G-API args serialization
* args serialization
* GRunArgP draft
* UMat added
* bind added
* DmitryM's review addressed. Code clean up required.
* fix android build
* bind test added
* more comments addressed
* try to fix Mac build
* clean up
* header-based generic implementation (GRunArg)
* clang again
* one more attempt for clang
* more clean up
* More Dmitry's comments addressed.
* monostate removed
* Top level functions and some other comments addressed.
* fix warnings
* disable warning
G-API Serialization routines
* Serialization backend in tests, initial version
* S11N/00: A Great Rename
- "Serialization" is too long and too error-prone to type,
so now it is renamed to "s11n" everywhere;
- Same applies to "SRLZ";
- Tests also renamed to start with 'S11N.*' (easier to run);
- Also updated copyright years in new files to 2020.
* S11N/01: Some basic interface segregation
- Moved some details (low-level functions) out of serialization.hpp;
- Introduced I::IStream and I::OStream interfaces;
- Implemented those via the existing [De]SerializationStream classes;
- Moved all operators to use interfaces instead of classes;
- Moved the htonl/ntohl handling out of operators (to the classes).
The implementation didn't change much, it is a subject to the further
refactoring
* S11N/02: Basic operator reorg, basic tests, vector support
- Reorganized operators on atomic types to follow >>/<< model
(put them closer in the code for the respective types);
- Introduce more operators for basic (scalar) types;
- Drop all vector s11n overloads -- replace with a generic
(template-based) one;
- Introduced a new test suite where low-level s11n functionality
is tested (for the basic types).
* S11N/03: Operators reorganization
- Sorted the Opaque types enum by complexity;
- Reorganized the existing operators for basic types, also ordered by
complexity;
- Organized operators in three groups (Basics, OpenCV, G-API);
- Added a generic serialization for variant<>;
- Reimplemented some of the existing operators (for OpenCV and G-API
data structures);
- Introduced new operators for cv::gimpl data types. These operators
(and so, the data structures) are not yet used in the graph
dump/reconstruction routine, it will be done as a next step.
* S11N/04: The Great Clean-up
- Drop the duplicates of GModel data structures from the
serialization, serialize the GModel data structures themselve
instead (hand-written code replaced with operators).
- Also removed usuned code for printing, etc.
* S11N/05: Internal API Clean-up
- Minimize the serialization API to just Streams and Operators;
- Refactor and fix the graph serialization (deconstruction and
reconstruction) routines, fix data addressing problems there;
- Move the serialization.[ch]pp files to the core G-API library
* S11N/06: Top-level API introduction
- !!!This is likely the most invasive commit in the series!!!
- Introduced a top-level API to serialize and deserialize a GComputation
- Extended the compiler to support both forms of a GComputation:
an expession based and a deserialized one. This has led to changes in
the cv::GComputation::Priv and in its dependent components (even the
transformation tests);
- Had to extend the kernel API (GKernel) with extra information on
operations (mainly `outMeta`) which was only available for expression
based graphs. Now the `outMeta` can be taken from kernels too (and for
the deserialized graphs it is the only way);
- Revisited the internal serialization API, had to expose previously
hidden entities (like `GSerialized`);
- Extended the serialized graph info with new details (object counter,
protocol). Added unordered_map generic serialization for that;
- Reworked the very first pipeline test to be "proper"; GREEN now, the rest
is to be reworked in the next iteration.
* S11N/07: Tests reworked
- Moved the sample pipeline tests w/serialization to
test the public API (`cv::gapi::serialize`, then
followed by `cv::gapi::deserialize<>`). All GREEN.
- As a consequence, dropped the "Serialization" test
backend as no longer necessary.
* S11N/08: Final touches
- Exposed the C++ native data types at Streams level;
- Switched the ByteMemoryIn/OutStreams to store data in `char`
internally (2x less memory for sample pipelines);
- Fixed and refactored Mat dumping to the stream;
- Renamed S11N pipeline tests to their new meaning.
* linux build fix
* fix RcDesc and int uint warnings
* more Linux build fix
* white space and virtual android error fix (attempt)
* more warnings to be fixed
* android warnings fix attempt
* one more attempt for android build fix
* android warnings one more fix
* return back override
* avoid size_t
* static deserialize
* and how do you like this, elon? anonymous namespace to fix android warning.
* static inline
* trying to fix standalone build
* mat dims fix
* fix mat r/w for standalone
Co-authored-by: Dmitry Matveev <dmitry.matveev@intel.com>
- reworked variant::operator(T&&) and varaint::variant(T&&) to be more
concise and signature accurate with C++17 specification
- restricted cv::detail::OpaqueRef::OpaqueRef(T&&) to not substitute
copy/move ctors
- moved common additions to C++11 version of std <type_traits> to
separte header
G-API: Laplacian and bilateralFilter standard kernels
* Added Laplacian kernel and tests
* Added: Laplacian kernel, Bilateral kernel (CPU, GPU); Performance and accuracy tests for this kernels
* Changed tolerance for GPU test
* boner
* Some changes with alignment; Tests's parameters are the same as for OCV
* Cut tests
* Compressed tests
* Minor changes (rsrt bb)
* Returned types
- kernel added to a cv::gapi::video namespace
- tests to check a kernels (based on cv::video tests for cv::buildOpticalFlowPyramid())
- tests for a combined G-API-pipeline (buildOpticalFlowPyramid() -> calcOpticalFlowPyrLK())
- tests for internal purposes added
- custom function for comparison in tests implemented
- opencv_gapi module is linked with opencv_video module (optional dependency)
- kernels added to a new cv::gapi::video namespace and a brand new files created to provide gapi_video environment
- there are 2 different kernels as G-API should provide GMat AND GArray<GMat> implementation: cv::calcOptFlowPyrLK doesn't calculate pyramids if vector<Mat> is given so just the cast GMat -> GArray<GMat> wouldn't represent all the cv:: functionality
- tests to check both kernels (based on cv::video tests for cv::calcOpticalFlowPyrLK())
- tests for internal purposes added
- vectors<T> comparison in tests implemented
- new (and old too) common test structures refactored to avoid code copypasting
- "modules/gapi/test/common/gapi_video_tests_common.hpp" created to share some code snippets between perf and acc tests and avoid code copypasting
- cv::gapi::goodFeaturesToTrack() kernel is implemented
- tests (for exact check with cv::goodFeaturesToTrack() and for internal cases) are implemented
- a custom comparison function for vectors and a custom test fixture implemented
- some posiible issues as wrong/inexact sorting of two compared vectors are
not taken into account
- initializations of an input Mat using a picture from opencv_extra implemented (function from gapi_streaming_test used)
G-API: Unification of own:: Scalar with cv:: Scalar
* cvdefs.hpp
* Small changes
* Deowned Scalar. Does't work
* Something
* Removed to_ocv for Scalar
* Clear code
* Deleted whitespaces
* Added include<..own/scalar.hpp in cvdefs.hpp.
* Long string split on two now
* Comment about scalar
* Comment about crutch
* Removed second varible in scalar_wrapper
* Changed wrapper for scalar, alignment
* Alignment
* Whitespaces
* Removed scalar_wrapper
G-API: Using functors as kernel implementation
* Implement ability to create kernel impls from functors
* Clean up
* Replace make_ocv_functor to ocv_kernel
* Clean up
* Replace GCPUFunctor -> GOCVFunctor
* Move GOCVFunctor to cv::gapi::cpu namespace
* Implement override for rvalue and lvalue cases
* Fix comments to review
* Remove GAPI_EXPORT for template functions
* Fix indentation
G-API: Fix various issues for 4.2 release
* G-API: Fix issues reported by Coverity
- Fixed: passing values by value instead of passing by reference
* G-API: Fix redundant std::move()'s in return statements
Fixes#15903
* G-API: Added a smarter handling of Stop messages in the pipeline
- This should fix the "expected 100, got 99 frames" problem
- Fixes#15882
* G-API: Pass enum instead of GKernelPackage in Streaming test parameters
- Likely fixes#15836
* G-API: Address review issues in new bugfix comments
G-API-NG/Streaming: don't require explicit metadata in compileStreaming()
* First probably working version
Hardcode gose to setSource() :)
* Pre final version of move metadata declaration from compileStreaming() to setSource().
* G-API-NG/Streaming: recovered the existing Streaming functionality
- The auto-meta test is disabling since it crashes.
- Restored .gitignore
* G-API-NG/Streaming: Made the meta-less compileStreaming() work
- Works fine even with OpenCV backend;
- Fluid doesn't support such kind of compilation so far - to be fixed
* G-API-NG/Streaming: Fix Fluid to support meta-less compilation
- Introduced a notion of metadata-sensitive passes and slightly
refactored GCompiler and GFluidBackend to support that
- Fixed a TwoVideoSourcesFail test on streaming
* Add three smoke streaming tests to gapi_streaming_tests.
All three teste run pipeline with two different input sets
1) SmokeTest_Two_Const_Mats test run pipeline with two const Mats
2) SmokeTest_One_Video_One_Const_Scalar test run pipleline with Mat(video source) and const Scalar
3) SmokeTest_One_Video_One_Const_Vector test run pipeline with Mat(video source) and const Vector
# Please enter the commit message for your changes. Lines starting
* style fix
* Some review stuff
* Some review stuff
* G-API-NG/Streaming: Introduced a Streaming API
Now a GComputation can be compiled in a special "streaming" way
and then "played" on a video stream.
Currently only VideoCapture is supported as an input source.
* G-API-NG/Streaming: added threading & real streaming
* G-API-NG/Streaming: Added tests & docs on Copy kernel
- Added very simple pipeline tests, not all data types are covered yet
(in fact, only GMat is tested now);
- Started testing non-OCV backends in the streaming mode;
- Added required fixes to Fluid backend, likely it works OK now;
- Added required fixes to OCL backend, and now it is likely broken
- Also added a UMat-based (OCL) version of Copy kernel
* G-API-NG/Streaming: Added own concurrent queue class
- Used only if TBB is not available
* G-API-NG/Streaming: Fixing various issues
- Added missing header to CMakeLists.txt
- Fixed various CI issues and warnings
* G-API-NG/Streaming: Fixed a compile-time GScalar queue deadlock
- GStreamingExecutor blindly created island's input queues for
compile-time (value-initialized) GScalars which didn't have any
producers, making island actor threads wait there forever
* G-API-NG/Streaming: Dropped own version of Copy kernel
One was added into master already
* G-API-NG/Streaming: Addressed GArray<T> review comments
- Added tests on mov()
- Removed unnecessary changes in garray.hpp
* G-API-NG/Streaming: Added Doxygen comments to new public APIs
Also fixed some other comments in the code
* G-API-NG/Streaming: Removed debug info, added some comments & renamed vars
* G-API-NG/Streaming: Fixed own-vs-cv abstraction leak
- Now every island is triggered with own:: (instead of cv::)
data objects as inputs;
- Changes in Fluid backend required to support cv::Mat/Scalar were
reverted;
* G-API-NG/Streaming: use holds_alternative<> instead of index/index_of test
- Also fixed regression test comments
- Also added metadata check comments for GStreamingCompiled
* G-API-NG/Streaming: Made start()/stop() more robust
- Fixed various possible deadlocks
- Unified the shutdown code
- Added more tests covering different corner cases on start/stop
* G-API-NG/Streaming: Finally fixed Windows crashes
In fact the problem hasn't been Windows-only.
Island thread popped data from queues without preserving the Cmd
objects and without taking the ownership over data acquired so when
islands started to process the data, this data may be already freed.
Linux version worked only by occasion.
* G-API-NG/Streaming: Fixed (I hope so) Windows warnings
* G-API-NG/Streaming: fixed typos in internal comments
- Also added some more explanation on Streaming/OpenCL status
* G-API-NG/Streaming: Added more unit tests on streaming
- Various start()/stop()/setSource() call flow combinations
* G-API-NG/Streaming: Added tests on own concurrent bounded queue
* G-API-NG/Streaming: Added more tests on various data types, + more
- Vector/Scalar passed as input;
- Vector/Scalar passed in-between islands;
- Some more assertions;
- Also fixed a deadlock problem when inputs are mixed (1 constant, 1 stream)
* G-API-NG/Streaming: Added tests on output data types handling
- Vector
- Scalar
* G-API-NG/Streaming: Fixed test issues with IE + Windows warnings
* G-API-NG/Streaming: Decoupled G-API from videoio
- Now the core G-API doesn't use a cv::VideoCapture directly,
it comes in via an abstract interface;
- Polished a little bit the setSource()/start()/stop() semantics,
now setSource() is mandatory before ANY call to start().
* G-API-NG/Streaming: Fix STANDALONE build (errors brought by render)
> Size parameter is changed from int to cv::Size type to allow rectangle kernels
> Kernel creation code is adopted for different kernel sizes to not create only white images on the output
G-API: add transformation logic to GCompiler
* Introduce transformation logic to GCOmpiler
* Remove partialOk() method
* Fix minor issues
* Refactor code according to code review
1. Re-design matchPatternToSubstitute logic
2. Update transformations order
3. Replace check_transformations pass with a
one time check in GCompiler ctor
* Revert unused nodes handling in pattern matching
* Address minor code review issues
* Address code review comments:
1) Fix some mistakes
2) Add new tests for endless loops
3) Update GCompiler's transformations logic
* Simplify GCompiler check for endless loops
1. Simplify transformations endless loops check:
- Original idea wasn't a full solution
- Need to develop a good method (heuristic?) to find loops
in general case (TODO)
2. Remove irrelevant Endless Loops tests
3. Add new "bad arg" tests and unit tests
* Update comments
* - headers in "infer/" and "infer/ie/" folders are included into gapi_ext_hdrs;
+ because of that a few #includes are required in the headers
- HAVE_INF_ENGINE flag check in headers "infer/ie.hpp" and "infer/ie/util.hpp" is deleted
* - the "ie/util.hpp" header is a private header now as it's used for tests; it's been moved to the scr directory to the place next to the implementation file "ie/giebackend.cpp"
- the path to this header in files "ie/giebackend.cpp" and "test/infer/gapi_infer_ie_test.cpp" is updated
- As it's private header now and explicitly depends on IE, the "HAVE_INF_ENGINE" flag check is returned
* Support GArray as input in fluid kernels
* Create tests on GArray input in fluid
* Some fixes to fully support GArray
* Refactor code and change the kernel according to review
* Add histogram calculation as a G-API kernel
Add assert that input GArgs in fluid contain at least one GMat
G-API: Fix Journal usage in Fluid backend (#15238)
* Fix Journal usage in Fluid backend
* Delete dumpDotRequired(): invalid check
* Update mem consumption test
* Test that new test works
* Debug memory consumption function
* Increase iterations in test
* Re-write memory consumption measurement part
* Restore correct fix for Fluid journals
* G-API: rename ArgKind OPAQUE to GOPAQUE
Rename ArgKind value to GOPAQUE to fix conflict in the
user code when wingdi.h is included: it defines OPAQUE
macro that (for some reason) is chosen instead of ArgKind
value
* Add compatibility with existing API
* Renamed GOPAQUE to OPAQUE_VAL
* G-API-NG/API: Introduced inference API and IE-based backend
- Very quick-n-dirty implementation
- OpenCV's own DNN module is not used
- No tests so far
* G-API-NG/IE: Refined IE backend, added more tests
* G-API-NG/IE: Fixed various CI warnings & build issues + tests
- Added tests on multi-dimensional own::Mat
- Added tests on GMatDesc with dimensions
- Documentation on infer.hpp
- Fixed more warnings + added a ROI list test
- Fix descr_of clash for vector<Mat> & standalone mode
- Fix build issue with gcc-4.8x
- Addressed review comments
* G-API-NG/IE: Addressed review comments
- Pass `false` to findDataFile()
- Add deprecation warning suppression macros for IE
* G-API: fix GOCLExecutable issue with UMat lifetime
Add tests on initialized/uninitialized outputs for all
backends
* Use proper clean-up procedure for magazine
* Rename InitOut test and reduce tested sizes
* Enable output allocation test
G-API: GAPI_TRANSFORM internal functionality rework (#14952)
* Change internal pattern and substitute signatures and refactor tests
* Enhance GArrayU with type-checker function
Add a couple of new tests on GAPI_TRANSFORM
G-API: clean up accuracy tests (#14945)
* Delete createOutputMatrices flag
Update the way compile args function is created
Fix instantiation suffix print function
* Update comment (NB)
* Make printable comparison functions
* Use defines instead of objects for compile args
* Remove custom printers, use operator<< overload
* Remove SAME_TYPE and use -1 instead
* Delete createOutputMatrices flag in new tests
* Fix GetParam() printed values
* Update Resize tests: use CompareF object
* Address code review feedback
* Add default cases for operator<< overloads
* change throw to GAPI_Assert
G-API: Add output allocation tests for backends (#15012)
* Add output tests for backends
* Fix large size test: output is in fact reallocated
* Use cv::Mat copies for reallocation tracking
* Separate LargeSizeWithCorrectSubmatrix test
* Rename backed output allocation tests
* Address code review feedback
Update test names
Add illustrative "expect (non-)empty" checks
Rename mat "copy" to mat reference
Add more pointer checks
* Add illustrative checks
- Added new graph compile time argument to specify multiple independent
ROIs (Tiles)
- Added new "executable" with serial loop other user specified
ROIs(Tiles)
- refactored graph traversal code into separate function to be called
once
- added saturate cast to Fluid AddCsimple test kernel
G-API planar kernels (#14917)
* Added resizeP with tests
* NV12 planar filters
* fix warnings in ResizeP test
* fix out mat ocv warning
* sz_on - > sz rename
* cpu tests new signature
* try to fix resizeP test
* trailing spaces remove
* doxygen doc fixed
* doxygen minor fix
* more doxygen fixes
* Doxygen corrected and extended after review.
G-API: Parameterized render tests (#14892)
* Init commit
* Add mat size as test parameter
* Add test for text render
* Add test for rect render
* Add tests for line and circle
* Remove old render tests
* Init output mats
* Remove methods input arguments
* Add comment about data loss in BGR2NV12 conversion
* Add edge test cases
* Replace default color for out mats black -> white
G-API: Introduce new approach to write accuracy tests (#14757)
* G-API: Introduce new common accuracy test fixture
* Enable Range<> to Seq<> implicit conversion
* Fix shadowing parameters
* Update license headers
* Rename ALIGNED_TYPE to SAME_TYPE
* Move MkRange to tests
* Fix TODO(agolubev) in test instantiations
* Squash simple fixture declarations in one line
* Remove unused line
* Fix Windows issues with macro expansion
* Choose between 1 or 2 matrix initialization
* Redesign common class behavior
Use "views" for GetParam() provided by GTest
base class instead of doing segregation
(with copy!) of common and specific parameters:
request common or specific parameter directly
by index from GetParam()-returned parameters
* Refine user-level API and usage of new test model
* Fix -fpermissive errors
* Remove unnecessary init calls
* Replace GCompileArgs member variable with func ptr
* Rename initMatsRandN to make its behavior explicit
Rename initMatsRandN to initMatrixRandN to eliminate confusion:
initMatsRandN only initialized first matrix (similarly to
initMatrixRandU)
* Fix common of initNothing
* Update copyright dates in missed files
* Add check for specific parameters
* Fix coment stlye
* Introduce GAPI_TRANSFORM initial interface
Comes along with simple tests and kernel package changes
* Fix documentation and adjust combine() function
* Fix stuff after rebasing on master
* Remove redundant functionality
* Refactoring according to review feedback provided
* Fixes according to review feedback
* Reconsider transformations return and fix a warning
* Fixes from code review
* Add a new simple test
* Cleanup, added tests on GScalar, GMatP, GArray
G-API: Add parameters alpha and beta in tests on ConvertTo kernel (#14684)
* Add parameters alpha and beta in tests on ConvertTo kernel
* Change tolerance function
* Reduce number of test cases
G-API: Kernel package design (#13851)
* Remove cv::unite_policy from API
* Add check that all id in kernel package are unique
* Refactor checker id procedure
* Remove cv::gapi::GLookupOrder from API
* Implement cv::gapi::use_only
* Fix samples
* Fix docs
* Fix comments to review
* Remove unite_policy
* Fix GKernelPackage::backends()
* Fix comments to review
* Fix all_unique
* Fix comments to review
* Fix comments to review
* Remove out of date tests
G-API external backend development (#13943)
* Moved HostCtor and ConstVal from gapi_priv.hpp to objref.hpp
* Added gmodel_priv.hpp, added export of symbols from gmodel.hpp
* Added export of binInArg and bindOutArg
* Renamed gapi_priv.*pp -> gorigin.*pp
* Added a fixme on collecting exports inside one class
Allow nodes produced after some operation to be
"unused": not being an output and not being used
as inputs to other operations
Add fluid test to cover this case
* Add Sobel kernel which returns both dx and dy
* Splice dx and dy and extend add_border function
Also change some tests parameters
* Add borderValue parameter in test
* Introduces fluid kernel for sobelxy
Adds tests (basic and performance) on new backend
* Introduces BufHelper struct for some arithmetic
GAPI: Add normalize kernel in G-API (#13721)
* Add normalize kernel in G-API
In addition add several tests on new kernel
* Fix indentations and normalize test structure
* Move normalize kernel from imgproc to core
Set default parameter ddepth to -1
* Fix alignment
* Return vector of MetaArg instead of MatDesc and fix test with ADL check
* Fix construction of vector
* Change names and tests according to review
Also add GAPI_EXPORTS prefix for two ostream operators
* Add version of descr_of function taking vector of Mat
* Overload descr_of function for cv::Mat
* Add template function instead of copypasting and change tests a little
More fixes for G-API tests (#13251)
* scalar comparator and more fixes for tests
* add weighted aligned
* white space
* more white space
* Add weighted test accuracy check enabled
* custom OpenCL G-API kernel draft
* clean up and warnings fix
* more warnings
* white space
* new blank line at the EOF removed
* HAVE_OPENCL guard
* remove unnecessary ocl API call
* remove sum test workaround
* check if opencl activated
* fix std::str warning
* CPU fall back for symm7x7
* gpu test kernel draft
* adjust have opencl guard
* more guards
* one more attempt to adjust guards
* empty stub files and kernel source files creation in the test directory
* try to force auto generation
* one more attempt to force build
* remove symm7x7 custom from gapi module
* looks like that this version works properly on Win desktop
* clean up
* more clean up
* address some suggestions from Dmitry's review
* const kernel coefficients
* CV_Error in kernel + try to fix cpu fallback
* CV_Error_ instead CV_Error
* everything in one gapi_gpu_test.cpp
* fix warning
* remove kernel generation, add kernel string
* avoid generated code and ocl internal namespace
* fix misprint
* c_str
* Added caching of agents execution sequence
* Merged linesRead() and nextWindow() methods on FluidAgent in one method
* Added caching of input lines for fluid::View
* Added caching of output lines for fluid::Buffer
* Fixed GAPI_Assert to work in standalone mode
* G-API: First steps with tutorial
* G-API Tutorial: First iteration
* G-API port of anisotropic image segmentation tutorial;
* Currently works via OpenCV only;
* Some new kernels have been required.
* G-API Tutorial: added chapters on execution code, inspection, and profiling
* G-API Tutorial: make Fluid kernel headers public
For some reason, these headers were not moved to the public
headers subtree during the initial development. Somehow it even
worked for the existing workloads.
* G-API Tutorial: Fix a couple of issues found during the work
* Introduced Phase & Sqrt kernels, OCV & Fluid versions
* Extended GKernelPackage to allow kernel removal & policies on include()
All the above stuff needs to be tested, tests will be added later
* G-API Tutorial: added chapter on running Fluid backend
* G-API Tutorial: fix a number of issues in the text
* G-API Tutorial - some final updates
- Fixed post-merge issues after Sobel kernel renaming;
- Simplified G-API code a little bit;
- Put a conclusion note in text.
* G-API Tutorial - fix build issues in test/perf targets
Public headers were refactored but tests suites were not updated in time
* G-API Tutorial: Added tests & reference docs on new kernels
* Phase
* Sqrt
* G-API Tutorial: added link to the tutorial from the main module doc
* G-API Tutorial: Added tests on new GKernelPackage functionality
* G-API Tutorial: Extended InRange tests to cover 32F
* G-API Tutorial: Misc fixes
* Avoid building examples when gapi module is not there
* Added a volatile API disclaimer to G-API root documentation page
* G-API Tutorial: Fix perf tests build issue
This change came from master where Fluid kernels are still used
incorrectly.
* G-API Tutorial: Fixed channels support in Sqrt/Phase fluid kernels
Extended tests to cover this case
* G-API Tutorial: Fix text problems found on team review
G-API GPU-OpenCL backend (#13008)
* gpu/ocl backend core
* accuracy tests added and adjusted + license headers
* GPU perf. tests added; almost all adjusted to pass
* all tests adjusted and passed - ready for pull request
* missing license headers
* fix warning (workaround RGB2Gray)
* fix c++ magic
* precompiled header
* white spaces
* try to fix warning and blur test
* try to fix Blur perf tests
* more alignments with the latest cpu backend
* more gapi tests refactoring + 1 more UB issue fix + more informative tolerance exceed reports
* white space fix
* try workaround for SumTest
* GAPI_EXPORTS instead CV_EXPORTS
