*) Change: the "bl" and "af" parameters of the "listen" directive was
renamed to the "backlog" and "accept_filter".
*) Feature: the "rcvbuf" and "sndbuf" parameters of the "listen"
directive.
*) Change: the "$msec" log parameter does not require now the
additional the gettimeofday() system call.
*) Feature: the -t switch now tests the "listen" directives.
*) Bugfix: if the invalid address was specified in the "listen"
directive, then after the -HUP signal nginx left an open socket in
the CLOSED state.
*) Bugfix: the mime type may be incorrectly set to default value for
index file with variable in the name; the bug had appeared in 0.3.0.
*) Feature: the "timer_resolution" directive.
*) Feature: the millisecond "$upstream_response_time" log parameter.
*) Bugfix: a temporary file with client request body now is removed
just after the response header was transferred to a client.
*) Bugfix: OpenSSL 0.9.6 compatibility.
*) Bugfix: the SSL certificate and key file paths could not be relative.
*) Bugfix: the "ssl_prefer_server_ciphers" directive did not work in
the ngx_imap_ssl_module.
*) Bugfix: the "ssl_protocols" directive allowed to specify the single
protocol only.
*) Feature: the Sun Studio 10 C compiler support.
*) Feature: the "proxy_upstream_max_fails",
"proxy_upstream_fail_timeout", "fastcgi_upstream_max_fails", and
"fastcgi_upstream_fail_timeout" directives.
*) The pid-file names used during online upgrade was changed and now is
not required a manual rename operation. The old master process adds
the ".oldbin" suffix to its pid-file and executes a new binary file.
The new master process creates usual pid-file without the ".newbin"
suffix. If the master process exits, then old master process renames
back its pid-file with the ".oldbin" suffix to the pid-file without
suffix.
*) Change: the "worker_connections" directive, new name of the
"connections" directive; now the directive specifies maximum number
of connections, but not maximum socket descriptor number.
*) Feature: SSL supports the session cache inside one worker process.
*) Feature: the "satisfy_any" directive.
*) Change: the ngx_http_access_module and ngx_http_auth_basic_module do
not run for subrequests.
*) Feature: the "worker_rlimit_nofile" and "worker_rlimit_sigpending"
directives.
*) Bugfix: if all backend using in load-balancing failed after one
error, then nginx did not try do connect to them during 60 seconds.
*) Bugfix: in IMAP/POP3 command argument parsing.
Thanks to Rob Mueller.
*) Bugfix: errors while using SSL in IMAP/POP3 proxy.
*) Bugfix: errors while using SSI and gzipping.
*) Bugfix: the "Expires" and "Cache-Control" header lines were omitted
from the 304 responses.
Thanks to Alexandr Kukushkin.
*) Change: the "ssl_engine" directive was canceled in the
ngx_http_ssl_module and now is introduced at global level.
*) Bugfix: the responses with SSI subrequests did not transferred via
SSL connection.
*) Various bug fixes in the IMAP/POP3 proxy.
*) Feature: the ngx_http_ssi_module supports "include virtual" command.
*) Feature: the ngx_http_ssi_module supports the condition command like
'if expr="$NAME"' and "else" and "endif" commands. Only one nested
level is supported.
*) Feature: the ngx_http_ssi_module supports the DATE_LOCAL and
DATE_GMT variables and "config timefmt" command.
*) Feature: the "ssi_ignore_recycled_buffers" directive.
*) Bugfix: the "echo" command did not show the default value for the
empty QUERY_STRING variable.
*) Change: the ngx_http_proxy_module was rewritten.
*) Feature: the "proxy_redirect", "proxy_pass_request_headers",
"proxy_pass_request_body", and "proxy_method" directives.
*) Feature: the "proxy_set_header" directive. The "proxy_x_var" was
canceled and must be replaced with the proxy_set_header directive.
*) Change: the "proxy_preserve_host" is canceled and must be replaced
with the "proxy_set_header Host $host" and the "proxy_redirect off"
directives, the "proxy_set_header Host $host:$proxy_port" directive
and the appropriate proxy_redirect directives.
*) Change: the "proxy_set_x_real_ip" is canceled and must be replaced
with the "proxy_set_header X-Real-IP $remote_addr" directive.
*) Change: the "proxy_add_x_forwarded_for" is canceled and must be
replaced with
the "proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for"
directive.
*) Change: the "proxy_set_x_url" is canceled and must be replaced with
the "proxy_set_header X-URL http://$host:$server_port$request_uri"
directive.
*) Feature: the "fastcgi_param" directive.
*) Change: the "fastcgi_root", "fastcgi_set_var" and "fastcgi_params"
directive are canceled and must be replaced with the fastcgi_param
directives.
*) Feature: the "index" directive can use the variables.
*) Feature: the "index" directive can be used at http and server levels.
*) Change: the last index only in the "index" directive can be absolute.
*) Feature: the "rewrite" directive can use the variables.
*) Feature: the "internal" directive.
*) Feature: the CONTENT_LENGTH, CONTENT_TYPE, REMOTE_PORT, SERVER_ADDR,
SERVER_PORT, SERVER_PROTOCOL, DOCUMENT_ROOT, SERVER_NAME,
REQUEST_METHOD, REQUEST_URI, and REMOTE_USER variables.
*) Change: nginx now passes the invalid lines in a client request
headers or a backend response header.
*) Bugfix: if the backend did not transfer response for a long time and
the "send_timeout" was less than "proxy_read_timeout", then nginx
returned the 408 response.
*) Bugfix: the segmentation fault was occurred if the backend sent an
invalid line in response header; the bug had appeared in 0.1.26.
*) Bugfix: the segmentation fault may occurred in FastCGI fault
tolerance configuration.
*) Bugfix: the "expires" directive did not remove the previous
"Expires" and "Cache-Control" headers.
*) Bugfix: nginx did not take into account trailing dot in "Host"
header line.
*) Bugfix: the ngx_http_auth_module did not work under Linux.
*) Bugfix: the rewrite directive worked incorrectly, if the arguments
were in a request.
*) Bugfix: nginx could not be built on MacOS X.
*) Change: the invalid client header lines are now ignored and logged
at the info level.
*) Change: the server name is also logged in error log.
*) Feature: the ngx_http_auth_basic_module module and the auth_basic
and auth_basic_user_file directives.
*) Bugfix: nginx did run on Linux parisc.
*) Feature: nginx now does not start under FreeBSD if the sysctl
kern.ipc.somaxconn value is too big.
*) Bugfix: if a request was internally redirected by the
ngx_http_index_module module to the ngx_http_proxy_module or
ngx_http_fastcgi_module modules, then the index file was not closed
after request completion.
*) Feature: the "proxy_pass" can be used in location with regular
expression.
*) Feature: the ngx_http_rewrite_filter_module module supports the
condition like "if ($HTTP_USER_AGENT ~ MSIE)".
*) Bugfix: nginx started too slow if the large number of addresses and
text values were used in the "geo" directive.
*) Change: a variable name must be declared as "$name" in the "geo"
directive. The previous variant without "$" is still supported, but
will be removed soon.
*) Feature: the "%{VARIABLE}v" logging parameter.
*) Feature: the "set $name value" directive.
*) Bugfix: gcc 4.0 compatibility.
*) Feature: the --with-openssl-opt=OPTIONS autoconfiguration directive.
*) Feature: the ngx_http_ssi_filter_module supports the QUERY_STRING
and DOCUMENT_URI variables.
*) Bugfix: the ngx_http_autoindex_module may some times return the 404
response for existent directory, if this directory was used in
"alias" directive.
*) Bugfix: the ngx_http_ssi_filter_module ran incorrectly for large
responses.
*) Bugfix: the lack of the "Referer" header line was always accounted
as valid referrer.
*) Feature: the ngx_http_ssi_filter_module and the ssi,
ssi_silent_errors, and ssi_min_file_chunk directives. The 'echo
var="HTTP_..." default=""' and 'echo var="REMOTE_ADDR"' commands are
supported.
*) Feature: the %request_time log parameter.
*) Feature: if the request has no the "Host" header line, then the
"proxy_preserve_host" directive set this header line to the first
server name of the "server_name" directive.
*) Bugfix: nginx could not be built on platforms different from i386,
amd64, sparc, and ppc; the bug had appeared in 0.1.22.
*) Bugfix: the ngx_http_autoindex_module now shows the information not
about the symlink, but about file or directory it points to.
*) Bugfix: the %apache_length parameter logged the negative length of
the response header if the no response was transferred to a client.
*) Bugfix: the ngx_http_stub_status_module showed incorrect statistics
if "rtsig" method was used or if several worker process ran on SMP.
*) Bugfix: nginx could not be built by the icc compiler on Linux or if
the zlib-1.2.x library was building from sources.
*) Bugfix: nginx could not be built on NetBSD 2.0.
*) Bugfix: if the response were transferred by chunks, then on the HEAD
request the final chunk was issued.
*) Bugfix: the "Connection: keep-alive" header were issued, even if the
keepalive_timeout directive forbade the keep-alive use.
*) Bugfix: the errors in the ngx_http_fastcgi_module caused the
segmentation faults.
*) Bugfix: the compressed response encrypted by SSL may not transferred
complete.
*) Bugfix: the TCP-specific TCP_NODELAY, TCP_NOPSUH, and TCP_CORK
options, are not used for the unix domain sockets.
*) Feature: the rewrite directive supports the arguments rewriting.
*) Bugfix: the response code 400 was returned for the POST request with
the "Content-Length: 0" header; the bug had appeared in 0.1.14.
*) Feature: the autoconfiguration directives:
--http-client-body-temp-path=PATH, --http-proxy-temp-path=PATH, and
--http-fastcgi-temp-path=PATH
*) Change: the directory name for the temporary files with the client
request body is specified by directive client_body_temp_path, by
default it is <prefix>/client_body_temp.
*) Feature: the ngx_http_fastcgi_module and the directives:
fastcgi_pass, fastcgi_root, fastcgi_index, fastcgi_params,
fastcgi_connect_timeout, fastcgi_send_timeout, fastcgi_read_timeout,
fastcgi_send_lowat, fastcgi_header_buffer_size, fastcgi_buffers,
fastcgi_busy_buffers_size, fastcgi_temp_path,
fastcgi_max_temp_file_size, fastcgi_temp_file_write_size,
fastcgi_next_upstream, and fastcgi_x_powered_by.
*) Bugfix: the "[alert] zero size buf" error; the bug had appeared in
0.1.3.
*) Change: the URI must be specified after the host name in the
proxy_pass directive.
*) Change: the %3F symbol in the URI was considered as the argument
string start.
*) Feature: the unix domain sockets support in the
ngx_http_proxy_module.
*) Feature: the ssl_engine and ssl_ciphers directives.
Thanks to Sergey Skvortsov for SSL-accelerator.
*) Feature: the server_names_hash and server_names_hash_threshold
directives.
*) Bugfix: the *.domain.tld names in the "server_name" directive did
not work.
*) Bugfix: the %request_length log parameter logged the incorrect
length.
*) Feature: the worker_priority directive.
*) Change: both tcp_nopush and tcp_nodelay directives affect the
transferred response.
*) Bugfix: nginx did not call initgroups().
Thanks to Andrew Sitnikov and Andrei Nigmatulin.
*) Change: now the ngx_http_autoindex_module shows the file size in the
bytes.
*) Bugfix: the ngx_http_autoindex_module returned the 500 error if the
broken symlink was in a directory.
*) Bugfix: the files bigger than 4G could not be transferred using
sendfile.
*) Bugfix: if the backend was resolved to several backends and there
was an error while the response waiting then process may got caught
in an endless loop.
*) Bugfix: the worker process may exit with the "unknown cycle" message
when the /dev/poll method was used.
*) Bugfix: "close() channel failed" errors.
*) Bugfix: the autodetection of the "nobody" and "nogroup" groups.
*) Bugfix: the send_lowat directive did not work on Linux.
*) Bugfix: the segmentation fault occurred if there was no events
section in configuration.
*) Bugfix: nginx could not be built on OpenBSD.
*) Bugfix: the double slashes in "://" in the URI were converted to
":/".
*) Bugfix: the proxied request was sent without arguments if the
request contains "//", "/./", "/../" or "%XX".
*) Bugfix: the large compressed responses may be transferred not
completely.
*) Bugfix: the files bigger than 2G was not transferred on Linux that
does not support sendfile64().
*) Bugfix: while the build configuration on Linux the
--with-poll_module parameter was required; the bug had appeared in
0.1.8.
*) Bugfix: in the ngx_http_autoindex_module if the long file names were
in the listing.
*) Feature: the "^~" modifier in the location directive.
*) Feature: the proxy_max_temp_file_size directive.
*) Bugfix: on Solaris and Linux there may be too many "recvmsg()
returned not enough data" alerts.
*) Bugfix: there were the "writev() failed (22: Invalid argument)"
errors on Solaris in proxy mode without sendfile. On other platforms
that do not support sendfile at all the process got caught in an
endless loop.
*) Bugfix: segmentation fault on Solaris in proxy mode and using
sendfile.
*) Bugfix: segmentation fault on Solaris.
*) Bugfix: on-line upgrade did not work on Linux.
*) Bugfix: the ngx_http_autoindex_module module did not escape the
spaces, the quotes, and the percent signs in the directory listing.
*) Change: the decrease of the copy operations.
*) Feature: the userid_p3p directive.
*) Feature: the ngx_http_autoindex_module and the autoindex directive.
*) Feature: the proxy_set_x_url directive.
*) Bugfix: proxy module may get caught in an endless loop when sendfile
is not used.
*) Feature: the --user=USER, --group=GROUP, and --with-ld-opt=OPTIONS
options in configure.
*) Feature: the server_name directive supports *.domain.tld.
*) Bugfix: the portability improvements.
*) Bugfix: if configuration file was set in command line, the
reconfiguration was impossible; the bug had appeared in 0.1.1.
*) Bugfix: proxy module may get caught in an endless loop when sendfile
is not used.
*) Bugfix: with sendfile the response was not recoded according to the
charset module directives; the bug had appeared in 0.1.1.
*) Bugfix: very seldom bug in the kqueue processing.
*) Bugfix: the gzip module compressed the proxied responses that was
already compressed.
*) Feature: the gzip_types directive.
*) Feature: the tcp_nodelay directive.
*) Feature: the send_lowat directive is working not only on OSes that
support kqueue NOTE_LOWAT, but also on OSes that support SO_SNDLOWAT.
*) Feature: the setproctitle() emulation for Linux and Solaris.
*) Bugfix: the "Location" header rewrite bug fixed while the proxying.
*) Bugfix: the ngx_http_chunked_module module may get caught in an
endless loop.
*) Bugfix: the /dev/poll module bugs fixed.
*) Bugfix: the responses were corrupted when the temporary files were
used while the proxying.
*) Bugfix: the unescaped requests were passed to the backend.
*) Bugfix: while the build configuration on Linux 2.4 the
--with-poll_module parameter was required.
