*) Change: the "bl" and "af" parameters of the "listen" directive was
renamed to the "backlog" and "accept_filter".
*) Feature: the "rcvbuf" and "sndbuf" parameters of the "listen"
directive.
*) Change: the "$msec" log parameter does not require now the
additional the gettimeofday() system call.
*) Feature: the -t switch now tests the "listen" directives.
*) Bugfix: if the invalid address was specified in the "listen"
directive, then after the -HUP signal nginx left an open socket in
the CLOSED state.
*) Bugfix: the mime type may be incorrectly set to default value for
index file with variable in the name; the bug had appeared in 0.3.0.
*) Feature: the "timer_resolution" directive.
*) Feature: the millisecond "$upstream_response_time" log parameter.
*) Bugfix: a temporary file with client request body now is removed
just after the response header was transferred to a client.
*) Bugfix: OpenSSL 0.9.6 compatibility.
*) Bugfix: the SSL certificate and key file paths could not be relative.
*) Bugfix: the "ssl_prefer_server_ciphers" directive did not work in
the ngx_imap_ssl_module.
*) Bugfix: the "ssl_protocols" directive allowed to specify the single
protocol only.
*) Feature: the Sun Studio 10 C compiler support.
*) Feature: the "proxy_upstream_max_fails",
"proxy_upstream_fail_timeout", "fastcgi_upstream_max_fails", and
"fastcgi_upstream_fail_timeout" directives.
*) Bugfix: the segmentation fault occurred when the signal queue
overflowed if the "rtsig" method was used; the bug had appeared in
0.2.0.
*) Change: correct handling of the "\\", "\"", "\'", and "\$" pairs in
SSI.
*) Change: while using load-balancing the time before the failed
backend retry was decreased from 60 to 10 seconds.
*) Change: the "proxy_pass_unparsed_uri" was canceled, the original URI
now passed, if the URI part is omitted in "proxy_pass" directive.
*) Feature: the "error_page" directive supports redirects and allows
more flexible to change an error code.
*) Change: the charset in the "Content-Type" header line now is ignored
in proxied subrequests.
*) Bugfix: if the URI was changed in the "if" block and request did not
found new configuration, then the ngx_http_rewrite_module rules ran
again.
*) Bugfix: if the "set" directive set the ngx_http_geo_module variable
in some configuration part, the this variable was not available in
other configuration parts and the "using uninitialized variable"
error was occurred; the bug had appeared in 0.2.2.
*) Change: the duplicate value of the ngx_http_geo_module variable now
causes the warning and changes old value.
*) Feature: the ngx_http_ssi_module supports the "set" command.
*) Feature: the ngx_http_ssi_module supports the "file" parameter in
the "include" command.
*) Feature: the ngx_http_ssi_module supports the variable value
substitutions in expressions of the "if" command.
*) Feature: the ngx_http_ssi_module supports "$var=text", "$var!=text",
"$var=/text/", and "$var!=/text/" expressions in the "if" command.
*) Bugfix: in proxying location without trailing slash; the bug had
appeared in 0.1.44.
*) Bugfix: the segmentation fault may occurred if the "rtsig" method
was used; the bug had appeared in 0.2.0.
*) Feature: the "config errmsg" command of the ngx_http_ssi_module.
*) Change: the ngx_http_geo_module variables can be overridden by the
"set" directive.
*) Feature: the "ssl_protocols" and "ssl_prefer_server_ciphers"
directives of the ngx_http_ssl_module and ngx_imap_ssl_module.
*) Bugfix: the ngx_http_autoindex_module did not show correctly the
long file names;
*) Bugfix: the ngx_http_autoindex_module now do not show the files
starting by dot.
*) Bugfix: if the SSL handshake failed then another connection may be
closed too.
Thanks to Rob Mueller.
*) Bugfix: the export versions of MSIE 5.x could not connect via HTTPS.
*) The pid-file names used during online upgrade was changed and now is
not required a manual rename operation. The old master process adds
the ".oldbin" suffix to its pid-file and executes a new binary file.
The new master process creates usual pid-file without the ".newbin"
suffix. If the master process exits, then old master process renames
back its pid-file with the ".oldbin" suffix to the pid-file without
suffix.
*) Change: the "worker_connections" directive, new name of the
"connections" directive; now the directive specifies maximum number
of connections, but not maximum socket descriptor number.
*) Feature: SSL supports the session cache inside one worker process.
*) Feature: the "satisfy_any" directive.
*) Change: the ngx_http_access_module and ngx_http_auth_basic_module do
not run for subrequests.
*) Feature: the "worker_rlimit_nofile" and "worker_rlimit_sigpending"
directives.
*) Bugfix: if all backend using in load-balancing failed after one
error, then nginx did not try do connect to them during 60 seconds.
*) Bugfix: in IMAP/POP3 command argument parsing.
Thanks to Rob Mueller.
*) Bugfix: errors while using SSL in IMAP/POP3 proxy.
*) Bugfix: errors while using SSI and gzipping.
*) Bugfix: the "Expires" and "Cache-Control" header lines were omitted
from the 304 responses.
Thanks to Alexandr Kukushkin.
*) Change: the "ssl_engine" directive was canceled in the
ngx_http_ssl_module and now is introduced at global level.
*) Bugfix: the responses with SSI subrequests did not transferred via
SSL connection.
*) Various bug fixes in the IMAP/POP3 proxy.
*) Feature: the IMAP/POP3 proxy supports SSL.
*) Feature: the "proxy_timeout" directive of the ngx_imap_proxy_module.
*) Feature: the "userid_mark" directive.
*) Feature: the $remote_user variable value is determined independently
of authorization use.
*) Feature: the listen(2) backlog in the "listen" directive can be
changed using the -HUP signal.
*) Feature: the geo2nginx.pl script was added to contrib.
*) Change: the FastCGI parameters with the empty values now are passed
to a server.
*) Bugfix: the segmentation fault occurred or the worker process may
got caught in an endless loop if the proxied or FastCGI server sent
the "Cache-Control" header line and the "expires" directive was
used; in the proxied mode the the bug had appeared in 0.1.29.
*) Bugfix: if the request URI had a zero length after the processing in
the ngx_http_proxy_module, then the segmentation fault or bus error
occurred in the ngx_http_proxy_module.
*) Bugfix: the "limit_rate" directive did not work inside the "if"
block; the bug had appeared in 0.1.38.
*) Bugfix: if a client sent too long header line, then the request
information did not logged in the error log.
*) Bugfix: the "Set-Cookie" header line was not transferred when the
"X-Accel-Redirect" was used; the bug had appeared in 0.1.39.
*) Bugfix: the "Content-Disposition" header line was not transferred
when the "X-Accel-Redirect" was used.
*) Bugfix: the master process did not close the listen socket on the
SIGQUIT signal.
*) Bugfix: after on-line upgrade on Linux and Solaris the process name
became shorter in the "ps" command.
*) The changes in the ngx_http_charset_module: the "default_charset"
directive was canceled; the "charset" directive sets the response
charset; the "source_charset" directive sets the source charset only.
*) Bugfix: the backend "WWW-Authenticate" header line did not
transferred while the 401 response code redirecting.
*) Bugfix: the ngx_http_proxy_module and ngx_http_fastcgi_module may
close a connection before anything was transferred to a client; the
bug had appeared in 0.1.38.
*) Workaround: the Linux glibc crypt_r() initialization bug.
*) Bugfix: the ngx_http_ssi_module did not support the relative URI in
the "include virtual" command.
*) Bugfix: if the backend response had the "Location" header line and
nginx should not rewrite this line, then the 500 code response body
was transferred; the bug had appeared in 0.1.29.
*) Bugfix: some directives of the ngx_http_proxy_module and
ngx_http_fastcgi_module were not inherited from the server to the
location level; the bug had appeared in 0.1.29.
*) Bugfix: the ngx_http_ssl_module did not support the certificate
chain.
*) Bugfix: the ngx_http_autoindex_module did not show correctly the
long file names; the bug had appeared in 0.1.38.
*) Bugfixes in IMAP/POP3 proxy in interaction with a backend at the
login state.
*) Feature: the "limit_rate" directive is supported in in proxy and
FastCGI mode.
*) Feature: the "X-Accel-Limit-Rate" response header line is supported
in proxy and FastCGI mode.
*) Feature: the "break" directive.
*) Feature: the "log_not_found" directive.
*) Bugfix: the response status code was not changed when request was
redirected by the ""X-Accel-Redirect" header line.
*) Bugfix: the variables set by the "set" directive could not be used
in SSI.
*) Bugfix: the segmentation fault may occurred if the SSI page has more
than one remote subrequest.
*) Bugfix: nginx treated the backend response as invalid if the status
line in the header was transferred in two packets; the bug had
appeared in 0.1.29.
*) Feature: the "ssi_types" directive.
*) Feature: the "autoindex_exact_size" directive.
*) Bugfix: the ngx_http_autoindex_module did not support the long file
names in UTF-8.
*) Feature: the IMAP/POP3 proxy.
*) Change: now the "\n" is added to the end of the "nginx.pid" file.
*) Bugfix: the responses may be transferred not completely, if many
parts or the big parts were included by SSI.
*) Bugfix: if all backends had returned the 404 reponse and the
"http_404" parameter of the "proxy_next_upstream" or
"fastcgi_next_upstream" directives was used, then nginx started to
request all backends again.
*) Change: if the request header has duplicate the "Host",
"Connection", "Content-Length", or "Authorization" lines, then nginx
now returns the 400 error.
*) Change: the "post_accept_timeout" directive was canceled.
*) Feature: the "default", "af=", "bl=", "deferred", and "bind"
parameters of the "listen" directive.
*) Feature: the FreeBSD accept filters support.
*) Feature: the Linux TCP_DEFER_ACCEPT support.
*) Bugfix: the ngx_http_autoindex_module did not support the file names
in UTF-8.
*) Bugfix: the new log file can be rotated by the -USR1 signal only if
the reconfiguration by the -HUP signal was made twice.
*) Feature: the "working_directory" directive.
*) Feature: the "port_in_redirect" directive.
*) Bugfix: the segmentation fault was occurred if the backend response
header was in several packets; the bug had appeared in 0.1.29.
*) Bugfix: if more than 10 servers were configured or some server did
not use the "listen" directive, then the segmentation fault was
occurred on the start.
*) Bugfix: the segmentation fault might occur if the response was
bigger than the temporary file.
*) Bugfix: nginx returned the 400 response on requests like
"GET http://www.domain.com/uri HTTP/1.0"; the bug had appeared in
0.1.28.
*) Bugfix: the worker process may got caught in an endless loop if the
big response part were include by SSI.
*) Bugfix: the variables set by the "set" directive were not available
in SSI.
*) Feature: the "autoindex_localtime" directive.
*) Bugfix: the empty value of the "proxy_set_header" directive forbids
the client request header line passing.
*) Bugfix: nginx could not be built with the --without-pcre parameter;
the bug had appeared in 0.1.29.
*) Bugfix: 3, 4, 7, and 8 the "proxy_set_header" directives in one
level cause the bus fault on start up.
*) Bugfix: the HTTP protocol was specified in the HTTPS redirects.
*) Bugfix: if the "rewrite" directive used the captures inside the "if"
directive, then the 500 error code was returned.
*) Bugfix: the arguments were omitted in the redirects, issued by the
"rewrite" directive; the bug had appeared in 0.1.29.
*) Feature: the "if" directive supports the captures in regular
expressions.
*) Feature: the "set" directive supports the variables and the captures
of regular expressions.
*) Feature: the "X-Accel-Redirect" response header line is supported in
proxy and FastCGI mode.
