In the following configuration request was sent to a backend without
URI changed to '/' due to if:
location /proxy-pass-uri {
proxy_pass http://127.0.0.1:8080/;
set $true 1;
if ($true) {
# nothing
}
}
Fix is to inherit conf->location from the location where proxy_pass was
configured, much like it's done with conf->vars.
The proxy_pass directive and other handlers are not expected to be inherited
into nested locations, but there is a special code to inherit upstream
handlers into limit_except blocks, as well as a configuration into if{}
blocks. This caused incorrect behaviour in configurations with nested
locations and limit_except blocks, like this:
location / {
proxy_pass http://u;
location /inner/ {
# no proxy_pass here
limit_except GET {
# nothing
}
}
}
In such a configuration the limit_except block inside "location /inner/"
unexpectedly used proxy_pass defined in "location /", while it shouldn't.
Fix is to avoid inheritance of conf->upstream.upstream (and
conf->proxy_lengths) into locations which don't have noname flag.
Instead of independant inheritance of conf->upstream.upstream (proxy_pass
without variables) and conf->proxy_lengths (proxy_pass with variables)
we now test them both and inherit only if neither is set. Additionally,
SSL context is also inherited only in this case now.
Based on the patch by Alexey Radkov.
RFC7232 says:
The 304 (Not Modified) status code indicates that a conditional GET
or HEAD request has been received and would have resulted in a 200
(OK) response if it were not for the fact that the condition
evaluated to false.
which means that there is no reason to send requests with "If-None-Match"
and/or "If-Modified-Since" headers for responses cached with other status
codes.
Also, sending conditional requests for responses cached with other status
codes could result in a strange behavior, e.g. upstream server returning
304 Not Modified for cached 404 Not Found responses, etc.
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
In case of a cache lock timeout and in the aio handler we now call
r->write_event_handler() instead of a connection write handler,
to make sure to run appropriate subrequest. Previous code failed to run
inactive subrequests and hence resulted in suboptimal behaviour, see
report by Yichun Zhang:
http://mailman.nginx.org/pipermail/nginx-devel/2013-October/004435.html
(Infinite hang claimed in the report seems impossible without 3rd party
modules, as subrequests will be eventually woken up by the postpone filter.)
To ensure proper logging make sure to set current_request in all event
handlers, including resolve, ssl handshake, cache lock wait timer and
aio read handlers. A macro ngx_http_set_log_request() introduced to
simplify this.
The alert was introduced in 03ff14058272 (1.5.4), and was triggered on each
post_action invocation.
There is no real need to call header filters in case of post_action,
so return NGX_OK from ngx_http_send_header() if r->post_action is set.
This helps to avoid delays in sending the last chunk of data because
of bad interaction between Nagle's algorithm on nginx side and
delayed ACK on the client side.
Delays could also be caused by TCP_CORK/TCP_NOPUSH if SPDY was
working without SSL and sendfile() was used.
The upstream modules remove and alter a number of client headers
before sending the request to upstream. This set of headers is
smaller or even empty when cache is disabled.
It's still possible that a request in a cache-enabled location is
uncached, for example, if cache entry counter is below min_uses.
In this case it's better to alter a smaller set of headers and
pass more client headers to backend unchanged. One of the benefits
is enabling server-side byte ranges in such requests.
Once this age is reached, the cache lock is discarded and another
request can acquire the lock. Requests which failed to acquire
the lock are not allowed to cache the response.
For further progress a new buffer must be at least two bytes larger than
the remaining unparsed data. One more byte is needed for null-termination
and another one for further progress. Otherwise inflate() fails with
Z_BUF_ERROR.
Previously, nginx would emit empty values in a header with multiple,
NULL-separated values.
This is forbidden by the SPDY specification, which requires headers to
have either a single (possibly empty) value or multiple, NULL-separated
non-empty values.
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
When got multiple upstream IP addresses using DNS resolving, the number of
upstreams tries and the maxinum time spent for these tries were not affected.
This patch fixed it.
Spaces in Accept-Charset, Accept-Encoding, and Accept-Language headers
are now ignored. As per syntax of these headers spaces can only appear
in places where they are optional.
If a variant stored can't be used to respond to a request, the variant
hash is used as a secondary key.
Additionally, if we previously switched to a secondary key, while storing
a response to cache we check if the variant hash still apply. If not, we
switch back to the original key, to handle cases when Vary changes.
To cache responses with Vary, we now calculate hash of headers listed
in Vary, and return the response from cache only if new request headers
match.
As of now, only one variant of the same resource can be stored in cache.
Previous code resulted in transfer stalls when client happened
to read all the data in buffers at once, while all gzip buffers
were exhausted (but ctx->nomem wasn't set). Make sure to call
next body filter at least once per call if there are busy buffers.
Additionally, handling of calls with NULL chain was changed to follow
the same logic, i.e., next body filter is only called with NULL chain
if there are busy buffers. This is expected to fix "output chain is empty"
alerts as reported by some users after c52a761a2029 (1.5.7).
Due to the u->headers_in.last_modified_time not being correctly initialized,
this variable was evaluated to "Thu, 01 Jan 1970 00:00:00 GMT" for responses
cached without the "Last-Modified" header which resulted in subsequent proxy
requests being sent with "If-Modified-Since: Thu, 01 Jan 1970 00:00:00 GMT"
header.
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
The c->sent is reset to 0 on each request by server-side http code,
so do the same on client side. This allows to count number of bytes
sent in a particular request.
One intentional side effect of this change is that key is allowed only
in the first position. Previously, it was possible to specify the key
variable at any position, but that was never documented, and is contrary
with nginx configuration practice for positional parameters.
One intentional side effect of this change is that key is allowed only
in the first position. Previously, it was possible to specify the key
variable at any position, but that was never documented, and is contrary
to nginx configuration practice for positional parameters.
Previously, a file buffer start position was reset to the file start.
Now it's reset to the previous file buffer end. This fixes
reinitialization of requests having multiple successive parts of a
single file. Such requests are generated by fastcgi module.
The new directives {proxy,fastcgi,scgi,uwsgi,memcached}_next_upstream_tries
and {proxy,fastcgi,scgi,uwsgi,memcached}_next_upstream_timeout limit
the number of upstreams tried and the maximum time spent for these tries
when searching for a valid upstream.
