* add findEssentialMat for two different cameras
* added smoke test for the newly added variant of findEssentialMatrix
Co-authored-by: tompollok <tom.pollok@gmail.com>
fix instable fisheye undistortPoints
* remove artefacts when (un)distorting fisheye images with large distortion coefficient values
* fix fisheye undistortion when theta is close to zero
* add fisheye image undistort and distort test
* Fixed type conversion warnings
* fixed trailing whitespace
* Fixed indexing in prefilter
* Initialised prefilter
* Initialised prefilter with value initialisation
* Added TC to trigger different Mem Allocs in BufferBM
* Optimize cases with only needed conditions
added estimateTranslation3D to calib3d/ptsetreg
* added estimateTranslation3D; follows API and implementation structure for estimateAffine3D, but only allows for translation
* void variables in null function to suppress compiler warnings
* added test for estimateTranslation3D
* changed to Matx13d datatype for translation vector in ptsetreg and test; used short license in test
* removed iostream include
* calib3d: code cleanup
Image sharpness, as well as brightness, are a critical parameter for
accuracte camera calibration. For accessing these parameters for
filtering out problematic calibraiton images, this method calculates
edge profiles by traveling from black to white chessboard cell centers.
Based on this, the number of pixels is calculated required to transit
from black to white. This width of the transition area is a good
indication of how sharp the chessboard is imaged and should be below
~3.0 pixels.
Based on this also motion blur can be detectd by comparing sharpness in
vertical and horizontal direction. All unsharp images should be excluded
from calibration as they will corrupt the calibration result. The same
is true for overexposued images due to a none-linear sensor response.
This can be detected by looking at the average cell brightness of the
detected chessboard.
Add checks for empty operands in Matrix expressions that don't check properly
* Starting to add checks for empty operands in Matrix expressions that
don't check properly.
* Adding checks and delcarations for checker functions
* Fix signatures and add checks for each class of Matrix Expr operation
* Make it catch the right exception
* Don't expose helper functions to public API
(1/4) Revert "Correct image borders and principal point computation in cv::stereoRectify"
This reverts commit 93ff1fb2f2.
(2/4) Revert "fix calib3d changes in 6836 plus some others"
This reverts commit fa42a1cfc2.
(3/4) Revert "fix compiler warning"
This reverts commit b3d55489d3.
(4/4) Revert "add test for 6836"
This reverts commit d06b8c4ea9.
* issue 5769 fixed: cv::stereoRectify fails if given inliers mask of type vector<uchar>
* issue5769 fix using reshape and add regression test
* regression test with outlier detection, testing vector and mat data
* Size comparision of wrong vector within CV_Assert in regression test corrected
* cleanup test code
* integrated the new C++ persistence; removed old persistence; most of OpenCV compiles fine! the tests have not been run yet
* fixed multiple bugs in the new C++ persistence
* fixed raw size of the parsed empty sequences
* [temporarily] excluded obsolete applications traincascade and createsamples from build
* fixed several compiler warnings and multiple test failures
* undo changes in cocoa window rendering (that was fixed in another PR)
* fixed more compile warnings and the remaining test failures (hopefully)
* trying to fix the last little warning
More accurate pinhole camera calibration with imperfect planar target (#12772)
43 commits:
* Add derivatives with respect to object points
Add an output parameter to calculate derivatives of image points with
respect to 3D coordinates of object points. The output jacobian matrix
is a 2Nx3N matrix where N is the number of points.
This commit introduces incompatibility to old function signature.
* Set zero for dpdo matrix before using
dpdo is a sparse matrix with only non-zero value close to major
diagonal. Set it to zero because only elements near major diagonal are
computed.
* Add jacobian columns to projectPoints()
The output jacobian matrix of derivatives with respect to coordinates of
3D object points are added. This might break callers who assume the
columns of jacobian matrix.
* Adapt test code to updated project functions
The test cases for projectPoints() and cvProjectPoints2() are updated to
fit new function signatures.
* Add accuracy test code for dpdo
* Add badarg test for dpdo
* Add new enum item for new calibration method
CALIB_RELEASE_OBJECT is used to whether to release 3D coordinates of
object points. The method was proposed in: K. H. Strobl and G. Hirzinger.
"More Accurate Pinhole Camera Calibration with Imperfect Planar Target".
In Proceedings of the IEEE International Conference on Computer Vision
(ICCV 2011), 1st IEEE Workshop on Challenges and Opportunities in Robot
Perception, Barcelona, Spain, pp. 1068-1075, November 2011.
* Add releasing object method into internal function
It's a simple extension of the standard calibration scheme. We choose to
fix the first and last object point and a user-selected fixed point.
* Add interfaces for extended calibration method
* Refine document for calibrateCamera()
When releasing object points, only the z coordinates of the
objectPoints[0].back is fixed.
* Add link to strobl2011iccv paper
* Improve documentation for calibrateCamera()
* Add implementations of wrapping calibrateCamera()
* Add checking for params of new calibration method
If input parameters are not qualified, then fall back to standard
calibration method.
* Add camera calibration method of releasing object
The current implementation is equal to or better than
https://github.com/xoox/calibrel
* Update doc for CALIB_RELEASE_OBJECT
CALIB_USE_QR or CALIB_USE_LU could be used for faster calibration with
potentially less precise and less stable in some rare cases.
* Add RELEASE_OBJECT calibration to tutorial code
To select the calibration method of releasing object points, a command
line parameter `-d=<number>` should be provided.
* Update tutorial doc for camera_calibration
If the method of releasing object points is merged into OpenCV. It will
be expected to be firstly released in 4.1, I think.
* Reduce epsilon for cornerSubPix()
Epsilon of 0.1 is a bigger one. Preciser corner positions are required
with calibration method of releasing object.
* Refine camera calibration tutorial
The hypothesis coordinates are used to indicate which distance must be
measured between two specified object points.
* Update sample calibration code method selection
Similar to camera_calibration tutorial application, a command line
argument `-dt=<number>` is used to select the calibration method.
* Add guard to flags of cvCalibrateCamera2()
cvCalibrateCamera2() doesn't accept CALIB_RELEASE_OBJECT unless overload
interface is added in the future.
* Simplify fallback when iFixedPoint is out of range
* Refactor projectPoints() to keep compatibilities
* Fix arg string "Bad rvecs header"
* Read calibration flags from test data files
Instead of being hard coded into source file, the calibration flags will
be read from test data files.
opencv_extra/testdata/cv/cameracalibration/calib?.dat must be sync with
the test code.
* Add new C interface of cvCalibrateCamera4()
With this new added C interface, the extended calibration method with
CALIB_RELEASE_OBJECT can be called by C API.
* Add regression test of extended calibration method
It has been tested with new added test data in xoox:calib-release-object
branch of opencv_extra.
* Fix assertion in test_cameracalibration.cpp
The total number of refined 3D object coordinates is checked.
* Add checker for iFixedPoint in cvCalibrateCamera4
If iFixedPoint is out of rational range, fall back to standard method.
* Fix documentation for overloaded calibrateCamera()
* Remove calibration flag of CALIB_RELEASE_OBJECT
The method selection is based on the range of the index of fixed point.
For minus values, standard calibration method will be chosen. Values in
a rational range will make the object-releasing calibration method
selected.
* Use new interfaces instead of function overload
Existing interfaces are preserved and new interfaces are added. Since
most part of the code base are shared, calibrateCamera() is now a
wrapper function of calibrateCameraRO().
* Fix exported name of calibrateCameraRO()
* Update documentation for calibrateCameraRO()
The circumstances where this method is mostly helpful are described.
* Add note on the rigidity of the calibration target
* Update documentation for calibrateCameraRO()
It is clarified that iFixedPoint is used as a switch to select
calibration method. If input data are not qualified, exceptions will be
thrown instead of fallback scheme.
* Clarify iFixedPoint as switch and remove fallback
iFixedPoint is now used as a switch for calibration method selection. No
fallback scheme is utilized anymore. If the input data are not
qualified, exceptions will be thrown.
* Add badarg test for object-releasing method
* Fix document format of sample list
List items of same level should be indented the same way. Otherwise they
will be formatted as nested lists by Doxygen.
* Add brief intro for objectPoints and imagePoints
* Sync tutorial to sample calibration code
* Update tutorial compatibility version to 4.0
- avoid updating of input image during equalizeHist() call
- avoid for() with double variable (use 'int' instead)
- more CV_Check*() macros
- use Mat_<T>, Matx
- static for local variables
* add new chessboard detector
The chessboar detector is based on the paper.
Accurate Detection and Localization of Checkerboard Corners for
Calibration Alexander Duda, Udo Frese
British Machine Vision Conference, o.A., 2018.
It utilizes point symmetry of checkerboard corners in combination with a
localized Radon transform approximated by box filters to achieve high
performance even on large images. Here, tests have shown that the
ability to localize checkerboard corners is close to the theoretical
limit of 1/100 of a pixel while being considerably less sensitive
to image noise than standard methods.
* chessboard: add reference to bibtex file
* chessboard: add dependency to opencv_flann
* fix: test chesscorners. It is valid to return an empty list
In case no chessboard was detected it should be valid for the detector
to return an empty list.
For simplifcation, it should be allowed to return any number of corners
if they are flagged as not found.
* fix: opencv.bib remove empty lines
* fix: doc findChessboardCorners replace cvSize with cv::Size
* chessboard tests: factor out logic selecting detector
* chessboard: add unit test for findChessboardCorners2
This is includes a new chessboard generator which supports subpix
corners with high accuracy by wrapping an optimal chessboard using
wrapPerspective.
* fix: chessboard unit test - overwrite of default parameter flag of findCirclesGrid
* chessboard: remove trailing whitespace
* chessboard: fix debug drawing
* chessboard: fix some issues during code review
* chessboard: normalize asymmetric chessboard
* chessboard: fix float double warning
* remove trailing whitespace
* chessboards: fix compiler warnings
* chessboards: fix compiler warnings
* checkerboard: some performance improvements
* chessboard: remove NULL macros for language bindinges from internal headers
* chessboard: shorten license terms
* chessboard: remove unused internal method
* chessboard: set helper functions to static
* chessboard: fix normalizePoints1D using unshifted points
* chessboard: remove wrongly copied text
* chessboard: use CV_CheckTypeEQ macro
* chessboard: comment all NaN checks
* chessboard: use consistent color conversion
* chessboard: use CheckChannelEQ macro
* chessboard: assume gray color image for internal methods
* chessboard: use std::swap
* chessboard: use Mat.dataend
* chessboard: fix compiler warnings
* chessboard: replace some checks witch CV_CHECK macro
* chessboard: fix comparison function for partial sort
* chessboard: small cleanup
* chessboard: use short license header
* chessboard: rename findChessboard2 to findChessboardSB
* chessboard: fix type in unit test
* trying to fix the custom AVX2 builder test failures (false alarms)
* fixed compile error with CPU_BASELINE=AVX2 on x86; raised tolerance thresholds in a couple of tests
* fixed compile error with CPU_BASELINE=AVX2 on x86; raised tolerance thresholds in a couple of tests
* fixed compile error with CPU_BASELINE=AVX2 on x86; raised tolerance thresholds in a couple of tests
* seemingly disabled false alarm warning in surf.cpp; increased tolerance thresholds in the tests for SolvePnP and in DNN/ENet
* Add HPX backend for OpenCV implementation
Adds hpx backend for cv::parallel_for_() calls respecting the nstripes chunking parameter. C++ code for the backend is added to modules/core/parallel.cpp. Also, the necessary changes to cmake files are introduced.
Backend can operate in 2 versions (selectable by cmake build option WITH_HPX_STARTSTOP): hpx (runtime always on) and hpx_startstop (start and stop the backend for each cv::parallel_for_() call)
* WIP: Conditionally include hpx_main.hpp to tests in core module
Header hpx_main.hpp is included to both core/perf/perf_main.cpp and core/test/test_main.cpp.
The changes to cmake files for linking hpx library to above mentioned test executalbles are proposed but have issues.
* Add coditional iclusion of hpx_main.hpp to cpp cpu modules
* Remove start/stop version of hpx backend
* Add functionality to filter homography decompositions
* documentation + small refactor
* fix comparing int to size_t (compiler warning)
* fix whitespace issues
* clarification of function return values in documentation
* refactor of function parameters and change in loop nesting
* cleanup useless .h, fix size_t to int compare, small refactor
* fix documentation and whitespace
* change output from return value to outputarray parameter
* update function docs to reflect changes in parameters
* whitespace
* failing test
* fixed warnings related to extended initialisers and improper types
* initialize vectors from arrays
* initialize vectors from arrays part 2
* fix whitespace
* fix trailing whitespace
* Include <inttypes.h> in test_filter_homography_decomp.cpp, should fix 'uint8_t' : undeclared identifier error
* updated the test (made it shorter and providing better diagnostic) and significantly improved implementation (get rid of heavy repeated and/or unnecessary operations)
* fixed compile warning; removed trailing whitespace
fixes handling of empty matrices in some functions (#11634)
* a part of PR #11416 by Yuki Takehara
* moved the empty mat check in Mat::copyTo()
* fixed some test failures
- removed tr1 usage (dropped in C++17)
- moved includes of vector/map/iostream/limits into ts.hpp
- require opencv_test + anonymous namespace (added compile check)
- fixed norm() usage (must be from cvtest::norm for checks) and other conflict functions
- added missing license headers
