*) Bugfix: the segmentation fault occurred when the signal queue
overflowed if the "rtsig" method was used; the bug had appeared in
0.2.0.
*) Change: correct handling of the "\\", "\"", "\'", and "\$" pairs in
SSI.
*) The pid-file names used during online upgrade was changed and now is
not required a manual rename operation. The old master process adds
the ".oldbin" suffix to its pid-file and executes a new binary file.
The new master process creates usual pid-file without the ".newbin"
suffix. If the master process exits, then old master process renames
back its pid-file with the ".oldbin" suffix to the pid-file without
suffix.
*) Change: the "worker_connections" directive, new name of the
"connections" directive; now the directive specifies maximum number
of connections, but not maximum socket descriptor number.
*) Feature: SSL supports the session cache inside one worker process.
*) Feature: the "satisfy_any" directive.
*) Change: the ngx_http_access_module and ngx_http_auth_basic_module do
not run for subrequests.
*) Feature: the "worker_rlimit_nofile" and "worker_rlimit_sigpending"
directives.
*) Bugfix: if all backend using in load-balancing failed after one
error, then nginx did not try do connect to them during 60 seconds.
*) Bugfix: in IMAP/POP3 command argument parsing.
Thanks to Rob Mueller.
*) Bugfix: errors while using SSL in IMAP/POP3 proxy.
*) Bugfix: errors while using SSI and gzipping.
*) Bugfix: the "Expires" and "Cache-Control" header lines were omitted
from the 304 responses.
Thanks to Alexandr Kukushkin.
*) Feature: the IMAP/POP3 proxy supports SSL.
*) Feature: the "proxy_timeout" directive of the ngx_imap_proxy_module.
*) Feature: the "userid_mark" directive.
*) Feature: the $remote_user variable value is determined independently
of authorization use.
*) Bugfix: if a client sent too long header line, then the request
information did not logged in the error log.
*) Bugfix: the "Set-Cookie" header line was not transferred when the
"X-Accel-Redirect" was used; the bug had appeared in 0.1.39.
*) Bugfix: the "Content-Disposition" header line was not transferred
when the "X-Accel-Redirect" was used.
*) Bugfix: the master process did not close the listen socket on the
SIGQUIT signal.
*) Bugfix: after on-line upgrade on Linux and Solaris the process name
became shorter in the "ps" command.
*) Feature: the ngx_http_ssi_module supports "include virtual" command.
*) Feature: the ngx_http_ssi_module supports the condition command like
'if expr="$NAME"' and "else" and "endif" commands. Only one nested
level is supported.
*) Feature: the ngx_http_ssi_module supports the DATE_LOCAL and
DATE_GMT variables and "config timefmt" command.
*) Feature: the "ssi_ignore_recycled_buffers" directive.
*) Bugfix: the "echo" command did not show the default value for the
empty QUERY_STRING variable.
*) Change: the ngx_http_proxy_module was rewritten.
*) Feature: the "proxy_redirect", "proxy_pass_request_headers",
"proxy_pass_request_body", and "proxy_method" directives.
*) Feature: the "proxy_set_header" directive. The "proxy_x_var" was
canceled and must be replaced with the proxy_set_header directive.
*) Change: the "proxy_preserve_host" is canceled and must be replaced
with the "proxy_set_header Host $host" and the "proxy_redirect off"
directives, the "proxy_set_header Host $host:$proxy_port" directive
and the appropriate proxy_redirect directives.
*) Change: the "proxy_set_x_real_ip" is canceled and must be replaced
with the "proxy_set_header X-Real-IP $remote_addr" directive.
*) Change: the "proxy_add_x_forwarded_for" is canceled and must be
replaced with
the "proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for"
directive.
*) Change: the "proxy_set_x_url" is canceled and must be replaced with
the "proxy_set_header X-URL http://$host:$server_port$request_uri"
directive.
*) Feature: the "fastcgi_param" directive.
*) Change: the "fastcgi_root", "fastcgi_set_var" and "fastcgi_params"
directive are canceled and must be replaced with the fastcgi_param
directives.
*) Feature: the "index" directive can use the variables.
*) Feature: the "index" directive can be used at http and server levels.
*) Change: the last index only in the "index" directive can be absolute.
*) Feature: the "rewrite" directive can use the variables.
*) Feature: the "internal" directive.
*) Feature: the CONTENT_LENGTH, CONTENT_TYPE, REMOTE_PORT, SERVER_ADDR,
SERVER_PORT, SERVER_PROTOCOL, DOCUMENT_ROOT, SERVER_NAME,
REQUEST_METHOD, REQUEST_URI, and REMOTE_USER variables.
*) Change: nginx now passes the invalid lines in a client request
headers or a backend response header.
*) Bugfix: if the backend did not transfer response for a long time and
the "send_timeout" was less than "proxy_read_timeout", then nginx
returned the 408 response.
*) Bugfix: the segmentation fault was occurred if the backend sent an
invalid line in response header; the bug had appeared in 0.1.26.
*) Bugfix: the segmentation fault may occurred in FastCGI fault
tolerance configuration.
*) Bugfix: the "expires" directive did not remove the previous
"Expires" and "Cache-Control" headers.
*) Bugfix: nginx did not take into account trailing dot in "Host"
header line.
*) Bugfix: the ngx_http_auth_module did not work under Linux.
*) Bugfix: the rewrite directive worked incorrectly, if the arguments
were in a request.
*) Bugfix: nginx could not be built on MacOS X.
*) Bugfix: the ngx_http_stub_status_module showed incorrect statistics
if "rtsig" method was used or if several worker process ran on SMP.
*) Bugfix: nginx could not be built by the icc compiler on Linux or if
the zlib-1.2.x library was building from sources.
*) Bugfix: nginx could not be built on NetBSD 2.0.
*) Bugfix: on Solaris and Linux there may be too many "recvmsg()
returned not enough data" alerts.
*) Bugfix: there were the "writev() failed (22: Invalid argument)"
errors on Solaris in proxy mode without sendfile. On other platforms
that do not support sendfile at all the process got caught in an
endless loop.
*) Bugfix: segmentation fault on Solaris in proxy mode and using
sendfile.
*) Bugfix: segmentation fault on Solaris.
*) Bugfix: on-line upgrade did not work on Linux.
*) Bugfix: the ngx_http_autoindex_module module did not escape the
spaces, the quotes, and the percent signs in the directory listing.
*) Change: the decrease of the copy operations.
*) Feature: the userid_p3p directive.
*) Feature: the --user=USER, --group=GROUP, and --with-ld-opt=OPTIONS
options in configure.
*) Feature: the server_name directive supports *.domain.tld.
*) Bugfix: the portability improvements.
*) Bugfix: if configuration file was set in command line, the
reconfiguration was impossible; the bug had appeared in 0.1.1.
*) Bugfix: proxy module may get caught in an endless loop when sendfile
is not used.
*) Bugfix: with sendfile the response was not recoded according to the
charset module directives; the bug had appeared in 0.1.1.
*) Bugfix: very seldom bug in the kqueue processing.
*) Bugfix: the gzip module compressed the proxied responses that was
already compressed.
*) Feature: the gzip_types directive.
*) Feature: the tcp_nodelay directive.
*) Feature: the send_lowat directive is working not only on OSes that
support kqueue NOTE_LOWAT, but also on OSes that support SO_SNDLOWAT.
*) Feature: the setproctitle() emulation for Linux and Solaris.
*) Bugfix: the "Location" header rewrite bug fixed while the proxying.
*) Bugfix: the ngx_http_chunked_module module may get caught in an
endless loop.
*) Bugfix: the /dev/poll module bugs fixed.
*) Bugfix: the responses were corrupted when the temporary files were
used while the proxying.
*) Bugfix: the unescaped requests were passed to the backend.
*) Bugfix: while the build configuration on Linux 2.4 the
--with-poll_module parameter was required.
