The "ngx_quit" may be reset by the worker thread before it's seen
by a ngx_cache_manager_thread(), resulting in an infinite loop. Make
sure to test ngx_exiting as well.
This brings Cygwin compilation in line with other case-insensitive
systems (notably win32 and OS X) where one can force case sensitivity
using -DNGX_HAVE_CASELESS_FILESYSTEM=0.
Linux returns EOPNOTSUPP for non-TCP sockets and ENOPROTOOPT for TCP
sockets, because getsockopt(TCP_FASTOPEN) is not implemented so far.
While there, lower the log level from ALERT to NOTICE to match other
getsockopt() failures.
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Recent Linux versions started to return EOPNOTSUPP to getsockopt() calls
on unix sockets, resulting in log pollution on binary upgrade. Such errors
are silently ignored now.
This patch fixes incorrect handling of auto redirect in configurations
like:
location /0 { }
location /a- { }
location /a/ { proxy_pass ... }
With previously used sorting, this resulted in the following locations
tree (as "-" is less than "/"):
"/a-"
"/0" "/a/"
and a request to "/a" didn't match "/a/" with auto_redirect, as it
didn't traverse relevant tree node during lookup (it tested "/a-",
then "/0", and then falled back to null location).
To preserve locale use for non-ASCII characters on case-insensetive
systems, libc's tolower() used.
Several warnings silenced, notably (ngx_socket_t) -1 is now checked
on socket operations instead of -1, as ngx_socket_t is unsigned on win32
and gcc complains on comparison.
With this patch, it's now possible to compile nginx using mingw gcc,
with options we normally compile on win32.
Several false positive warnings silenced, notably W8012 "Comparing
signed and unsigned" (due to u_short values promoted to int), and
W8072 "Suspicious pointer arithmetic" (due to large type values added
to pointers).
With this patch, it's now again possible to compile nginx using bcc32,
with options we normally compile on win32 minus ipv6 and ssl.
Precompiled headers are disabled as they lead to internal compiler errors
with long configure lines. Couple of false positive warnings silenced.
Various win32 typedefs are adjusted to work with Open Watcom C 1.9 headers.
With this patch, it's now again possible to compile nginx using owc386,
with options we normally compile on win32 minus ipv6 and ssl.
It was introduced in Linux 2.6.39, glibc 2.14 and allows to obtain
file descriptors without actually opening files. Thus made it possible
to traverse path with openat() syscalls without the need to have read
permissions for path components. It is effectively emulates O_SEARCH
which is missing on Linux.
O_PATH is used in combination with O_RDONLY. The last one is ignored
if O_PATH is used, but it allows nginx to not fail when it was built on
modern system (i.e. glibc 2.14+) and run with a kernel older than 2.6.39.
Then O_PATH is unknown to the kernel and ignored, while O_RDONLY is used.
Sadly, fstat() is not working with O_PATH descriptors till Linux 3.6.
As a workaround we fallback to fstatat() with the AT_EMPTY_PATH flag
that was introduced at the same time as O_PATH.
It was broken in 8e446a2daf48 when the NGX_SENDFILE_LIMIT constant was added
to ngx_linux_sendfile_chain.c having the same name as already defined one in
ngx_linux_config.h.
The newer is needed to overcome a bug in old Linux kernels by limiting the
number of bytes to send per sendfile() syscall. The older is used with
sendfile() on ancient kernels that works with 32-bit offsets only.
One of these renamed to NGX_SENDFILE_MAXSIZE.
In ngx_*_sendfile_chain() when calculating pointer to a first
non-zero sized buf, use "in" as iterator. This fixes processing
of zero sized buf(s) after EINTR. Otherwise function can return
zero sized buf to caller, and later ngx_http_write_filter()
logs warning.
Currently this flag is needed for epoll and rtsig, and though these methods
usually present on different platforms than kqueue, nginx can be compiled to
support all of them.
On Linux x32 inclusion of sys/sysctl.h produces an error. As sysctl() is
only used by rtsig event method code, which is legacy and not compiled
in by default on modern linuxes, the sys/sysctl.h file now only included
if rtsig support is enabled.
Based on patch by Serguei I. Ivantsov.
When several "error_log" directives are specified in the same configuration
block, logs are written to all files with a matching log level.
All logs are stored in the singly-linked list that is sorted by log level in
the descending order.
Specific debug levels (NGX_LOG_DEBUG_HTTP,EVENT, etc.) are not supported
if several "error_log" directives are specified. In this case all logs
will use debug level that has largest absolute value.
Valgrind complains if we pass uninitialized memory to a syscall:
==36492== Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised byte(s)
==36492== at 0x6B5E6A: sendmsg (in /usr/lib/system/libsystem_kernel.dylib)
==36492== by 0x10004288E: ngx_signal_worker_processes (ngx_process_cycle.c:527)
==36492== by 0x1000417A7: ngx_master_process_cycle (ngx_process_cycle.c:203)
==36492== by 0x100001F10: main (nginx.c:410)
==36492== Address 0x7fff5fbff71c is on thread 1's stack
Even initialization of all members of the structure passed isn't enough, as
there is padding which still remains uninitialized and results in Valgrind
complaint. Note there is no real problem here as data from uninitialized
memory isn't used.
Valgrind intercepts SIGUSR2 in some cases, and nginx might not be able to
start due to sigaction() failure. If compiled with NGX_VALGRIND defined,
we now ignore the failure of sigaction().
On Win32 platforms 0 is used to indicate errors in file operations, so
comparing against -1 is not portable.
This was not much of an issue in patched code, since only ngx_fd_info() test
is actually reachable on Win32 and in worst case it might result in bogus
error log entry.
Patch by Piotr Sikora.
The crypt_r() function returns NULL on errors, check it explicitly instead
of assuming errno will remain 0 if there are no errors (per POSIX, the
setting of errno after a successful call to a function is unspecified
unless the description of that function specifies that errno shall not
be modified).
Additionally, dropped unneeded ngx_set_errno(0) and fixed error handling
of memory allocation after normal crypt(), which was inapropriate and
resulted in null pointer dereference on allocation failures.
This includes "debug_connection", upstreams, "proxy_pass", etc.
(ticket #92)
To preserve compatibility, "listen" specified with a domain name
selects the first IPv4 address, if available. If not available,
the first IPv6 address will be used (ticket #186).
This will result in alphabetical sorting of included files if
the "include" directive with wildcards is used.
Note that the behaviour is now different from that on Windows, where
alphabetical sorting is not guaranteed for FindFirsFile()/FindNextFile()
(used to be alphabetical on NTFS, but not on FAT).
Approved by Igor Sysoev, prodded by many.
Catched by dav_chunked.t on Solaris. In released versions this might
potentially result in corruption of complex protocol responses if they
were written to disk and there were more distinct buffers than IOV_MAX
in a single write.
This fixes unwanted/incorrect cpu_affinity use on dead worker processes
respawn. While this is not ideal, it's expected to be better when previous
situation where multiple processes were spawn with identical CPU affinity
set.
Reported by Charles Chen.
The only thing we could potentially do here in case of error
returned is to complain to error log, but we don't have log
structure available here due to interface limitations.
Prodded by Coverity.
If ngx_spawn_process() failed while starting a process, the process
handle was closed but left non-NULL in the ngx_processes[] array.
The handle later was used in WaitForMultipleObjects() (if there
were multiple worker processes configured and at least one worker
process was started successfully), resulting in infinite loop.
Reported by Ricardo V G:
http://mailman.nginx.org/pipermail/nginx-devel/2012-July/002494.html
