The "include" directive should be able to include multiple files if
given a filename mask. Fixed this to work for "include" directives
inside the "map" or "types" blocks. The "include" directive inside
the "geo" block is still not fixed.
Previous code incorrectly used ctx->var_values as an array of pointers to
ngx_http_variable_value_t, but the array contains structures, not pointers.
Additionally, ctx->var_values inspection failed to properly set var on
match.
This includes handling of ETag headers (if present in a response) with
basic support for If-Match, If-None-Match conditionals in not modified
filter.
Note that the "r->headers_out.last_modified_time == -1" check in the not
modified filter is left as is intentionally. It's to prevent handling
of If-* headers in case of proxy without cache (much like currently
done with If-Modified-Since).
This makes code more extendable. The only functional change is when
If-Modified-Since and If-Unmodified-Since are specified together, the
case which is explicitly left undefined by RFC 2616. The new behaviour
is to respect them both, which seems better.
If modification time isn't known, skip range processing and return full
entity body instead of just ignoring If-Range. Ignoring If-Range isn't
safe as client will assume entity wasn't changed since time specified.
The original idea was to optimize edge cases in case of interchangeable
backends, i.e. don't establish a new connection if we have any one
cached. This causes more harm than good though, as it screws up
underlying balancer's idea about backends used and may result in
various unexpected problems.
Number of entries in stsc atom was wrong if we've added an entry to
split a chunk.
Additionally, there is no need to add an entry if we are going to split
last chunk in an entry, it's enough to update the entry we already have.
Previously new entry was added and old one was left as is, resulting in
incorrect entry with zero chunks which might confuse some software.
Contains response status code as a 3-digit integer
(with leading zeroes if necessary), or one of the following values:
000 - response status code has not yet been assigned
009 - HTTP/0.9 request is being processed
Removed duplicate call of ngx_http_upstream_init_round_robin_peer()
overlooked during code changes. Rewritten "return lcp->free_rr_peer(...)"
as MSVC doesn't like it.
The module now supports recursive search of client address through the
chain of trusted proxies (closes#100), in the same scope as the geo
module. Proxies are listed by the "geoip_proxy" directive, recursive
search is enabled by the "geoip_proxy_recursive" directive. IPv6 is
partially supported: proxies may be specified with IPv6 addresses.
Example:
geoip_country .../GeoIP.dat;
geoip_proxy 127.0.0.1;
geoip_proxy ::1;
geoip_proxy 10.0.0.0/8;
geoip_proxy_recursive on;
The module now supports recursive search of client address through
the chain of trusted proxies, controlled by the "proxy_recursive"
directive in the "geo" block. It also gets partial IPv6 support:
now proxies may be specified with IPv6 addresses.
Example:
geo $test {
...
proxy 127.0.0.1;
proxy ::1;
proxy_recursive;
}
There's also a slight change in behavior. When original client
address (as specified by the "geo" directive) is one of the
trusted proxies, and the value of the X-Forwarded-For request
header cannot not be parsed as a valid address, an original client
address will be used for lookup. Previously, 255.255.255.255 was
used in this case.
The module now supports recursive search of client address through
the chain of trusted proxies, controlled by the "real_ip_recursive"
directive (closes#2). It also gets full IPv6 support (closes#44)
and canonical value of the $client_addr variable on address change.
Example:
real_ip_header X-Forwarded-For;
set_real_ip_from 127.0.0.0/8;
set_real_ip_from ::1;
set_real_ip_from unix:;
real_ip_recursive on;
Padding was incorrectly ignored on end request, empty stdout and stderr
fastcgi records. This resulted in protocol desynchronization if fastcgi
application used these records with padding for some reason.
Reported by Ilia Vinokurov.
Failing to do so results in problems if 400 or 414 requests are
redirected to fastcgi/scgi/uwsgi upstream, as well as after invalid
headers got from upstream. This was already fixed for proxy in r3478,
but fastcgi (the only affected protocol at that time) was missed.
Reported by Matthieu Tourne.
The proxy module context may be NULL in case of filter finalization
(e.g. by image_filter) followed by an internal redirect. This needs
some better handling, but for now just check if ctx is still here.
Previous (incorrect) behaviour was to inherit ipv6 rules separately from
ipv4 ones. Now all rules are either inherited (if there are no rules
defined at current level) or not (if there are any rules defined).
Note that "ctxt->loadsubset = 1" previously used isn't really correct as
ctxt->loadsubset is a bitfield now. The use of xmlCtxtUseOptions() with
XML_PARSE_DTDLOAD is believed to be a better way to do the same thing.
Patch by Laurence Rowe.
The problem was introduced in 0.7.44 (r2589) during conversion to complex
values. Previously string.len included space for terminating NUL, but
with complex values it doesn't.
- Removed "hash" element from ngx_http_header_val_t which was always 1.
- Replaced NGX_HTTP_EXPIRES_* with ngx_http_expires_t enum type.
- Added prototype for ngx_http_add_header()
- Simplified ngx_http_set_last_modified().
This resulted in a disclosure of previously freed memory if upstream
server returned specially crafted response, potentially exposing
sensitive information.
Reported by Matthew Daley.
Embedded perl module assumes there is a space for terminating NUL character,
make sure to provide it in all situations by allocating one extra byte for
value buffer. Default ssi_value_length is reduced accordingly to
preserve 256 byte allocations.
While here, fixed another one byte value buffer overrun possible in
ssi_quoted_symbol_state.
Reported by Matthew Daley.
Previous code incorrectly assumed that nodes with identical keys are linked
together. This might not be true after tree rebalance.
Patch by Lanshun Zhou.
Nuke NGX_PARSE_LARGE_TIME, it's not used since 0.6.30. The only error
ngx_parse_time() can currently return is NGX_ERROR, check it explicitly
and make sure to cast it to appropriate type (either time_t or ngx_msec_t)
to avoid signedness warnings on platforms with unsigned time_t (notably QNX).
Empty flush buffers are legitimate and may happen e.g. due to $r->flush()
calls in embedded perl. If there are no data buffered in zlib, deflate()
will return Z_BUF_ERROR (i.e. no progress possible) without adding anything
to output. Don't treat Z_BUF_ERROR as fatal and correctly send empty flush
buffer if we have no data in output at all.
See this thread for details:
http://mailman.nginx.org/pipermail/nginx/2010-November/023693.html
the way.
It was unintentionally changed in r4272, so that it could only limit the first
location where the processing of the request has reached PREACCESS phase.
Example configuration to reproduce:
server {
proxy_redirect off;
location / {
proxy_pass http://localhost:8000;
proxy_redirect http://localhost:8000/ /;
location ~ \.php$ {
proxy_pass http://localhost:8000;
# proxy_redirect must be inherited from the level above,
# but instead it was switched off here
}
}
}
Doing a cleanup before every lookup seems to be too aggressive. It can lead to
premature removal of the nodes still usable, which increases the amount of work
under a mutex lock and therefore decreases performance.
In order to improve cleanup behavior, cleanup function call has been moved right
before the allocation of a new node.
"limit_req_zone" directive; minimum size of zone is increased.
Previously an unsigned variable was used to keep the return value of
ngx_parse_size() function, which led to an incorrect zone size if NGX_ERROR
was returned.
The new code has been taken from the "limit_conn_zone" directive.
Support for TLSv1.1 and TLSv1.2 protocols was introduced in OpenSSL 1.0.1
(-beta1 was recently released). This change makes it possible to disable
these protocols and/or enable them without other protocols.
The problem was localized in ngx_http_proxy_rewrite_redirect_regex() handler
function which did not take into account prefix when overwriting header value.
New directives: proxy_cache_lock on/off, proxy_cache_lock_timeout. With
proxy_cache_lock set to on, only one request will be allowed to go to
upstream for a particular cache item. Others will wait for a response
to appear in cache (or cache lock released) up to proxy_cache_lock_timeout.
Waiting requests will recheck if they have cached response ready (or are
allowed to run) every 500ms.
Note: we intentionally don't intercept NGX_DECLINED possibly returned by
ngx_http_file_cache_read(). This needs more work (possibly safe, but needs
further investigation). Anyway, it's exceptional situation.
Note: probably there should be a way to disable caching of responses
if there is already one request fetching resource to cache (without waiting
at all). Two possible ways include another cache lock option ("no_cache")
or using proxy_no_cache with some supplied variable.
Note: probably there should be a way to lock updating requests as well. For
now "proxy_cache_use_stale updating" is available.
If proxy_pass was used with variables and there was no URI component,
nginx always used unparsed URI. This isn't consistent with "no variables"
case, where e.g. rewrites are applied even if there is no URI component.
Fix is to use the same logic in both cases, i.e. only use unparsed URI if
it's valid and request is the main one.
The SCGI specification doesn't specify format of the response, and assuming
CGI specs should be used there is no reason to complain. RFC 3875
explicitly states that "A Status header field is optional, and status
200 'OK' is assumed if it is omitted".
The r->http_version is a version of client's request, and modules must
not set it unless they are really willing to downgrade protocol version
used for a response (i.e. to HTTP/0.9 if no response headers are available).
In neither case r->http_version may be upgraded.
The former code downgraded response from HTTP/1.1 to HTTP/1.0 for no reason,
causing various problems (see ticket #66). It was also possible that
HTTP/0.9 requests were upgraded to HTTP/1.0.
It was working for nginx's own 206 replies as they are seen as 200 in the
headers filter module (range filter goes later in the headers filter chain),
but not for proxied replies.
Used "\x5" in 5th byte to claim presence of both audio and video. Used
previous tag size 0 in the beginning of the flv body (bytes 10 .. 13) as
required by specification (see http://www.adobe.com/devnet/f4v.html).
Patch by Piotr Sikora.
The following problems were fixed:
1. Directive fastcgi_cache affected headers sent to backends in unrelated
servers / locations (see ticket #45).
2. If-Unmodified-Since, If-Match and If-Range headers were sent to backends
if fastcgi_cache was used.
3. Cache-related headers were sent to backends if there were no fastcgi_param
directives and fastcgi_cache was used at server level.
Headers cleared with cache enabled (If-Modified-Since etc.) might be cleared
in unrelated servers/locations without proxy_cache enabled if proxy_cache was
used in some server/location.
Example config which triggered the problem:
proxy_set_header X-Test "test";
server { location /1 { proxy_cache name; proxy_pass ... } }
server { location /2 { proxy_pass ... } }
Another one:
server {
proxy_cache name;
location /1 { proxy_pass ... }
location /2 { proxy_cache off; proxy_pass ... }
}
In both cases If-Modified-Since header wasn't sent to backend in location /2.
Fix is to not modify conf->headers_source, but instead merge user-supplied
headers from conf->headers_source and default headers (either cache or not)
into separate headers_merged array.
The following config caused segmentation fault due to conf->file not
being properly set if "ssl on" was inherited from the http level:
http {
ssl on;
server {
}
}
Previously nginx used to mark backend again as live as soon as fail_timeout
passes (10s by default) since last failure. On the other hand, detecting
dead backend takes up to 60s (proxy_connect_timeout) in typical situation
"backend is down and doesn't respond to any packets". This resulted in
suboptimal behaviour in the above situation (up to 23% of requests were
directed to dead backend with default settings).
More detailed description of the problem may be found here (in Russian):
http://mailman.nginx.org/pipermail/nginx-ru/2011-August/042172.html
Fix is to only allow one request after fail_timeout passes, and
mark backend as "live" only if this request succeeds.
Note that with new code backend will not be marked "live" unless "check"
request is completed, and this may take a while in some specific workloads
(e.g. streaming). This is believed to be acceptable.
For files with '?' in their names autoindex generated links with '?' not
escaped. This resulted in effectively truncated links as '?' indicates
query string start.
This is an updated version of the patch originally posted at [1]. It
introduces generic NGX_ESCAPE_URI_COMPONENT which escapes everything but
unreserved characters as per RFC 3986. This approach also renders unneeded
special colon processing (as colon is percent-encoded now), it's dropped
accordingly.
[1] http://nginx.org/pipermail/nginx-devel/2010-February/000112.html
Reported by Konstantin Leonov.
Big POST (not fully preread) to a
location / {
return 202;
}
resulted in incorrect behaviour due to "return" code path not calling
ngx_http_discard_request_body(). The same applies to all "return" used
with 2xx/3xx codes except 201 and 204, and to all "return ... text" uses.
Fix is to add ngx_http_discard_request_body() call to ngx_http_send_response()
function where it looks appropriate. Discard body call from emtpy gif module
removed as it's now redundant.
Reported by Pyry Hakulinen, see
http://mailman.nginx.org/pipermail/nginx/2011-August/028503.html
Test case:
location / {
error_page 405 /nope;
return 405;
}
location /nope {
return 200;
}
This is expected to return 405 with empty body, but in 0.8.42+ will return
builtin 405 error page as well (though not counted in Content-Length, thus
breaking protocol).
Fix is to use status provided by rewrite script execution in case
it's less than NGX_HTTP_BAD_REQUEST even if r->error_status set. This
check is in line with one in ngx_http_script_return_code().
Note that this patch also changes behaviour for "return 302 ..." and
"rewrite ... redirect" used as error handler. E.g.
location / {
error_page 405 /redirect;
return 405;
}
location /redirect {
rewrite ^ http://example.com/;
}
will actually return redirect to "http://example.com/" instead of builtin 405
error page with meaningless Location header. This looks like correct change
and it's in line with what happens on e.g. directory redirects in error
handlers.
By default follow the old behaviour, i.e. FASTCGI_KEEP_CONN flag isn't set
in request and application is responsible for closing connection once request
is done. To keep connections alive fastcgi_keep_conn must be activated.
Previous use of size_t may cause wierd effects on 32bit platforms with certain
big responses transferred in unbuffered mode.
Nuke "if (size > u->length)" check as it's not usefull anyway (preread
body data isn't subject to this check) and now requires additional check
for u->length being positive.
We no longer use r->headers_out.content_length_n as a primary source of
backend's response length. Instead we parse response length to
u->headers_in.content_length_n and copy to r->headers_out.content_length_n
when needed.
The ngx_chain_update_chains() needs pool to free chain links used for buffers
with non-matching tags. Providing one helps to reduce memory consumption
for long-lived requests.
There were 2 buffers allocated on each buffer chain sent through chunked
filter (one buffer for chunk size, another one for trailing CRLF, about
120 bytes in total on 32-bit platforms). This resulted in large memory
consumption with long-lived requests sending many buffer chains. Usual
example of problematic scenario is streaming though proxy with
proxy_buffering set to off.
Introduced buffers reuse reduces memory consumption in the above problematic
scenario.
See here for initial report:
http://mailman.nginx.org/pipermail/nginx/2010-April/019814.html
"max_ranges 0" disables ranges support at all,
"max_ranges 1" allows the single range, etc.
By default number of ranges is unlimited, to be precise, 2^31-1.
then nginx disables ranges and returns just the source response.
This fix should not affect well-behaving applications but will defeat
DoS attempts exploiting malicious byte ranges.
Flush flag wasn't set in constructed buffer and this prevented any data
from being actually sent to upstream due to SSL buffering. Make sure
we always set flush in the last buffer we are going to sent.
See here for report:
http://nginx.org/pipermail/nginx-ru/2011-June/041552.html
enabled in any server. The previous r1033 does not help when unused zone
becomes used after reconfiguration, so it is backed out.
The initial thought was to make SSL modules independed from SSL implementation
and to keep OpenSSL code dependance as much as in separate files.
and is shared among all hosts instead of pregenerating for every HTTPS host
on configuraiton phase. This decreases start time for configuration with
large number of HTTPS hosts.
*) use a real excess value instead of non-updated limit_req rbtree node field,
*) move inactivity queue handling inside ngx_http_limit_req_lookup()
since the node is not required outside the lookup function;
the bug has been introduced in r3184
Besides, now $uid_set is not cacheable and may have two values:
before and after header filter processing.
This allows to log case, when uid cookie is remarked.
fastcgi_upstream_max_fails, fastcgi_upstream_fail_timeout,
memcached_upstream_max_fails, and memcached_upstream_fail_timeout
directives obsolete since 0.5.0 version
