The exsltRegisterAll() needs to be called before XSLT stylesheets
are compiled, else stylesheet compilation hooks will not work. This
change fixes EXSLT Functions extension.
Currently this flag is needed for epoll and rtsig, and though these methods
usually present on different platforms than kqueue, nginx can be compiled to
support all of them.
The call to ngx_sock_ntop() in ngx_connection_local_sockaddr() might be
performed with the uninitialized "len" variable. The fix is to initialize
variable to the size of corresponding socket address type.
The issue was introduced in commit 05ba5bce31e0.
On Linux, sockaddr length is required to process unix socket addresses properly
due to unnamed sockets (which don't have sun_path set at all) and abstract
namespace sockets.
Minimal data length we expect for further calls was calculated incorrectly
if parsing stopped right after parsing chunk size. This might in theory
affect clients and/or backends using LF instead of CRLF.
Patch by Dmitry Popov.
On Linux x32 inclusion of sys/sysctl.h produces an error. As sysctl() is
only used by rtsig event method code, which is legacy and not compiled
in by default on modern linuxes, the sys/sysctl.h file now only included
if rtsig support is enabled.
Based on patch by Serguei I. Ivantsov.
When several "error_log" directives are specified in the same configuration
block, logs are written to all files with a matching log level.
All logs are stored in the singly-linked list that is sorted by log level in
the descending order.
Specific debug levels (NGX_LOG_DEBUG_HTTP,EVENT, etc.) are not supported
if several "error_log" directives are specified. In this case all logs
will use debug level that has largest absolute value.
The cycle->new_log->log_level should only be initialized by ngx_init_cycle()
if no error logs were found in the configuration. This move allows to get rid
of extra initialization in ngx_error_log().
Valgrind complains if we pass uninitialized memory to a syscall:
==36492== Syscall param sendmsg(msg.msg_iov[0]) points to uninitialised byte(s)
==36492== at 0x6B5E6A: sendmsg (in /usr/lib/system/libsystem_kernel.dylib)
==36492== by 0x10004288E: ngx_signal_worker_processes (ngx_process_cycle.c:527)
==36492== by 0x1000417A7: ngx_master_process_cycle (ngx_process_cycle.c:203)
==36492== by 0x100001F10: main (nginx.c:410)
==36492== Address 0x7fff5fbff71c is on thread 1's stack
Even initialization of all members of the structure passed isn't enough, as
there is padding which still remains uninitialized and results in Valgrind
complaint. Note there is no real problem here as data from uninitialized
memory isn't used.
Valgrind intercepts SIGUSR2 in some cases, and nginx might not be able to
start due to sigaction() failure. If compiled with NGX_VALGRIND defined,
we now ignore the failure of sigaction().
If "stderr" was specified in one of the "error_log" directives,
stderr is not redirected to the first error_log on startup,
configuration reload, and reopening log files.
On win32 stderr was not redirected into a file specified by "error_log"
while reopening files. Fix is to use platform-independent functions to
work with stderr, as already used by ngx_init_cycle() and main() since
rev. d8316f307b6a.
Use of accept mutex on win32 may result in a deadlock if there are multiple
worker_processes configured and the mutex is grabbed by a process which
can't accept connections.
The parameter is mostly identical to http_404, and is expected to
be used in similar situations. The 403 code might be returned by
a backend instead of 404 on initial sync of new directories with rsync.
See here for feature request and additional details:
http://mailman.nginx.org/pipermail/nginx-ru/2013-April/050920.html
It is now a syntax error if tokens passed to a custom configuration
handler are terminated by "{".
The following incorrect configuration is now properly rejected:
map $v $v2 {
a b {
c d {
e f {
}
An invalid memcached reply that started with '\n' could cause
segmentation fault.
An invalid memcached reply "VALUE / 0 2\r?ok\r\nEND\r\n" was
considered as a valid response.
In addition, if memcached reports that the key was not found,
set u->headers_in.content_length_n to 0. This ensures that
ngx_http_memcached_filter() will not be called while previous
code relied on always intercepting 404. Initialization of
ctx->rest was moved to where it belongs.
Due to peer->checked always set since rev. c90801720a0c (1.3.0)
by round-robin and least_conn balancers (ip_hash not affected),
the code in ngx_http_upstream_free_round_robin_peer() function
incorrectly reset peer->fails too often.
Reported by Dmitry Popov,
http://mailman.nginx.org/pipermail/nginx-devel/2013-May/003720.html
Due to a bad argument list, nginx worker would crash (SIGSEGV) while
trying to log the fact that it received OCSP response with "revoked"
or "unknown" certificate status.
While there, fix similar (but non-crashing) error a few lines above.
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
There are two significant changes in this patch:
1) The <= 0 comparison is done with a signed type. This fixes the case
of ngx_time() being larger than r->lingering_time.
2) Calculation of r->lingering_time - ngx_time() is now always done
in the ngx_msec_t type. This ensures the calculation is correct
even if time_t is unsigned and differs in size from ngx_msec_t.
Thanks to Lanshun Zhou.
Previously, input pattern was kept only for regular expressions
with named captures, which resulted in error log entries without
input pattern for PCRE errors that occured while processing
regular expressions without them.
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
The $proxy_internal_body_length value might change during request lifetime,
notably if proxy_set_body used, and use of a cached value might result in
incorrect upstream requests.
Patch by Lanshun Zhou.
As of now, it allows to better control bandwidth limiting from additional
modules. It is also expected to be used to add variables support to
the limit_rate_after directive.
If nginx was compiled without --with-http_ssl_module, but with some
other module which uses OpenSSL (e.g. --with-mail_ssl_module), insufficient
preprocessor check resulted in build failure. The problem was introduced
by e0a3714a36f8 (1.3.14).
Reported by Roman Arutyunyan.
This is to avoid setting the TCP_NODELAY flag on SPDY socket in
ngx_http_upstream_send_response(). The latter works per request,
but in SPDY case it might affect other streams in connection.
As of 1.3.9, chunked request body may be available with
r->headers_in.content_length_n <= 0. Additionally, request body
may be in multiple buffers even if r->request_body_in_single_buf
was requested.
Dependancy tracking introduced in r5169 were not handled absolute path
names properly. Absolute names might appear in CORE_DEPS if --with-openssl
or --with-pcre configure arguments are used to build OpenSSL/PCRE
libraries.
Additionally, revert part of r5169 to set NGX_INCS from Makefile
variables. Makefile variables have $ngx_include_opt in them, which
might result in wrong include paths being used. As a side effect,
this also restores build with --with-http_perl_module and --without-http
at the same time.
Before 1.3.9 an attempt to read body in a subrequest only caused problems
if body wasn't already read or discarded in a main request. Starting with
1.3.9 it might also cause problems if body was discarded by a main request
before subrequest start.
Fix is to just ignore attempts to read request body in a subrequest, which
looks like right thing to do anyway.
We generate both read and write events if an error event was returned by
port_getn() without POLLIN/POLLOUT, but we should not try to handle inactive
events, they may even have no handler.
Stale write event may happen if read and write events was reported both,
and processing of the read event closed descriptor.
In practice this might result in "sendfilev() failed (134: ..." or
"writev() failed (134: ..." errors when switching to next upstream server.
See report here:
http://mailman.nginx.org/pipermail/nginx/2013-April/038421.html
To avoid further breaks it's now done properly, all the dependencies
are now passed to Makefile.PL. While here, fixed include list passed to
Makefile.PL to use Makefile variables rather than a list expanded during
configure.
Problems with setsockopt(TCP_NODELAY) and setsockopt(TCP_NOPUSH), as well
as sendfile() syscall on Solaris, are specific to UNIX-domain sockets.
Other address families, i.e. AF_INET and AF_INET6, are fine.
On Win32 platforms 0 is used to indicate errors in file operations, so
comparing against -1 is not portable.
This was not much of an issue in patched code, since only ngx_fd_info() test
is actually reachable on Win32 and in worst case it might result in bogus
error log entry.
Patch by Piotr Sikora.
Sorting of upstream servers by their weights is not required by
current balancing algorithms.
This will likely change mapping to backends served by ip_hash
weighted upstreams.
And corresponding variable $connections_waiting was added.
Previously, waiting connections were counted as the difference between
active connections and the sum of reading and writing connections.
That made it impossible to count more than one request in one connection
as reading or writing (as is the case for SPDY).
Also, we no longer count connections in handshake state as waiting.
This should improve behavior under deficiency of connections.
Since SSL handshake usually takes significant amount of time,
we exclude connections from reusable queue during this period
to avoid premature flush of them.
If proxy_pass to a host with dynamic resolution was used to handle
a subrequest, and host resolution failed, the main request wasn't run
till something else happened on the connection. E.g. request to "/zzz"
with the following configuration hanged:
addition_types *;
resolver 8.8.8.8;
location /test {
set $ihost xxx;
proxy_pass http://$ihost;
}
location /zzz {
add_after_body /test;
return 200 "test";
}
Report and original version of the patch by Lanshun Zhou,
http://mailman.nginx.org/pipermail/nginx-devel/2013-March/003476.html.
Code to reuse of r->request_body->buf in upstream module assumes it's
dedicated buffer, hence after 1.3.9 (r4931) it might reuse r->header_in
if client_body_in_file_only was set, resulting in original request
corruption. It is considered to be safer to always create a dedicated
buffer for rb->bufs to avoid such problems.
After introduction of chunked request body handling in 1.3.9 (r4931),
r->request_body->bufs buffers have b->start pointing to original buffer
start (and b->pos pointing to real data of this particular buffer).
While this is ok as per se, it caused bad things (usually original request
headers included before the request body) after reinit of the request
chain in ngx_http_upstream_reinit() while sending the request to a next
upstream server (which used to do b->pos = b->start for each buffer
in the request chain).
Patch by Piotr Sikora.
If c->recv() returns 0 there is no sense in using ngx_socket_errno for
logging, its value meaningless. (The code in question was copied from
ngx_http_keepalive_handler(), but ngx_socket_errno makes sense there as it's
used as a part of ECONNRESET handling, and the c->recv() call is preceeded
by the ngx_set_socket_errno(0) call.)
In r2411 setting of NGX_HTTP_GZIP_BUFFERED in c->buffered was moved from
ngx_http_gzip_filter_deflate_start() to ngx_http_gzip_filter_buffer() since
it was always called first. But in r2543 the "postpone_gzipping" directive
was introduced, and if postponed gzipping is disabled (the default setting),
ngx_http_gzip_filter_buffer() is not called at all.
We must always set NGX_HTTP_GZIP_BUFFERED after the start of compression
since there is always a trailer that is buffered.
There are no known cases when it leads to any problem with current code.
But we already had troubles in upcoming SPDY implementation.
Not only this is useful for the upcoming SPDY support, but it can
also help to improve HTTPS performance by enabling TLS False Start
in Chrome/Chromium browsers [1]. So, we always enable NPN for HTTPS
if it is supported by OpenSSL.
[1] http://www.imperialviolet.org/2012/04/11/falsestart.html
The c->single_connection was intended to be used as lock mechanism
to serialize modifications of request object from several threads
working with client and upstream connections. The flag is redundant
since threads in nginx have never been used that way.
In Linux 2.6.32, TCP_DEFER_ACCEPT was changed to accept connections
after the deferring period is finished without any data available.
(Reading from the socket returns EAGAIN in this case.)
Since in nginx TCP_DEFER_ACCEPT is set to "post_accept_timeout", we
do not need to wait longer if deferred accept returns with no data.
Previously, only the first request in a connection used timeout
value from the "client_header_timeout" directive while reading
header. All subsequent requests used "keepalive_timeout" for
that.
It happened because timeout of the read event was set to the
value of "keepalive_timeout" in ngx_http_set_keepalive(), but
was not removed when the next request arrived.
Previously, we always created an object and logged 400 (Bad Request)
in access log if a client closed connection without sending any data.
Such a connection was counted as "reading".
Since it's common for modern browsers to behave like this, it's no
longer considered an error if a client closes connection without
sending any data, and such a connection will be counted as "waiting".
Now, we do not log 400 (Bad Request) and keep memory footprint as
small as possible.
Previously, it was allocated from a connection pool and
was selectively freed for an idle keepalive connection.
The goal is to put coupled things in one chunk of memory,
and to simplify handling of request objects.
According to RFC 6066, client is not supposed to request a different server
name at the application layer. Server implementations that rely upon these
names being equal must validate that a client did not send a different name
in HTTP request. Current versions of Apache HTTP server always return 400
"Bad Request" in such cases.
There exist implementations however (e.g., SPDY) that rely on being able to
request different host names in one connection. Given this, we only reject
requests with differing host names if verification of client certificates
is enabled in a corresponding server configuration.
An example of configuration that might not work as expected:
server {
listen 433 ssl default;
return 404;
}
server {
listen 433 ssl;
server_name example.org;
ssl_client_certificate org.cert;
ssl_verify_client on;
}
server {
listen 433 ssl;
server_name example.com;
ssl_client_certificate com.cert;
ssl_verify_client on;
}
Previously, a client was able to request example.com by presenting
a certificate for example.org, and vice versa.
Not only this is consistent with a case without SNI, but this also
prevents abusing configurations that assume that the $host variable
is limited to one of the configured names for a server.
An example of potentially unsafe configuration:
server {
listen 443 ssl default_server;
...
}
server {
listen 443;
server_name example.com;
location / {
proxy_pass http://$host;
}
}
Note: it is possible to negotiate "example.com" by SNI, and to request
arbitrary host name that does not exist in the configuration above.
Previously, this was done only after the whole request header
was parsed, and if an error occurred earlier then the request
was processed in the default server (or server chosen by SNI),
while r->headers_in.server might be set to the value from the
Host: header or host from request line.
r->headers_in.server is in turn used for $host variable and
in HTTP redirects if "server_name_in_redirect" is disabled.
Without the change, configurations that rely on this during
error handling are potentially unsafe if SNI is used.
This change also allows to use server specific settings of
"underscores_in_headers", "ignore_invalid_headers", and
"large_client_header_buffers" directives for HTTP requests
and HTTPS requests without SNI.
The request object will not be created until SSL handshake is complete.
This simplifies adding another connection handler that does not need
request object right after handshake (e.g., SPDY).
There are also a few more intentional effects:
- the "client_header_buffer_size" directive will be taken from the
server configuration that was negotiated by SNI;
- SSL handshake errors and timeouts are not logged into access log
as bad requests;
- ngx_ssl_create_connection() is not called until the first byte of
ClientHello message was received. This also decreases memory
consumption if plain HTTP request is sent to SSL socket.
Previously, only the first request in a connection was assigned the
configuration selected by SNI. All subsequent requests initially
used the default server's configuration, ignoring SNI, which was
wrong.
Now all subsequent requests in a connection will initially use the
configuration selected by SNI. This is done by storing a pointer
to configuration in http connection object. It points to default
server's configuration initially, but changed upon receipt of SNI.
(The request's configuration can be further refined when parsing
the request line and Host: header.)
This change was not made specific to SNI as it also allows slightly
faster access to configuration without the request object.
This change helps to decouple ngx_http_ssl_servername() from the request
object.
Note: now we close connection in case of error during server name lookup
for request. Previously, we did so only for HTTP/0.9 requests.
In case multiple "Cache-Control" headers are sent to a client,
multiple values in $sent_http_cache_control were incorrectly
split by a semicolon. Now they are split by a comma.
In case of error in the read event handling we close a connection
by calling ngx_http_close_connection(), that also destroys connection
pool. Thereafter, an attempt to free a buffer (added in r4892) that
was allocated from the pool could cause SIGSEGV and is meaningless
as well (the buffer already freed with the pool).
In case of fully populated SSL session cache with no memory left for
new allocations, ngx_ssl_new_session() will try to expire the oldest
non-expired session and retry, but only in case when slab allocation
fails for "cached_sess", not when slab allocation fails for either
"sess_id" or "id", which can happen for number of reasons and results
in new session not being cached.
Patch fixes this by adding retry logic to "sess_id" & "id" allocations.
Patch by Piotr Sikora.
It was added in r2717 and no longer needed since r2721,
where the termination was added to ngx_shm_alloc() and
ngx_init_zone_pool(). So then it only corrupts error
messages about ivalid zones.
This allows to proxy WebSockets by using configuration like this:
location /chat/ {
proxy_pass http://backend;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
}
Connection upgrade is allowed as long as it was requested by a client
via the Upgrade request header.
Note: use of {SHA} passwords is discouraged as {SHA} password scheme is
vulnerable to attacks using rainbow tables. Use of {SSHA}, $apr1$ or
crypt() algorithms as supported by OS is recommended instead.
The {SHA} password scheme support is added to avoid the need of changing
the scheme recorded in password files from {SHA} to {SSHA} because such
a change hides security problem with {SHA} passwords.
Patch by Louis Opter, with minor changes.
If fastcgi end request record was split between several network packets,
with fastcgi_keep_conn it was possible that connection was saved in incorrect
state (e.g. with padding bytes not yet read).
Checks for f->padding before state transitions make code hard to follow,
remove them and make sure we always do another loop iteration after
f->state is set to ngx_http_fastcgi_st_padding.
With fastcgi_keep_conn it was possible that connection was closed after
FCGI_STDERR record with zero padding and without any further data read yet.
This happended as f->state was set to ngx_http_fastcgi_st_padding and then
"break" happened, resulting in p->length being set to f->padding, i.e. 0
(which in turn resulted in connection close).
Fix is to make sure we continue the loop after f->state is set.
After introduction of chunked request body reading support in 1.3.9 (r4931),
the rb->bufs wasn't set if request body was fully preread while calling the
ngx_http_read_client_request_body() function.
Reported by Yichun Zhang (agentzh).
