Multiple C4306 warnings (conversion from 'type1' to 'type2' of greater size)
appear during 64-bit compilation with MSVC 2010 (and older) due to extensively
used constructs like "(void *) -1", so they were disabled.
In newer MSVC versions C4306 warnings were replaced with C4312 ones, and
these are not generated for such trivial type casts.
In 2014ed60f17f, "#if SSL_CTRL_SET_ECDH_AUTO" test was incorrectly used
instead of "#ifdef SSL_CTRL_SET_ECDH_AUTO". There is no practical
difference, since SSL_CTRL_SET_ECDH_AUTO evaluates to a non-zero numeric
value when defined, but anyway it's better to correctly test if the value
is defined.
The SSL_R_BAD_RECORD_TYPE ("bad record type") errors are reported by
OpenSSL 1.1.1 or newer when using TLSv1.3 if the client sends a record
with unknown or unexpected type. These errors are now logged at the
"info" level.
When client DATA frame header and its content come in different QUIC packets,
it may happen that only the header is processed by the first
ngx_http_v3_request_body_filter() call. In this case an empty request body
buffer is added to r->request_body->bufs, which is later reused in a
subsequent ngx_http_v3_request_body_filter() call without being removed from
the body chain. As a result, rb->request_body->bufs ends up with two copies of
the same buffer.
The fix is to avoid adding empty request body buffers to r->request_body->bufs.
When reading exactly rev->available bytes, rev->available might become 0
after FIONREAD usage introduction in efd71d49bde0. On the next call of
ngx_readv_chain() on systems with EPOLLRDHUP this resulted in return without
any actions, that is, with rev->ready set, and this in turn resulted in no
timers set in event pipe, leading to socket leaks.
Fix is to reset rev->ready in ngx_readv_chain() when returning due to
rev->available being 0 with EPOLLRDHUP, much like it is already done in
ngx_unix_recv(). This ensures that if rev->available will become 0, on
systems with EPOLLRDHUP support appropriate EPOLLRDHUP-specific handling
will happen on the next ngx_readv_chain() call.
While here, also synced ngx_readv_chain() to match ngx_unix_recv() and
reset rev->ready when returning due to rev->available being 0 with kqueue.
This is mostly cosmetic change, as rev->ready is anyway reset when
rev->available is set to 0.
Some servers might emit Content-Range header on 200 responses, and this
does not seem to contradict RFC 9110: as per RFC 9110, the Content-Range
header has no meaning for status codes other than 206 and 416. Previously
this resulted in duplicate Content-Range headers in nginx responses handled
by the range filter. Fix is to clear pre-existing headers.
Starting with OpenSSL 1.1.1, various additional errors can be reported
by OpenSSL in case of client-related issues, most notably during TLSv1.3
handshakes. In particular, SSL_R_BAD_KEY_SHARE ("bad key share"),
SSL_R_BAD_EXTENSION ("bad extension"), SSL_R_BAD_CIPHER ("bad cipher"),
SSL_R_BAD_ECPOINT ("bad ecpoint"). These are now logged at the "info"
level.
To ensure optimal use of memory, SSL contexts for proxying are now
inherited from previous levels as long as relevant proxy_ssl_* directives
are not redefined.
Further, when no proxy_ssl_* directives are redefined in a server block,
we now preserve plcf->upstream.ssl in the "http" section configuration
to inherit it to all servers.
Similar changes made in uwsgi, grpc, and stream proxy.
Similar to 70e65bf8dfd7, the change is made to ensure that the ability to
cancel resolver tasks is fully controlled by the caller. As mentioned in the
referenced commit, it is safe to make this timer cancelable because resolve
tasks can have their own timeouts that are not cancelable.
The scenario where this may become a problem is a periodic background resolve
task (not tied to a specific request or a client connection), which receives a
response with short TTL, large enough to warrant fallback to a TCP query.
With each event loop wakeup, we either have a previously set write timer
instance or schedule a new one. The non-cancelable write timer can delay or
block graceful shutdown of a worker even if the ngx_resolver_ctx_t->cancelable
flag is set by the API user, and there are no other tasks or connections.
We use the resolver API in this way to maintain the list of upstream server
addresses specified with the 'resolve' parameter, and there could be third-party
modules implementing similar logic.
When we generate the last_buf buffer for an UDP upstream recv error, it does
not contain any data from the wire. ngx_stream_write_filter attempts to forward
it anyways, which is incorrect (e.g., UDP upstream ECONNREFUSED will be
translated to an empty packet).
This happens because we mark the buffer as both 'flush' and 'last_buf', and
ngx_stream_write_filter has special handling for flush with certain types of
connections (see d127837c714f, 32b0ba4855a6). The flags are meant to be
mutually exclusive, so the fix is to ensure that flush and last_buf are not set
at the same time.
Reproduction:
stream {
upstream unreachable {
server 127.0.0.1:8880;
}
server {
listen 127.0.0.1:8998 udp;
proxy_pass unreachable;
}
}
1 0.000000000 127.0.0.1 → 127.0.0.1 UDP 47 45588 → 8998 Len=5
2 0.000166300 127.0.0.1 → 127.0.0.1 UDP 47 51149 → 8880 Len=5
3 0.000172600 127.0.0.1 → 127.0.0.1 ICMP 75 Destination unreachable (Port
unreachable)
4 0.000202400 127.0.0.1 → 127.0.0.1 UDP 42 8998 → 45588 Len=0
Fixes d127837c714f.
Both "count" and "duration" variables are 32-bit, so their product might
potentially overflow. It is used to reduce 64-bit start_time variable,
and with very large start_time this can result in incorrect seeking.
Found by Coverity (CID 1499904).
Now, if the directive is given an empty string, such configuration cancels
loading of certificates, in particular, if they would be otherwise inherited
from the previous level. This restores previous behaviour, before variables
support in certificates was introduced (3ab8e1e2f0f7).
Previously, if caching was disabled due to Expires in the past, nginx
failed to cache the response even if it was cacheable as per subsequently
parsed Cache-Control header (ticket #964).
Similarly, if caching was disabled due to Expires in the past,
"Cache-Control: no-cache" or "Cache-Control: max-age=0", caching was not
used if it was cacheable as per subsequently parsed X-Accel-Expires header.
Fix is to avoid disabling caching immediately after parsing Expires in
the past or Cache-Control, but rather set flags which are later checked by
ngx_http_upstream_process_headers() (and cleared by "Cache-Control: max-age"
and X-Accel-Expires).
Additionally, now X-Accel-Expires does not prevent parsing of cache control
extensions, notably stale-while-revalidate and stale-if-error. This
ensures that order of the X-Accel-Expires and Cache-Control headers is not
important.
Prodded by Vadim Fedorenko and Yugo Horie.
If a module adds multiple WWW-Authenticate headers (ticket #485) to the
response, linked in r->headers_out.www_authenticate, all headers are now
cleared if another module later allows access.
This change is a nop for standard modules, since the only access module which
can add multiple WWW-Authenticate headers is the auth request module, and
it is checked after other standard access modules. Though this might
affect some third party access modules.
Note that if a 3rd party module adds a single WWW-Authenticate header
and not yet modified to set the header's next pointer to NULL, attempt to
clear such a header with this change will result in a segmentation fault.
When using auth_request with an upstream server which returns 401
(Unauthorized), multiple WWW-Authenticate headers from the upstream server
response are now properly copied to the response.
When using proxy_intercept_errors and an error page for error 401
(Unauthorized), multiple WWW-Authenticate headers from the upstream server
response are now properly copied to the response.
Most of the known duplicate upstream response headers are now ignored
with a warning.
If syntax permits multiple headers, these are now properly linked to
the lists, notably Vary and WWW-Authenticate. This makes it possible
to further handle such lists where it makes sense.
With this change, duplicate Content-Length and Transfer-Encoding headers
are now rejected. Further, responses with invalid Content-Length or
Transfer-Encoding headers are now rejected, as well as responses with both
Content-Length and Transfer-Encoding.
The h->next pointer properly provided as NULL in all cases where known
output headers are added.
Note that there are 3rd party modules which might not do this, and it
might be risky to rely on this for arbitrary headers.
Since introduction of offset handling in ngx_http_upstream_copy_header_line()
in revision 573:58475592100c, the ngx_http_upstream_copy_content_encoding()
function is no longer needed, as its behaviour is exactly equivalent to
ngx_http_upstream_copy_header_line() with appropriate offset. As such,
the ngx_http_upstream_copy_content_encoding() function was removed.
Further, the u->headers_in.content_encoding field is not used anywhere,
so it was removed as well.
Further, Content-Encoding handling no longer depends on NGX_HTTP_GZIP,
as it can be used even without any gzip handling compiled in (for example,
in the charset filter).
As all known input headers are now linked lists, these are now handled
identically. In particular, this makes it possible to access properly
combined values of headers not specifically handled previously, such
as "Via" or "Connection".
The ngx_http_process_multi_header_lines() function is removed, as it is
exactly equivalent to ngx_http_process_header_line(). Similarly,
ngx_http_variable_header() is used instead of ngx_http_variable_headers().
Multi headers are now using linked lists instead of arrays. Notably,
the following fields were changed: r->headers_in.cookies (renamed
to r->headers_in.cookie), r->headers_in.x_forwarded_for,
r->headers_out.cache_control, r->headers_out.link, u->headers_in.cache_control
u->headers_in.cookies (renamed to u->headers_in.set_cookie).
The r->headers_in.cookies and u->headers_in.cookies fields were renamed
to r->headers_in.cookie and u->headers_in.set_cookie to match header names.
The ngx_http_parse_multi_header_lines() and ngx_http_parse_set_cookie_lines()
functions were changed accordingly.
With this change, multi headers are now essentially equivalent to normal
headers, and following changes will further make them equivalent.
Previously, $http_*, $sent_http_*, $sent_trailer_*, $upstream_http_*,
and $upstream_trailer_* variables returned only the first header (with
a few specially handled exceptions: $http_cookie, $http_x_forwarded_for,
$sent_http_cache_control, $sent_http_link).
With this change, all headers are returned, combined together. For
example, $http_foo variable will be "a, b" if there are "Foo: a" and
"Foo: b" headers in the request.
Note that $upstream_http_set_cookie will also return all "Set-Cookie"
headers (ticket #1843), though this might not be what one want, since
the "Set-Cookie" header does not follow the list syntax (see RFC 7230,
section 3.2.2).
The uwsgi specification states that "The uwsgi block vars represent a
dictionary/hash". This implies that no duplicate headers are expected.
Further, provided headers are expected to follow CGI specification,
which also requires to combine headers (RFC 3875, section "4.1.18.
Protocol-Specific Meta-Variables"): "If multiple header fields with
the same field-name are received then the server MUST rewrite them
as a single value having the same semantics".
SCGI specification explicitly forbids headers with duplicate names
(section "3. Request Format"): "Duplicate names are not allowed in
the headers".
Further, provided headers are expected to follow CGI specification,
which also requires to combine headers (RFC 3875, section "4.1.18.
Protocol-Specific Meta-Variables"): "If multiple header fields with
the same field-name are received then the server MUST rewrite them
as a single value having the same semantics".
FastCGI responder is expected to receive CGI/1.1 environment variables
in the parameters (see section "6.2 Responder" of the FastCGI specification).
Obviously enough, there cannot be multiple environment variables with
the same name.
Further, CGI specification (RFC 3875, section "4.1.18. Protocol-Specific
Meta-Variables") explicitly requires to combine headers: "If multiple
header fields with the same field-name are received then the server MUST
rewrite them as a single value having the same semantics".
Previously, the r->header_in->connection pointer was never set despite
being present in ngx_http_headers_in, resulting in incorrect value returned
by $r->header_in("Connection") in embedded perl.
In 7583:efd71d49bde0 (nginx 1.17.5) along with introduction of the
ioctl(FIONREAD) support proper handling of systems without EPOLLRDHUP
support in the kernel (but with EPOLLRDHUP in headers) was broken.
Before the change, rev->available was never set to 0 unless
ngx_use_epoll_rdhup was also set (that is, runtime test for EPOLLRDHUP
introduced in 6536:f7849bfb6d21 succeeded). After the change,
rev->available might reach 0 on systems without runtime EPOLLRDHUP
support, stopping further reading in ngx_readv_chain() and ngx_unix_recv().
And, if EOF happened to be already reported along with the last event,
it is not reported again by epoll_wait(), leading to connection hangs
and timeouts on such systems.
This affects Linux kernels before 2.6.17 if nginx was compiled
with newer headers, and, more importantly, emulation layers, such as
DigitalOcean's App Platform's / gVisor's epoll emulation layer.
Fix is to explicitly check ngx_use_epoll_rdhup before the corresponding
rev->pending_eof tests in ngx_readv_chain() and ngx_unix_recv().
Previously, QUIC used the existing UDP framework, which was created for UDP in
Stream. However the way QUIC connections are created and looked up is different
from the way UDP connections in Stream are created and looked up. Now these
two implementations are decoupled.
Previously, last buffer was tracked by keeping a pointer to the previous
chain link "next" field. When the previous buffer was split and then removed,
the pointer was no longer valid. Writing at this pointer resulted in broken
data chains.
Now last buffer is tracked by keeping a direct pointer to it.
The object is used instead of ngx_chain_t pointer for buffer operations like
ngx_quic_write_chain() and ngx_quic_read_chain(). These functions are renamed
to ngx_quic_write_buffer() and ngx_quic_read_buffer().
Such fatal errors are reported by OpenSSL 1.1.1, and similarly by BoringSSL,
if application data is encountered during SSL shutdown, which started to be
observed on the second SSL_shutdown() call after SSL shutdown fixes made in
09fb2135a589 (1.19.2). The error means that the client continues to send
application data after receiving the "close_notify" alert (ticket #2318).
Previously it was reported as SSL_shutdown() error of SSL_ERROR_SYSCALL.
Now ngx_quic_stream_t is decoupled from ngx_connection_t in a way that it
can persist after connection is closed by application. During this period,
server is expecting stream final size from client for correct flow control.
Also, buffered output is sent to client as more flow control credit is granted.
As shown in RFC 8446, section 2.2, Figure 3, and further specified in
section 4.6.1, BoringSSL releases session tickets in Application Data
(along with Finished) early, based on a precalculated client Finished
transcript, once client signalled early data in extensions.
Initially, frames are genereated and stored in ctx->frames.
Next, ngx_quic_output() collects frames to be sent in in ctx->sending.
On failure, ngx_quic_revert_sned() returns frames into ctx->frames.
On success, the ngx_quic_commit_send() moves ack-eliciting frames into
ctx->sent and frees non-ack-eliciting frames.
This function also updates in-flight bytes counter, so only actually sent
frames are accounted.
The counter is decremented in the following cases:
- acknowledgment is received
- packet was declared lost
- we are discarding context completely
In each of this cases frame is removed from ctx->sent queue and in-flight
counter is accordingly decremented.
The patch fixes the case of discarding context - only removing frames
from ctx->sent must be followed by in-flight bytes counter decrement,
otherwise cg->in_flight could experience type underflow.
The issue appeared in b1676cd64dc9.
The cd8018bc81a5 fixed unintended send of non-padded initial packets,
but failed to restore context properly: only processed contexts need
to be restored. As a consequence, a packet number could be restored
from uninitialized value.
Previously, the flag could be reset after send_chain() with a limit, even
though there was room for more data. The application then started waiting for
a write event notification, which never happened.
Now the wev->ready flag is only reset when flow control is exhausted.
With large http2_max_concurrent_streams or http2_max_concurrent_pushes, more
than 255 ngx_http_v2_node_t structures might be allocated, eventually leading
to h2c->closed_nodes overflow when closing corresponding streams. This will
in turn result in additional allocations in ngx_http_v2_get_node_by_id().
While mostly harmless, it can result in excessive memory usage by a HTTP/2
connection, notably in configurations with many keepalive_requests allowed.
Fix is to use ngx_uint_t for h2c->closed_nodes instead of unsigned:8.
The switch happens when received byte counter reaches stream final size.
Previously, this state was skipped. The stream went from SIZE_KNOWN to
DATA_READ when all bytes were read by application.
The change prevents STOP_SENDING frames from being sent when all data is
received from client, but not yet fully read by application.
Previously, size was calculated based on the number of input bytes processed
by the function. Now only the copied bytes are considered. This prevents
overlapping buffers from contributing twice to the overall written size.
Response headers can be buffered in the SSL buffer. But stream's fake
connection buffered flag did not reflect this, so any attempts to flush
the buffer without sending additional data were stopped by the write filter.
It does not seem to be possible to reflect this in fc->buffered though, as
we never known if main connection's c->buffered corresponds to the particular
stream or not. As such, fc->buffered might prevent request finalization
due to sending data on some other stream.
Fix is to implement handling of flush buffers when the c->need_flush_buf
flag is set, similarly to the existing last buffer handling. The same
flag is now used for UDP sockets in the stream module instead of explicit
checking of c->type.
Previously, non-padded initial packet could be sent as a result of the
following situation:
- initial queue is not empty (so padding to 1200 is required)
- handshake queue is not empty (so padding is to be added after h/s packet)
- path is limited
If serializing handshake packet would violate path limit, such packet was
omitted, and the non-padded initial packet was sent.
The fix is to avoid sending the packet at all in such case. This follows the
original intention introduced in c5155a0cb12f.
During configuration reload two cache managers might exist for a short
time. If both tried to delete the same cache node, the "ignore long locked
inactive cache entry" alert appeared in logs. Additionally,
ngx_http_file_cache_forced_expire() might be also called by worker
processes, with similar results.
Fix is to ignore cache nodes being deleted, similarly to how it is
done in ngx_http_file_cache_expire() since 3755:76e3a93821b1. This
was somehow missed in 7002:ab199f0eb8e8, when ignoring long locked
cache entries was introduced in ngx_http_file_cache_forced_expire().
- wording in log->action is adjusted to match function names.
- connection close steps are made obvious and start with "quic close" prefix:
*1 quic close initiated rc:-4
*1 quic close silent drain:0 timedout:1
*1 quic close resumed rc:-1
*1 quic close resumed rc:-1
*1 quic close resumed rc:-4
*1 quic close completed
this makes it easy to understand if particular "close" record is an initial
cause or lasting process, or the final one.
- cases of close without quic connection now logged as "packet rejected":
*14 quic run
*14 quic packet rx long flags:ec version:1
*14 quic packet rx hs len:61
*14 quic packet rx dcid len:20 00000000000002c32f60e4aa2b90a64a39dc4228
*14 quic packet rx scid len:8 81190308612cd019
*14 quic expected initial, got handshake
*14 quic packet done rc:-1 level:hs decr:0 pn:0 perr:0
*14 quic packet rejected rc:-1, cleanup connection
*14 reusable connection: 0
this makes it easy to spot early packet rejection and avoid confuse with
quic connection closing (which in fact was not even created).
- packet processing summary now uses same prefix "quic packet done rc:"
- added debug to places where packet was rejected without any reason logged
The NGX_DECLINED is replaced with NGX_DONE to match closer to return code
of ngx_quic_handle_packet() and ngx_quic_close_connection() rc argument.
The ngx_quic_close_connection() rc code is used only when quic connection
exists, thus anything goes if qc == NULL.
The ngx_quic_handle_datagram() does not return NG_OK in cases when quic
connection is not yet created.
Previously, closure detection for server-initiated uni streams was not properly
implemented. Instead, HTTP/3 code relied on QUIC code posting the read event
and setting rev->error when it needed to close the stream. Then, regular
uni stream read handler called c->recv() and received error, which closed the
stream. This was an ad-hoc solution. If, for whatever reason, the read
handler was called earlier, c->recv() would return 0, which would also close
the stream.
Now server-initiated uni streams have a separate read event handler for
tracking stream closure. The handler calls c->recv(), which normally returns
0, but may return error in case of closure.
Sending the instruction is delayed until the end of the current event cycle.
Delaying the instruction is allowed by quic-qpack-21, section 2.2.2.3.
The goal is to reduce the amount of data sent back to client by accumulating
several inserts in one instruction and sometimes not sending the instruction at
all, if Section Acknowledgement was sent just before it.
Operations like ngx_quic_open_stream(), ngx_http_quic_get_connection(),
ngx_http_v3_finalize_connection(), ngx_http_v3_shutdown_connection() used to
receive a QUIC stream connection. Now they can receive the main QUIC
connection as well. This is useful when calling them from a stream context.
This is to ease transition with oldish BoringSSL versions,
the default for SSL_set_quic_use_legacy_codepoint() has been
flipped in BoringSSL a1d3bfb64fd7ef2cb178b5b515522ffd75d7b8c5.
Chrome only uses TLS session tickets once with TLS 1.3, likely following
RFC 8446 Appendix C.4 recommendation. With OpenSSL, this works fine with
built-in session tickets, since these are explicitly renewed in case of
TLS 1.3 on each session reuse, but results in only two connections being
reused after an initial handshake when using ssl_session_ticket_key.
Fix is to always renew TLS session tickets in case of TLS 1.3 when using
ssl_session_ticket_key, similarly to how it is done by OpenSSL internally.
