mirror/nginx
1
0
Fork 0
mirror of https://github.com/nginx/nginx.git synced 2024-12-05 06:19:01 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity
ad2289e70e
nginx/README
Sergey Kandaurov cf5168c9e0 Mention quic branch in README.
2020-04-30 15:59:14 +03:00

224 lines
7.7 KiB
Plaintext
Raw Blame History

Experimental QUIC support for nginx
-----------------------------------
1. Introduction
2. Installing
3. Configuration
4. Clients
5. Troubleshooting
6. Links
1. Introduction
This is an experimental QUIC [1] / HTTP/3 [2] support for nginx.
The code is developed in a separate "quic" branch available
at https://hg.nginx.org/nginx-quic. Currently it is based
on nginx mainline 1.17.10. We are planning to merge new nginx
releases into this branch regularly.
The project code base is under the same BSD license as nginx.
The code is at an early alpha level of quality and should not
be used in production.
We are working on improving HTTP/3 support with the goal of
integrating it to the main NGINX codebase. Expect frequent
updates of this code and don't rely on it for whatever purpose.
We'll be grateful for any feedback and code submissions however
we don't bear any responsibilities for any issues with this code.
You can always contact us via nginx-devel mailing list [3].
What works now:
Currently we support IETF-QUIC draft 27
Earlier drafts are NOT supported as they have incompatible wire format;
nginx should be able to respond to simple HTTP/3 requests over QUIC and
it should be possible to upload and download big files without errors.
+ The handshake completes successfully
+ One endpoint can update keys and its peer responds correctly
+ 00-RTT data is being received and acted on
+ Connection is established using TLS Resume Ticket
+ Stream data is being exchanged and ACK'ed
+ An H3 transaction succeeded
+ One or both endpoints insert entries into dynamic table and
subsequently reference them from header blocks
Not (yet) supported features:
- Version negotiation
- Stateless Retry
- ECN, Congestion control and friends as specified in quic-recovery [5]
- A connection with the spin bit succeeds and the bit is spinning
- Structured Logging
- QUIC recovery (proper congestion and flow control)
- NAT Rebinding
- Address Mobility
- Server push
- HTTP/3 trailers
Since the code is experimental and still under development,
a lot of things may not work as expected, for example:
- Protocol error messages are not implemented, in case of error connection
closes silently for peer
- ACK handling is basic: every received ack-eliciting packet
is acknowledged, no ack ranges are used
- Flow control mechanism is basic and intended to avoid CPU hog and make
simple interactions possible
- Not all draft requirements are strictly followed; some of checks are
omitted for the sake of simplicity of initial implementation
2. Installing
You will need a BoringSSL [4] library that provides QUIC support
$ hg clone -b quic https://hg.nginx.org/nginx-quic
$ cd nginx-quic
$ ./auto/configure --with-debug --with-http_v3_module \
--with-cc-opt="-I../boringssl/include" \
--with-ld-opt="-L../boringssl/build/ssl \
-L../boringssl/build/crypto"
$ make
3. Configuration
The "listen" directive got a new option: "http3"
which enables HTTP/3 over QUIC on the specified port.
Along with "http3", you also have to specify "reuseport" option [6]
to make it work properly with multiple workers.
A number of directives were added that specify transport parameter values:
quic_max_idle_timeout
quic_max_ack_delay
quic_max_packet_size
quic_initial_max_data
quic_initial_max_stream_data_bidi_local
quic_initial_max_stream_data_bidi_remote
quic_initial_max_stream_data_uni
quic_initial_max_streams_bidi
quic_initial_max_streams_uni
quic_ack_delay_exponent
quic_active_migration
quic_active_connection_id_limit
Two additional variables are available: $quic and $http3.
The value of $quic is "quic" if QUIC connection is used,
and empty string otherwise. The value of $http3 is a string
"h3-xx" where "xx" is the supported draft number.
Example configuration:
http {
log_format quic '$remote_addr - $remote_user [$time_local] '
'"$request" $status $body_bytes_sent '
'"$http_referer" "$http_user_agent" "$quic" "$http3"';
access_log logs/access.log quic;
server {
# for better compatibility it's recommended
# to use the same port for quic and https
listen 8443 http3 reuseport;
listen 8443 ssl;
ssl_certificate certs/example.com.crt;
ssl_certificate_key certs/example.com.key;
ssl_protocols TLSv1.3;
location / {
# required for browsers to direct them into quic port
add_header Alt-Svc $http3=":8443";
}
}
}
4. Clients
* Browsers
Known to work: Firefox 75+ and Chrome 83+
Beware of strange issues: sometimes browser may decide to ignore QUIC
Cache clearing/restart might help. Always check access.log and
error.log to make sure you are using HTTP/3 and not TCP https.
+ to enable QUIC in Firefox, set the following in 'about:config':
network.http.http3.enabled = true
+ to enable QUIC in Chrome, enable it on command line and force it
on your site:
$ ./chrome --enable-quic --quic-version=h3-27 \
--origin-to-force-quic-on=example.com:8443
* Console clients
Known to work: ngtcp2, firefox's neqo and chromium's console clients:
$ examples/client 127.0.0.1 8443 https://example.com:8443/index.html
$ ./neqo-client https://127.0.0.1:8443/
$ chromium-build/out/my_build/quic_client http://example.com:8443 \
--quic_version=h3-27 \
--allow_unknown_root_cert \
--disable_certificate_verification
If you've got it right, in the access log you should see something like:
127.0.0.1 - - [24/Apr/2020:11:27:29 +0300] "GET / HTTP/3" 200 805 "-"
"nghttp3/ngtcp2 client" "quic" "h3-27"
5. Troubleshooting
Here are some tips that may help you to identify problems:
+ Ensure you are building with proper SSL library that
implements draft 27
+ Ensure you are using the proper SSL library in runtime
(`nginx -V` will show you what you are using)
+ Ensure your client is actually sending QUIC requests
(see "Clients" section about browsers and cache)
We recommend to start with simple console client like ngtcp2
to ensure you've got server configured properly before trying
with real browsers that may be very peaky with certificates,
for example.
+ Build nginx with debug support [7] and check your debug log.
It should contain all details about connection and why it
failed. All related messages contain "quic " prefix and can
be easily filtered out.
+ If you want to investigate deeper, you may want to enable
additional debugging in src/event/ngx_event_quic.h:
#define NGX_QUIC_DEBUG_PACKETS
#define NGX_QUIC_DEBUG_FRAMES
#define NGX_QUIC_DEBUG_FRAMES_ALLOC
#define NGX_QUIC_DEBUG_CRYPTO
6. Links
[1] https://tools.ietf.org/html/draft-ietf-quic-transport-27
[2] https://tools.ietf.org/html/draft-ietf-quic-http-27
[3] https://mailman.nginx.org/mailman/listinfo/nginx-devel
[4] https://boringssl.googlesource.com/boringssl/
[5] https://tools.ietf.org/html/draft-ietf-quic-recovery-27
[6] https://nginx.org/en/docs/http/ngx_http_core_module.html#listen
[7] https://nginx.org/en/docs/debugging_log.html
Reference in New Issue View Git Blame Copy Permalink