mirror of https://github.com/cesanta/mongoose.git synced 2024-11-28 13:49:01 +08:00

History

cpq 052b40680d Add TLS to pico-w5500 baremetal example		2023-01-30 21:30:10 +00:00
..
netif	Add Pico dashboard	2023-01-02 16:49:15 -03:00
CMakeLists.txt	Prep for msc	2023-01-21 13:42:25 +00:00
main.c	Add TLS to pico-w5500 baremetal example	2023-01-30 21:30:10 +00:00
Makefile	Simplify build	2023-01-17 13:54:22 -03:00
README.md	Enable test for pico-rndis-dashboard	2023-01-17 14:58:05 -03:00
tusb_config.h	Prep for msc	2023-01-21 13:42:25 +00:00
usb_descriptors.c	Add Pico dashboard	2023-01-02 16:49:15 -03:00

README.md

Device Dashboard via RNDIS on an RP2040

Your headless Raspberry Pi Pico-based hardware can also have a device dashboard on a web browser when you connect it to your computer via USB

Build and run

Clone Mongoose repo, go to this example, and build it:

git clone https://github.com/cesanta/mongoose
cd mongoose/examples/rp2040/pico-rndis-dashboard
make build

This will generate a firmware file: build/firmware.uf2. Reboot your Pico board in bootloader mode, and copy it to the RPI disk.

The device will reboot, register as a USB RNDIS device, and add a network to your computer. Run a browser, and open 192.168.3.1, you should see a device dashboard

Note: USB stdio in the Pico-SDK is done in background with TinyUSB and an interrupt to hide it from the user and periodically call tusb_task(). When we use TinyUSB, that code is removed from the compilation list; so this example uses UART stdio (UART 0) to keep things simple and focused on the RNDIS example. If you want to see the console output, connect an USB-to-UART or a low-voltage-TTL-to-RS-232 adapter to GPIO0