org/test"

mg_url_encode

size_t mg_url_encode(const char *s, size_t n, char *buf, size_t len);

Encode s string to URL-encoding and write encoded string into buf.

Parameters:

• s - String to encode
• n - String to encode length
• buf - Output buffer
• len - Output buffer size

Return value: Number of characters written to buf

Usage example:

char url[] = "example.org/test";
char buf[1024];
mg_url_encode(url, sizeof(url) - 1, buf, sizeof(buf)); // buf is now "example.org%2Ftest"

IO Buffers

IO buffer, described by the struct mg_iobuf, is a simple data structure that inserts or deletes chunks of data at arbitrary offsets and grows/shrinks automatically.

struct mg_iobuf

struct mg_iobuf {
  unsigned char *buf;  // Pointer to stored data
  size_t size;         // Total size available
  size_t len;          // Current number of bytes
};

Generic IO buffer. The size specifies an allocation size of the data pointed by buf, and len specifies number of bytes currently stored.

mg_iobuf_init()

int mg_iobuf_init(struct mg_iobuf *io, size_t size);

Initialize IO buffer, allocate size bytes.

Parameters:

• io - Pointer to mg_iobuf structure to initialize
• size - Amount of bytes to allocate

Return value: 1 on success, 0 on allocation failure

Usage example:

struct mg_iobuf io;
if (mg_iobuf_init(&io)) {
  // io successfully initialized
}

mg_iobuf_resize()

int mg_iobuf_resize(struct mg_iobuf *io, size_t size);

Resize IO buffer, set the new size to size. The io->buf pointer could change after this, for example if the buffer grows. If size is 0, then the io->buf is freed and set to NULL, and both size and len are set to 0.

Parameters:

• io - iobuf to resize
• size - New size

Return value: 1 on success, 0 on allocation failure

Usage example:

struct mg_iobuf io;
// IO buffer initialization
// ...

if (mg_iobuf_resize(&io, 1024)) {
  // New io size is 1024 bytes
}

mg_iobuf_free()

void mg_iobuf_free(struct mg_iobuf *io);

Free memory pointed by io->buf and set to NULL. Both size and len are set to 0.

Parameters:

• io - iobuf to free

Return value: None

Usage example:

struct mg_iobuf io;
// IO buffer initialization
// ...

// Time to cleanup
mg_iobuf_free(&io);

mg_iobuf_add()

size_t mg_iobuf_add(struct mg_iobuf *io, size_t offset, const void *buf, size_t len, size_t align);

Insert data buffer buf, len at offset offset. The iobuf is expanded if required. The resulting io->size is always aligned to the align byte boundary; therefore, to avoid memory fragmentation and frequent reallocations, set align to a higher value.

Parameters:

• io - iobuf to add data
• offset - Offset to add data
• buf - Data to add
• len - Data lenth
• align - Align boundary

Return value: new io len

Usage example:

struct mg_iobuf io;
mg_iobuf_init(&io, 0);               // Empty buffer
mg_iobuf_add(&io, 0, "hi", 2, 512);  // io->len is 2, io->size is 512

mg_iobuf_del()

size_t mg_iobuf_del(struct mg_iobuf *io, size_t offset, size_t len);

Delete len bytes starting from offset, and shift the remaining bytes. If len is greater than io->len, nothing happens, so such call is silently ignored.

Parameters:

• io - iobuf to delete data
• offset - Start offset
• len - Amount of bytes to delete

Return value: New io len

Usage example:

struct mg_iobuf io;
mg_iobuf_init(&io, 0);               // Empty buffer
mg_iobuf_add(&io, 0, "hi", 2, 512);  // io->len is 2, io->size is 512
// ...
mg_iobuf_del(&io, 0, "hi", 2, 512);  // io->len is 0, io->size is still 512

URL

mg_url_port()

unsigned short mg_url_port(const char *url);

Return port for given URL

Parameters:

• url - URL to extract port

Return value: Port for given url or 0 if url doesn't contain port and there isn't default port for url protocol

Usage example:

unsigned short port1 = mg_url_port("htts://myhost.com") // port1 is now 443 (default https port)
unsigned short port2 = mg_url_port("127.0.0.1:567") // port2 is now 567

mg_url_is_ssl()

int mg_url_is_ssl(const char *url);

Check if given URL uses encrypted scheme

Parameters:

• url - URL to check

Return value: 0 is given URL uses encrypted scheme and non-zero otherwise

Usage example:

if (mg_url_is_ssl("https://example.org") == 0) {
  // scheme is encrypted
}

mg_url_host()

struct mg_str mg_url_host(const char *url);

Extract host name from given URL.

Parameters:

• url - a URL string

Return value: host name

Usage example:

struct mg_str a = mg_url_host("https://my.example.org:1234"); // a == "my.example.org"
struct mg_str b = mg_url_host("tcp://[::1]"); // b == "[::1]"

mg_url_user()

struct mg_str mg_url_user(const char *url);

Extract user name from given URL.

Parameters:

• url - URL to extract user name

Return value: User name or empty string if not found

Usage example:

struct mg_str user_name = mg_url_user("https://user@password@my.example.org"); // user_name is now "user"

mg_url_pass()

struct mg_str mg_url_pass(const char *url);

Extract password from given URL.

Parameters:

• url - URL to extract password

Return value: Password or empty string if not found

Usage example:

struct mg_str pwd = mg_url_user("https://user@password@my.example.org"); // pwd is now "password"

mg_url_uri()

const char *mg_url_uri(const char *url);

Extract URI from given URL. Note, that function returns pointer within url; there is no need to free() it explicitly

Parameters:

• url - URL to extract URI

Return value: URI or \ if not found

Usage example:

const char *uri = mg_url_uri("https://example.org/subdir/subsubdir"); // `uri` is now pointer to "subdir/subsubdir"

Logging

Mongoose provides a set of functions and macros for logging. The application can use these functions for its own purposes as well as the rest of Mongoose API.

LOG()

#define LOG(level, args)

General way to log is using LOG macro. LOG prints to log only is MG_ENABLE_LOG macro defined, otherwise is does nothing.

This macro has two arguments: log level and information to log. The second argument is a printf-alike format string.

Log levels defined as:

enum { LL_NONE, LL_ERROR, LL_INFO, LL_DEBUG, LL_VERBOSE_DEBUG };

Parameters:

• level - Log level, see levels above
• args - Information to log

Return value: None

Usage example:

LOG(LL_ERROR, ("Hello %s!", "world"));  // Output "Hello, world"

mg_log_set()

void mg_log_set(const char *spec);

Set Mongoose logging level.

Parameters:

• spec - String, containing log level, can be one of the following values:

• 0 - Disable logging

• 1 - Log errors only

• 2 - Log errors and info messages

• 3 - Log errors, into and debug messages

• 4 - Log everything

Return value: None

It is possible to override log level per source file basis. For example, if there is a file called foo.c, and you'd like to set a global level to 2 (info) but increase log level for file foo.c to debug, then, a spec should look like "2,foo.c=3". There could be several comma-separated overrides.

Usage example:

mg_log_set("2");                  // Set log level to info
mg_log_set("2,foo.c=3,bar.c=0");  // Set log level to info, with overrides

mg_log_set_callback()

void mg_log_set_callback(void (*fn)(const void *, size_t, void *), void *fnd);

By default, LOG writes to standard output stream (aka stdout), but this behaviour can be changes via mg_log_set_callback. This function allows to set callback, which called once mongoose (or host application) calls LOG

Parameters:

• fn - callback function, should be called on logging
• fnd - user parameter to pass to fn

Return value: none

Usage example:

void log_via_printf(const void *buf, size_t len, void *userdata) {
  (void) userdata;
  printf("*.%s", buf, len);
}

// ...
mg_log_set_callback(&log_via_printf, NULL);

Filesystem

FS virtualisation

Mongoose allows to override file i/o operations in order to support different storages, like programmable flash, no-filesystem devices etc. In order to accomplish this, Mongoose provides a struct mg_fs API to specify a custom filesystem. In addition to this, Mongoose provides two built-in APIs - a standard POSIX API, and a "packed FS" API. A packed FS allows to embed a filesystem into the application or firmware binary, described below.

enum { MG_FS_READ = 1, MG_FS_WRITE = 2, MG_FS_DIR = 4 };

// Filesystem API functions
// stat() returns MG_FS_* flags and populates file size and modification time
// list() calls fn() for every directory entry, allowing to list a directory
struct mg_fs {
  int (*stat)(const char *path, size_t *size, time_t *mtime);
  void (*list)(const char *path, void (*fn)(const char *, void *), void *);
  struct mg_fd *(*open)(const char *path, int flags);      // Open file
  void (*close)(struct mg_fd *fd);                         // Close file
  size_t (*read)(void *fd, void *buf, size_t len);         // Read file
  size_t (*write)(void *fd, const void *buf, size_t len);  // Write file
  size_t (*seek)(void *fd, size_t offset);                 // Set file position
};

HTTP server's struct mg_http_serve_opts has a fs pointer which specifies which filesystem to use when serving static files. By default, fs is set to NULL and therefore a standard POSIX API is used. That could be overridden and a packed FS, or any other user-defined custom FS could be used:

struct mg_http_serve_opts opts;
opts.fs = &mg_fs_posix;
mg_http_serve_dir(c, hm, &opts);

Packed filesystem

Packed filesystem allow to "pack" filesystem into single file, for example, into executable or flashable image. This is useful, for example, for implementation of HTTP-server on devices without filesystem.

In order to use packed filesystem do the following:

1. Compile file test\pack.c:

$ cc -o pack pack.c

2. Convert list of files into single .c:

$ ./pack file1.data file2.data > fs.c

3. Build your app with fs.c:

$ cc -o my_app my_app.c fs.c

4. In your application code, you can access files using this function:
   const char *mg_unpack(const char *file_name, size_t *size) or app can also force mg_http_serve_dir function to use packed file system:

struct mg_http_serve_opts opts;
opts.fs = &mg_fs_packed; // Set packed ds as a file system
mg_http_serve_dir(c, hm, &opts);