*) Feature: now is possible to do several redirection using the
"error_page" directive.
*) Bugfix: the "dav_access" directive did not support three parameters.
*) Bugfix: the "error_page" directive did not changes the
"Content-Type" header line after the "X-Accel-Redirect" was used;
the bug had appeared in 0.3.58.
*) Feature: the "error_page" directive supports the variables.
*) Change: now the procfs interface instead of sysctl is used on Linux.
*) Change: now the "Content-Type" header line is inherited from first
response when the "X-Accel-Redirect" was used.
*) Bugfix: the "error_page" directive did not redirect the 413 error.
*) Bugfix: the trailing "?" did not remove old arguments if no new
arguments were added to a rewritten URI.
*) Bugfix: nginx could not run on 64-bit FreeBSD 7.0-CURRENT.
*) Feature: the $ssl_client_serial variable.
*) Bugfix: in the "!-e" operator of the "if" directive.
Thanks to Andrian Budanstov.
*) Bugfix: while a client certificate verification nginx did not send
to a client the required certificates information.
*) Bugfix: the $document_root variable did not support the variables in
the "root" directive.
*) Feature: the "dav_access" directive.
*) Feature: the "if" directive supports the "-d", "!-d", "-e", "!-e",
"-x", and "!-x" operators.
*) Bugfix: a segmentation fault occurred if a request returned a
redirect and some sent to client header lines were logged in the
access log.
*) Feature: the "stub" parameter in the "include" SSI command.
*) Feature: the "block" SSI command.
*) Feature: the unicode2nginx script was added to contrib.
*) Bugfix: if a "root" was specified by variable only, then the root
was relative to a server prefix.
*) Bugfix: if the request contained "//" or "/./" and escaped symbols
after them, then the proxied request was sent unescaped.
*) Bugfix: the $r->headers_in("Cookie") of the ngx_http_perl_module now
returns all "Cookie" header lines.
*) Bugfix: a segmentation fault occurred if
"client_body_in_file_only on" was used and nginx switched to a next
upstream.
*) Bugfix: on some condition while reconfiguration character codes
inside the "charset_map" may be treated invalid; the bug had
appeared in 0.3.50.
*) Feature: nginx now logs the subrequest information to the error log.
*) Feature: the "proxy_next_upstream", "fastcgi_next_upstream", and
"memcached_next_upstream" directives support the "off" parameter.
*) Feature: the "debug_connection" directive supports the CIDR address
form.
*) Bugfix: if a response of proxied server or FastCGI server was
converted from UTF-8 or back, then it may be transferred incomplete.
*) Bugfix: the $upstream_response_time variable had the time of the
first request to a backend only.
*) Bugfix: nginx could not be built on amd64 platform; the bug had
appeared in 0.3.53.
*) Change: the "add_header" directive adds the string to 204, 301, and
302 responses.
*) Feature: the "server" directive in the "upstream" context supports
the "weight" parameter.
*) Feature: the "server_name" directive supports the "*" wildcard.
*) Feature: nginx supports the request body size more than 2G.
*) Bugfix: if a client was successfully authorized using "satisfy_any
on", then anyway the message "access forbidden by rule" was written
in the log.
*) Bugfix: the "PUT" method may erroneously not create a file and
return the 409 code.
*) Bugfix: if the IMAP/POP3 backend returned an error, then nginx
continued proxying anyway.
*) Change: the ngx_http_index_module behavior for the "POST /" requests
is reverted to the 0.3.40 version state: the module now does not
return the 405 error.
*) Bugfix: the worker process may got caught in an endless loop if the
limit rate was used; the bug had appeared in 0.3.37.
*) Bugfix: ngx_http_charset_module logged "unknown charset" alert, even
if the recoding was not needed; the bug had appeared in 0.3.50.
*) Bugfix: if a code response of the PUT request was 409, then a
temporary file was not removed.
*) Change: the "proxy_redirect_errors" and "fastcgi_redirect_errors"
directives was renamed to the "proxy_intercept_errors" and
"fastcgi_intercept_errors" directives.
*) Feature: the ngx_http_charset_module supports the recoding from the
single byte encodings to the UTF-8 encoding and back.
*) Feature: the "X-Accel-Charset" response header line is supported in
proxy and FastCGI mode.
*) Bugfix: the "\" escape symbol in the "\"" and "\'" pairs in the SSI
command was removed only if the command also has the "$" symbol.
*) Bugfix: the "<!--" string might be added on some conditions in the
SSI after inclusion.
*) Bugfix: if the "Content-Length: 0" header line was in response, then
in nonbuffered proxying mode the client connection was not closed.
*) Bugfix: in the "set" directive.
*) Bugfix: if two or more FastCGI subrequests was in SSI, then first
subrequest output was included instead of second and following
subrequests.
*) Change: now the ngx_http_charset_module works for subrequests, if
the response has no "Content-Type" header line.
*) Bugfix: if the "proxy_pass" directive has no URI part, then the
"proxy_redirect default" directive add the unnecessary slash in
start of the rewritten redirect.
*) Bugfix: the internal redirect always transform client's HTTP method
to GET, now the transformation is made for the "X-Accel-Redirect"
redirects only and if the method is not HEAD; the bug had appeared
in 0.3.42.
*) Bugfix: the ngx_http_perl_module could not be built, if the perl was
built with the threads support; the bug had appeared in 0.3.46.
*) Feature: the "proxy_hide_header", "proxy_pass_header",
"fastcgi_hide_header", and "fastcgi_pass_header" directives.
*) Change: the "proxy_pass_x_powered_by", "fastcgi_x_powered_by", and
"proxy_pass_server" directives were canceled.
*) Feature: the "X-Accel-Buffering" response header line is supported
in proxy mode.
*) Bugfix: the reconfiguration bug and memory leaks in the
ngx_http_perl_module.
*) Feature: the "ssl_verify_client", "ssl_verify_depth", and
"ssl_client_certificate" directives.
*) Change: the $request_method variable now returns the main request
method.
*) Change: the ° symbol codes were changed in koi-win conversion
table.
*) Feature: the euro and N symbols were added to koi-win conversion
table.
*) Bugfix: if nginx distributed the requests among several backends and
some backend failed, then requests intended for this backend was
directed to one live backend only instead of being distributed among
the rest.
*) Feature: the "wait" parameter in the "include" SSI command.
*) Feature: the Ukrainian and Byelorussian characters were added to
koi-win conversion table.
*) Bugfix: in the SSI.
*) Feature: the "bind" option of the "listen" directive in IMAP/POP3
proxy.
*) Bugfix: if the same capture in the "rewrite" directive was used more
then once.
*) Bugfix: the $sent_http_content_type, $sent_http_content_length,
$sent_http_last_modified, $sent_http_connection,
$sent_http_keep_alive, and $sent_http_transfer_encoding variables
were not written to access log.
*) Bugfix: the $sent_http_cache_control returned value of the single
"Cache-Control" response header line.
*) Feature: the -v switch.
*) Bugfix: the segmentation fault may occurred if the SSI page has
remote subrequests.
*) Bugfix: in FastCGI handling.
*) Bugfix: if the perl modules path was not set using
--with-perl_modules_path=PATH or the "perl_modules", then the
segmentation fault was occurred.
*) Feature: the ngx_http_dav_module supports the MKCOL method.
*) Feature: the "create_full_put_path" directive.
*) Feature: the "$limit_rate" variable.
*) Feature: the "uninitialized_variable_warn" directive; the logging
level of the "uninitialized variable" message was lowered from
"alert" to "warn".
*) Feature: the "override_charset" directive.
*) Change: now if the unknown variable is used in the "echo" and "if
expr='$name'" SSI-commands, then the "unknown variable" message is
not logged.
*) Bugfix: the active connection counter increased on the exceeding of
the connection limit specified by the "worker_connections"
directive; the bug had appeared in 0.2.0.
*) Bugfix: the limit rate might not work on some condition; the bug had
appeared in 0.3.38.
*) Feature: the ngx_http_dav_module.
*) Change: the ngx_http_perl_module optimizations.
Thanks to Sergey Skvortsov.
*) Feature: the ngx_http_perl_module supports the $r->request_body_file
method.
*) Feature: the "client_body_in_file_only" directive.
*) Workaround: now on disk overflow nginx tries to write access logs
once a second only.
Thanks to Anton Yuzhaninov and Maxim Dounin.
*) Bugfix: now the "limit_rate" directive more precisely limits rate if
rate is more than 100 Kbyte/s.
Thanks to ForJest.
*) Bugfix: now the IMAP/POP3 proxy escapes the "\r" and "\n" symbols in
login and password to pass authorization server.
Thanks to Maxim Dounin.
*) Feature: the "limit_except" directive.
*) Feature: the "if" directive supports the "!~", "!~*", "-f", and
"!-f" operators.
*) Feature: the ngx_http_perl_module supports the $r->request_body
method.
*) Bugfix: in the ngx_http_addition_filter_module.
*) Feature: the ngx_http_addition_filter_module.
*) Feature: the "proxy_pass" and "fastcgi_pass" directives may be used
inside the "if" block.
*) Feature: the "proxy_ignore_client_abort" and
"fastcgi_ignore_client_abort" directives.
*) Feature: the "$request_completion" variable.
*) Feature: the ngx_http_perl_module supports the $r->request_method
and $r->remote_addr.
*) Feature: the ngx_http_ssi_module supports the "elif" command.
*) Bugfix: the "\/" string in the expression of the "if" command of the
ngx_http_ssi_module was treated incorrectly.
*) Bugfix: in the regular expressions in the "if" command of the
ngx_http_ssi_module.
*) Bugfix: if the relative path was specified in the
"client_body_temp_path", "proxy_temp_path", "fastcgi_temp_path", and
"perl_modules" directives, then the directory was used relatively to
a current path but not to a server prefix.
*) Bugfix: the accept-filter and the TCP_DEFER_ACCEPT option were set
for first "listen" directive only; the bug had appeared in 0.3.31.
*) Bugfix: in the "proxy_pass" directive without the URI part in a
subrequest.
*) Feature: the "http_503" parameter of the "proxy_next_upstream" or
"fastcgi_next_upstream" directives.
*) Bugfix: ngx_http_perl_module did not work with inlined in the
configuration code, if it was not started with the "sub" word.
*) Bugfix: in the "post_action" directive.
*) Change: now nginx passes the malformed proxied backend responses.
*) Feature: the "listen" directives support the address in the "*:port"
form.
*) Feature: the EVFILER_TIMER support in MacOSX 10.4.
*) Workaround: for MacOSX 64-bit kernel kqueue millisecond timeout
bug.
Thanks to Andrei Nigmatulin.
*) Bugfix: if there were several "listen" directives listening one
various addresses inside one server, then server names like
"*.domain.tld" worked for first address only; the bug had appeared
in 0.3.18.
*) Bugfix: if the HTTPS protocol was used in the "proxy_pass" directive
and the request body was in temporarily file then the request was
not transferred.
*) Bugfix: perl 5.8.8 compatibility.
*) Change: the ECONNABORTED error log level was changed to "error" from
"crit".
*) Bugfix: the ngx_http_perl_module could not be build without the
ngx_http_ssi_filter_module.
*) Bugfix: nginx could not be built on i386 platform, if the PIC was
used; the bug had appeared in 0.3.27.
*) Feature: now nginx uses less memory, if PHP in FastCGI mode sends
many warnings before the response.
*) Bugfix: the "Transfer-Encoding: chunked" header line was issued in
the 204 responses for the HTTP/1.1 requests.
*) Bugfix: nginx returned the 502 response, if the complete response
header lines were transferred in a separate FastCGI records.
*) Bugfix: if the proxied URI was specified in the "post_action"
directive, then it ran only after a successful completion of a
request.
*) Feature: the "restrict_host_names" directive was canceled.
*) Feature: the --with-cpu-opt=ppc64 configuration parameter.
*) Bugfix: on some condition the proxied connection with a client was
terminated prematurely.
Thanks to Vladimir Shutoff.
*) Bugfix: the "X-Accel-Limit-Rate" header line was not taken into
account if the request was redirected using the "X-Accel-Redirect"
header line.
*) Bugfix: the "post_action" directive ran only after a successful
completion of a request.
*) Bugfix: the proxied response body generated by the "post_action"
directive was transferred to a client.
*) Change: the "variables_hash_max_size" and
"variables_hash_bucket_size" directives.
*) Feature: the $body_bytes_sent variable can be used not only in the
"log_format" directive.
*) Feature: the $ssl_protocol and $ssl_cipher variables.
*) Feature: the cache line size detection for widespread CPUs at start
time.
*) Feature: now the "accept_mutex" directive is supported using
fcntl(2) on platforms different from i386, amd64, sparc64, and ppc.
*) Feature: the "lock_file" directive and the --with-lock-path=PATH
autoconfiguration directive.
*) Bugfix: if the HTTPS protocol was used in the "proxy_pass" directive
then the requests with the body was not transferred.
*) Change: the "optimize_host_names" directive was renamed to the
"optimize_server_names".
*) Bugfix: if in the "proxy_pass" directive was no the URI part, then
the main request URI was transferred to a backend while proxying the
SSI subrequest.
*) Workaround: for bug in FreeBSD kqueue.
*) Bugfix: now a response generated by the "post_action" directive is
not transferred to a client.
*) Bugfix: the memory leaks were occurring if many log files were used.
*) Bugfix: the first "proxy_redirect" directive was working inside one
location.
*) Bugfix: on 64-bit platforms segmentation fault may occurred on start
if the many names were used in the "server_name" directives; the bug
had appeared in 0.3.18.
*) Feature: the "optimize_host_names" directive.
*) Bugfix: in using of the variables in the "path" and "alias"
directives.
*) Bugfix: the ngx_http_perl_module was incorrectly built on Linux and
Solaris.
*) Feature: the ngx_http_perl_module supports the $r->args and
$r->unescape methods.
*) Feature: the method $r->query_string of ngx_http_perl_module was
canceled.
*) Bugfix: segmentation fault was occurred if the "none" or "blocked"
values was specified in the "valid_referers" directive; the bug had
appeared in 0.3.18.
*) Feature: the "path" and "alias" directives support the variables.
*) Change: now the "valid_referers" directive again checks the URI part.
*) Bugfix: in SSI handling.
*) Feature: the "server_names" directive supports the ".domain.tld"
names.
*) Feature: the "server_names" directive uses the hash for the
"*.domain.tld" names and more effective hash for usual names.
*) Change: the "server_names_hash_max_size" and
"server_names_hash_bucket_size" directives.
*) Change: the "server_names_hash" and "server_names_hash_threshold"
directives were canceled.
*) Feature: the "valid_referers" directive uses the hash site names.
*) Change: now the "valid_referers" directive checks the site names
only without the URI part.
*) Bugfix: some ".domain.tld" names incorrectly processed by the
ngx_http_map_module.
*) Bugfix: segmentation fault was occurred if configuration file did
not exist; the bug had appeared in 0.3.12.
*) Bugfix: on 64-bit platforms segmentation fault may occurred on
start; the bug had appeared in 0.3.16.
*) Change: now on Linux configure checks the presence of epoll and
sendfile64() in kernel.
*) Feature: the "map" directive supports domain names in the
".domain.tld" form.
*) Bugfix: the timeouts were not used in SSL handshake; the bug had
appeared in 0.2.4.
*) Bugfix: in the HTTPS protocol in the "proxy_pass" directive.
*) Bugfix: when the HTTPS protocol was used in the "proxy_pass"
directive the port 80 was used by default.
*) Feature: the ngx_http_map_module.
*) Feature: the "types_hash_max_size" and "types_hash_bucket_size"
directives.
*) Feature: the "ssi_value_length" directive.
*) Feature: the "worker_rlimit_core" directive.
*) Workaround: the connection number in logs was always 1 if nginx was
built by the icc 8.1 or 9.0 compilers with optimization for
Pentium 4.
*) Bugfix: the "config timefmt" SSI command set incorrect time format.
*) Bugfix: nginx did not close connection to IMAP/POP3 backend for the
SSL connections; the bug had appeared in 0.3.13.
Thanks to Rob Mueller.
*) Bugfix: segmentation fault may occurred in at SSL shutdown; the bug
had appeared in 0.3.13.
*) Feature: the new 444 code of the "return" directive to close
connection.
*) Feature: the "so_keepalive" directive in IMAP/POP3 proxy.
*) Bugfix: if there are unclosed connection nginx now calls abort()
only on gracefull quit and active "debug_points" directive.
*) Feature: the IMAP/POP3 proxy supports STARTTLS and STLS.
*) Bugfix: the IMAP/POP3 proxy did not work with the select, poll, and
/dev/poll methods.
*) Bugfix: in SSI handling.
*) Bugfix: now Solaris sendfilev() is not used to transfer the client
request body to FastCGI-server via the unix domain socket.
*) Bugfix: the "auth_basic" directive did not disable the
authorization; the bug had appeared in 0.3.11.
*) Security: if nginx was built with the ngx_http_realip_module and the
"satisfy_any on" directive was used, then access and authorization
directives did not work. The ngx_http_realip_module was not built
and is not built by default.
*) Change: the "$time_gmt" variable name was changed to "$time_local".
*) Change: the "proxy_header_buffer_size" and
"fastcgi_header_buffer_size" directives was renamed to the
"proxy_buffer_size" and "fastcgi_buffer_size" directives.
*) Feature: the ngx_http_memcached_module.
*) Feature: the "proxy_buffering" directive.
*) Bugfix: the changes in accept mutex handling when the "rtsig" method
was used; the bug had appeared in 0.3.0.
*) Bugfix: if the client sent the "Transfer-Encoding: chunked" header
line, then nginx returns the 411 error.
*) Bugfix: if the "auth_basic" directive was inherited from the http
level, then the realm in the "WWW-Authenticate" header line was
without the "Basic realm" text.
*) Bugfix: if the "combined" format was explicitly specified in the
"access_log" directive, then the empty lines was written to the log;
the bug had appeared in 0.3.8.
*) Bugfix: nginx did not run on the sparc platform under any OS except
Solaris.
*) Bugfix: now it is not necessary to place space between the quoted
string and closing bracket in the "if" directive.
*) Change: the "valid_referers" directive and the "$invalid_referer"
variable were moved to the new ngx_http_referer_module from the
ngx_http_rewrite_module.
*) Change: the "$apache_bytes_sent" variable name was changed to
"$body_bytes_sent".
*) Feature: the "$sent_http_..." variables.
*) Feature: the "if" directive supports the "=" and "!=" operations.
*) Feature: the "proxy_pass" directive supports the HTTPS protocol.
*) Feature: the "proxy_set_body" directive.
*) Feature: the "post_action" directive.
*) Feature: the ngx_http_empty_gif_module.
*) Feature: the "worker_cpu_affinity" directive for Linux.
*) Bugfix: the "rewrite" directive did not unescape URI part in
redirect, now it is unescaped except the %00-%25 and %7F-%FF
characters.
*) Bugfix: nginx could not be built by the icc 9.0 compiler.
*) Bugfix: if the SSI was enabled for zero size static file, then the
chunked response was encoded incorrectly.
*) Security: nginx now checks URI got from a backend in
"X-Accel-Redirect" header line or in SSI file for the "/../" paths
and zeroes.
*) Change: nginx now does not treat the empty user name in the
"Authorization" header line as valid one.
*) Feature: the "ssl_session_timeout" directives of the
ngx_http_ssl_module and ngx_imap_ssl_module.
*) Feature: the "auth_http_header" directive of the
ngx_imap_auth_http_module.
*) Feature: the "add_header" directive.
*) Feature: the ngx_http_realip_module.
*) Feature: the new variables to use in the "log_format" directive:
$bytes_sent, $apache_bytes_sent, $status, $time_gmt, $uri,
$request_time, $request_length, $upstream_status,
$upstream_response_time, $gzip_ratio, $uid_got, $uid_set,
$connection, $pipe, and $msec. The parameters in the "%name" form
will be canceled soon.
*) Change: now the false variable values in the "if" directive are the
empty string "" and string starting with "0".
*) Bugfix: while using proxied or FastCGI-server nginx may leave
connections and temporary files with client requests in open state.
*) Bugfix: the worker processes did not flush the buffered logs on
graceful exit.
*) Bugfix: if the request URI was changes by the "rewrite" directive
and the request was proxied in location given by regular expression,
then the incorrect request was transferred to backend; the bug had
appeared in 0.2.6.
*) Bugfix: the "expires" directive did not remove the previous
"Expires" header.
*) Bugfix: nginx may stop to accept requests if the "rtsig" method and
several worker processes were used.
*) Bugfix: the "\"" and "\'" escape symbols were incorrectly handled in
SSI commands.
*) Bugfix: if the response was ended just after the SSI command and
gzipping was used, then the response did not transferred complete or
did not transferred at all.
*) Feature: the "access_log" supports the "buffer=" parameter.
*) Bugfix: nginx could not be built on platforms different from i386,
amd64, sparc, and ppc; the bug had appeared in 0.3.2.
*) Change: now the IMAP/POP3 proxy do not send the empty login to
authorization server.
*) Feature: the "log_format" supports the variables in the $name form.
*) Bugfix: if at least in one server was no the "listen" directive,
then nginx did not listen on the 80 port; the bug had appeared in
0.3.3.
*) Bugfix: if the URI part is omitted in "proxy_pass" directive, the
the 80 port was always used.
*) Bugfix: the segmentation fault may occurred if the IMAP/POP3 login
was changed by authorization server; the bug had appeared in 0.2.2.
*) Bugfix: the accept mutex did not work and all connections were
handled by one process; the bug had appeared in 0.3.3.
*) Bugfix: the timeout did not work if the "rtsig" method and the
"timer_resolution" directive were used.
*) Change: the "bl" and "af" parameters of the "listen" directive was
renamed to the "backlog" and "accept_filter".
*) Feature: the "rcvbuf" and "sndbuf" parameters of the "listen"
directive.
*) Change: the "$msec" log parameter does not require now the
additional the gettimeofday() system call.
*) Feature: the -t switch now tests the "listen" directives.
*) Bugfix: if the invalid address was specified in the "listen"
directive, then after the -HUP signal nginx left an open socket in
the CLOSED state.
*) Bugfix: the mime type may be incorrectly set to default value for
index file with variable in the name; the bug had appeared in 0.3.0.
*) Feature: the "timer_resolution" directive.
*) Feature: the millisecond "$upstream_response_time" log parameter.
*) Bugfix: a temporary file with client request body now is removed
just after the response header was transferred to a client.
*) Bugfix: OpenSSL 0.9.6 compatibility.
*) Bugfix: the SSL certificate and key file paths could not be relative.
*) Bugfix: the "ssl_prefer_server_ciphers" directive did not work in
the ngx_imap_ssl_module.
*) Bugfix: the "ssl_protocols" directive allowed to specify the single
protocol only.
*) Feature: the Sun Studio 10 C compiler support.
*) Feature: the "proxy_upstream_max_fails",
"proxy_upstream_fail_timeout", "fastcgi_upstream_max_fails", and
"fastcgi_upstream_fail_timeout" directives.
*) Bugfix: the segmentation fault occurred when the signal queue
overflowed if the "rtsig" method was used; the bug had appeared in
0.2.0.
*) Change: correct handling of the "\\", "\"", "\'", and "\$" pairs in
SSI.
*) Change: while using load-balancing the time before the failed
backend retry was decreased from 60 to 10 seconds.
*) Change: the "proxy_pass_unparsed_uri" was canceled, the original URI
now passed, if the URI part is omitted in "proxy_pass" directive.
*) Feature: the "error_page" directive supports redirects and allows
more flexible to change an error code.
*) Change: the charset in the "Content-Type" header line now is ignored
in proxied subrequests.
*) Bugfix: if the URI was changed in the "if" block and request did not
found new configuration, then the ngx_http_rewrite_module rules ran
again.
*) Bugfix: if the "set" directive set the ngx_http_geo_module variable
in some configuration part, the this variable was not available in
other configuration parts and the "using uninitialized variable"
error was occurred; the bug had appeared in 0.2.2.
*) Change: the duplicate value of the ngx_http_geo_module variable now
causes the warning and changes old value.
*) Feature: the ngx_http_ssi_module supports the "set" command.
*) Feature: the ngx_http_ssi_module supports the "file" parameter in
the "include" command.
*) Feature: the ngx_http_ssi_module supports the variable value
substitutions in expressions of the "if" command.
*) Feature: the ngx_http_ssi_module supports "$var=text", "$var!=text",
"$var=/text/", and "$var!=/text/" expressions in the "if" command.
*) Bugfix: in proxying location without trailing slash; the bug had
appeared in 0.1.44.
*) Bugfix: the segmentation fault may occurred if the "rtsig" method
was used; the bug had appeared in 0.2.0.
*) Feature: the "config errmsg" command of the ngx_http_ssi_module.
*) Change: the ngx_http_geo_module variables can be overridden by the
"set" directive.
*) Feature: the "ssl_protocols" and "ssl_prefer_server_ciphers"
directives of the ngx_http_ssl_module and ngx_imap_ssl_module.
*) Bugfix: the ngx_http_autoindex_module did not show correctly the
long file names;
*) Bugfix: the ngx_http_autoindex_module now do not show the files
starting by dot.
*) Bugfix: if the SSL handshake failed then another connection may be
closed too.
Thanks to Rob Mueller.
*) Bugfix: the export versions of MSIE 5.x could not connect via HTTPS.
*) The pid-file names used during online upgrade was changed and now is
not required a manual rename operation. The old master process adds
the ".oldbin" suffix to its pid-file and executes a new binary file.
The new master process creates usual pid-file without the ".newbin"
suffix. If the master process exits, then old master process renames
back its pid-file with the ".oldbin" suffix to the pid-file without
suffix.
*) Change: the "worker_connections" directive, new name of the
"connections" directive; now the directive specifies maximum number
of connections, but not maximum socket descriptor number.
*) Feature: SSL supports the session cache inside one worker process.
*) Feature: the "satisfy_any" directive.
*) Change: the ngx_http_access_module and ngx_http_auth_basic_module do
not run for subrequests.
*) Feature: the "worker_rlimit_nofile" and "worker_rlimit_sigpending"
directives.
*) Bugfix: if all backend using in load-balancing failed after one
error, then nginx did not try do connect to them during 60 seconds.
*) Bugfix: in IMAP/POP3 command argument parsing.
Thanks to Rob Mueller.
*) Bugfix: errors while using SSL in IMAP/POP3 proxy.
*) Bugfix: errors while using SSI and gzipping.
*) Bugfix: the "Expires" and "Cache-Control" header lines were omitted
from the 304 responses.
Thanks to Alexandr Kukushkin.
*) Change: the "ssl_engine" directive was canceled in the
ngx_http_ssl_module and now is introduced at global level.
*) Bugfix: the responses with SSI subrequests did not transferred via
SSL connection.
*) Various bug fixes in the IMAP/POP3 proxy.
*) Feature: the IMAP/POP3 proxy supports SSL.
*) Feature: the "proxy_timeout" directive of the ngx_imap_proxy_module.
*) Feature: the "userid_mark" directive.
*) Feature: the $remote_user variable value is determined independently
of authorization use.
*) Feature: the listen(2) backlog in the "listen" directive can be
changed using the -HUP signal.
*) Feature: the geo2nginx.pl script was added to contrib.
*) Change: the FastCGI parameters with the empty values now are passed
to a server.
*) Bugfix: the segmentation fault occurred or the worker process may
got caught in an endless loop if the proxied or FastCGI server sent
the "Cache-Control" header line and the "expires" directive was
used; in the proxied mode the the bug had appeared in 0.1.29.
*) Bugfix: if the request URI had a zero length after the processing in
the ngx_http_proxy_module, then the segmentation fault or bus error
occurred in the ngx_http_proxy_module.
*) Bugfix: the "limit_rate" directive did not work inside the "if"
block; the bug had appeared in 0.1.38.
*) Bugfix: if a client sent too long header line, then the request
information did not logged in the error log.
*) Bugfix: the "Set-Cookie" header line was not transferred when the
"X-Accel-Redirect" was used; the bug had appeared in 0.1.39.
*) Bugfix: the "Content-Disposition" header line was not transferred
when the "X-Accel-Redirect" was used.
*) Bugfix: the master process did not close the listen socket on the
SIGQUIT signal.
*) Bugfix: after on-line upgrade on Linux and Solaris the process name
became shorter in the "ps" command.
*) The changes in the ngx_http_charset_module: the "default_charset"
directive was canceled; the "charset" directive sets the response
charset; the "source_charset" directive sets the source charset only.
*) Bugfix: the backend "WWW-Authenticate" header line did not
transferred while the 401 response code redirecting.
*) Bugfix: the ngx_http_proxy_module and ngx_http_fastcgi_module may
close a connection before anything was transferred to a client; the
bug had appeared in 0.1.38.
*) Workaround: the Linux glibc crypt_r() initialization bug.
*) Bugfix: the ngx_http_ssi_module did not support the relative URI in
the "include virtual" command.
*) Bugfix: if the backend response had the "Location" header line and
nginx should not rewrite this line, then the 500 code response body
was transferred; the bug had appeared in 0.1.29.
*) Bugfix: some directives of the ngx_http_proxy_module and
ngx_http_fastcgi_module were not inherited from the server to the
location level; the bug had appeared in 0.1.29.
*) Bugfix: the ngx_http_ssl_module did not support the certificate
chain.
*) Bugfix: the ngx_http_autoindex_module did not show correctly the
long file names; the bug had appeared in 0.1.38.
*) Bugfixes in IMAP/POP3 proxy in interaction with a backend at the
login state.
*) Feature: the "limit_rate" directive is supported in in proxy and
FastCGI mode.
*) Feature: the "X-Accel-Limit-Rate" response header line is supported
in proxy and FastCGI mode.
*) Feature: the "break" directive.
*) Feature: the "log_not_found" directive.
*) Bugfix: the response status code was not changed when request was
redirected by the ""X-Accel-Redirect" header line.
*) Bugfix: the variables set by the "set" directive could not be used
in SSI.
*) Bugfix: the segmentation fault may occurred if the SSI page has more
than one remote subrequest.
*) Bugfix: nginx treated the backend response as invalid if the status
line in the header was transferred in two packets; the bug had
appeared in 0.1.29.
*) Feature: the "ssi_types" directive.
*) Feature: the "autoindex_exact_size" directive.
*) Bugfix: the ngx_http_autoindex_module did not support the long file
names in UTF-8.
*) Feature: the IMAP/POP3 proxy.
*) Change: now the "\n" is added to the end of the "nginx.pid" file.
*) Bugfix: the responses may be transferred not completely, if many
parts or the big parts were included by SSI.
*) Bugfix: if all backends had returned the 404 reponse and the
"http_404" parameter of the "proxy_next_upstream" or
"fastcgi_next_upstream" directives was used, then nginx started to
request all backends again.
*) Change: if the request header has duplicate the "Host",
"Connection", "Content-Length", or "Authorization" lines, then nginx
now returns the 400 error.
*) Change: the "post_accept_timeout" directive was canceled.
*) Feature: the "default", "af=", "bl=", "deferred", and "bind"
parameters of the "listen" directive.
*) Feature: the FreeBSD accept filters support.
*) Feature: the Linux TCP_DEFER_ACCEPT support.
*) Bugfix: the ngx_http_autoindex_module did not support the file names
in UTF-8.
*) Bugfix: the new log file can be rotated by the -USR1 signal only if
the reconfiguration by the -HUP signal was made twice.
*) Feature: the "working_directory" directive.
*) Feature: the "port_in_redirect" directive.
*) Bugfix: the segmentation fault was occurred if the backend response
header was in several packets; the bug had appeared in 0.1.29.
*) Bugfix: if more than 10 servers were configured or some server did
not use the "listen" directive, then the segmentation fault was
occurred on the start.
*) Bugfix: the segmentation fault might occur if the response was
bigger than the temporary file.
*) Bugfix: nginx returned the 400 response on requests like
"GET http://www.domain.com/uri HTTP/1.0"; the bug had appeared in
0.1.28.
*) Bugfix: the worker process may got caught in an endless loop if the
big response part were include by SSI.
*) Bugfix: the variables set by the "set" directive were not available
in SSI.
*) Feature: the "autoindex_localtime" directive.
*) Bugfix: the empty value of the "proxy_set_header" directive forbids
the client request header line passing.
*) Bugfix: nginx could not be built with the --without-pcre parameter;
the bug had appeared in 0.1.29.
*) Bugfix: 3, 4, 7, and 8 the "proxy_set_header" directives in one
level cause the bus fault on start up.
*) Bugfix: the HTTP protocol was specified in the HTTPS redirects.
*) Bugfix: if the "rewrite" directive used the captures inside the "if"
directive, then the 500 error code was returned.
*) Bugfix: the arguments were omitted in the redirects, issued by the
"rewrite" directive; the bug had appeared in 0.1.29.
*) Feature: the "if" directive supports the captures in regular
expressions.
*) Feature: the "set" directive supports the variables and the captures
of regular expressions.
*) Feature: the "X-Accel-Redirect" response header line is supported in
proxy and FastCGI mode.
*) Bugfix: the response encrypted by SSL may not transferred complete.
*) Bugfix: errors while processing FastCGI response by SSI.
*) Bugfix: errors while using SSI and gzipping.
*) Bugfix: the redirect with the 301 code was transferred without
response body; the bug had appeared in 0.1.30.
*) Bugfix: the worker process may got caught in an endless loop if the
SSI was used.
*) Bugfix: the response encrypted by SSL may not transferred complete.
*) Bugfix: if the length of the response part received at once from
proxied or FastCGI server was equal to 500, then nginx returns the
500 response code; in proxy mode the the bug had appeared in 0.1.29
only.
*) Bugfix: nginx did not consider the directives with 8 or 9 parameters
as invalid.
*) Feature: the "return" directive can return the 204 response code.
*) Feature: the "ignore_invalid_headers" directive.
*) Feature: the ngx_http_ssi_module supports "include virtual" command.
*) Feature: the ngx_http_ssi_module supports the condition command like
'if expr="$NAME"' and "else" and "endif" commands. Only one nested
level is supported.
*) Feature: the ngx_http_ssi_module supports the DATE_LOCAL and
DATE_GMT variables and "config timefmt" command.
*) Feature: the "ssi_ignore_recycled_buffers" directive.
*) Bugfix: the "echo" command did not show the default value for the
empty QUERY_STRING variable.
*) Change: the ngx_http_proxy_module was rewritten.
*) Feature: the "proxy_redirect", "proxy_pass_request_headers",
"proxy_pass_request_body", and "proxy_method" directives.
*) Feature: the "proxy_set_header" directive. The "proxy_x_var" was
canceled and must be replaced with the proxy_set_header directive.
*) Change: the "proxy_preserve_host" is canceled and must be replaced
with the "proxy_set_header Host $host" and the "proxy_redirect off"
directives, the "proxy_set_header Host $host:$proxy_port" directive
and the appropriate proxy_redirect directives.
*) Change: the "proxy_set_x_real_ip" is canceled and must be replaced
with the "proxy_set_header X-Real-IP $remote_addr" directive.
*) Change: the "proxy_add_x_forwarded_for" is canceled and must be
replaced with
the "proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for"
directive.
*) Change: the "proxy_set_x_url" is canceled and must be replaced with
the "proxy_set_header X-URL http://$host:$server_port$request_uri"
directive.
*) Feature: the "fastcgi_param" directive.
*) Change: the "fastcgi_root", "fastcgi_set_var" and "fastcgi_params"
directive are canceled and must be replaced with the fastcgi_param
directives.
*) Feature: the "index" directive can use the variables.
*) Feature: the "index" directive can be used at http and server levels.
*) Change: the last index only in the "index" directive can be absolute.
*) Feature: the "rewrite" directive can use the variables.
*) Feature: the "internal" directive.
*) Feature: the CONTENT_LENGTH, CONTENT_TYPE, REMOTE_PORT, SERVER_ADDR,
SERVER_PORT, SERVER_PROTOCOL, DOCUMENT_ROOT, SERVER_NAME,
REQUEST_METHOD, REQUEST_URI, and REMOTE_USER variables.
*) Change: nginx now passes the invalid lines in a client request
headers or a backend response header.
*) Bugfix: if the backend did not transfer response for a long time and
the "send_timeout" was less than "proxy_read_timeout", then nginx
returned the 408 response.
*) Bugfix: the segmentation fault was occurred if the backend sent an
invalid line in response header; the bug had appeared in 0.1.26.
*) Bugfix: the segmentation fault may occurred in FastCGI fault
tolerance configuration.
*) Bugfix: the "expires" directive did not remove the previous
"Expires" and "Cache-Control" headers.
*) Bugfix: nginx did not take into account trailing dot in "Host"
header line.
*) Bugfix: the ngx_http_auth_module did not work under Linux.
*) Bugfix: the rewrite directive worked incorrectly, if the arguments
were in a request.
*) Bugfix: nginx could not be built on MacOS X.
*) Feature: the "blocked" parameter of the "valid_referers" directive.
*) Change: the errors while handling the request header now logged at
"info" level. The server name and the "Host" and "Referer" header
lines also logged.
*) Change: the "Host" header line is also logged in error log.
*) Feature: the proxy_pass_unparsed_uri directive. The special handling
of the "://" symbols in URI, appeared in 0.1.11 version, now is
canceled.
*) Bugfix: nginx could not be built on FreeBSD and Linux, if the
--without-ngx_http_auth_basic_module configuration parameter was
used.
*) Change: the invalid client header lines are now ignored and logged
at the info level.
*) Change: the server name is also logged in error log.
*) Feature: the ngx_http_auth_basic_module module and the auth_basic
and auth_basic_user_file directives.
*) Bugfix: nginx did run on Linux parisc.
*) Feature: nginx now does not start under FreeBSD if the sysctl
kern.ipc.somaxconn value is too big.
*) Bugfix: if a request was internally redirected by the
ngx_http_index_module module to the ngx_http_proxy_module or
ngx_http_fastcgi_module modules, then the index file was not closed
after request completion.
*) Feature: the "proxy_pass" can be used in location with regular
expression.
*) Feature: the ngx_http_rewrite_filter_module module supports the
condition like "if ($HTTP_USER_AGENT ~ MSIE)".
*) Bugfix: nginx started too slow if the large number of addresses and
text values were used in the "geo" directive.
*) Change: a variable name must be declared as "$name" in the "geo"
directive. The previous variant without "$" is still supported, but
will be removed soon.
*) Feature: the "%{VARIABLE}v" logging parameter.
*) Feature: the "set $name value" directive.
*) Bugfix: gcc 4.0 compatibility.
*) Feature: the --with-openssl-opt=OPTIONS autoconfiguration directive.
*) Feature: the ngx_http_ssi_filter_module supports the QUERY_STRING
and DOCUMENT_URI variables.
*) Bugfix: the ngx_http_autoindex_module may some times return the 404
response for existent directory, if this directory was used in
"alias" directive.
*) Bugfix: the ngx_http_ssi_filter_module ran incorrectly for large
responses.
*) Bugfix: the lack of the "Referer" header line was always accounted
as valid referrer.
*) Feature: the ngx_http_ssi_filter_module and the ssi,
ssi_silent_errors, and ssi_min_file_chunk directives. The 'echo
var="HTTP_..." default=""' and 'echo var="REMOTE_ADDR"' commands are
supported.
*) Feature: the %request_time log parameter.
*) Feature: if the request has no the "Host" header line, then the
"proxy_preserve_host" directive set this header line to the first
server name of the "server_name" directive.
*) Bugfix: nginx could not be built on platforms different from i386,
amd64, sparc, and ppc; the bug had appeared in 0.1.22.
*) Bugfix: the ngx_http_autoindex_module now shows the information not
about the symlink, but about file or directory it points to.
*) Bugfix: the %apache_length parameter logged the negative length of
the response header if the no response was transferred to a client.
*) Bugfix: the ngx_http_stub_status_module showed incorrect handled
connections statistics if the proxying or FastCGI server were used.
*) Bugfix: the installation paths were incorrectly quoted on Linux and
Solaris; the bug had appeared in 0.1.21.
*) Bugfix: the ngx_http_stub_status_module showed incorrect statistics
if "rtsig" method was used or if several worker process ran on SMP.
*) Bugfix: nginx could not be built by the icc compiler on Linux or if
the zlib-1.2.x library was building from sources.
*) Bugfix: nginx could not be built on NetBSD 2.0.
*) Feature: the new "script_filename" and "remote_port" parameters of
the fastcgi_params directive.
*) Bugfix: the FastCGI stderr stream was handled incorrectly.
*) Bugfix: now, if request contains the zero, then the 404 error is
returned for the local requests.
*) Bugfix: nginx could not be built on NetBSD 2.0.
*) Bugfix: the timeout may occur while reading of the the client
request body via SSL connections.
*) Workaround: the default values of the devpoll_events and the
devpoll_changes directives changed from 512 to 32 to be compatible
with Solaris 10.
*) Bugfix: the proxy_set_x_var and fastcgi_set_var directives were not
inherited.
*) Bugfix: in the redirect rewrite directive the arguments were
concatenated with URI by the "&" rather than the "?".
*) Bugfix: the lines without trailing ";" in the file being included by
the ngx_http_geo_module were silently ignored.
*) Feature: the ngx_http_stub_status_module.
*) Bugfix: the unknown log format in the access_log directive caused
the segmentation fault.
*) Feature: the new "document_root" parameter of the fastcgi_params
directive.
*) Feature: the fastcgi_redirect_errors directive.
*) Feature: the new "break" modifier of the "rewrite" directive allows
to stop the rewrite/location cycle and sets the current
configuration to the request.
*) Change: the ngx_http_rewrite_module was rewritten from the scratch.
Now it is possible to redirect, to return the error codes, to check
the variables and referrers. The directives can be used inside
locations. The redirect directive was canceled.
*) Feature: the ngx_http_geo_module.
*) Feature: the proxy_set_x_var and fastcgi_set_var directives.
*) Bugfix: the location configuration with "=" modifier may be used in
another location.
*) Bugfix: the correct content type was set only for requests that use
small caps letters in extension.
*) Bugfix: if the proxy_pass or fastcgi_pass directives were set in the
location, and access was denied, and the error was redirected to a
static page, then the segmentation fault occurred.
*) Bugfix: if in a proxied "Location" header was a relative URL, then a
host name and a slash were added to them; the bug had appeared in
0.1.14.
*) Bugfix: the system error message was not logged on Linux.
*) Bugfix: if the response were transferred by chunks, then on the HEAD
request the final chunk was issued.
*) Bugfix: the "Connection: keep-alive" header were issued, even if the
keepalive_timeout directive forbade the keep-alive use.
*) Bugfix: the errors in the ngx_http_fastcgi_module caused the
segmentation faults.
*) Bugfix: the compressed response encrypted by SSL may not transferred
complete.
*) Bugfix: the TCP-specific TCP_NODELAY, TCP_NOPSUH, and TCP_CORK
options, are not used for the unix domain sockets.
*) Feature: the rewrite directive supports the arguments rewriting.
*) Bugfix: the response code 400 was returned for the POST request with
the "Content-Length: 0" header; the bug had appeared in 0.1.14.
*) Bugfix: the error while the connecting to the FastCGI server caused
segmentation fault.
*) Bugfix: the correct handling of the regular expression, that has
different number of the captures and substitutions.
*) Feature: the location, that is passed to the FastCGI server, can be
regular expression.
*) Bugfix: the FastCGI's parameter REQUEST_URI is now passed with the
arguments and in the original state.
*) Bugfix: the ngx_http_rewrite_module module was required to be built
to use the regular expressions in locations.
*) Bugfix: the directive "proxy_preserve_host on" adds port 80 to the
"Host" headers, if upstream listen on port 80; the bug had appeared
in 0.1.14.
*) Bugfix: the same paths in autoconfiguration parameters
--http-client-body-temp-path=PATH and --http-proxy-temp-path=PATH,
or --http-client-body-temp-path=PATH and
--http-fastcgi-temp-path=PATH caused segmentation fault.
*) Feature: the autoconfiguration directives:
--http-client-body-temp-path=PATH, --http-proxy-temp-path=PATH, and
--http-fastcgi-temp-path=PATH
*) Change: the directory name for the temporary files with the client
request body is specified by directive client_body_temp_path, by
default it is <prefix>/client_body_temp.
*) Feature: the ngx_http_fastcgi_module and the directives:
fastcgi_pass, fastcgi_root, fastcgi_index, fastcgi_params,
fastcgi_connect_timeout, fastcgi_send_timeout, fastcgi_read_timeout,
fastcgi_send_lowat, fastcgi_header_buffer_size, fastcgi_buffers,
fastcgi_busy_buffers_size, fastcgi_temp_path,
fastcgi_max_temp_file_size, fastcgi_temp_file_write_size,
fastcgi_next_upstream, and fastcgi_x_powered_by.
*) Bugfix: the "[alert] zero size buf" error; the bug had appeared in
0.1.3.
*) Change: the URI must be specified after the host name in the
proxy_pass directive.
*) Change: the %3F symbol in the URI was considered as the argument
string start.
*) Feature: the unix domain sockets support in the
ngx_http_proxy_module.
*) Feature: the ssl_engine and ssl_ciphers directives.
Thanks to Sergey Skvortsov for SSL-accelerator.
