* Update videoio.hpp
add VideoCapturePropertie for clossbar input pin setting
* Update cap_dshow.cpp
For some kind of capture card, such as "avermedia cv710 " , it use SerialDigital as input pin and so it can not work.
Here added new PhysicalConnectorType enumeration: PhysConn_Video_YRYBY and PhysConn_Video_SerialDigital to support it.
And also provide new property parameter CAP_CROSSBAR_INPIN_TYPE to set the crossbar input pin type which will be used in videoInput::start(int deviceID, videoDevice *VD):
" if(VD->useCrossbar)
{
DebugPrintOut("SETUP: Checking crossbar\n");
routeCrossbar(&VD->pCaptureGraph, &VD->pVideoInputFilter, VD->connection, CAPTURE_MODE);
}
"
And at last ,fixed one issue for function setSizeAndSubtype, added code
pVih->rcSource.top = pVih->rcSource.left = pVih->rcTarget.top =pVih->rcTarget.left=0;
pVih->rcSource.right = pVih->rcTarget.right= attemptWidth;
pVih->rcSource.bottom = pVih->rcTarget.bottom = attemptHeight;
without these code , rcSource and rcTarget will keeping use default resolution and cause fail in hr = VD->streamConf->SetFormat(VD->pAmMediaType) and cannot find suitable MediaType.
Tested with python3 and mfc (Avermedia cv710)
Python3 code:
import cv2
print("test cv")
cap=cv2.VideoCapture(0)
cap.set(5,60)
cap.set(3,1920)
cap.set(4,1080)
cap.set(31,6)
ret,img=cap.read()
cv2.namedWindow("cap",cv2.WINDOW_NORMAL)
cv2.resizeWindow("cap",960,640);
while True:
ret,img=cap.read()
if ret==False:
continue
cv2.imshow("cap",img)
if cv2.waitKey(1) & 0xFF == ord('q'):
break
cap.release()
cv2.destroyAllWindows()
MFC code:
void CcvtestDlg::OnBnClickedButton1()
{
VideoCapture cap(0);
cap.set(CAP_PROP_FRAME_WIDTH, 1920);
cap.set(CAP_PROP_FRAME_HEIGHT, 1080);
cap.set(CAP_CROSSBAR_INPIN_TYPE , 6);
Mat img;
namedWindow("test", WINDOW_NORMAL);
resizeWindow("test", 960, 640);
while (1)
{
if (cap.read(img))
{
imshow("test", img);
if ('q' ==waitKey(1))
break;
}
}
destroyAllWindows();
cap.release();
}
* Update cap_dshow.cpp
* Update videoio.hpp
move enum value of CAP_CROSSBAR_INPIN_TYPE to the end of list
* Update videoio.hpp
* Update cap_dshow.cpp
removed trailing whitespace
* Update test_camera.cpp
Add test for capture device using PhysConn_Video_SerialDigital as crossbar input pin
* Update test_camera.cpp
Correction of misunderstanding about how to add test case.
The `codec_tag` is only available when opening a file from disk. If `AVStream` is a network stream then `fourcc` must be obtained using `codec_id`. I have tested the following scenarios:
1) Open a `.mp4` file and verify that `codec_tag` is returned (old behavior)
2) Open a `rtsp` stream and verify that `codec_fourcc` is returned (Tested with a MJPEG, H264 and H265 stream)
* may be an typo fix
* remove identical branch,may be paste error
* add parentheses around macro parameter
* simplify if condition
* check malloc fail
* change the condition of branch removed by commit 3041502861
Currently the private control enumeration will be stopped when QUERYCTRL
returns -EINVAL only. It is possible however that other errors occur.
One particular case is when the v4l2 device doesn't support any controls
and doesn't implement the QUERYCTRL ioctl. In that case the v4l2
framework returns -ENOTTY. In that case the current control enumeration
will go in an endless loop.
To fix this change the control enumeration stop condition. If any errors
occur, end the control enumeration.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
