/*M/////////////////////////////////////////////////////////////////////////////////////// // // IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING. // // By downloading, copying, installing or using the software you agree to this license. // If you do not agree to this license, do not download, install, // copy or use the software. // // // Intel License Agreement // For Open Source Computer Vision Library // // Copyright (C) 2000, Intel Corporation, all rights reserved. // Third party copyrights are property of their respective owners. // // Redistribution and use in source and binary forms, with or without modification, // are permitted provided that the following conditions are met: // // * Redistribution's of source code must retain the above copyright notice, // this list of conditions and the following disclaimer. // // * Redistribution's in binary form must reproduce the above copyright notice, // this list of conditions and the following disclaimer in the documentation // and/or other materials provided with the distribution. // // * The name of Intel Corporation may not be used to endorse or promote products // derived from this software without specific prior written permission. // // This software is provided by the copyright holders and contributors "as is" and // any express or implied warranties, including, but not limited to, the implied // warranties of merchantability and fitness for a particular purpose are disclaimed. // In no event shall the Intel Corporation or contributors be liable for any direct, // indirect, incidental, special, exemplary, or consequential damages // (including, but not limited to, procurement of substitute goods or services; // loss of use, data, or profits; or business interruption) however caused // and on any theory of liability, whether in contract, strict liability, // or tort (including negligence or otherwise) arising in any way out of // the use of this software, even if advised of the possibility of such damage. // //M*/ #include "test_precomp.hpp" using namespace cv; using namespace std; /*static int cvTsPointConvexPolygon( CvPoint2D32f pt, CvPoint2D32f* v, int n ) { CvPoint2D32f v0 = v[n-1]; int i, sign = 0; for( i = 0; i < n; i++ ) { CvPoint2D32f v1 = v[i]; float dx = pt.x - v0.x, dy = pt.y - v0.y; float dx1 = v1.x - v0.x, dy1 = v1.y - v0.y; double t = (double)dx*dy1 - (double)dx1*dy; if( fabs(t) > DBL_EPSILON ) { if( t*sign < 0 ) break; if( sign == 0 ) sign = t < 0 ? -1 : 1; } else if( fabs(dx) + fabs(dy) < DBL_EPSILON ) return i+1; v0 = v1; } return i < n ? -1 : 0; }*/ CV_INLINE double cvTsDist( CvPoint2D32f a, CvPoint2D32f b ) { double dx = a.x - b.x; double dy = a.y - b.y; return sqrt(dx*dx + dy*dy); } CV_INLINE double cvTsPtLineDist( CvPoint2D32f pt, CvPoint2D32f a, CvPoint2D32f b ) { double d0 = cvTsDist( pt, a ), d1; double dd = cvTsDist( a, b ); if( dd < FLT_EPSILON ) return d0; d1 = cvTsDist( pt, b ); dd = fabs((double)(pt.x - a.x)*(b.y - a.y) - (double)(pt.y - a.y)*(b.x - a.x))/dd; d0 = MIN( d0, d1 ); return MIN( d0, dd ); } static double cvTsPointPolygonTest( CvPoint2D32f pt, const CvPoint2D32f* vv, int n, int* _idx=0, int* _on_edge=0 ) { int i; CvPoint2D32f v = vv[n-1], v0; double min_dist_num = FLT_MAX, min_dist_denom = 1; int min_dist_idx = -1, min_on_edge = 0; int counter = 0; double result; for( i = 0; i < n; i++ ) { double dx, dy, dx1, dy1, dx2, dy2, dist_num, dist_denom = 1; int on_edge = 0, idx = i; v0 = v; v = vv[i]; dx = v.x - v0.x; dy = v.y - v0.y; dx1 = pt.x - v0.x; dy1 = pt.y - v0.y; dx2 = pt.x - v.x; dy2 = pt.y - v.y; if( dx2*dx + dy2*dy >= 0 ) dist_num = dx2*dx2 + dy2*dy2; else if( dx1*dx + dy1*dy <= 0 ) { dist_num = dx1*dx1 + dy1*dy1; idx = i - 1; if( idx < 0 ) idx = n-1; } else { dist_num = (dy1*dx - dx1*dy); dist_num *= dist_num; dist_denom = dx*dx + dy*dy; on_edge = 1; } if( dist_num*min_dist_denom < min_dist_num*dist_denom ) { min_dist_num = dist_num; min_dist_denom = dist_denom; min_dist_idx = idx; min_on_edge = on_edge; if( min_dist_num == 0 ) break; } if( (v0.y <= pt.y && v.y <= pt.y) || (v0.y > pt.y && v.y > pt.y) || (v0.x < pt.x && v.x < pt.x) ) continue; dist_num = dy1*dx - dx1*dy; if( dy < 0 ) dist_num = -dist_num; counter += dist_num > 0; } result = sqrt(min_dist_num/min_dist_denom); if( counter % 2 == 0 ) result = -result; if( _idx ) *_idx = min_dist_idx; if( _on_edge ) *_on_edge = min_on_edge; return result; } static cv::Point2f cvTsMiddlePoint(const cv::Point2f &a, const cv::Point2f &b) { return cv::Point2f((a.x + b.x) / 2, (a.y + b.y) / 2); } static bool cvTsIsPointOnLineSegment(const cv::Point2f &x, const cv::Point2f &a, const cv::Point2f &b) { double d1 = cvTsDist(CvPoint2D32f(x.x, x.y), CvPoint2D32f(a.x, a.y)); double d2 = cvTsDist(CvPoint2D32f(x.x, x.y), CvPoint2D32f(b.x, b.y)); double d3 = cvTsDist(CvPoint2D32f(a.x, a.y), CvPoint2D32f(b.x, b.y)); return (abs(d1 + d2 - d3) <= (1E-5)); } /****************************************************************************************\ * Base class for shape descriptor tests * \****************************************************************************************/ class CV_BaseShapeDescrTest : public cvtest::BaseTest { public: CV_BaseShapeDescrTest(); virtual ~CV_BaseShapeDescrTest(); void clear(); protected: int read_params( CvFileStorage* fs ); void run_func(void); int prepare_test_case( int test_case_idx ); int validate_test_results( int test_case_idx ); virtual void generate_point_set( void* points ); virtual void extract_points(); int min_log_size; int max_log_size; int dims; bool enable_flt_points; CvMemStorage* storage; CvSeq* points1; CvMat* points2; void* points; void* result; double low_high_range; CvScalar low, high; bool test_cpp; }; CV_BaseShapeDescrTest::CV_BaseShapeDescrTest() { points1 = 0; points2 = 0; points = 0; storage = 0; test_case_count = 500; min_log_size = 0; max_log_size = 10; low = high = cvScalarAll(0); low_high_range = 50; dims = 2; enable_flt_points = true; test_cpp = false; } CV_BaseShapeDescrTest::~CV_BaseShapeDescrTest() { clear(); } void CV_BaseShapeDescrTest::clear() { cvtest::BaseTest::clear(); cvReleaseMemStorage( &storage ); cvReleaseMat( &points2 ); points1 = 0; points = 0; } int CV_BaseShapeDescrTest::read_params( CvFileStorage* fs ) { int code = cvtest::BaseTest::read_params( fs ); if( code < 0 ) return code; test_case_count = cvReadInt( find_param( fs, "struct_count" ), test_case_count ); min_log_size = cvReadInt( find_param( fs, "min_log_size" ), min_log_size ); max_log_size = cvReadInt( find_param( fs, "max_log_size" ), max_log_size ); min_log_size = cvtest::clipInt( min_log_size, 0, 8 ); max_log_size = cvtest::clipInt( max_log_size, 0, 10 ); if( min_log_size > max_log_size ) { int t; CV_SWAP( min_log_size, max_log_size, t ); } return 0; } void CV_BaseShapeDescrTest::generate_point_set( void* pointsSet ) { RNG& rng = ts->get_rng(); int i, k, n, total, point_type; CvSeqReader reader; uchar* data = 0; double a[4], b[4]; for( k = 0; k < 4; k++ ) { a[k] = high.val[k] - low.val[k]; b[k] = low.val[k]; } memset( &reader, 0, sizeof(reader) ); if( CV_IS_SEQ(pointsSet) ) { CvSeq* ptseq = (CvSeq*)pointsSet; total = ptseq->total; point_type = CV_SEQ_ELTYPE(ptseq); cvStartReadSeq( ptseq, &reader ); } else { CvMat* ptm = (CvMat*)pointsSet; assert( CV_IS_MAT(ptm) && CV_IS_MAT_CONT(ptm->type) ); total = ptm->rows + ptm->cols - 1; point_type = CV_MAT_TYPE(ptm->type); data = ptm->data.ptr; } n = CV_MAT_CN(point_type); point_type = CV_MAT_DEPTH(point_type); assert( (point_type == CV_32S || point_type == CV_32F) && n <= 4 ); for( i = 0; i < total; i++ ) { int* pi; float* pf; if( reader.ptr ) { pi = (int*)reader.ptr; pf = (float*)reader.ptr; CV_NEXT_SEQ_ELEM( reader.seq->elem_size, reader ); } else { pi = (int*)data + i*n; pf = (float*)data + i*n; } if( point_type == CV_32S ) for( k = 0; k < n; k++ ) pi[k] = cvRound(cvtest::randReal(rng)*a[k] + b[k]); else for( k = 0; k < n; k++ ) pf[k] = (float)(cvtest::randReal(rng)*a[k] + b[k]); } } int CV_BaseShapeDescrTest::prepare_test_case( int test_case_idx ) { int size; int use_storage = 0; int point_type; int i; RNG& rng = ts->get_rng(); cvtest::BaseTest::prepare_test_case( test_case_idx ); clear(); size = cvRound( exp((cvtest::randReal(rng) * (max_log_size - min_log_size) + min_log_size)*CV_LOG2) ); use_storage = cvtest::randInt(rng) % 2; point_type = CV_MAKETYPE(cvtest::randInt(rng) % (enable_flt_points ? 2 : 1) ? CV_32F : CV_32S, dims); if( use_storage ) { storage = cvCreateMemStorage( (cvtest::randInt(rng)%10 + 1)*1024 ); points1 = cvCreateSeq( point_type, sizeof(CvSeq), CV_ELEM_SIZE(point_type), storage ); cvSeqPushMulti( points1, 0, size ); points = points1; } else { int rows = 1, cols = size; if( cvtest::randInt(rng) % 2 ) rows = size, cols = 1; points2 = cvCreateMat( rows, cols, point_type ); points = points2; } for( i = 0; i < 4; i++ ) { low.val[i] = (cvtest::randReal(rng)-0.5)*low_high_range*2; high.val[i] = (cvtest::randReal(rng)-0.5)*low_high_range*2; if( low.val[i] > high.val[i] ) { double t; CV_SWAP( low.val[i], high.val[i], t ); } if( high.val[i] < low.val[i] + 1 ) high.val[i] += 1; } generate_point_set( points ); test_cpp = (cvtest::randInt(rng) & 16) == 0; return 1; } void CV_BaseShapeDescrTest::extract_points() { if( points1 ) { points2 = cvCreateMat( 1, points1->total, CV_SEQ_ELTYPE(points1) ); cvCvtSeqToArray( points1, points2->data.ptr ); } if( CV_MAT_DEPTH(points2->type) != CV_32F && enable_flt_points ) { CvMat tmp = cvMat( points2->rows, points2->cols, (points2->type & ~CV_MAT_DEPTH_MASK) | CV_32F, points2->data.ptr ); cvConvert( points2, &tmp ); } } void CV_BaseShapeDescrTest::run_func(void) { } int CV_BaseShapeDescrTest::validate_test_results( int /*test_case_idx*/ ) { extract_points(); return 0; } /****************************************************************************************\ * Convex Hull Test * \****************************************************************************************/ class CV_ConvHullTest : public CV_BaseShapeDescrTest { public: CV_ConvHullTest(); virtual ~CV_ConvHullTest(); void clear(); protected: void run_func(void); int prepare_test_case( int test_case_idx ); int validate_test_results( int test_case_idx ); CvSeq* hull1; CvMat* hull2; void* hull_storage; int orientation; int return_points; }; CV_ConvHullTest::CV_ConvHullTest() { hull1 = 0; hull2 = 0; hull_storage = 0; orientation = return_points = 0; } CV_ConvHullTest::~CV_ConvHullTest() { clear(); } void CV_ConvHullTest::clear() { CV_BaseShapeDescrTest::clear(); cvReleaseMat( &hull2 ); hull1 = 0; hull_storage = 0; } int CV_ConvHullTest::prepare_test_case( int test_case_idx ) { int code = CV_BaseShapeDescrTest::prepare_test_case( test_case_idx ); int use_storage_for_hull = 0; RNG& rng = ts->get_rng(); if( code <= 0 ) return code; orientation = cvtest::randInt(rng) % 2 ? CV_CLOCKWISE : CV_COUNTER_CLOCKWISE; return_points = cvtest::randInt(rng) % 2; use_storage_for_hull = (cvtest::randInt(rng) % 2) && !test_cpp; if( use_storage_for_hull ) { if( !storage ) storage = cvCreateMemStorage( (cvtest::randInt(rng)%10 + 1)*1024 ); hull_storage = storage; } else { int rows, cols; int sz = points1 ? points1->total : points2->cols + points2->rows - 1; int point_type = points1 ? CV_SEQ_ELTYPE(points1) : CV_MAT_TYPE(points2->type); if( cvtest::randInt(rng) % 2 ) rows = sz, cols = 1; else rows = 1, cols = sz; hull2 = cvCreateMat( rows, cols, return_points ? point_type : CV_32SC1 ); hull_storage = hull2; } return code; } void CV_ConvHullTest::run_func() { if(!test_cpp) hull1 = cvConvexHull2( points, hull_storage, orientation, return_points ); else { cv::Mat _points = cv::cvarrToMat(points); bool clockwise = orientation == CV_CLOCKWISE; size_t n = 0; if( !return_points ) { std::vector _hull; cv::convexHull(_points, _hull, clockwise); n = _hull.size(); memcpy(hull2->data.ptr, &_hull[0], n*sizeof(_hull[0])); } else if(_points.type() == CV_32SC2) { std::vector _hull; cv::convexHull(_points, _hull, clockwise); n = _hull.size(); memcpy(hull2->data.ptr, &_hull[0], n*sizeof(_hull[0])); } else if(_points.type() == CV_32FC2) { std::vector _hull; cv::convexHull(_points, _hull, clockwise); n = _hull.size(); memcpy(hull2->data.ptr, &_hull[0], n*sizeof(_hull[0])); } if(hull2->rows > hull2->cols) hull2->rows = (int)n; else hull2->cols = (int)n; } } int CV_ConvHullTest::validate_test_results( int test_case_idx ) { int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx ); CvMat* hull = 0; CvMat* mask = 0; int i, point_count, hull_count; CvPoint2D32f *p, *h; CvSeq header, hheader, *ptseq, *hseq; CvSeqBlock block, hblock; if( points1 ) ptseq = points1; else ptseq = cvMakeSeqHeaderForArray( CV_MAT_TYPE(points2->type), sizeof(CvSeq), CV_ELEM_SIZE(points2->type), points2->data.ptr, points2->rows + points2->cols - 1, &header, &block ); point_count = ptseq->total; p = (CvPoint2D32f*)(points2->data.ptr); if( hull1 ) hseq = hull1; else hseq = cvMakeSeqHeaderForArray( CV_MAT_TYPE(hull2->type), sizeof(CvSeq), CV_ELEM_SIZE(hull2->type), hull2->data.ptr, hull2->rows + hull2->cols - 1, &hheader, &hblock ); hull_count = hseq->total; hull = cvCreateMat( 1, hull_count, CV_32FC2 ); mask = cvCreateMat( 1, hull_count, CV_8UC1 ); cvZero( mask ); Mat _mask = cvarrToMat(mask); h = (CvPoint2D32f*)(hull->data.ptr); // extract convex hull points if( return_points ) { cvCvtSeqToArray( hseq, hull->data.ptr ); if( CV_SEQ_ELTYPE(hseq) != CV_32FC2 ) { CvMat tmp = cvMat( hull->rows, hull->cols, CV_32SC2, hull->data.ptr ); cvConvert( &tmp, hull ); } } else { CvSeqReader reader; cvStartReadSeq( hseq, &reader ); for( i = 0; i < hull_count; i++ ) { schar* ptr = reader.ptr; int idx; CV_NEXT_SEQ_ELEM( hseq->elem_size, reader ); if( hull1 ) idx = cvSeqElemIdx( ptseq, *(uchar**)ptr ); else idx = *(int*)ptr; if( idx < 0 || idx >= point_count ) { ts->printf( cvtest::TS::LOG, "Invalid convex hull point #%d\n", i ); code = cvtest::TS::FAIL_INVALID_OUTPUT; goto _exit_; } h[i] = p[idx]; } } // check that the convex hull is a convex polygon if( hull_count >= 3 ) { CvPoint2D32f pt0 = h[hull_count-1]; for( i = 0; i < hull_count; i++ ) { int j = i+1; CvPoint2D32f pt1 = h[i], pt2 = h[j < hull_count ? j : 0]; float dx0 = pt1.x - pt0.x, dy0 = pt1.y - pt0.y; float dx1 = pt2.x - pt1.x, dy1 = pt2.y - pt1.y; double t = (double)dx0*dy1 - (double)dx1*dy0; if( (t < 0) ^ (orientation != CV_COUNTER_CLOCKWISE) ) { ts->printf( cvtest::TS::LOG, "The convex hull is not convex or has a wrong orientation (vtx %d)\n", i ); code = cvtest::TS::FAIL_INVALID_OUTPUT; goto _exit_; } pt0 = pt1; } } // check that all the points are inside the hull or on the hull edge // and at least hull_point points are at the hull vertices for( i = 0; i < point_count; i++ ) { int idx = 0, on_edge = 0; double pptresult = cvTsPointPolygonTest( p[i], h, hull_count, &idx, &on_edge ); if( pptresult < 0 ) { ts->printf( cvtest::TS::LOG, "The point #%d is outside of the convex hull\n", i ); code = cvtest::TS::FAIL_BAD_ACCURACY; goto _exit_; } if( pptresult < FLT_EPSILON && !on_edge ) mask->data.ptr[idx] = (uchar)1; } if( cvtest::norm( _mask, Mat::zeros(_mask.dims, _mask.size, _mask.type()), NORM_L1 ) != hull_count ) { ts->printf( cvtest::TS::LOG, "Not every convex hull vertex coincides with some input point\n" ); code = cvtest::TS::FAIL_BAD_ACCURACY; goto _exit_; } _exit_: cvReleaseMat( &hull ); cvReleaseMat( &mask ); if( code < 0 ) ts->set_failed_test_info( code ); return code; } /****************************************************************************************\ * MinAreaRect Test * \****************************************************************************************/ class CV_MinAreaRectTest : public CV_BaseShapeDescrTest { public: CV_MinAreaRectTest(); protected: void run_func(void); int validate_test_results( int test_case_idx ); CvBox2D box; CvPoint2D32f box_pt[4]; }; CV_MinAreaRectTest::CV_MinAreaRectTest() { } void CV_MinAreaRectTest::run_func() { if(!test_cpp) { box = cvMinAreaRect2( points, storage ); cvBoxPoints( box, box_pt ); } else { cv::RotatedRect r = cv::minAreaRect(cv::cvarrToMat(points)); box = (CvBox2D)r; r.points((cv::Point2f*)box_pt); } } int CV_MinAreaRectTest::validate_test_results( int test_case_idx ) { double eps = 1e-1; int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx ); int i, j, point_count = points2->rows + points2->cols - 1; CvPoint2D32f *p = (CvPoint2D32f*)(points2->data.ptr); int mask[] = {0,0,0,0}; // check that the bounding box is a rotated rectangle: // 1. diagonals should be equal // 2. they must intersect in their middle points { double d0 = cvTsDist( box_pt[0], box_pt[2] ); double d1 = cvTsDist( box_pt[1], box_pt[3] ); double x0 = (box_pt[0].x + box_pt[2].x)*0.5; double y0 = (box_pt[0].y + box_pt[2].y)*0.5; double x1 = (box_pt[1].x + box_pt[3].x)*0.5; double y1 = (box_pt[1].y + box_pt[3].y)*0.5; if( fabs(d0 - d1) + fabs(x0 - x1) + fabs(y0 - y1) > eps*MAX(d0,d1) ) { ts->printf( cvtest::TS::LOG, "The bounding box is not a rectangle\n" ); code = cvtest::TS::FAIL_INVALID_OUTPUT; goto _exit_; } } #if 0 { int n = 4; double a = 8, c = 8, b = 100, d = 150; CvPoint bp[4], *bpp = bp; cvNamedWindow( "test", 1 ); IplImage* img = cvCreateImage( cvSize(500,500), 8, 3 ); cvZero(img); for( i = 0; i < point_count; i++ ) cvCircle(img,cvPoint(cvRound(p[i].x*a+b),cvRound(p[i].y*c+d)), 3, CV_RGB(0,255,0), -1 ); for( i = 0; i < n; i++ ) bp[i] = cvPoint(cvRound(box_pt[i].x*a+b),cvRound(box_pt[i].y*c+d)); cvPolyLine( img, &bpp, &n, 1, 1, CV_RGB(255,255,0), 1, CV_AA, 0 ); cvShowImage( "test", img ); cvWaitKey(); cvReleaseImage(&img); } #endif // check that the box includes all the points // and there is at least one point at (or very close to) every box side for( i = 0; i < point_count; i++ ) { int idx = 0, on_edge = 0; double pptresult = cvTsPointPolygonTest( p[i], box_pt, 4, &idx, &on_edge ); if( pptresult < -eps ) { ts->printf( cvtest::TS::LOG, "The point #%d is outside of the box\n", i ); code = cvtest::TS::FAIL_BAD_ACCURACY; goto _exit_; } if( pptresult < eps ) { for( j = 0; j < 4; j++ ) { double d = cvTsPtLineDist( p[i], box_pt[(j-1)&3], box_pt[j] ); if( d < eps ) mask[j] = (uchar)1; } } } if( mask[0] + mask[1] + mask[2] + mask[3] != 4 ) { ts->printf( cvtest::TS::LOG, "Not every box side has a point nearby\n" ); code = cvtest::TS::FAIL_BAD_ACCURACY; goto _exit_; } _exit_: if( code < 0 ) ts->set_failed_test_info( code ); return code; } /****************************************************************************************\ * MinEnclosingTriangle Test * \****************************************************************************************/ class CV_MinTriangleTest : public CV_BaseShapeDescrTest { public: CV_MinTriangleTest(); protected: void run_func(void); int validate_test_results( int test_case_idx ); std::vector getTriangleMiddlePoints(); std::vector convexPolygon; std::vector triangle; }; CV_MinTriangleTest::CV_MinTriangleTest() { } std::vector CV_MinTriangleTest::getTriangleMiddlePoints() { std::vector triangleMiddlePoints; for (int i = 0; i < 3; i++) { triangleMiddlePoints.push_back(cvTsMiddlePoint(triangle[i], triangle[(i + 1) % 3])); } return triangleMiddlePoints; } void CV_MinTriangleTest::run_func() { std::vector pointsAsVector; cv::cvarrToMat(points).convertTo(pointsAsVector, CV_32F); cv::minEnclosingTriangle(pointsAsVector, triangle); cv::convexHull(pointsAsVector, convexPolygon, true, true); } int CV_MinTriangleTest::validate_test_results( int test_case_idx ) { bool errorEnclosed = false, errorMiddlePoints = false, errorFlush = true; double eps = 1e-4; int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx ); #if 0 { int n = 3; double a = 8, c = 8, b = 100, d = 150; CvPoint bp[4], *bpp = bp; cvNamedWindow( "test", 1 ); IplImage* img = cvCreateImage( cvSize(500,500), 8, 3 ); cvZero(img); for( i = 0; i < point_count; i++ ) cvCircle(img,cvPoint(cvRound(p[i].x*a+b),cvRound(p[i].y*c+d)), 3, CV_RGB(0,255,0), -1 ); for( i = 0; i < n; i++ ) bp[i] = cvPoint(cvRound(triangle[i].x*a+b),cvRound(triangle[i].y*c+d)); cvPolyLine( img, &bpp, &n, 1, 1, CV_RGB(255,255,0), 1, CV_AA, 0 ); cvShowImage( "test", img ); cvWaitKey(); cvReleaseImage(&img); } #endif int polygonVertices = (int) convexPolygon.size(); if (polygonVertices > 2) { // Check if all points are enclosed by the triangle for (int i = 0; (i < polygonVertices) && (!errorEnclosed); i++) { if (cv::pointPolygonTest(triangle, cv::Point2f(convexPolygon[i].x, convexPolygon[i].y), true) < (-eps)) errorEnclosed = true; } // Check if triangle edges middle points touch the polygon std::vector middlePoints = getTriangleMiddlePoints(); for (int i = 0; (i < 3) && (!errorMiddlePoints); i++) { bool isTouching = false; for (int j = 0; (j < polygonVertices) && (!isTouching); j++) { if (cvTsIsPointOnLineSegment(middlePoints[i], convexPolygon[j], convexPolygon[(j + 1) % polygonVertices])) isTouching = true; } errorMiddlePoints = (isTouching) ? false : true; } // Check if at least one of the edges is flush for (int i = 0; (i < 3) && (errorFlush); i++) { for (int j = 0; (j < polygonVertices) && (errorFlush); j++) { if ((cvTsIsPointOnLineSegment(convexPolygon[j], triangle[i], triangle[(i + 1) % 3])) && (cvTsIsPointOnLineSegment(convexPolygon[(j + 1) % polygonVertices], triangle[i], triangle[(i + 1) % 3]))) errorFlush = false; } } // Report any found errors if (errorEnclosed) { ts->printf( cvtest::TS::LOG, "All points should be enclosed by the triangle.\n" ); code = cvtest::TS::FAIL_BAD_ACCURACY; } else if (errorMiddlePoints) { ts->printf( cvtest::TS::LOG, "All triangle edges middle points should touch the convex hull of the points.\n" ); code = cvtest::TS::FAIL_INVALID_OUTPUT; } else if (errorFlush) { ts->printf( cvtest::TS::LOG, "At least one edge of the enclosing triangle should be flush with one edge of the polygon.\n" ); code = cvtest::TS::FAIL_INVALID_OUTPUT; } } if ( code < 0 ) ts->set_failed_test_info( code ); return code; } /****************************************************************************************\ * MinEnclosingCircle Test * \****************************************************************************************/ class CV_MinCircleTest : public CV_BaseShapeDescrTest { public: CV_MinCircleTest(); protected: void run_func(void); int validate_test_results( int test_case_idx ); CvPoint2D32f center; float radius; }; CV_MinCircleTest::CV_MinCircleTest() { } void CV_MinCircleTest::run_func() { if(!test_cpp) cvMinEnclosingCircle( points, ¢er, &radius ); else { cv::Point2f tmpcenter; cv::minEnclosingCircle(cv::cvarrToMat(points), tmpcenter, radius); center = tmpcenter; } } int CV_MinCircleTest::validate_test_results( int test_case_idx ) { double eps = 1.03; int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx ); int i, j = 0, point_count = points2->rows + points2->cols - 1; CvPoint2D32f *p = (CvPoint2D32f*)(points2->data.ptr); CvPoint2D32f v[3]; #if 0 { double a = 2, b = 200, d = 400; cvNamedWindow( "test", 1 ); IplImage* img = cvCreateImage( cvSize(500,500), 8, 3 ); cvZero(img); for( i = 0; i < point_count; i++ ) cvCircle(img,cvPoint(cvRound(p[i].x*a+b),cvRound(p[i].y*a+d)), 3, CV_RGB(0,255,0), -1 ); cvCircle( img, cvPoint(cvRound(center.x*a+b),cvRound(center.y*a+d)), cvRound(radius*a), CV_RGB(255,255,0), 1 ); cvShowImage( "test", img ); cvWaitKey(); cvReleaseImage(&img); } #endif // check that the circle contains all the points inside and // remember at most 3 points that are close to the boundary for( i = 0; i < point_count; i++ ) { double d = cvTsDist( p[i], center ); if( d > radius ) { ts->printf( cvtest::TS::LOG, "The point #%d is outside of the circle\n", i ); code = cvtest::TS::FAIL_BAD_ACCURACY; goto _exit_; } if( radius - d < eps*radius && j < 3 ) v[j++] = p[i]; } if( point_count >= 2 && (j < 2 || (j == 2 && cvTsDist(v[0],v[1]) < (radius-1)*2/eps)) ) { ts->printf( cvtest::TS::LOG, "There should be at at least 3 points near the circle boundary or 2 points on the diameter\n" ); code = cvtest::TS::FAIL_BAD_ACCURACY; goto _exit_; } _exit_: if( code < 0 ) ts->set_failed_test_info( code ); return code; } /****************************************************************************************\ * Perimeter Test * \****************************************************************************************/ class CV_PerimeterTest : public CV_BaseShapeDescrTest { public: CV_PerimeterTest(); protected: int prepare_test_case( int test_case_idx ); void run_func(void); int validate_test_results( int test_case_idx ); CvSlice slice; int is_closed; double result; }; CV_PerimeterTest::CV_PerimeterTest() { } int CV_PerimeterTest::prepare_test_case( int test_case_idx ) { int code = CV_BaseShapeDescrTest::prepare_test_case( test_case_idx ); RNG& rng = ts->get_rng(); int total; if( code < 0 ) return code; is_closed = cvtest::randInt(rng) % 2; if( points1 ) { points1->flags |= CV_SEQ_KIND_CURVE; if( is_closed ) points1->flags |= CV_SEQ_FLAG_CLOSED; total = points1->total; } else total = points2->cols + points2->rows - 1; if( (cvtest::randInt(rng) % 3) && !test_cpp ) { slice.start_index = cvtest::randInt(rng) % total; slice.end_index = cvtest::randInt(rng) % total; } else slice = CV_WHOLE_SEQ; return 1; } void CV_PerimeterTest::run_func() { if(!test_cpp) result = cvArcLength( points, slice, points1 ? -1 : is_closed ); else result = cv::arcLength(cv::cvarrToMat(points), !points1 ? is_closed != 0 : (points1->flags & CV_SEQ_FLAG_CLOSED) != 0); } int CV_PerimeterTest::validate_test_results( int test_case_idx ) { int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx ); int i, len = slice.end_index - slice.start_index, total = points2->cols + points2->rows - 1; double result0 = 0; CvPoint2D32f prev_pt, pt, *ptr; if( len < 0 ) len += total; len = MIN( len, total ); //len -= !is_closed && len == total; ptr = (CvPoint2D32f*)points2->data.fl; prev_pt = ptr[(is_closed ? slice.start_index+len-1 : slice.start_index) % total]; for( i = 0; i < len + (len < total && (!is_closed || len==1)); i++ ) { pt = ptr[(i + slice.start_index) % total]; double dx = pt.x - prev_pt.x, dy = pt.y - prev_pt.y; result0 += sqrt(dx*dx + dy*dy); prev_pt = pt; } if( cvIsNaN(result) || cvIsInf(result) ) { ts->printf( cvtest::TS::LOG, "cvArcLength() returned invalid value (%g)\n", result ); code = cvtest::TS::FAIL_INVALID_OUTPUT; } else if( fabs(result - result0) > FLT_EPSILON*100*result0 ) { ts->printf( cvtest::TS::LOG, "The function returned %g, while the correct result is %g\n", result, result0 ); code = cvtest::TS::FAIL_BAD_ACCURACY; } if( code < 0 ) ts->set_failed_test_info( code ); return code; } /****************************************************************************************\ * FitEllipse Test * \****************************************************************************************/ class CV_FitEllipseTest : public CV_BaseShapeDescrTest { public: CV_FitEllipseTest(); protected: int prepare_test_case( int test_case_idx ); void generate_point_set( void* points ); void run_func(void); int validate_test_results( int test_case_idx ); CvBox2D box0, box; double min_ellipse_size, max_noise; }; CV_FitEllipseTest::CV_FitEllipseTest() { min_log_size = 5; // for robust ellipse fitting a dozen of points is needed at least max_log_size = 10; min_ellipse_size = 10; max_noise = 0.05; } void CV_FitEllipseTest::generate_point_set( void* pointsSet ) { RNG& rng = ts->get_rng(); int i, total, point_type; CvSeqReader reader; uchar* data = 0; double a, b; box0.center.x = (float)((low.val[0] + high.val[0])*0.5); box0.center.y = (float)((low.val[1] + high.val[1])*0.5); box0.size.width = (float)(MAX(high.val[0] - low.val[0], min_ellipse_size)*2); box0.size.height = (float)(MAX(high.val[1] - low.val[1], min_ellipse_size)*2); box0.angle = (float)(cvtest::randReal(rng)*180); a = cos(box0.angle*CV_PI/180.); b = sin(box0.angle*CV_PI/180.); if( box0.size.width > box0.size.height ) { float t; CV_SWAP( box0.size.width, box0.size.height, t ); } memset( &reader, 0, sizeof(reader) ); if( CV_IS_SEQ(pointsSet) ) { CvSeq* ptseq = (CvSeq*)pointsSet; total = ptseq->total; point_type = CV_SEQ_ELTYPE(ptseq); cvStartReadSeq( ptseq, &reader ); } else { CvMat* ptm = (CvMat*)pointsSet; assert( CV_IS_MAT(ptm) && CV_IS_MAT_CONT(ptm->type) ); total = ptm->rows + ptm->cols - 1; point_type = CV_MAT_TYPE(ptm->type); data = ptm->data.ptr; } assert( point_type == CV_32SC2 || point_type == CV_32FC2 ); for( i = 0; i < total; i++ ) { CvPoint* pp; CvPoint2D32f p; double angle = cvtest::randReal(rng)*CV_PI*2; double x = box0.size.height*0.5*(cos(angle) + (cvtest::randReal(rng)-0.5)*2*max_noise); double y = box0.size.width*0.5*(sin(angle) + (cvtest::randReal(rng)-0.5)*2*max_noise); p.x = (float)(box0.center.x + a*x + b*y); p.y = (float)(box0.center.y - b*x + a*y); if( reader.ptr ) { pp = (CvPoint*)reader.ptr; CV_NEXT_SEQ_ELEM( sizeof(*pp), reader ); } else pp = ((CvPoint*)data) + i; if( point_type == CV_32SC2 ) { pp->x = cvRound(p.x); pp->y = cvRound(p.y); } else *(CvPoint2D32f*)pp = p; } } int CV_FitEllipseTest::prepare_test_case( int test_case_idx ) { min_log_size = MAX(min_log_size,4); max_log_size = MAX(min_log_size,max_log_size); return CV_BaseShapeDescrTest::prepare_test_case( test_case_idx ); } void CV_FitEllipseTest::run_func() { if(!test_cpp) box = cvFitEllipse2( points ); else box = (CvBox2D)cv::fitEllipse(cv::cvarrToMat(points)); } int CV_FitEllipseTest::validate_test_results( int test_case_idx ) { int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx ); double diff_angle; if( cvIsNaN(box.center.x) || cvIsInf(box.center.x) || cvIsNaN(box.center.y) || cvIsInf(box.center.y) || cvIsNaN(box.size.width) || cvIsInf(box.size.width) || cvIsNaN(box.size.height) || cvIsInf(box.size.height) || cvIsNaN(box.angle) || cvIsInf(box.angle) ) { ts->printf( cvtest::TS::LOG, "Some of the computed ellipse parameters are invalid (x=%g,y=%g,w=%g,h=%g,angle=%g)\n", box.center.x, box.center.y, box.size.width, box.size.height, box.angle ); code = cvtest::TS::FAIL_INVALID_OUTPUT; goto _exit_; } box.angle = (float)(90-box.angle); if( box.angle < 0 ) box.angle += 360; if( box.angle > 360 ) box.angle -= 360; if( fabs(box.center.x - box0.center.x) > 3 || fabs(box.center.y - box0.center.y) > 3 || fabs(box.size.width - box0.size.width) > 0.1*fabs(box0.size.width) || fabs(box.size.height - box0.size.height) > 0.1*fabs(box0.size.height) ) { ts->printf( cvtest::TS::LOG, "The computed ellipse center and/or size are incorrect:\n\t" "(x=%.1f,y=%.1f,w=%.1f,h=%.1f), while it should be (x=%.1f,y=%.1f,w=%.1f,h=%.1f)\n", box.center.x, box.center.y, box.size.width, box.size.height, box0.center.x, box0.center.y, box0.size.width, box0.size.height ); code = cvtest::TS::FAIL_BAD_ACCURACY; goto _exit_; } diff_angle = fabs(box0.angle - box.angle); diff_angle = MIN( diff_angle, fabs(diff_angle - 360)); diff_angle = MIN( diff_angle, fabs(diff_angle - 180)); if( box0.size.height >= 1.3*box0.size.width && diff_angle > 30 ) { ts->printf( cvtest::TS::LOG, "Incorrect ellipse angle (=%1.f, should be %1.f)\n", box.angle, box0.angle ); code = cvtest::TS::FAIL_BAD_ACCURACY; goto _exit_; } _exit_: #if 0 if( code < 0 ) { cvNamedWindow( "test", 0 ); IplImage* img = cvCreateImage( cvSize(cvRound(low_high_range*4), cvRound(low_high_range*4)), 8, 3 ); cvZero( img ); box.center.x += (float)low_high_range*2; box.center.y += (float)low_high_range*2; cvEllipseBox( img, box, CV_RGB(255,0,0), 3, 8 ); for( int i = 0; i < points2->rows + points2->cols - 1; i++ ) { CvPoint pt; pt.x = cvRound(points2->data.fl[i*2] + low_high_range*2); pt.y = cvRound(points2->data.fl[i*2+1] + low_high_range*2); cvCircle( img, pt, 1, CV_RGB(255,255,255), -1, 8 ); } cvShowImage( "test", img ); cvReleaseImage( &img ); cvWaitKey(0); } #endif if( code < 0 ) { ts->set_failed_test_info( code ); } return code; } class CV_FitEllipseSmallTest : public cvtest::BaseTest { public: CV_FitEllipseSmallTest() {} ~CV_FitEllipseSmallTest() {} protected: void run(int) { Size sz(50, 50); vector > c; c.push_back(vector()); int scale = 1; Point ofs = Point(0,0);//sz.width/2, sz.height/2) - Point(4,4)*scale; c[0].push_back(Point(2, 0)*scale+ofs); c[0].push_back(Point(0, 2)*scale+ofs); c[0].push_back(Point(0, 6)*scale+ofs); c[0].push_back(Point(2, 8)*scale+ofs); c[0].push_back(Point(6, 8)*scale+ofs); c[0].push_back(Point(8, 6)*scale+ofs); c[0].push_back(Point(8, 2)*scale+ofs); c[0].push_back(Point(6, 0)*scale+ofs); RotatedRect e = fitEllipse(c[0]); CV_Assert( fabs(e.center.x - 4) <= 1. && fabs(e.center.y - 4) <= 1. && fabs(e.size.width - 9) <= 1. && fabs(e.size.height - 9) <= 1. ); } }; /****************************************************************************************\ * FitLine Test * \****************************************************************************************/ class CV_FitLineTest : public CV_BaseShapeDescrTest { public: CV_FitLineTest(); protected: int prepare_test_case( int test_case_idx ); void generate_point_set( void* points ); void run_func(void); int validate_test_results( int test_case_idx ); double max_noise; float line[6], line0[6]; int dist_type; double reps, aeps; }; CV_FitLineTest::CV_FitLineTest() { min_log_size = 5; // for robust ellipse fitting a dozen of points is needed at least max_log_size = 10; max_noise = 0.05; } #if defined(__GNUC__) && (__GNUC__ == 4) && (__GNUC_MINOR__ == 8) # pragma GCC diagnostic push # pragma GCC diagnostic ignored "-Warray-bounds" #endif void CV_FitLineTest::generate_point_set( void* pointsSet ) { RNG& rng = ts->get_rng(); int i, k, n, total, point_type; CvSeqReader reader; uchar* data = 0; double s = 0; n = dims; for( k = 0; k < n; k++ ) { line0[k+n] = (float)((low.val[k] + high.val[k])*0.5); line0[k] = (float)(high.val[k] - low.val[k]); if( cvtest::randInt(rng) % 2 ) line0[k] = -line0[k]; s += (double)line0[k]*line0[k]; } s = 1./sqrt(s); for( k = 0; k < n; k++ ) line0[k] = (float)(line0[k]*s); memset( &reader, 0, sizeof(reader) ); if( CV_IS_SEQ(pointsSet) ) { CvSeq* ptseq = (CvSeq*)pointsSet; total = ptseq->total; point_type = CV_MAT_DEPTH(CV_SEQ_ELTYPE(ptseq)); cvStartReadSeq( ptseq, &reader ); } else { CvMat* ptm = (CvMat*)pointsSet; assert( CV_IS_MAT(ptm) && CV_IS_MAT_CONT(ptm->type) ); total = ptm->rows + ptm->cols - 1; point_type = CV_MAT_DEPTH(CV_MAT_TYPE(ptm->type)); data = ptm->data.ptr; } for( i = 0; i < total; i++ ) { int* pi; float* pf; float p[4], t; if( reader.ptr ) { pi = (int*)reader.ptr; pf = (float*)reader.ptr; CV_NEXT_SEQ_ELEM( reader.seq->elem_size, reader ); } else { pi = (int*)data + i*n; pf = (float*)data + i*n; } t = (float)((cvtest::randReal(rng)-0.5)*low_high_range*2); for( k = 0; k < n; k++ ) { p[k] = (float)((cvtest::randReal(rng)-0.5)*max_noise*2 + t*line0[k] + line0[k+n]); if( point_type == CV_32S ) pi[k] = cvRound(p[k]); else pf[k] = p[k]; } } } #if defined(__GNUC__) && (__GNUC__ == 4) && (__GNUC_MINOR__ == 8) # pragma GCC diagnostic pop #endif int CV_FitLineTest::prepare_test_case( int test_case_idx ) { RNG& rng = ts->get_rng(); dims = cvtest::randInt(rng) % 2 + 2; min_log_size = MAX(min_log_size,5); max_log_size = MAX(min_log_size,max_log_size); int code = CV_BaseShapeDescrTest::prepare_test_case( test_case_idx ); dist_type = cvtest::randInt(rng) % 6 + 1; dist_type += dist_type == CV_DIST_C; reps = 0.1; aeps = 0.01; return code; } void CV_FitLineTest::run_func() { if(!test_cpp) cvFitLine( points, dist_type, 0, reps, aeps, line ); else if(dims == 2) cv::fitLine(cv::cvarrToMat(points), (cv::Vec4f&)line[0], dist_type, 0, reps, aeps); else cv::fitLine(cv::cvarrToMat(points), (cv::Vec6f&)line[0], dist_type, 0, reps, aeps); } #if defined(__GNUC__) && (__GNUC__ == 4) && (__GNUC_MINOR__ == 8) # pragma GCC diagnostic push # pragma GCC diagnostic ignored "-Warray-bounds" #endif int CV_FitLineTest::validate_test_results( int test_case_idx ) { int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx ); int k, max_k = 0; double vec_diff = 0, t; for( k = 0; k < dims*2; k++ ) { if( cvIsNaN(line[k]) || cvIsInf(line[k]) ) { ts->printf( cvtest::TS::LOG, "Some of the computed line parameters are invalid (line[%d]=%g)\n", k, line[k] ); code = cvtest::TS::FAIL_INVALID_OUTPUT; goto _exit_; } } if( fabs(line0[1]) > fabs(line0[0]) ) max_k = 1; if( fabs(line0[dims-1]) > fabs(line0[max_k]) ) max_k = dims-1; if( line0[max_k] < 0 ) for( k = 0; k < dims; k++ ) line0[k] = -line0[k]; if( line[max_k] < 0 ) for( k = 0; k < dims; k++ ) line[k] = -line[k]; for( k = 0; k < dims; k++ ) { double dt = line[k] - line0[k]; vec_diff += dt*dt; } if( sqrt(vec_diff) > 0.05 ) { if( dims == 2 ) ts->printf( cvtest::TS::LOG, "The computed line vector (%.2f,%.2f) is different from the actual (%.2f,%.2f)\n", line[0], line[1], line0[0], line0[1] ); else ts->printf( cvtest::TS::LOG, "The computed line vector (%.2f,%.2f,%.2f) is different from the actual (%.2f,%.2f,%.2f)\n", line[0], line[1], line[2], line0[0], line0[1], line0[2] ); code = cvtest::TS::FAIL_BAD_ACCURACY; goto _exit_; } t = (line[max_k+dims] - line0[max_k+dims])/line0[max_k]; for( k = 0; k < dims; k++ ) { double p = line0[k+dims] + t*line0[k] - line[k+dims]; vec_diff += p*p; } if( sqrt(vec_diff) > 1*MAX(fabs(t),1) ) { if( dims == 2 ) ts->printf( cvtest::TS::LOG, "The computed line point (%.2f,%.2f) is too far from the actual line\n", line[2]+line0[2], line[3]+line0[3] ); else ts->printf( cvtest::TS::LOG, "The computed line point (%.2f,%.2f,%.2f) is too far from the actual line\n", line[3]+line0[3], line[4]+line0[4], line[5]+line0[5] ); code = cvtest::TS::FAIL_BAD_ACCURACY; goto _exit_; } _exit_: if( code < 0 ) { ts->set_failed_test_info( code ); } return code; } #if defined(__GNUC__) && (__GNUC__ == 4) && (__GNUC_MINOR__ == 8) # pragma GCC diagnostic pop #endif /****************************************************************************************\ * ContourMoments Test * \****************************************************************************************/ static void cvTsGenerateTousledBlob( CvPoint2D32f center, CvSize2D32f axes, double max_r_scale, double angle, CvArr* points, RNG& rng ) { int i, total, point_type; uchar* data = 0; CvSeqReader reader; memset( &reader, 0, sizeof(reader) ); if( CV_IS_SEQ(points) ) { CvSeq* ptseq = (CvSeq*)points; total = ptseq->total; point_type = CV_SEQ_ELTYPE(ptseq); cvStartReadSeq( ptseq, &reader ); } else { CvMat* ptm = (CvMat*)points; assert( CV_IS_MAT(ptm) && CV_IS_MAT_CONT(ptm->type) ); total = ptm->rows + ptm->cols - 1; point_type = CV_MAT_TYPE(ptm->type); data = ptm->data.ptr; } assert( point_type == CV_32SC2 || point_type == CV_32FC2 ); for( i = 0; i < total; i++ ) { CvPoint* pp; CvPoint2D32f p; double phi0 = 2*CV_PI*i/total; double phi = CV_PI*angle/180.; double t = cvtest::randReal(rng)*max_r_scale + (1 - max_r_scale); double ta = axes.height*t; double tb = axes.width*t; double c0 = cos(phi0)*ta, s0 = sin(phi0)*tb; double c = cos(phi), s = sin(phi); p.x = (float)(c0*c - s0*s + center.x); p.y = (float)(c0*s + s0*c + center.y); if( reader.ptr ) { pp = (CvPoint*)reader.ptr; CV_NEXT_SEQ_ELEM( sizeof(*pp), reader ); } else pp = ((CvPoint*)data) + i; if( point_type == CV_32SC2 ) { pp->x = cvRound(p.x); pp->y = cvRound(p.y); } else *(CvPoint2D32f*)pp = p; } } class CV_ContourMomentsTest : public CV_BaseShapeDescrTest { public: CV_ContourMomentsTest(); protected: int prepare_test_case( int test_case_idx ); void generate_point_set( void* points ); void run_func(void); int validate_test_results( int test_case_idx ); CvMoments moments0, moments; double area0, area; CvSize2D32f axes; CvPoint2D32f center; int max_max_r_scale; double max_r_scale, angle; CvSize img_size; }; CV_ContourMomentsTest::CV_ContourMomentsTest() { min_log_size = 3; max_log_size = 8; max_max_r_scale = 15; low_high_range = 200; enable_flt_points = false; } void CV_ContourMomentsTest::generate_point_set( void* pointsSet ) { RNG& rng = ts->get_rng(); float max_sz; axes.width = (float)((cvtest::randReal(rng)*0.9 + 0.1)*low_high_range); axes.height = (float)((cvtest::randReal(rng)*0.9 + 0.1)*low_high_range); max_sz = MAX(axes.width, axes.height); img_size.width = img_size.height = cvRound(low_high_range*2.2); center.x = (float)(img_size.width*0.5 + (cvtest::randReal(rng)-0.5)*(img_size.width - max_sz*2)*0.8); center.y = (float)(img_size.height*0.5 + (cvtest::randReal(rng)-0.5)*(img_size.height - max_sz*2)*0.8); assert( 0 < center.x - max_sz && center.x + max_sz < img_size.width && 0 < center.y - max_sz && center.y + max_sz < img_size.height ); max_r_scale = cvtest::randReal(rng)*max_max_r_scale*0.01; angle = cvtest::randReal(rng)*360; cvTsGenerateTousledBlob( center, axes, max_r_scale, angle, pointsSet, rng ); if( points1 ) points1->flags = CV_SEQ_MAGIC_VAL + CV_SEQ_POLYGON; } int CV_ContourMomentsTest::prepare_test_case( int test_case_idx ) { min_log_size = MAX(min_log_size,3); max_log_size = MIN(max_log_size,8); max_log_size = MAX(min_log_size,max_log_size); int code = CV_BaseShapeDescrTest::prepare_test_case( test_case_idx ); return code; } void CV_ContourMomentsTest::run_func() { if(!test_cpp) { cvMoments( points, &moments ); area = cvContourArea( points ); } else { moments = (CvMoments)cv::moments(cv::cvarrToMat(points)); area = cv::contourArea(cv::cvarrToMat(points)); } } int CV_ContourMomentsTest::validate_test_results( int test_case_idx ) { int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx ); int i, n = (int)(sizeof(moments)/sizeof(moments.inv_sqrt_m00)); CvMat* img = cvCreateMat( img_size.height, img_size.width, CV_8UC1 ); CvPoint* pt = (CvPoint*)points2->data.i; int count = points2->cols + points2->rows - 1; double max_v0 = 0; cvZero(img); cvFillPoly( img, &pt, &count, 1, cvScalarAll(1)); cvMoments( img, &moments0 ); for( i = 0; i < n; i++ ) { double t = fabs((&moments0.m00)[i]); max_v0 = MAX(max_v0, t); } for( i = 0; i <= n; i++ ) { double v = i < n ? (&moments.m00)[i] : area; double v0 = i < n ? (&moments0.m00)[i] : moments0.m00; if( cvIsNaN(v) || cvIsInf(v) ) { ts->printf( cvtest::TS::LOG, "The contour %s is invalid (=%g)\n", i < n ? "moment" : "area", v ); code = cvtest::TS::FAIL_INVALID_OUTPUT; break; } if( fabs(v - v0) > 0.1*max_v0 ) { ts->printf( cvtest::TS::LOG, "The computed contour %s is %g, while it should be %g\n", i < n ? "moment" : "area", v, v0 ); code = cvtest::TS::FAIL_BAD_ACCURACY; break; } } if( code < 0 ) { #if 0 cvCmpS( img, 0, img, CV_CMP_GT ); cvNamedWindow( "test", 1 ); cvShowImage( "test", img ); cvWaitKey(); #endif ts->set_failed_test_info( code ); } cvReleaseMat( &img ); return code; } ////////////////////////////////////// Perimeter/Area/Slice test /////////////////////////////////// class CV_PerimeterAreaSliceTest : public cvtest::BaseTest { public: CV_PerimeterAreaSliceTest(); ~CV_PerimeterAreaSliceTest(); protected: void run(int); }; CV_PerimeterAreaSliceTest::CV_PerimeterAreaSliceTest() { } CV_PerimeterAreaSliceTest::~CV_PerimeterAreaSliceTest() {} void CV_PerimeterAreaSliceTest::run( int ) { Ptr storage(cvCreateMemStorage()); RNG& rng = theRNG(); const double min_r = 90, max_r = 120; for( int i = 0; i < 100; i++ ) { ts->update_context( this, i, true ); int n = rng.uniform(3, 30); cvClearMemStorage(storage); CvSeq* contour = cvCreateSeq(CV_SEQ_POLYGON, sizeof(CvSeq), sizeof(CvPoint), storage); double dphi = CV_PI*2/n; CvPoint center; center.x = rng.uniform(cvCeil(max_r), cvFloor(640-max_r)); center.y = rng.uniform(cvCeil(max_r), cvFloor(480-max_r)); for( int j = 0; j < n; j++ ) { CvPoint pt; double r = rng.uniform(min_r, max_r); double phi = j*dphi; pt.x = cvRound(center.x + r*cos(phi)); pt.y = cvRound(center.y - r*sin(phi)); cvSeqPush(contour, &pt); } CvSlice slice; for(;;) { slice.start_index = rng.uniform(-n/2, 3*n/2); slice.end_index = rng.uniform(-n/2, 3*n/2); int len = cvSliceLength(slice, contour); if( len > 2 ) break; } CvSeq *cslice = cvSeqSlice(contour, slice); /*printf( "%d. (%d, %d) of %d, length = %d, length1 = %d\n", i, slice.start_index, slice.end_index, contour->total, cvSliceLength(slice, contour), cslice->total ); double area0 = cvContourArea(cslice); double area1 = cvContourArea(contour, slice); if( area0 != area1 ) { ts->printf(cvtest::TS::LOG, "The contour area slice is computed differently (%g vs %g)\n", area0, area1 ); ts->set_failed_test_info( cvtest::TS::FAIL_BAD_ACCURACY ); return; }*/ double len0 = cvArcLength(cslice, CV_WHOLE_SEQ, 1); double len1 = cvArcLength(contour, slice, 1); if( len0 != len1 ) { ts->printf(cvtest::TS::LOG, "The contour arc length is computed differently (%g vs %g)\n", len0, len1 ); ts->set_failed_test_info( cvtest::TS::FAIL_BAD_ACCURACY ); return; } } ts->set_failed_test_info(cvtest::TS::OK); } TEST(Imgproc_ConvexHull, accuracy) { CV_ConvHullTest test; test.safe_run(); } TEST(Imgproc_MinAreaRect, accuracy) { CV_MinAreaRectTest test; test.safe_run(); } TEST(Imgproc_MinTriangle, accuracy) { CV_MinTriangleTest test; test.safe_run(); } TEST(Imgproc_MinCircle, accuracy) { CV_MinCircleTest test; test.safe_run(); } TEST(Imgproc_ContourPerimeter, accuracy) { CV_PerimeterTest test; test.safe_run(); } TEST(Imgproc_FitEllipse, accuracy) { CV_FitEllipseTest test; test.safe_run(); } TEST(Imgproc_FitLine, accuracy) { CV_FitLineTest test; test.safe_run(); } TEST(Imgproc_ContourMoments, accuracy) { CV_ContourMomentsTest test; test.safe_run(); } TEST(Imgproc_ContourPerimeterSlice, accuracy) { CV_PerimeterAreaSliceTest test; test.safe_run(); } TEST(Imgproc_FitEllipse, small) { CV_FitEllipseSmallTest test; test.safe_run(); } /* End of file. */