If cache was bypassed with proxy_cache_bypass, cache-controlling headers
(Cache-Control, Expires) wasn't considered and response was cached even
if it was actually non-cacheable.
Patch by John Ferlito.
Configuration with duplicate upstream blocks defined after first use, i.e.
like
server {
...
location / {
proxy_pass http://backend;
}
}
upstream backend { ... }
upstream backend { ... }
now correctly results in "duplicate upstream" error.
Additionally, upstream blocks defined after first use now handle various
server directive parameters ("weight", "max_fails", etc.). Previously
configuration like
server {
...
location / {
proxy_pass http://backend;
}
}
upstream backend {
server 127.0.0.1 max_fails=5;
}
incorrectly resulted in "invalid parameter "max_fails=5"" error.
For normal cached responses ngx_http_cache_send() sends last buffer and then
request finalized via ngx_http_finalize_request() call, i.e. everything is
ok.
But for stale responses (i.e. when upstream died, but we have something in
cache) the same ngx_http_cache_send() sends last buffer, but then in
ngx_http_upstream_finalize_request() another last buffer is send. This
causes duplicate final chunk to appear if chunked encoding is used (and
resulting problems with keepalive connections and so on).
Fix this by not sending in ngx_http_upstream_finalize_request()
another last buffer if we know response was from cache.
The special case in question leads to replies without body in
configuration like
location / { error_page 404 /zero; return 404; }
location /zero { return 204; }
while replies with empty body are expected per protocol specs.
Correct one will look like
if (status == NGX_HTTP_NO_CONTENT) {
rc = ngx_http_send_header(r);
if (rc == NGX_ERROR || r->header_only) {
return rc;
}
return ngx_http_send_special(r, NGX_HTTP_LAST);
}
though it looks like it's better to drop this special case at all.
Big POST (not fully preread) to a
location / {
return 202;
}
resulted in incorrect behaviour due to "return" code path not calling
ngx_http_discard_request_body(). The same applies to all "return" used
with 2xx/3xx codes except 201 and 204, and to all "return ... text" uses.
Fix is to add ngx_http_discard_request_body() call to ngx_http_send_response()
function where it looks appropriate. Discard body call from emtpy gif module
removed as it's now redundant.
Reported by Pyry Hakulinen, see
http://mailman.nginx.org/pipermail/nginx/2011-August/028503.html
Test case:
location / {
error_page 405 /nope;
return 405;
}
location /nope {
return 200;
}
This is expected to return 405 with empty body, but in 0.8.42+ will return
builtin 405 error page as well (though not counted in Content-Length, thus
breaking protocol).
Fix is to use status provided by rewrite script execution in case
it's less than NGX_HTTP_BAD_REQUEST even if r->error_status set. This
check is in line with one in ngx_http_script_return_code().
Note that this patch also changes behaviour for "return 302 ..." and
"rewrite ... redirect" used as error handler. E.g.
location / {
error_page 405 /redirect;
return 405;
}
location /redirect {
rewrite ^ http://example.com/;
}
will actually return redirect to "http://example.com/" instead of builtin 405
error page with meaningless Location header. This looks like correct change
and it's in line with what happens on e.g. directory redirects in error
handlers.
Replies with 201 code contain body, and we should clearly indicate it's
empty if it's empty. Before 0.8.32 chunked was explicitly disabled for
201 replies and as a result empty body was indicated by connection close
(not perfect, but worked). Since 0.8.32 chunked is enabled, and this
causes incorrect responses from dav module when HTTP/1.1 is used: with
"Transfer-Encoding: chunked" but no chunks at all.
Fix is to actually return empty body in special response handler instead
of abusing r->header_only flag.
See here for initial report:
http://mailman.nginx.org/pipermail/nginx-ru/2010-October/037535.html
This fixes crashes observed with some 3rd party balancer modules. Standard
balancer modules (round-robin and ip hash) explicitly set pc->connection
(aka u->peer.connection) to NULL and aren't affected.
If client closed connection in ngx_event_pipe_write_to_downstream(), buffers
in the "out" chain were lost. This caused cpu hog if all available buffers
were in the "out" chain. Fix is to call ngx_chain_update_chains() before
checking return code of output filter to avoid loosing buffers in the "out"
chain.
Note that this situation (all available buffers in the "out" chain) isn't
normal, it should be prevented by busy buffers limit. Though right now it
may happen with complex protocols like fastcgi. This should be addressed
separately.
The default value is 32 AIO simultaneous requests per worker. Previously
they were hardcoded to 1024, and it was too large, since Linux allocated
them early on io_setup(), but not on request itself. So with default value
of /proc/sys/fs/aio-max-nr equal to 65536 only 64 worker processes could
be run simultaneously. 32 AIO requests are enough for modern disks even if
server runs only 1 worker.
and "chunked_transfer_encoding" directives, to be in line with all
directives taking a boolean argument. Both flags will ensure that
a directive takes one argument.
syscall(2) uses usual libc convention, it returns -1 on error and
sets errno. Obsolete _syscall(2) returns negative value of error.
Thanks to Hagai Avrahami.
By default follow the old behaviour, i.e. FASTCGI_KEEP_CONN flag isn't set
in request and application is responsible for closing connection once request
is done. To keep connections alive fastcgi_keep_conn must be activated.
As long as ngx_event_pipe() has more data read from upstream than specified
in p->length it's passed to input filter even if buffer isn't yet full. This
allows to process data with known length without relying on connection close
to signal data end.
By default p->length is set to -1 in upstream module, i.e. end of data is
indicated by connection close. To set it from per-protocol handlers upstream
input_filter_init() now called in buffered mode (as well as in
unbuffered mode).
Previous use of size_t may cause wierd effects on 32bit platforms with certain
big responses transferred in unbuffered mode.
Nuke "if (size > u->length)" check as it's not usefull anyway (preread
body data isn't subject to this check) and now requires additional check
for u->length being positive.
We no longer use r->headers_out.content_length_n as a primary source of
backend's response length. Instead we parse response length to
u->headers_in.content_length_n and copy to r->headers_out.content_length_n
when needed.
Just doing another connect isn't safe as peer.get() may expect peer.tries
to be strictly positive (this is the case e.g. with round robin with multiple
upstream servers). Increment peer.tries to at least avoid cpu hog in
round robin balancer (with the patch alert will be seen instead).
This is not enough to fully address the problem though, hence TODO. We
should be able to inform balancer that the error wasn't considered fatal
and it may make sense to retry the same peer.
The ngx_chain_update_chains() needs pool to free chain links used for buffers
with non-matching tags. Providing one helps to reduce memory consumption
for long-lived requests.
There were 2 buffers allocated on each buffer chain sent through chunked
filter (one buffer for chunk size, another one for trailing CRLF, about
120 bytes in total on 32-bit platforms). This resulted in large memory
consumption with long-lived requests sending many buffer chains. Usual
example of problematic scenario is streaming though proxy with
proxy_buffering set to off.
Introduced buffers reuse reduces memory consumption in the above problematic
scenario.
See here for initial report:
http://mailman.nginx.org/pipermail/nginx/2010-April/019814.html
