Added logging before returning NGX_HTTP_INTERNAL_SERVER_ERROR if there
are busy buffers after a request body flush. This should never happen
with current code, though bugs can be introduced by 3rd party modules.
Make sure debugging will be easy enough.
When doing lingering close, the socket was first shut down for writing,
so SSL shutdown initiated after lingering close was not able to send
the close_notify alerts (ticket #2056).
The fix is to call ngx_ssl_shutdown() before shutting down the socket.
Now "s", "V", and "v" format specifiers may be prefixed with "x" (lowercase)
or "X" (uppercase) to output corresponding data in hexadecimal format.
In collaboration with Maxim Dounin.
In some cases it might be needed to reject SSL handshake based on SNI
server name provided, for example, to make sure an invalid certificate
is not returned to clients trying to contact a name-based virtual server
without SSL configured. Previously, a "ssl_ciphers aNULL;" was used for
this. This workaround, however, is not compatible with TLSv1.3, in
particular, when using BoringSSL, where it is not possible to configure
TLSv1.3 ciphers at all.
With this change, the ssl_reject_handshake directive is introduced,
which instructs nginx to reject SSL handshakes with an "unrecognized_name"
alert in a particular server block.
For example, to reject handshake with names other than example.com,
one can use the following configuration:
server {
listen 443 ssl;
ssl_reject_handshake on;
}
server {
listen 443 ssl;
server_name example.com;
ssl_certificate example.com.crt;
ssl_certificate_key example.com.key;
}
The following configuration can be used to reject all SSL handshakes
without SNI server name provided:
server {
listen 443 ssl;
ssl_reject_handshake on;
}
server {
listen 443 ssl;
server_name ~^;
ssl_certificate example.crt;
ssl_certificate_key example.key;
}
Additionally, the ssl_reject_handshake directive makes configuring
certificates for the default server block optional. If no certificates
are configured in the default server for a given listening socket,
certificates must be defined in all non-default server blocks with
the listening socket in question.
Similarly to ssl_conf_command, proxy_ssl_conf_command can be used to
set arbitrary OpenSSL configuration parameters as long as nginx is
compiled with OpenSSL 1.0.2 or later, when connecting to upstream
servers with SSL. Full list of available configuration commands
can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
Similarly to ssl_conf_command, proxy_ssl_conf_command (grpc_ssl_conf_command,
uwsgi_ssl_conf_command) can be used to set arbitrary OpenSSL configuration
parameters as long as nginx is compiled with OpenSSL 1.0.2 or later,
when connecting to upstream servers with SSL. Full list of available
configuration commands can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
With the ssl_conf_command directive it is now possible to set
arbitrary OpenSSL configuration parameters as long as nginx is compiled
with OpenSSL 1.0.2 or later. Full list of available configuration
commands can be found in the SSL_CONF_cmd manual page
(https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html).
In particular, this allows configuring PrioritizeChaCha option
(ticket #1445):
ssl_conf_command Options PrioritizeChaCha;
It can be also used to configure TLSv1.3 ciphers in OpenSSL,
which fails to configure them via the SSL_CTX_set_cipher_list()
interface (ticket #1529):
ssl_conf_command Ciphersuites TLS_CHACHA20_POLY1305_SHA256;
Configuration commands are applied after nginx own configuration
for SSL, so they can be used to override anything set by nginx.
Note though that configuring OpenSSL directly with ssl_conf_command
might result in a behaviour nginx does not expect, and should be
done with care.
With this change, it is now possible to use ngx_conf_merge_ptr_value()
to merge keyval arrays. This change actually follows much earlier
changes in ngx_conf_merge_ptr_value() and ngx_conf_set_str_array_slot()
in 1452:cd586e963db0 (0.6.10) and 1701:40d004d95d88 (0.6.22).
To preserve compatibility with existing 3rd party modules, both NULL
and NGX_CONF_UNSET_PTR are accepted for now.
Previously, if there were multiple limits configured, errors in
ngx_http_complex_value() during processing of a non-first limit
resulted in reference count leak in shared memory nodes of already
processed limits. Fix is to explicity unlock relevant nodes, much
like we do when rejecting requests.
The proxy_smtp_auth directive instructs nginx to authenticate users
on backend via the AUTH command (using the PLAIN SASL mechanism),
similar to what is normally done for IMAP and POP3.
If xclient is enabled along with proxy_smtp_auth, the XCLIENT command
won't try to send the LOGIN parameter.
In 7717:e3e8b8234f05, the 1st bit was incorrectly used. It shouldn't
be used for bitmask values, as it is used by NGX_CONF_BITMASK_SET.
Additionally, special value "off" added to make it possible to clear
inherited userid_flags value.
The "false" parameter of the proxy_redirect directive is deprecated.
Warning has been emitted since c2230102df6f (0.7.54).
The "off" parameter of the proxy_redirect, proxy_cookie_domain, and
proxy_cookie_path directives tells nginx not to inherit the
configuration from the previous configuration level.
Previously, after specifying the directive with the "off" parameter,
any other directives were ignored, and syntax checking was disabled.
The syntax was enforced to allow either one directive with the "off"
parameter, or several directives with other parameters.
Also, specifying "proxy_redirect default foo" no longer works like
"proxy_redirect default".
In rare cases, such as memory allocation failure, SSL_set_SSL_CTX() returns
NULL, which could mean that a different SSL configuration has not been set.
Note that this new behaviour seemingly originated in OpenSSL-1.1.0 release.
HTTP/2 code failed to run posted requests after calling the request body
handler, and this resulted in connection hang if a subrequest was created
in the body handler and no other actions were made.
If 400 errors were redirected to an upstream server using the error_page
directive, DATA frames from the client might cause segmentation fault
due to null pointer dereference. The bug had appeared in 6989:2c4dbcd6f2e4
(1.13.0).
Fix is to skip such frames in ngx_http_v2_state_read_data() (similarly
to 7561:9f1f9d6e056a). With the fix, behaviour of 400 errors in HTTP/2
is now similar to one in HTTP/1.x, that is, nginx doesn't try to read the
request body.
Note that proxying 400 errors, as well as other early stage errors, to
upstream servers might not be a good idea anyway. These errors imply
that reading and processing of the request (and the request headers)
wasn't complete, and proxying of such incomplete request might lead to
various errors.
Reported by Chenglong Zhang.
This fixes "SSL_shutdown() failed (SSL: ... bad write retry)" errors
as observed on the second SSL_shutdown() call after SSL shutdown fixes in
09fb2135a589 (1.19.2), notably when HTTP/2 connections are closed due
to read timeouts while there are incomplete writes.
This fixes "SSL_shutdown() failed (SSL: ... bad write retry)" errors
as observed on the second SSL_shutdown() call after SSL shutdown fixes in
09fb2135a589 (1.19.2), notably when sending fails in ngx_http_test_expect(),
similarly to ticket #1194.
Note that there are some places where c->error is misused to prevent
further output, such as ngx_http_v2_finalize_connection() if there
are pending streams, or in filter finalization. These places seem
to be extreme enough to don't care about missing shutdown though.
For example, filter finalization currently prevents keepalive from
being used.
The c->read->ready and c->write->ready flags need to be cleared to ensure
that appropriate read or write events will be reported by kernel. Without
this, SSL shutdown might wait till the timeout after blocking on writing
or reading even if there is a socket activity.
OpenSSL 1.1.1 fails to return SSL_ERROR_SYSCALL if an error happens
during SSL_write() after close_notify alert from the peer, and returns
SSL_ERROR_ZERO_RETURN instead. Broken by this commit, which removes
the "i == 0" check around the SSL_RECEIVED_SHUTDOWN one:
https://git.openssl.org/?p=openssl.git;a=commitdiff;h=8051ab2
In particular, if a client closed the connection without reading
the response but with properly sent close_notify alert, this resulted in
unexpected "SSL_write() failed while ..." critical log message instead
of correct "SSL_write() failed (32: Broken pipe)" at the info level.
Since SSL_ERROR_ZERO_RETURN cannot be legitimately returned after
SSL_write(), the fix is to convert all SSL_ERROR_ZERO_RETURN errors
after SSL_write() to SSL_ERROR_SYSCALL.
If the variant hash doesn't match one we used as a secondary cache key,
we switch back to the original key. In this case, c->body_start was kept
updated from an existing cache node overwriting the new response value.
After file cache update, it led to discrepancy between a cache node and
cache file seen as critical errors "file cache .. has too long header".
Previously, a variant not present in shared memory and stored on disk using a
secondary key was read using c->body_start from a variant stored with a main
key. This could result in critical errors "cache file .. has too long header".
Previously the stale-if-error extension of the Cache-Control upstream header
triggered the return of a stale response for all error conditions that can be
specified in the proxy_cache_use_stale directive. The list of these errors
includes both network/timeout/format errors, as well as some HTTP codes like
503, 504, 403, 429 etc. The latter prevented a cache entry from being updated
by a response with any of these HTTP codes during the stale-if-error period.
Now stale-if-error only works for network/timeout/format errors and ignores
the upstream HTTP code. The return of a stale response for certain HTTP codes
is still possible using the proxy_cache_use_stale directive.
This change also applies to the stale-while-revalidate extension of the
Cache-Control header, which triggers stale-if-error if it is missing.
Reported at
http://mailman.nginx.org/pipermail/nginx/2020-July/059723.html.
Reworked connections reuse, so closing connections is attempted in
advance, as long as number of free connections is less than 1/16 of
worker connections configured. This ensures that new connections can
be handled even if closing a reusable connection requires some time,
for example, for a lingering close (ticket #2017).
The 1/16 ratio is selected to be smaller than 1/8 used for disabling
accept when working with accept mutex, so nginx will try to balance
new connections to different workers first, and will start reusing
connections only if this won't help.
Previously, reusing connections happened silently and was only
visible in monitoring systems. This was shown to be not very user-friendly,
and administrators often didn't realize there were too few connections
available to withstand the load, and configured timeouts (keepalive_timeout
and http2_idle_timeout) were effectively reduced to keep things running.
To provide at least some information about this, a warning is now logged
(at most once per second, to avoid flooding the logs).
Sending shutdown when ngx_http_test_reading() detects the connection is
closed can result in "SSL_shutdown() failed (SSL: ... bad write retry)"
critical log messages if there are blocked writes.
Fix is to avoid sending shutdown via the c->ssl->no_send_shutdown flag,
similarly to how it is done in ngx_http_keepalive_handler() for kqueue
when pending EOF is detected.
Reported by Jan Prachař
(http://mailman.nginx.org/pipermail/nginx-devel/2018-December/011702.html).
Without the flag, SSL shutdown is attempted on such connections,
resulting in useless work and/or bogus "SSL_shutdown() failed
(SSL: ... bad write retry)" critical log messages if there are
blocked writes.
Previously, bidirectional shutdown never worked, due to two issues
in the code:
1. The code only tested SSL_ERROR_WANT_READ and SSL_ERROR_WANT_WRITE
when there was an error in the error queue, which cannot happen.
The bug was introduced in an attempt to fix unexpected error logging
as reported with OpenSSL 0.9.8g
(http://mailman.nginx.org/pipermail/nginx/2008-January/003084.html).
2. The code never called SSL_shutdown() for the second time to wait for
the peer's close_notify alert.
This change fixes both issues.
Note that after this change bidirectional shutdown is expected to work for
the first time, so c->ssl->no_wait_shutdown now makes a difference. This
is not a problem for HTTP code which always uses c->ssl->no_wait_shutdown,
but might be a problem for stream and mail code, as well as 3rd party
modules.
To minimize the effect of the change, the timeout, which was used to be 30
seconds and not configurable, though never actually used, is now set to
3 seconds. It is also expanded to apply to both SSL_ERROR_WANT_READ and
SSL_ERROR_WANT_WRITE, so timeout is properly set if writing to the socket
buffer is not possible.
If some additional data from a pipelined request happens to be
read into the body buffer, we copy it to r->header_in or allocate
an additional large client header buffer for it.
This ensures that copying won't write more than the buffer size
even if the buffer comes from hc->free and it is smaller than the large
client header buffer size in the virtual host configuration. This might
happen if size of large client header buffers is different in name-based
virtual hosts, similarly to the problem with number of buffers fixed
in 6926:e662cbf1b932.
