Hide headers and pass headers arrays might not be inherited correctly
into a nested location, e.g. in configuration like
server {
proxy_hide_header X-Foo;
location / {
location /nested/ {
proxy_pass_header X-Pad;
}
}
}
the X-Foo header wasn't hidden in the location /nested/.
Reported by Konstantin Svist,
http://mailman.nginx.org/pipermail/nginx-ru/2012-July/047555.html
the end (closes#187). Failure to do so could result in several listen
sockets to be created instead of only one listening on wildcard address.
Reported by Roman Odaisky.
It allows to disable generation of nginx's own entity tags, while
still handling ETags in cache properly. This may be useful e.g.
if one want to serve static files from servers with different ETag
generation algorithms.
This includes handling of ETag headers (if present in a response) with
basic support for If-Match, If-None-Match conditionals in not modified
filter.
Note that the "r->headers_out.last_modified_time == -1" check in the not
modified filter is left as is intentionally. It's to prevent handling
of If-* headers in case of proxy without cache (much like currently
done with If-Modified-Since).
This makes code more extendable. The only functional change is when
If-Modified-Since and If-Unmodified-Since are specified together, the
case which is explicitly left undefined by RFC 2616. The new behaviour
is to respect them both, which seems better.
If modification time isn't known, skip range processing and return full
entity body instead of just ignoring If-Range. Ignoring If-Range isn't
safe as client will assume entity wasn't changed since time specified.
The original idea was to optimize edge cases in case of interchangeable
backends, i.e. don't establish a new connection if we have any one
cached. This causes more harm than good though, as it screws up
underlying balancer's idea about backends used and may result in
various unexpected problems.
Number of entries in stsc atom was wrong if we've added an entry to
split a chunk.
Additionally, there is no need to add an entry if we are going to split
last chunk in an entry, it's enough to update the entry we already have.
Previously new entry was added and old one was left as is, resulting in
incorrect entry with zero chunks which might confuse some software.
Contains response status code as a 3-digit integer
(with leading zeroes if necessary), or one of the following values:
000 - response status code has not yet been assigned
009 - HTTP/0.9 request is being processed
There are too many problems with special NTFS streams, notably "::$data",
"::$index_allocation" and ":$i30:$index_allocation".
For now we don't reject all URIs with ":" like Apache does as there are no
good reasons seen yet, and there are multiple programs using it in URLs
(e.g. MediaWiki).
Windows treats "/directory./" identical to "/directory/". Do the same
when working on Windows. Note that the behaviour is different from one
with last path component (where multiple spaces and dots are ignored by
Windows).
Removed duplicate call of ngx_http_upstream_init_round_robin_peer()
overlooked during code changes. Rewritten "return lcp->free_rr_peer(...)"
as MSVC doesn't like it.
If the "proxy_cookie_domain" or "proxy_cookie_path" directive is used and there
are no matches in Set-Cookie header then ngx_http_proxy_rewrite_cookie() returns
NGX_DECLINED to indicate that the header was not rewritten. Returning this value
further from the upstream headers copy handler resulted in 500 error response.
See here for report:
http://mailman.nginx.org/pipermail/nginx/2012-May/033858.html
If variable was indexed in previous configuration but not in current
one, the NGX_HTTP_VAR_INDEXED flag was left set and confused
ngx_http_get_variable().
Patch by Yichun Zhang (agentzh), slightly modified.
Example configuration to reproduce:
location /image/ {
error_page 415 = /zero;
image_filter crop 100 100;
proxy_pass http://127.0.0.1:8080;
proxy_store on;
}
location /zero {
return 204;
}
The problem appeared if upstream returned (big enough) non-image file,
causing 415 to be generated by image filter.
The module now supports recursive search of client address through the
chain of trusted proxies (closes#100), in the same scope as the geo
module. Proxies are listed by the "geoip_proxy" directive, recursive
search is enabled by the "geoip_proxy_recursive" directive. IPv6 is
partially supported: proxies may be specified with IPv6 addresses.
Example:
geoip_country .../GeoIP.dat;
geoip_proxy 127.0.0.1;
geoip_proxy ::1;
geoip_proxy 10.0.0.0/8;
geoip_proxy_recursive on;
The module now supports recursive search of client address through
the chain of trusted proxies, controlled by the "proxy_recursive"
directive in the "geo" block. It also gets partial IPv6 support:
now proxies may be specified with IPv6 addresses.
Example:
geo $test {
...
proxy 127.0.0.1;
proxy ::1;
proxy_recursive;
}
There's also a slight change in behavior. When original client
address (as specified by the "geo" directive) is one of the
trusted proxies, and the value of the X-Forwarded-For request
header cannot not be parsed as a valid address, an original client
address will be used for lookup. Previously, 255.255.255.255 was
used in this case.
The module now supports recursive search of client address through
the chain of trusted proxies, controlled by the "real_ip_recursive"
directive (closes#2). It also gets full IPv6 support (closes#44)
and canonical value of the $client_addr variable on address change.
Example:
real_ip_header X-Forwarded-For;
set_real_ip_from 127.0.0.0/8;
set_real_ip_from ::1;
set_real_ip_from unix:;
real_ip_recursive on;
On input it takes an original address, string in the X-Forwarded-For format
and its length, list of trusted proxies, and a flag indicating to perform
the recursive search. On output it returns NGX_OK and the "deepest" valid
address in a chain, or NGX_DECLINED. It supports AF_INET and AF_INET6.
Additionally, original address and/or proxy may be specified as AF_UNIX.
Due to weight being set to 0 for down peers, order of peers after sorting
wasn't the same as without the "down" flag (with down peers at the end),
resulting in client rebalancing for clients on other servers. The only
rebalancing which should happen after adding "down" to a server is one
for clients on the server.
The problem was introduced in r1377 (which fixed endless loop by setting
weight to 0 for down servers). The loop is no longer possible with new
smooth algorithm, so preserving original weight is safe.
For edge case weights like { 5, 1, 1 } we now produce { a, a, b, a, c, a, a }
sequence instead of { c, b, a, a, a, a, a } produced previously.
Algorithm is as follows: on each peer selection we increase current_weight
of each eligible peer by its weight, select peer with greatest current_weight
and reduce its current_weight by total number of weight points distributed
among peers.
In case of { 5, 1, 1 } weights this gives the following sequence of
current_weight's:
a b c
0 0 0 (initial state)
5 1 1 (a selected)
-2 1 1
3 2 2 (a selected)
-4 2 2
1 3 3 (b selected)
1 -4 3
6 -3 4 (a selected)
-1 -3 4
4 -2 5 (c selected)
4 -2 -2
9 -1 -1 (a selected)
2 -1 -1
7 0 0 (a selected)
0 0 0
To preserve weight reduction in case of failures the effective_weight
variable was introduced, which usually matches peer's weight, but is
reduced temporarily on peer failures.
This change also fixes loop with backup servers and proxy_next_upstream
http_404 (ticket #47), and skipping alive upstreams in some cases if there
are multiple dead ones (ticket #64).
With r->filter_finalize set the ngx_http_finalize_connection() wasn't
called from ngx_http_finalize_request() called with NGX_OK, resulting in
r->main->count not being decremented, thus causing request hang in some
rare situations.
See here for more details:
http://mailman.nginx.org/pipermail/nginx-devel/2012-May/002190.html
Patch by Yichun Zhang (agentzh).
The following code resulted in incorrect escaping of uri and possible
segfault:
location / {
rewrite ^(.*) $1?c=$1;
return 200 "$uri";
}
If there were arguments in a rewrite's replacement string, and length was
actually calculated (due to duplicate captures as in the example above,
or variables present), the is_args flag was set and incorrectly copied
after length calculation. This resulted in escaping applied to the uri part
of the replacement, resulting in incorrect escaping. Additionally, buffer
was allocated without escaping expected, thus this also resulted in buffer
overrun and possible segfault.
Padding was incorrectly ignored on end request, empty stdout and stderr
fastcgi records. This resulted in protocol desynchronization if fastcgi
application used these records with padding for some reason.
Reported by Ilia Vinokurov.
Failing to do so results in problems if 400 or 414 requests are
redirected to fastcgi/scgi/uwsgi upstream, as well as after invalid
headers got from upstream. This was already fixed for proxy in r3478,
but fastcgi (the only affected protocol at that time) was missed.
Reported by Matthieu Tourne.
On internal redirects this happens via ngx_http_handler() call, which is
not called on named location redirect. As a result incorrect write handler
remained (if previously set) and this might cause incorrect behaviour (likely
request hang).
Patch by Yichun Zhang (agentzh).
The proxy module context may be NULL in case of filter finalization
(e.g. by image_filter) followed by an internal redirect. This needs
some better handling, but for now just check if ctx is still here.
The problem occured if first uri in try_files was shorter than request uri,
resulting in reserve being 0 and hence allocation skipped. The bug was
introduced in r4584 (1.1.19).
Previous (incorrect) behaviour was to inherit ipv6 rules separately from
ipv4 ones. Now all rules are either inherited (if there are no rules
defined at current level) or not (if there are any rules defined).
Such upstreams cause CPU hog later in the code as number of peers isn't
expected to be 0. Currently this may happen either if there are only backup
servers defined in an upstream block, or if server with ipv6 address used
in an upstream block.
Note that "ctxt->loadsubset = 1" previously used isn't really correct as
ctxt->loadsubset is a bitfield now. The use of xmlCtxtUseOptions() with
XML_PARSE_DTDLOAD is believed to be a better way to do the same thing.
Patch by Laurence Rowe.
POSIX doesn't require it to be defined, and Debian GNU/Hurd doesn't define
it. Note that if there is no MAX_PATH defined we have to use realpath()
with NULL argument and free() the result.
The problem was introduced in 0.7.44 (r2589) during conversion to complex
values. Previously string.len included space for terminating NUL, but
with complex values it doesn't.
The bug in question is likely already fixed (though unfortunately we have
no information available as Apple's bugtracker isn't open), and the
workaround seems to be too pessimistic for modern versions of Safari
as well as other webkit-based browsers pretending to be Safari.
- Removed "hash" element from ngx_http_header_val_t which was always 1.
- Replaced NGX_HTTP_EXPIRES_* with ngx_http_expires_t enum type.
- Added prototype for ngx_http_add_header()
- Simplified ngx_http_set_last_modified().
