The 6f8254ae61b8 change inadvertently fixed the duplicate port
detection similar to how it was fixed for mail in b2920b517490.
It also revealed another issue: the socket type (tcp vs. udp)
wasn't taken into account.
Since 4fbef397c753 nginx rejects with the 400 error any attempts of
requesting different host over the same connection, if the relevant
virtual server requires verification of a client certificate.
While requesting hosts other than negotiated isn't something legal
in HTTP/1.x, the HTTP/2 specification explicitly permits such requests
for connection reuse and has introduced a special response code 421.
According to RFC 7540 Section 9.1.2 this code can be sent by a server
that is not configured to produce responses for the combination of
scheme and authority that are included in the request URI. And the
client may retry the request over a different connection.
Now this code is used for requests that aren't authorized in current
connection. After receiving the 421 response a client will be able
to open a new connection, provide the required certificate and retry
the request.
Unfortunately, not all clients currently are able to handle it well.
Notably Chrome just shows an error, while at least the latest version
of Firefox retries the request over a new connection.
Using the same DH parameters on multiple servers is believed to be subject
to precomputation attacks, see http://weakdh.org/. Additionally, 1024 bits
are not enough in the modern world as well. Let users provide their own
DH parameters with the ssl_dhparam directive if they want to use EDH ciphers.
Note that SSL_CTX_set_dh_auto() as provided by OpenSSL 1.1.0 uses fixed
DH parameters from RFC 5114 and RFC 3526, and therefore subject to the same
precomputation attacks. We avoid using it as well.
This change also fixes compilation with OpenSSL 1.1.0-pre5 (aka Beta 2),
as OpenSSL developers changed their policy after releasing Beta 1 and
broke API once again by making the DH struct opaque (see ticket #860).
OpenSSL 1.0.2+ allows configuring a curve list instead of a single curve
previously supported. This allows use of different curves depending on
what client supports (as available via the elliptic_curves extension),
and also allows use of different curves in an ECDHE key exchange and
in the ECDSA certificate.
The special value "auto" was introduced (now the default for ssl_ecdh_curve),
which means "use an internal list of curves as available in the OpenSSL
library used". For versions prior to OpenSSL 1.0.2 it maps to "prime256v1"
as previously used. The default in 1.0.2b+ prefers prime256v1 as well
(and X25519 in OpenSSL 1.1.0+).
As client vs. server preference of curves is controlled by the
same option as used for ciphers (SSL_OP_CIPHER_SERVER_PREFERENCE),
the ssl_prefer_server_ciphers directive now controls both.
The SSL_CTX_add0_chain_cert() function as introduced in OpenSSL 1.0.2 now
used instead of SSL_CTX_add_extra_chain_cert().
SSL_CTX_add_extra_chain_cert() adds extra certs for all certificates
in the context, while SSL_CTX_add0_chain_cert() only to a particular
certificate. There is no difference unless multiple certificates are used,
though it is important when using multiple certificates.
Additionally, SSL_CTX_select_current_cert() is now called before using
a chain to make sure correct chain will be returned.
A pointer to a previously configured certificate now stored in a certificate.
This makes it possible to iterate though all certificates configured in
the SSL context. This is now used to configure OCSP stapling for all
certificates, and in ngx_ssl_session_id_context().
As SSL_CTX_use_certificate() frees previously loaded certificate of the same
type, and we have no way to find out if it's the case, X509_free() calls
are now posponed till ngx_ssl_cleanup_ctx().
Note that in OpenSSL 1.0.2+ this can be done without storing things in exdata
using the SSL_CTX_set_current_cert() and SSL_CTX_get0_certificate() functions.
These are not yet available in all supported versions though, so it's easier
to continue to use exdata for now.
This makes it possible to properly return OCSP staple with multiple
certificates configured.
Note that it only works properly in OpenSSL 1.0.1d+, 1.0.0k, 0.9.8y+.
In older versions SSL_get_certificate() fails to return correct certificate
when the certificate status callback is called.
Both minor and major versions are now limited to 999 maximum. In case of
r->http_minor, this limit is already implied by the code. Major version,
r->http_major, in theory can be up to 65535 with current code, but such
values are very unlikely to become real (and, additionally, such values
are not allowed by RFC 7230), so the same test was used for r->http_major.
When it's known that the kernel supports EPOLLRDHUP, there is no need in
additional recv() call to get EOF or error when the flag is absent in the
event generated by the kernel. A special runtime test is done at startup
to detect if EPOLLRDHUP is actually supported by the kernel because
epoll_ctl() silently ignores unknown flags.
With this knowledge it's now possible to drop the "ready" flag for partial
read. Previously, the "ready" flag was kept until the recv() returned EOF
or error. In particular, this change allows the lingering close heuristics
(which relies on the "ready" flag state) to actually work on Linux, and not
wait for more data in most cases.
The "available" flag is now used in the read event with the semantics similar
to the corresponding counter in kqueue.
This parameter lets binding the proxy connection to a non-local address.
Upstream will see the connection as coming from that address.
When used with $remote_addr, upstream will accept the connection from real
client address.
Example:
proxy_bind $remote_addr transparent;
The WINDOW_UPDATE frame could be left in the output queue for an indefinite
period of time resulting in the request timeout.
This might happen if reading of the body was triggered by an event unrelated
to client connection, e.g. by the limit_req timer.
Particularly this prevents sending WINDOW_UPDATE with zero delta
which can result in PROTOCOL_ERROR.
Also removed surplus setting of no_flow_control to 0.
The ngx_thread_pool_done object isn't volatile, and at least some
compilers assume that it is permitted to reorder modifications of
volatile and non-volatile objects. Added appropriate ngx_memory_barrier()
calls to make sure all modifications will happen before the lock is released.
Reported by Mindaugas Rasiukevicius,
http://mailman.nginx.org/pipermail/nginx-devel/2016-April/008160.html.
Refusing streams is known to be incorrectly handled at least by IE, Edge
and Safari. Make sure to provide appropriate logging to simplify fixing
this in the affected browsers.
After the 92464ebace8e change, it has been discovered that not all
clients follow the RFC and handle RST_STREAM with NO_ERROR properly.
Notably, Chrome currently interprets it as INTERNAL_ERROR and discards
the response.
As a workaround, instead of RST_STREAM the maximum stream window update
will be sent, which will let client to send up to 2 GB of a request body
data before getting stuck on flow control. All the received data will
be silently discarded.
See for details:
http://mailman.nginx.org/pipermail/nginx-devel/2016-April/008143.htmlhttps://bugs.chromium.org/p/chromium/issues/detail?id=603182
A client is allowed to send requests before receiving and acknowledging
the SETTINGS frame. Such a client having a wrong idea about the stream's
could send the request body that nginx isn't ready to process.
The previous behavior was to send RST_STREAM with FLOW_CONTROL_ERROR in
such case, but it didn't allow retrying requests that have been rejected.
This prevents forming empty records out of such buffers. Particularly it fixes
double end-of-stream records with chunked transfer encoding, or when HTTP/2 is
used and the END_STREAM flag has been sent without data. In both cases there
is an empty buffer at the end of the request body chain with the "last_buf"
flag set.
The canonical libfcgi, as well as php implementation, tolerates such records,
while the HHVM parser is more strict and drops the connection (ticket #950).
