mirror of
https://github.com/cesanta/mongoose.git
synced 2024-12-01 07:59:00 +08:00
41971a95b2
It is also possible to control LED by sending a command:
{"t": 1, "v": 0/1/2}
0/1 = off/on, 2 = toggle
PUBLISHED_FROM=da176b70c4cd356c5d56eca58c2926619748d895
44 lines
1.2 KiB
C
44 lines
1.2 KiB
C
/*
|
|
* Copyright (c) 2014-2016 Cesanta Software Limited
|
|
* All rights reserved
|
|
*/
|
|
|
|
#include "tmp006.h"
|
|
|
|
#include "mongoose.h"
|
|
|
|
#include "i2c_if.h"
|
|
|
|
#define TMP006_REG_SENSOR_VOLTAGE 0x00
|
|
#define TMP006_REG_DIE_TEMP 0x01
|
|
#define TMP006_REG_CONFIG 0x02
|
|
|
|
bool tmp006_init(uint8_t addr, enum tmp006_conversion_rate conv_rate,
|
|
bool drdy_en) {
|
|
unsigned char val[3] = {TMP006_REG_CONFIG, 0x80, 0};
|
|
/* Reset first */
|
|
if (I2C_IF_Write(addr, val, 3, 1) != 0) return false;
|
|
val[1] = 0x70 | (conv_rate << 1) | drdy_en;
|
|
return (I2C_IF_Write(addr, val, 3, 1) == 0);
|
|
}
|
|
|
|
double tmp006_read_sensor_voltage(uint8_t addr) {
|
|
unsigned char reg = TMP006_REG_SENSOR_VOLTAGE;
|
|
unsigned char val[2] = {0, 0};
|
|
int status = I2C_IF_ReadFrom(addr, ®, 1, val, 2);
|
|
if (status < 0) return -1000;
|
|
int voltage = (val[0] << 8) | val[1];
|
|
if (val[0] & 0x80) voltage = -((1 << 16) - voltage);
|
|
return voltage * 0.00015625;
|
|
}
|
|
|
|
double tmp006_read_die_temp(uint8_t addr) {
|
|
unsigned char reg = TMP006_REG_DIE_TEMP;
|
|
unsigned char val[2] = {0, 0};
|
|
int status = I2C_IF_ReadFrom(addr, ®, 1, val, 2);
|
|
if (status < 0) return -1000;
|
|
int temp = (val[0] << 6) | (val[1] >> 2);
|
|
if (val[0] & 0x80) temp = -((1 << 14) - temp);
|
|
return temp / 32.0;
|
|
}
|