According to quic-transport draft 29, section 21.12.1.1:
Prior to validation, endpoints are limited in what they are able to
send. During the handshake, a server cannot send more than three
times the data it receives; clients that initiate new connections or
migrate to a new network path are limited.
The ngx_quic_queue_frame() functions puts a frame into send queue and
schedules a push timer to actually send data.
The patch adds tracking for data amount in the queue and sends data
immediately if amount of data exceeds limit.
Instead of timer-based retransmissions with constant packet lifetime,
this patch implements ack-based loss detection and probe timeout
for the cases, when no ack is received, according to the quic-recovery
draft 29.
The c->quic->retransmit timer is now called "pto".
The ngx_quic_retransmit() function is renamed to "ngx_quic_detect_lost()".
This is a preparation for the following patches.
According to the quic-recovery 29, Section 5: Estimating the Round-Trip Time.
Currently, integer arithmetics is used, which loses sub-millisecond accuracy.
The slice filter allows ranges for the response by setting the r->allow_ranges
flag, which enables the range filter. If the range was not requested, the
range filter adds an Accept-Ranges header to the response to signal the
support for ranges.
Previously, if an Accept-Ranges header was already present in the first slice
response, client received two copies of this header. Now, the slice filter
removes the Accept-Ranges header from the response prior to setting the
r->allow_ranges flag.
As long as the "Content-Length" header is given, we now make sure
it exactly matches the size of the response. If it doesn't,
the response is considered malformed and must not be forwarded
(https://tools.ietf.org/html/rfc7540#section-8.1.2.6). While it
is not really possible to "not forward" the response which is already
being forwarded, we generate an error instead, which is the closest
equivalent.
Previous behaviour was to pass everything to the client, but this
seems to be suboptimal and causes issues (ticket #1695). Also this
directly contradicts HTTP/2 specification requirements.
Note that the new behaviour for the gRPC proxy is more strict than that
applied in other variants of proxying. This is intentional, as HTTP/2
specification requires us to do so, while in other types of proxying
malformed responses from backends are well known and historically
tolerated.
Previous behaviour was to pass everything to the client, but this
seems to be suboptimal and causes issues (ticket #1695). Fix is to
drop extra data instead, as it naturally happens in most clients.
Additionally, we now also issue a warning if the response is too
short, and make sure the fact it is truncated is propagated to the
client. The u->error flag is introduced to make it possible to
propagate the error to the client in case of unbuffered proxying.
For responses to HEAD requests there is an exception: we do allow
both responses without body and responses with body matching the
Content-Length header.
Previous behaviour was to pass everything to the client, but this
seems to be suboptimal and causes issues (ticket #1695). Fix is to
drop extra data instead, as it naturally happens in most clients.
This change covers generic buffered and unbuffered filters as used
in the scgi and uwsgi modules. Appropriate input filter init
handlers are provided by the scgi and uwsgi modules to set corresponding
lengths.
Note that for responses to HEAD requests there is an exception:
we do allow any response length. This is because responses to HEAD
requests might be actual full responses, and it is up to nginx
to remove the response body. If caching is enabled, only full
responses matching the Content-Length header will be cached
(see b779728b180c).
Previously, additional data after final chunk was either ignored
(in the same buffer, or during unbuffered proxying) or sent to the
client (in the next buffer already if it was already read from the
socket). Now additional data are properly detected and ignored
in all cases. Additionally, a warning is now logged and keepalive
is disabled in the connection.
Previous behaviour was to pass everything to the client, but this
seems to be suboptimal and causes issues (ticket #1695). Fix is to
drop extra data instead, as it naturally happens in most clients.
If a memcached response was followed by a correct trailer, and then
the NUL character followed by some extra data - this was accepted by
the trailer checking code. This in turn resulted in ctx->rest underflow
and caused negative size buffer on the next reading from the upstream,
followed by the "negative size buf in writer" alert.
Fix is to always check for too long responses, so a correct trailer cannot
be followed by extra data.
After sending the GOAWAY frame, a connection is now closed using
the lingering close mechanism.
This allows for the reliable delivery of the GOAWAY frames, while
also fixing connection resets observed when http2_max_requests is
reached (ticket #1250), or with graceful shutdown (ticket #1544),
when some additional data from the client is received on a fully
closed connection.
For HTTP/2, the settings lingering_close, lingering_timeout, and
lingering_time are taken from the "server" level.
Previously, the expression (ch & 0x7f) was promoted to a signed integer.
Depending on the platform, the size of this integer could be less than 8 bytes,
leading to overflow when handling the higher bits of the result. Also, sign
bit of this integer could be replicated when adding to the 64-bit st->value.
Previously errors led only to closing streams.
To simplify closing QUIC connection from a QUIC stream context, new macro
ngx_http_v3_finalize_connection() is introduced. It calls
ngx_quic_finalize_connection() for the parent connection.
The function finalizes QUIC connection with an application protocol error
code and sends a CONNECTION_CLOSE frame with type=0x1d.
Also, renamed NGX_QUIC_FT_CONNECTION_CLOSE2 to NGX_QUIC_FT_CONNECTION_CLOSE_APP.
Previously dynamic table was not functional because of zero limit on its size
set by default. Now the following changes enable it:
- new directives to set SETTINGS_QPACK_MAX_TABLE_CAPACITY and
SETTINGS_QPACK_BLOCKED_STREAMS
- send settings with SETTINGS_QPACK_MAX_TABLE_CAPACITY and
SETTINGS_QPACK_BLOCKED_STREAMS to the client
- send Insert Count Increment to the client
- send Header Acknowledgement to the client
- evict old dynamic table entries on overflow
- decode Required Insert Count from client
- block stream if Required Insert Count is not reached
Using SSL_CTX_set_verify(SSL_VERIFY_PEER) implies that OpenSSL will
send a certificate request during an SSL handshake, leading to unexpected
certificate requests from browsers as long as there are any client
certificates installed. Given that ngx_ssl_trusted_certificate()
is called unconditionally by the ngx_http_ssl_module, this affected
all HTTPS servers. Broken by 699f6e55bbb4 (not released yet).
Fix is to set verify callback in the ngx_ssl_trusted_certificate() function
without changing the verify mode.
Client streams may send literal strings which are now limited in size by the
new directive. The default value is 4096.
The directive is similar to HTTP/2 directive http2_max_field_size.
