mirror of
https://github.com/cesanta/mongoose.git
synced 2024-12-22 23:28:06 +08:00
eaef5bd133
This reverts commit 1a17e17c462bdd4e1d26d8742f8b7087273e04c2. PUBLISHED_FROM=80028de308c9a021955d1425d2bfee8feb85f193
75 lines
2.3 KiB
C
75 lines
2.3 KiB
C
/*
|
|
* Copyright (c) 2014-2016 Cesanta Software Limited
|
|
* All rights reserved
|
|
*/
|
|
|
|
#ifndef CS_MONGOOSE_EXAMPLES_STM32F4_CC3100_STM32F4XX_HAL_MSP_H_
|
|
#define CS_MONGOOSE_EXAMPLES_STM32F4_CC3100_STM32F4XX_HAL_MSP_H_
|
|
|
|
/*
|
|
* Definitions for SPI used to communicate with CC3100
|
|
* All samples in STMCubeF4 use SPI4 for examples
|
|
* We do the same. See README.MD for details.
|
|
*/
|
|
#define SPIx_NUMBER 4
|
|
#define SPIx SPI4
|
|
#define SPIx_CLK_ENABLE() __HAL_RCC_SPI4_CLK_ENABLE()
|
|
#define SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
|
|
#define SPIx_MISO_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
|
|
#define SPIx_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
|
|
#define SPIx_NSS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
|
|
|
|
#define SPIx_FORCE_RESET() __HAL_RCC_SPI4_FORCE_RESET()
|
|
#define SPIx_RELEASE_RESET() __HAL_RCC_SPI4_RELEASE_RESET()
|
|
|
|
#define SPIx_SCK_PIN GPIO_PIN_2
|
|
#define SPIx_SCK_GPIO_PORT GPIOE
|
|
#define SPIx_SCK_AF GPIO_AF5_SPI4
|
|
#define SPIx_MISO_PIN GPIO_PIN_5
|
|
#define SPIx_MISO_GPIO_PORT GPIOE
|
|
#define SPIx_MISO_AF GPIO_AF5_SPI4
|
|
#define SPIx_MOSI_PIN GPIO_PIN_6
|
|
#define SPIx_MOSI_GPIO_PORT GPIOE
|
|
#define SPIx_MOSI_AF GPIO_AF5_SPI4
|
|
|
|
#define SPIx_IRQn SPI4_IRQn
|
|
#define SPIx_IRQHandler SPI4_IRQHandler
|
|
|
|
#define SPI_CS_PIN GPIO_PIN_12
|
|
#define SPI_CS_PORT GPIOB
|
|
|
|
/*
|
|
* CC3100 requires 2 additional pins for communication
|
|
* See http://processors.wiki.ti.com/index.php/CC31xx_SPI_Host_Interface
|
|
* for details
|
|
*/
|
|
|
|
#define MCU_IRQ_PIN GPIO_PIN_0
|
|
#define MCU_IRQ_PORT GPIOA
|
|
#define MCU_nHIB_PORT GPIOB
|
|
#define MCU_nHIB_PIN GPIO_PIN_0
|
|
|
|
/*
|
|
* Definitions used for debug uart.
|
|
* By default we use USART1, and this allows to connect serial port monitor
|
|
* to dedicated pin (PA9) and to ST-LINK port (/dev/ttyACM0 in Linux)
|
|
* See README.MD for details.
|
|
*/
|
|
#define USARTx USART1
|
|
#define USART_SPEED 115200
|
|
#define USARTx_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE();
|
|
#define USARTx_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define USARTx_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
|
|
#define USARTx_FORCE_RESET() __HAL_RCC_USART1_FORCE_RESET()
|
|
#define USARTx_RELEASE_RESET() __HAL_RCC_USART1_RELEASE_RESET()
|
|
|
|
#define USARTx_TX_PIN GPIO_PIN_9
|
|
#define USARTx_TX_GPIO_PORT GPIOA
|
|
#define USARTx_TX_AF GPIO_AF7_USART1
|
|
#define USARTx_RX_PIN GPIO_PIN_10
|
|
#define USARTx_RX_GPIO_PORT GPIOA
|
|
#define USARTx_RX_AF GPIO_AF7_USART1
|
|
|
|
#endif /* CS_MONGOOSE_EXAMPLES_STM32F4_CC3100_STM32F4XX_HAL_MSP_H_ */
|