opencv/3rdparty/zlib-ng/crc32_braid.c

/* crc32_braid.c -- compute the CRC-32 of a data stream
 * Copyright (C) 1995-2022 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 *
 * This interleaved implementation of a CRC makes use of pipelined multiple
 * arithmetic-logic units, commonly found in modern CPU cores. It is due to
 * Kadatch and Jenkins (2010). See doc/crc-doc.1.0.pdf in this distribution.
 */

#include "zbuild.h"
#include "zutil.h"
#include "functable.h"
#include "crc32_braid_p.h"
#include "crc32_braid_tbl.h"

/* ========================================================================= */

const uint32_t * Z_EXPORT PREFIX(get_crc_table)(void) {
    return (const uint32_t *)crc_table;
}

#ifdef ZLIB_COMPAT
unsigned long Z_EXPORT PREFIX(crc32_z)(unsigned long crc, const unsigned char *buf, size_t len) {
    if (buf == NULL) return 0;

    return (unsigned long)functable.crc32((uint32_t)crc, buf, len);
}
#else
uint32_t Z_EXPORT PREFIX(crc32_z)(uint32_t crc, const unsigned char *buf, size_t len) {
    if (buf == NULL) return 0;

    return functable.crc32(crc, buf, len);
}
#endif

#ifdef ZLIB_COMPAT
unsigned long Z_EXPORT PREFIX(crc32)(unsigned long crc, const unsigned char *buf, unsigned int len) {
    return (unsigned long)PREFIX(crc32_z)((uint32_t)crc, buf, len);
}
#else
uint32_t Z_EXPORT PREFIX(crc32)(uint32_t crc, const unsigned char *buf, uint32_t len) {
    return PREFIX(crc32_z)(crc, buf, len);
}
#endif

/* ========================================================================= */

/*
  A CRC of a message is computed on N braids of words in the message, where
  each word consists of W bytes (4 or 8). If N is 3, for example, then three
  running sparse CRCs are calculated respectively on each braid, at these
  indices in the array of words: 0, 3, 6, ..., 1, 4, 7, ..., and 2, 5, 8, ...
  This is done starting at a word boundary, and continues until as many blocks
  of N * W bytes as are available have been processed. The results are combined
  into a single CRC at the end. For this code, N must be in the range 1..6 and
  W must be 4 or 8. The upper limit on N can be increased if desired by adding
  more #if blocks, extending the patterns apparent in the code. In addition,
  crc32 tables would need to be regenerated, if the maximum N value is increased.

  N and W are chosen empirically by benchmarking the execution time on a given
  processor. The choices for N and W below were based on testing on Intel Kaby
  Lake i7, AMD Ryzen 7, ARM Cortex-A57, Sparc64-VII, PowerPC POWER9, and MIPS64
  Octeon II processors. The Intel, AMD, and ARM processors were all fastest
  with N=5, W=8. The Sparc, PowerPC, and MIPS64 were all fastest at N=5, W=4.
  They were all tested with either gcc or clang, all using the -O3 optimization
  level. Your mileage may vary.
*/

/* ========================================================================= */

#if BYTE_ORDER == LITTLE_ENDIAN
#  define ZSWAPWORD(word) (word)
#  define BRAID_TABLE crc_braid_table
#elif BYTE_ORDER == BIG_ENDIAN
#  if W == 8
#    define ZSWAPWORD(word) ZSWAP64(word)
#  elif W == 4
#    define ZSWAPWORD(word) ZSWAP32(word)
#  endif
#  define BRAID_TABLE crc_braid_big_table
#else
#  error "No endian defined"
#endif
#define DO1 c = crc_table[(c ^ *buf++) & 0xff] ^ (c >> 8)
#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1

/* ========================================================================= */
#ifdef W
/*
  Return the CRC of the W bytes in the word_t data, taking the
  least-significant byte of the word as the first byte of data, without any pre
  or post conditioning. This is used to combine the CRCs of each braid.
 */
#if BYTE_ORDER == LITTLE_ENDIAN
static uint32_t crc_word(z_word_t data) {
    int k;
    for (k = 0; k < W; k++)
        data = (data >> 8) ^ crc_table[data & 0xff];
    return (uint32_t)data;
}
#elif BYTE_ORDER == BIG_ENDIAN
static z_word_t crc_word(z_word_t data) {
    int k;
    for (k = 0; k < W; k++)
        data = (data << 8) ^
            crc_big_table[(data >> ((W - 1) << 3)) & 0xff];
    return data;
}
#endif /* BYTE_ORDER */

#endif /* W */

/* ========================================================================= */
Z_INTERNAL uint32_t PREFIX(crc32_braid)(uint32_t crc, const uint8_t *buf, size_t len) {
    Z_REGISTER uint32_t c;

    /* Pre-condition the CRC */
    c = (~crc) & 0xffffffff;

#ifdef W
    /* If provided enough bytes, do a braided CRC calculation. */
    if (len >= N * W + W - 1) {
        size_t blks;
        z_word_t const *words;
        int k;

        /* Compute the CRC up to a z_word_t boundary. */
        while (len && ((uintptr_t)buf & (W - 1)) != 0) {
            len--;
            DO1;
        }

        /* Compute the CRC on as many N z_word_t blocks as are available. */
        blks = len / (N * W);
        len -= blks * N * W;
        words = (z_word_t const *)buf;

        z_word_t crc0, word0, comb;
#if N > 1
        z_word_t crc1, word1;
#if N > 2
        z_word_t crc2, word2;
#if N > 3
        z_word_t crc3, word3;
#if N > 4
        z_word_t crc4, word4;
#if N > 5
        z_word_t crc5, word5;
#endif
#endif
#endif
#endif
#endif
        /* Initialize the CRC for each braid. */
        crc0 = ZSWAPWORD(c);
#if N > 1
        crc1 = 0;
#if N > 2
        crc2 = 0;
#if N > 3
        crc3 = 0;
#if N > 4
        crc4 = 0;
#if N > 5
        crc5 = 0;
#endif
#endif
#endif
#endif
#endif
        /* Process the first blks-1 blocks, computing the CRCs on each braid independently. */
        while (--blks) {
            /* Load the word for each braid into registers. */
            word0 = crc0 ^ words[0];
#if N > 1
            word1 = crc1 ^ words[1];
#if N > 2
            word2 = crc2 ^ words[2];
#if N > 3
            word3 = crc3 ^ words[3];
#if N > 4
            word4 = crc4 ^ words[4];
#if N > 5
            word5 = crc5 ^ words[5];
#endif
#endif
#endif
#endif
#endif
            words += N;

            /* Compute and update the CRC for each word. The loop should get unrolled. */
            crc0 = BRAID_TABLE[0][word0 & 0xff];
#if N > 1
            crc1 = BRAID_TABLE[0][word1 & 0xff];
#if N > 2
            crc2 = BRAID_TABLE[0][word2 & 0xff];
#if N > 3
            crc3 = BRAID_TABLE[0][word3 & 0xff];
#if N > 4
            crc4 = BRAID_TABLE[0][word4 & 0xff];
#if N > 5
            crc5 = BRAID_TABLE[0][word5 & 0xff];
#endif
#endif
#endif
#endif
#endif
            for (k = 1; k < W; k++) {
                crc0 ^= BRAID_TABLE[k][(word0 >> (k << 3)) & 0xff];
#if N > 1
                crc1 ^= BRAID_TABLE[k][(word1 >> (k << 3)) & 0xff];
#if N > 2
                crc2 ^= BRAID_TABLE[k][(word2 >> (k << 3)) & 0xff];
#if N > 3
                crc3 ^= BRAID_TABLE[k][(word3 >> (k << 3)) & 0xff];
#if N > 4
                crc4 ^= BRAID_TABLE[k][(word4 >> (k << 3)) & 0xff];
#if N > 5
                crc5 ^= BRAID_TABLE[k][(word5 >> (k << 3)) & 0xff];
#endif
#endif
#endif
#endif
#endif
            }
        }

        /* Process the last block, combining the CRCs of the N braids at the same time. */
        comb = crc_word(crc0 ^ words[0]);
#if N > 1
        comb = crc_word(crc1 ^ words[1] ^ comb);
#if N > 2
        comb = crc_word(crc2 ^ words[2] ^ comb);
#if N > 3
        comb = crc_word(crc3 ^ words[3] ^ comb);
#if N > 4
        comb = crc_word(crc4 ^ words[4] ^ comb);
#if N > 5
        comb = crc_word(crc5 ^ words[5] ^ comb);
#endif
#endif
#endif
#endif
#endif
        words += N;
        c = ZSWAPWORD(comb);

        /* Update the pointer to the remaining bytes to process. */
        buf = (const unsigned char *)words;
    }

#endif /* W */

    /* Complete the computation of the CRC on any remaining bytes. */
    while (len >= 8) {
        len -= 8;
        DO8;
    }
    while (len) {
        len--;
        DO1;
    }

    /* Return the CRC, post-conditioned. */
    return c ^ 0xffffffff;
}