This will result in alphabetical sorting of included files if
the "include" directive with wildcards is used.
Note that the behaviour is now different from that on Windows, where
alphabetical sorting is not guaranteed for FindFirsFile()/FindNextFile()
(used to be alphabetical on NTFS, but not on FAT).
Approved by Igor Sysoev, prodded by many.
Catched by dav_chunked.t on Solaris. In released versions this might
potentially result in corruption of complex protocol responses if they
were written to disk and there were more distinct buffers than IOV_MAX
in a single write.
If write events are not blocked, an extra write event might happen for
various reasons (e.g. as a result of a http pipelining), resulting in
incorrect body being passed to a post handler.
The problem manifested itself with the dav module only, as this is
the only module which reads the body from a content phase handler (in
contrast to exclusive content handlers like proxy). Additionally, dav
module used to dump core in such situations due to ticket #238.
See reports here:
http://mailman.nginx.org/pipermail/nginx-devel/2012-November/002981.htmlhttp://serverfault.com/questions/449195/nginx-webdav-server-with-auth-request
While discarding chunked request body in some cases after detecting
request body corruption no error was returned, while it was possible
to correctly return 400 Bad Request. If error is detected too late,
make sure to properly close connection.
Additionally, in ngx_http_special_response_handler() don't return body
of 500 Internal Server Error to a client if ngx_http_discard_request_body()
fails, but disable keepalive and continue.
Even if there is no preread data, make sure to always call
ngx_http_discard_request_body_filter() in case of chunked request
body to initialize r->headers_in.content_length_n for later use.
nginx doesn't allow the same shared memory zone to be used for different
purposes, but failed to check this on reconfiguration. If a shared memory
zone was used for another purpose in the new configuration, nginx attempted
to reuse it and crashed.
An attempt to call ngx_handle_read_event() before actually reading
data from a socket might result in read event being disabled, which is
wrong. Catched by body.t test on Solaris.
The r->main->count reference counter was always incremented in
ngx_http_read_client_request_body(), while it is only needs to be
incremented on positive returns.
The $request_body variable was assuming there can't be more than two
buffers. While this is currently true due to request body reading
implementation details, this is not a good thing to depend on and may
change in the future.
It is not about "Method" but a generic message, and is expected to be used
e.g. if specified Transfer-Encoding is not supported. Fixed message to
match RFC 2616.
Additionally, disable keepalive on such errors as we won't be able to read
request body correctly if we don't understand Transfer-Encoding used.
If request body reading happens with different options it's possible
that there will be no r->request_body->temp_file available (or even
no r->request_body available if body was discarded). Return internal
server error in this case instead of committing suicide by dereferencing
a null pointer.
Pending EOF might be reported on both read and write events, whichever
comes first, so check both of them.
Patch by Yichun Zhang (agentzh), slightly modified.
If an upstream block was defined with the only server marked as
"down", e.g.
upstream u {
server 127.0.0.1:8080 down;
}
an attempt was made to contact the server despite the "down" flag.
It is believed that immediate 502 response is better in such a
case, and it's also consistent with what is currently done in case
of multiple servers all marked as "down".
Input filter might free a buffer if there is no data in it, and in case
of first buffer (used for cache header and request header, aka p->buf_to_file)
this resulted in cache corruption. Buffer memory was reused to read upstream
response before headers were written to disk.
Fix is to avoid moving pointers in ngx_event_pipe_add_free_buf() to a buffer
start if we were asked to free a buffer used by p->buf_to_file.
This fixes occasional cache file corruption, usually resulted
in "cache file ... has md5 collision" alerts.
Reported by Anatoli Marinov.
idle connections.
This behaviour is consistent with the ngx_http_set_keepalive() function and it
should decrease memory usage in some cases (especially if epoll/rtsig is used).
This parameter allows to don't require certificate to be signed by
a trusted CA, e.g. if CA certificate isn't known in advance, like in
WebID protocol.
Note that it doesn't add any security unless the certificate is actually
checked to be trusted by some external means (e.g. by a backend).
Patch by Mike Kazantsev, Eric O'Connor.
With the "ssl_stapling_verify" commit build with old OpenSSL libraries
was broken due to incorrect prototype of the ngx_ssl_stapling() function.
One incorrect use of ngx_log_debug() instead of ngx_log_debug2() slipped in
and broke win32 build.
OCSP response verification is now switched off by default to simplify
configuration, and the ssl_stapling_verify allows to switch it on.
Note that for stapling OCSP response verification isn't something required
as it will be done by a client anyway. But doing verification on a server
allows to mitigate some attack vectors, most notably stop an attacker from
presenting some specially crafted data to all site clients.
This is expected to simplify configuration in a common case when OCSP
response is signed by a certificate already present in ssl_certificate
chain. This case won't need any extra trusted certificates.
This will result in better error message in case of incorrect response
from OCSP responder:
... OCSP responder sent invalid "Content-Type" header: "text/plain"
while requesting certificate status, responder: ...
vs.
... d2i_OCSP_RESPONSE() failed (SSL:
error:0D07209B:asn1 encoding routines:ASN1_get_object:too long
error:0D068066:asn1 encoding routines:ASN1_CHECK_TLEN:bad object header
error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error)
while requesting certificate status, responder: ...
This includes the ssl_stapling_responder directive (defaults to OCSP
responder set in certificate's AIA extension).
OCSP response for a given certificate is requested once we get at least
one connection with certificate_status extension in ClientHello, and
certificate status won't be sent in the connection in question. This due
to limitations in the OpenSSL API (certificate status callback is blocking).
Note: SSL_CTX_use_certificate_chain_file() was reimplemented as it doesn't
allow to access the certificate loaded via SSL_CTX.
Very basic version without any OCSP responder query code, assuming valid
DER-encoded OCSP response is present in a ssl_stapling_file configured.
Such file might be produced with openssl like this:
openssl ocsp -issuer root.crt -cert domain.crt -respout domain.staple \
-url http://ocsp.example.com
The directive allows to specify additional trusted Certificate Authority
certificates to be used during certificate verification. In contrast to
ssl_client_certificate DNs of these cerificates aren't sent to a client
during handshake.
Trusted certificates are loaded regardless of the fact whether client
certificates verification is enabled as the same certificates will be
used for OCSP stapling, during construction of an OCSP request and for
verification of an OCSP response.
The same applies to a CRL (which is now always loaded).
The SSL_COMP_get_compression_methods() is only available as an API
function in OpenSSL 0.9.8+, require it explicitly to unbreak build
with OpenSSL 0.9.7.
Previous code used sk_SSL_COMP_delete(ssl_comp_methods, i) while iterating
stack from 0 to n, resulting in removal of only even compression methods.
In real life this change is a nop, as there is only one compression method
which is enabled by default in OpenSSL.
This fixes unwanted/incorrect cpu_affinity use on dead worker processes
respawn. While this is not ideal, it's expected to be better when previous
situation where multiple processes were spawn with identical CPU affinity
set.
Reported by Charles Chen.
With "always" gzip static returns gzipped content in all cases, without
checking if client supports it. It is useful if there are no uncompressed
files on disk anyway.
This directive allows to test desired flag as returned by memcached and
sets Content-Encoding to gzip if one found.
This is reimplementation of patch by Tomash Brechko as available on
http://openhack.ru/. It should be a bit more correct though (at least
I think so). In particular, it doesn't try to detect if we are able to
gunzip data, but instead just sets correct Content-Encoding.
The rbtree used in ngx_http_limit_req_module has two level of keys, the top is
hash, and the next is the value string itself. However, when inserting a new
node, only hash has been set, while the value string has been left empty.
The bug was introduced in r4419 (1.1.14).
Found by Charles Chen.
The "include" directive should be able to include multiple files if
given a filename mask. Fixed this to work for "include" directives
inside the "map" or "types" blocks. The "include" directive inside
the "geo" block is still not fixed.
The preallocation size was calculated incorrectly and was always 8 due to
sizeof(ngx_radix_tree_t) accidentally used instead of sizeof(ngx_radix_node_t).
Previous code incorrectly used ctx->var_values as an array of pointers to
ngx_http_variable_value_t, but the array contains structures, not pointers.
Additionally, ctx->var_values inspection failed to properly set var on
match.
We don't have strong reason to inform about any errors
reported by close() call here, and there are no other things
to do with its return value.
Prodded by Coverity.
The only thing we could potentially do here in case of error
returned is to complain to error log, but we don't have log
structure available here due to interface limitations.
Prodded by Coverity.
If ngx_time_sigsafe_update() updated only ngx_cached_err_log_time, and
then clock was adjusted backwards, the cached_time[slot].sec might
accidentally match current seconds on next ngx_time_update() call,
resulting in various cached times not being updated.
Fix is to clear the cached_time[slot].sec to explicitly mark cached times
are stale and need updating.
There is a general consensus that this change results in better
consistency between different operating systems and differently
tuned operating systems.
Note: this changes the width and meaning of the ipv6only field
of the ngx_listening_t structure. 3rd party modules that create
their own listening sockets might need fixing.
Hide headers and pass headers arrays might not be inherited correctly
into a nested location, e.g. in configuration like
server {
proxy_hide_header X-Foo;
location / {
location /nested/ {
proxy_pass_header X-Pad;
}
}
}
the X-Foo header wasn't hidden in the location /nested/.
Reported by Konstantin Svist,
http://mailman.nginx.org/pipermail/nginx-ru/2012-July/047555.html
If ngx_spawn_process() failed while starting a process, the process
handle was closed but left non-NULL in the ngx_processes[] array.
The handle later was used in WaitForMultipleObjects() (if there
were multiple worker processes configured and at least one worker
process was started successfully), resulting in infinite loop.
Reported by Ricardo V G:
http://mailman.nginx.org/pipermail/nginx-devel/2012-July/002494.html
the end (closes#187). Failure to do so could result in several listen
sockets to be created instead of only one listening on wildcard address.
Reported by Roman Odaisky.
It allows to disable generation of nginx's own entity tags, while
still handling ETags in cache properly. This may be useful e.g.
if one want to serve static files from servers with different ETag
generation algorithms.
This includes handling of ETag headers (if present in a response) with
basic support for If-Match, If-None-Match conditionals in not modified
filter.
Note that the "r->headers_out.last_modified_time == -1" check in the not
modified filter is left as is intentionally. It's to prevent handling
of If-* headers in case of proxy without cache (much like currently
done with If-Modified-Since).
This makes code more extendable. The only functional change is when
If-Modified-Since and If-Unmodified-Since are specified together, the
case which is explicitly left undefined by RFC 2616. The new behaviour
is to respect them both, which seems better.
If modification time isn't known, skip range processing and return full
entity body instead of just ignoring If-Range. Ignoring If-Range isn't
safe as client will assume entity wasn't changed since time specified.
The original idea was to optimize edge cases in case of interchangeable
backends, i.e. don't establish a new connection if we have any one
cached. This causes more harm than good though, as it screws up
underlying balancer's idea about backends used and may result in
various unexpected problems.
HP-UX needs _HPUX_ALT_XOPEN_SOCKET_API to be defined to be able to
use various POSIX versions of networking functions. Notably sendmsg()
resulted in "sendmsg() failed (9: Bad file number)" alerts without it.
See xopen_networking(7) for more details.
Poll event method needs ngx_cycle->files to work, and use of ngx_exit_cycle
without files set caused null pointer dereference in resolver's cleanup
on udp socket close.
With previous code wildcard names were added to hash even if conflict
was detected. This resulted in identical names in hash and segfault
later in ngx_hash_wildcard_init().
Number of entries in stsc atom was wrong if we've added an entry to
split a chunk.
Additionally, there is no need to add an entry if we are going to split
last chunk in an entry, it's enough to update the entry we already have.
Previously new entry was added and old one was left as is, resulting in
incorrect entry with zero chunks which might confuse some software.
Contains response status code as a 3-digit integer
(with leading zeroes if necessary), or one of the following values:
000 - response status code has not yet been assigned
009 - HTTP/0.9 request is being processed
If sending a DNS request fails with an error (e.g., when mistakenly trying
to send it to a local IP broadcast), such a request is not deleted if there
are clients waiting on it. However, it was still erroneously removed from
the queue. Later ngx_resolver_cleanup_tree() attempted to remove it from
the queue again that resulted in a NULL pointer dereference.
There are too many problems with special NTFS streams, notably "::$data",
"::$index_allocation" and ":$i30:$index_allocation".
For now we don't reject all URIs with ":" like Apache does as there are no
good reasons seen yet, and there are multiple programs using it in URLs
(e.g. MediaWiki).
Windows treats "/directory./" identical to "/directory/". Do the same
when working on Windows. Note that the behaviour is different from one
with last path component (where multiple spaces and dots are ignored by
Windows).
This includes trailings dots and spaces, NTFS streams (and short names, as
previously checked). The checks are now also done in ngx_file_info(), thus
allowing to use the "try_files" directive to protect external scripts.
Removed duplicate call of ngx_http_upstream_init_round_robin_peer()
overlooked during code changes. Rewritten "return lcp->free_rr_peer(...)"
as MSVC doesn't like it.
If the "proxy_cookie_domain" or "proxy_cookie_path" directive is used and there
are no matches in Set-Cookie header then ngx_http_proxy_rewrite_cookie() returns
NGX_DECLINED to indicate that the header was not rewritten. Returning this value
further from the upstream headers copy handler resulted in 500 error response.
See here for report:
http://mailman.nginx.org/pipermail/nginx/2012-May/033858.html
If variable was indexed in previous configuration but not in current
one, the NGX_HTTP_VAR_INDEXED flag was left set and confused
ngx_http_get_variable().
Patch by Yichun Zhang (agentzh), slightly modified.
Example configuration to reproduce:
location /image/ {
error_page 415 = /zero;
image_filter crop 100 100;
proxy_pass http://127.0.0.1:8080;
proxy_store on;
}
location /zero {
return 204;
}
The problem appeared if upstream returned (big enough) non-image file,
causing 415 to be generated by image filter.
The module now supports recursive search of client address through the
chain of trusted proxies (closes#100), in the same scope as the geo
module. Proxies are listed by the "geoip_proxy" directive, recursive
search is enabled by the "geoip_proxy_recursive" directive. IPv6 is
partially supported: proxies may be specified with IPv6 addresses.
Example:
geoip_country .../GeoIP.dat;
geoip_proxy 127.0.0.1;
geoip_proxy ::1;
geoip_proxy 10.0.0.0/8;
geoip_proxy_recursive on;
The module now supports recursive search of client address through
the chain of trusted proxies, controlled by the "proxy_recursive"
directive in the "geo" block. It also gets partial IPv6 support:
now proxies may be specified with IPv6 addresses.
Example:
geo $test {
...
proxy 127.0.0.1;
proxy ::1;
proxy_recursive;
}
There's also a slight change in behavior. When original client
address (as specified by the "geo" directive) is one of the
trusted proxies, and the value of the X-Forwarded-For request
header cannot not be parsed as a valid address, an original client
address will be used for lookup. Previously, 255.255.255.255 was
used in this case.
The module now supports recursive search of client address through
the chain of trusted proxies, controlled by the "real_ip_recursive"
directive (closes#2). It also gets full IPv6 support (closes#44)
and canonical value of the $client_addr variable on address change.
Example:
real_ip_header X-Forwarded-For;
set_real_ip_from 127.0.0.0/8;
set_real_ip_from ::1;
set_real_ip_from unix:;
real_ip_recursive on;
On input it takes an original address, string in the X-Forwarded-For format
and its length, list of trusted proxies, and a flag indicating to perform
the recursive search. On output it returns NGX_OK and the "deepest" valid
address in a chain, or NGX_DECLINED. It supports AF_INET and AF_INET6.
Additionally, original address and/or proxy may be specified as AF_UNIX.
Due to weight being set to 0 for down peers, order of peers after sorting
wasn't the same as without the "down" flag (with down peers at the end),
resulting in client rebalancing for clients on other servers. The only
rebalancing which should happen after adding "down" to a server is one
for clients on the server.
The problem was introduced in r1377 (which fixed endless loop by setting
weight to 0 for down servers). The loop is no longer possible with new
smooth algorithm, so preserving original weight is safe.
For edge case weights like { 5, 1, 1 } we now produce { a, a, b, a, c, a, a }
sequence instead of { c, b, a, a, a, a, a } produced previously.
Algorithm is as follows: on each peer selection we increase current_weight
of each eligible peer by its weight, select peer with greatest current_weight
and reduce its current_weight by total number of weight points distributed
among peers.
In case of { 5, 1, 1 } weights this gives the following sequence of
current_weight's:
a b c
0 0 0 (initial state)
5 1 1 (a selected)
-2 1 1
3 2 2 (a selected)
-4 2 2
1 3 3 (b selected)
1 -4 3
6 -3 4 (a selected)
-1 -3 4
4 -2 5 (c selected)
4 -2 -2
9 -1 -1 (a selected)
2 -1 -1
7 0 0 (a selected)
0 0 0
To preserve weight reduction in case of failures the effective_weight
variable was introduced, which usually matches peer's weight, but is
reduced temporarily on peer failures.
This change also fixes loop with backup servers and proxy_next_upstream
http_404 (ticket #47), and skipping alive upstreams in some cases if there
are multiple dead ones (ticket #64).
With r->filter_finalize set the ngx_http_finalize_connection() wasn't
called from ngx_http_finalize_request() called with NGX_OK, resulting in
r->main->count not being decremented, thus causing request hang in some
rare situations.
See here for more details:
http://mailman.nginx.org/pipermail/nginx-devel/2012-May/002190.html
Patch by Yichun Zhang (agentzh).
If we already had CNAME in resolver node (i.e. rn->cnlen and rn->u.cname
set), and got additional response with A record, it resulted in rn->cnlen
set and rn->u.cname overwritten by rn->u.addr (or rn->u.addrs), causing
segmentation fault later in ngx_resolver_free_node() on an attempt to free
overwritten rn->u.cname. The opposite (i.e. CNAME got after A) might cause
similar problems as well.
In case of EMFILE/ENFILE returned from accept() we disable accept events,
and (in case of no accept mutex used) arm timer to re-enable them later.
With accept mutex we just drop it, and rely on normal accept mutex handling
to re-enable accept events once it's acquired again.
As we now handle errors in question, logging level was changed to "crit"
(instead of "alert" used for unknown errors).
Note: the code might call ngx_enable_accept_events() multiple times if
there are many listen sockets. The ngx_enable_accept_events() function was
modified to check if connection is already active (via c->read->active) and
skip it then, thus making multiple calls safe.
The following code resulted in incorrect escaping of uri and possible
segfault:
location / {
rewrite ^(.*) $1?c=$1;
return 200 "$uri";
}
If there were arguments in a rewrite's replacement string, and length was
actually calculated (due to duplicate captures as in the example above,
or variables present), the is_args flag was set and incorrectly copied
after length calculation. This resulted in escaping applied to the uri part
of the replacement, resulting in incorrect escaping. Additionally, buffer
was allocated without escaping expected, thus this also resulted in buffer
overrun and possible segfault.
Padding was incorrectly ignored on end request, empty stdout and stderr
fastcgi records. This resulted in protocol desynchronization if fastcgi
application used these records with padding for some reason.
Reported by Ilia Vinokurov.
Failing to do so results in problems if 400 or 414 requests are
redirected to fastcgi/scgi/uwsgi upstream, as well as after invalid
headers got from upstream. This was already fixed for proxy in r3478,
but fastcgi (the only affected protocol at that time) was missed.
Reported by Matthieu Tourne.
On internal redirects this happens via ngx_http_handler() call, which is
not called on named location redirect. As a result incorrect write handler
remained (if previously set) and this might cause incorrect behaviour (likely
request hang).
Patch by Yichun Zhang (agentzh).
If name passed for resolution was { 0, NULL } (e.g. as a result
of name server returning CNAME pointing to ".") pointer wrapped
to (void *) -1 resulting in segmentation fault on an attempt to
dereference it.
Reported by Lanshun Zhou.
The proxy module context may be NULL in case of filter finalization
(e.g. by image_filter) followed by an internal redirect. This needs
some better handling, but for now just check if ctx is still here.
The problem occured if first uri in try_files was shorter than request uri,
resulting in reserve being 0 and hence allocation skipped. The bug was
introduced in r4584 (1.1.19).
Instead of checking if there is events{} section present in configuration
in init_module handler we now do the same in init_conf handler. This
allows master process to detect incorrect configuration early and
reject it.
We now stop on IOV_MAX iovec entries only if we are going to add new one,
i.e. next buffer can't be coalesced into last iovec.
This also fixes incorrect checks for trailer creation on FreeBSD and
Mac OS X, header.nelts was checked instead of trailer.nelts.
The "complete" flag wasn't cleared on loop iteration start, resulting in
broken behaviour if there were more than IOV_MAX buffers and first
iteration was fully completed (and hence the "complete" flag was set
to 1).
Previous (incorrect) behaviour was to inherit ipv6 rules separately from
ipv4 ones. Now all rules are either inherited (if there are no rules
defined at current level) or not (if there are any rules defined).
Integer overflow is undefined behaviour in C and this indeed caused
problems on Solaris/SPARC (at least in some cases). Fix is to
subtract unsigned integers instead, and then cast result to a signed
one, which is implementation-defined behaviour and used to work.
Strictly speaking, we should compare (unsigned) result with the maximum
value of the corresponding signed integer type instead, this will be
defined behaviour. This will require much more changes though, and
considered to be overkill for now.
Such upstreams cause CPU hog later in the code as number of peers isn't
expected to be 0. Currently this may happen either if there are only backup
servers defined in an upstream block, or if server with ipv6 address used
in an upstream block.
Note that "ctxt->loadsubset = 1" previously used isn't really correct as
ctxt->loadsubset is a bitfield now. The use of xmlCtxtUseOptions() with
XML_PARSE_DTDLOAD is believed to be a better way to do the same thing.
Patch by Laurence Rowe.
POSIX doesn't require it to be defined, and Debian GNU/Hurd doesn't define
it. Note that if there is no MAX_PATH defined we have to use realpath()
with NULL argument and free() the result.
Most of the systems have it included due to namespace pollution, but
relying on this is a bad idea. Explicit include is required for at least
Debian GNU/Hurd.
The problem was introduced in 0.7.44 (r2589) during conversion to complex
values. Previously string.len included space for terminating NUL, but
with complex values it doesn't.
The bug in question is likely already fixed (though unfortunately we have
no information available as Apple's bugtracker isn't open), and the
workaround seems to be too pessimistic for modern versions of Safari
as well as other webkit-based browsers pretending to be Safari.
- Removed "hash" element from ngx_http_header_val_t which was always 1.
- Replaced NGX_HTTP_EXPIRES_* with ngx_http_expires_t enum type.
- Added prototype for ngx_http_add_header()
- Simplified ngx_http_set_last_modified().
