mirror/opencv
1
0
Fork 0
mirror of https://github.com/opencv/opencv.git synced 2024-12-13 16:09:23 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity
37580687e6
opencv/modules/imgproc/test/test_convhull.cpp
Roman Donchenko 48432502b6 Merge remote-tracking branch 'origin/2.4' into merge-2.4 
Conflicts:
	cmake/OpenCVDetectCUDA.cmake
	doc/tutorials/introduction/linux_gcc_cmake/linux_gcc_cmake.rst
	modules/core/CMakeLists.txt
	modules/features2d/perf/opencl/perf_brute_force_matcher.cpp
	modules/highgui/src/grfmt_tiff.cpp
	modules/imgproc/src/clahe.cpp
	modules/imgproc/src/moments.cpp
	modules/nonfree/CMakeLists.txt
	modules/ocl/perf/perf_ml.cpp
	modules/superres/CMakeLists.txt
2014-02-25 15:02:24 +04:00

1873 lines
54 KiB
C++
Raw Blame History

/*M///////////////////////////////////////////////////////////////////////////////////////
//
// IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
//
// By downloading, copying, installing or using the software you agree to this license.
// If you do not agree to this license, do not download, install,
// copy or use the software.
//
//
// Intel License Agreement
// For Open Source Computer Vision Library
//
// Copyright (C) 2000, Intel Corporation, all rights reserved.
// Third party copyrights are property of their respective owners.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//
// * Redistribution's of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// * Redistribution's in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
//
// * The name of Intel Corporation may not be used to endorse or promote products
// derived from this software without specific prior written permission.
//
// This software is provided by the copyright holders and contributors "as is" and
// any express or implied warranties, including, but not limited to, the implied
// warranties of merchantability and fitness for a particular purpose are disclaimed.
// In no event shall the Intel Corporation or contributors be liable for any direct,
// indirect, incidental, special, exemplary, or consequential damages
// (including, but not limited to, procurement of substitute goods or services;
// loss of use, data, or profits; or business interruption) however caused
// and on any theory of liability, whether in contract, strict liability,
// or tort (including negligence or otherwise) arising in any way out of
// the use of this software, even if advised of the possibility of such damage.
//
//M*/
#include "test_precomp.hpp"
using namespace cv;
using namespace std;
/*static int
cvTsPointConvexPolygon( CvPoint2D32f pt, CvPoint2D32f* v, int n )
{
CvPoint2D32f v0 = v[n-1];
int i, sign = 0;
for( i = 0; i < n; i++ )
{
CvPoint2D32f v1 = v[i];
float dx = pt.x - v0.x, dy = pt.y - v0.y;
float dx1 = v1.x - v0.x, dy1 = v1.y - v0.y;
double t = (double)dx*dy1 - (double)dx1*dy;
if( fabs(t) > DBL_EPSILON )
{
if( t*sign < 0 )
break;
if( sign == 0 )
sign = t < 0 ? -1 : 1;
}
else if( fabs(dx) + fabs(dy) < DBL_EPSILON )
return i+1;
v0 = v1;
}
return i < n ? -1 : 0;
}*/
CV_INLINE double
cvTsDist( CvPoint2D32f a, CvPoint2D32f b )
{
double dx = a.x - b.x;
double dy = a.y - b.y;
return sqrt(dx*dx + dy*dy);
}
CV_INLINE double
cvTsPtLineDist( CvPoint2D32f pt, CvPoint2D32f a, CvPoint2D32f b )
{
double d0 = cvTsDist( pt, a ), d1;
double dd = cvTsDist( a, b );
if( dd < FLT_EPSILON )
return d0;
d1 = cvTsDist( pt, b );
dd = fabs((double)(pt.x - a.x)*(b.y - a.y) - (double)(pt.y - a.y)*(b.x - a.x))/dd;
d0 = MIN( d0, d1 );
return MIN( d0, dd );
}
static double
cvTsPointPolygonTest( CvPoint2D32f pt, const CvPoint2D32f* vv, int n, int* _idx=0, int* _on_edge=0 )
{
int i;
CvPoint2D32f v = vv[n-1], v0;
double min_dist_num = FLT_MAX, min_dist_denom = 1;
int min_dist_idx = -1, min_on_edge = 0;
int counter = 0;
double result;
for( i = 0; i < n; i++ )
{
double dx, dy, dx1, dy1, dx2, dy2, dist_num, dist_denom = 1;
int on_edge = 0, idx = i;
v0 = v; v = vv[i];
dx = v.x - v0.x; dy = v.y - v0.y;
dx1 = pt.x - v0.x; dy1 = pt.y - v0.y;
dx2 = pt.x - v.x; dy2 = pt.y - v.y;
if( dx2*dx + dy2*dy >= 0 )
dist_num = dx2*dx2 + dy2*dy2;
else if( dx1*dx + dy1*dy <= 0 )
{
dist_num = dx1*dx1 + dy1*dy1;
idx = i - 1;
if( idx < 0 ) idx = n-1;
}
else
{
dist_num = (dy1*dx - dx1*dy);
dist_num *= dist_num;
dist_denom = dx*dx + dy*dy;
on_edge = 1;
}
if( dist_num*min_dist_denom < min_dist_num*dist_denom )
{
min_dist_num = dist_num;
min_dist_denom = dist_denom;
min_dist_idx = idx;
min_on_edge = on_edge;
if( min_dist_num == 0 )
break;
}
if( (v0.y <= pt.y && v.y <= pt.y) ||
(v0.y > pt.y && v.y > pt.y) ||
(v0.x < pt.x && v.x < pt.x) )
continue;
dist_num = dy1*dx - dx1*dy;
if( dy < 0 )
dist_num = -dist_num;
counter += dist_num > 0;
}
result = sqrt(min_dist_num/min_dist_denom);
if( counter % 2 == 0 )
result = -result;
if( _idx )
*_idx = min_dist_idx;
if( _on_edge )
*_on_edge = min_on_edge;
return result;
}
static cv::Point2f
cvTsMiddlePoint(const cv::Point2f &a, const cv::Point2f &b)
{
return cv::Point2f((a.x + b.x) / 2, (a.y + b.y) / 2);
}
static bool
cvTsIsPointOnLineSegment(const cv::Point2f &x, const cv::Point2f &a, const cv::Point2f &b)
{
double d1 = cvTsDist(CvPoint2D32f(x.x, x.y), CvPoint2D32f(a.x, a.y));
double d2 = cvTsDist(CvPoint2D32f(x.x, x.y), CvPoint2D32f(b.x, b.y));
double d3 = cvTsDist(CvPoint2D32f(a.x, a.y), CvPoint2D32f(b.x, b.y));
return (abs(d1 + d2 - d3) <= (1E-5));
}
/****************************************************************************************\
* Base class for shape descriptor tests *
\****************************************************************************************/
class CV_BaseShapeDescrTest : public cvtest::BaseTest
{
public:
CV_BaseShapeDescrTest();
virtual ~CV_BaseShapeDescrTest();
void clear();
protected:
int read_params( CvFileStorage* fs );
void run_func(void);
int prepare_test_case( int test_case_idx );
int validate_test_results( int test_case_idx );
virtual void generate_point_set( void* points );
virtual void extract_points();
int min_log_size;
int max_log_size;
int dims;
bool enable_flt_points;
CvMemStorage* storage;
CvSeq* points1;
CvMat* points2;
void* points;
void* result;
double low_high_range;
CvScalar low, high;
bool test_cpp;
};
CV_BaseShapeDescrTest::CV_BaseShapeDescrTest()
{
points1 = 0;
points2 = 0;
points = 0;
storage = 0;
test_case_count = 500;
min_log_size = 0;
max_log_size = 10;
low = high = cvScalarAll(0);
low_high_range = 50;
dims = 2;
enable_flt_points = true;
test_cpp = false;
}
CV_BaseShapeDescrTest::~CV_BaseShapeDescrTest()
{
clear();
}
void CV_BaseShapeDescrTest::clear()
{
cvtest::BaseTest::clear();
cvReleaseMemStorage( &storage );
cvReleaseMat( &points2 );
points1 = 0;
points = 0;
}
int CV_BaseShapeDescrTest::read_params( CvFileStorage* fs )
{
int code = cvtest::BaseTest::read_params( fs );
if( code < 0 )
return code;
test_case_count = cvReadInt( find_param( fs, "struct_count" ), test_case_count );
min_log_size = cvReadInt( find_param( fs, "min_log_size" ), min_log_size );
max_log_size = cvReadInt( find_param( fs, "max_log_size" ), max_log_size );
min_log_size = cvtest::clipInt( min_log_size, 0, 8 );
max_log_size = cvtest::clipInt( max_log_size, 0, 10 );
if( min_log_size > max_log_size )
{
int t;
CV_SWAP( min_log_size, max_log_size, t );
}
return 0;
}
void CV_BaseShapeDescrTest::generate_point_set( void* pointsSet )
{
RNG& rng = ts->get_rng();
int i, k, n, total, point_type;
CvSeqReader reader;
uchar* data = 0;
double a[4], b[4];
for( k = 0; k < 4; k++ )
{
a[k] = high.val[k] - low.val[k];
b[k] = low.val[k];
}
memset( &reader, 0, sizeof(reader) );
if( CV_IS_SEQ(pointsSet) )
{
CvSeq* ptseq = (CvSeq*)pointsSet;
total = ptseq->total;
point_type = CV_SEQ_ELTYPE(ptseq);
cvStartReadSeq( ptseq, &reader );
}
else
{
CvMat* ptm = (CvMat*)pointsSet;
assert( CV_IS_MAT(ptm) && CV_IS_MAT_CONT(ptm->type) );
total = ptm->rows + ptm->cols - 1;
point_type = CV_MAT_TYPE(ptm->type);
data = ptm->data.ptr;
}
n = CV_MAT_CN(point_type);
point_type = CV_MAT_DEPTH(point_type);
assert( (point_type == CV_32S || point_type == CV_32F) && n <= 4 );
for( i = 0; i < total; i++ )
{
int* pi;
float* pf;
if( reader.ptr )
{
pi = (int*)reader.ptr;
pf = (float*)reader.ptr;
CV_NEXT_SEQ_ELEM( reader.seq->elem_size, reader );
}
else
{
pi = (int*)data + i*n;
pf = (float*)data + i*n;
}
if( point_type == CV_32S )
for( k = 0; k < n; k++ )
pi[k] = cvRound(cvtest::randReal(rng)*a[k] + b[k]);
else
for( k = 0; k < n; k++ )
pf[k] = (float)(cvtest::randReal(rng)*a[k] + b[k]);
}
}
int CV_BaseShapeDescrTest::prepare_test_case( int test_case_idx )
{
int size;
int use_storage = 0;
int point_type;
int i;
RNG& rng = ts->get_rng();
cvtest::BaseTest::prepare_test_case( test_case_idx );
clear();
size = cvRound( exp((cvtest::randReal(rng) * (max_log_size - min_log_size) + min_log_size)*CV_LOG2) );
use_storage = cvtest::randInt(rng) % 2;
point_type = CV_MAKETYPE(cvtest::randInt(rng) %
(enable_flt_points ? 2 : 1) ? CV_32F : CV_32S, dims);
if( use_storage )
{
storage = cvCreateMemStorage( (cvtest::randInt(rng)%10 + 1)*1024 );
points1 = cvCreateSeq( point_type, sizeof(CvSeq), CV_ELEM_SIZE(point_type), storage );
cvSeqPushMulti( points1, 0, size );
points = points1;
}
else
{
int rows = 1, cols = size;
if( cvtest::randInt(rng) % 2 )
rows = size, cols = 1;
points2 = cvCreateMat( rows, cols, point_type );
points = points2;
}
for( i = 0; i < 4; i++ )
{
low.val[i] = (cvtest::randReal(rng)-0.5)*low_high_range*2;
high.val[i] = (cvtest::randReal(rng)-0.5)*low_high_range*2;
if( low.val[i] > high.val[i] )
{
double t;
CV_SWAP( low.val[i], high.val[i], t );
}
if( high.val[i] < low.val[i] + 1 )
high.val[i] += 1;
}
generate_point_set( points );
test_cpp = (cvtest::randInt(rng) & 16) == 0;
return 1;
}
void CV_BaseShapeDescrTest::extract_points()
{
if( points1 )
{
points2 = cvCreateMat( 1, points1->total, CV_SEQ_ELTYPE(points1) );
cvCvtSeqToArray( points1, points2->data.ptr );
}
if( CV_MAT_DEPTH(points2->type) != CV_32F && enable_flt_points )
{
CvMat tmp = cvMat( points2->rows, points2->cols,
(points2->type & ~CV_MAT_DEPTH_MASK) | CV_32F, points2->data.ptr );
cvConvert( points2, &tmp );
}
}
void CV_BaseShapeDescrTest::run_func(void)
{
}
int CV_BaseShapeDescrTest::validate_test_results( int /*test_case_idx*/ )
{
extract_points();
return 0;
}
/****************************************************************************************\
* Convex Hull Test *
\****************************************************************************************/
class CV_ConvHullTest : public CV_BaseShapeDescrTest
{
public:
CV_ConvHullTest();
virtual ~CV_ConvHullTest();
void clear();
protected:
void run_func(void);
int prepare_test_case( int test_case_idx );
int validate_test_results( int test_case_idx );
CvSeq* hull1;
CvMat* hull2;
void* hull_storage;
int orientation;
int return_points;
};
CV_ConvHullTest::CV_ConvHullTest()
{
hull1 = 0;
hull2 = 0;
hull_storage = 0;
orientation = return_points = 0;
}
CV_ConvHullTest::~CV_ConvHullTest()
{
clear();
}
void CV_ConvHullTest::clear()
{
CV_BaseShapeDescrTest::clear();
cvReleaseMat( &hull2 );
hull1 = 0;
hull_storage = 0;
}
int CV_ConvHullTest::prepare_test_case( int test_case_idx )
{
int code = CV_BaseShapeDescrTest::prepare_test_case( test_case_idx );
int use_storage_for_hull = 0;
RNG& rng = ts->get_rng();
if( code <= 0 )
return code;
orientation = cvtest::randInt(rng) % 2 ? CV_CLOCKWISE : CV_COUNTER_CLOCKWISE;
return_points = cvtest::randInt(rng) % 2;
use_storage_for_hull = (cvtest::randInt(rng) % 2) && !test_cpp;
if( use_storage_for_hull )
{
if( !storage )
storage = cvCreateMemStorage( (cvtest::randInt(rng)%10 + 1)*1024 );
hull_storage = storage;
}
else
{
int rows, cols;
int sz = points1 ? points1->total : points2->cols + points2->rows - 1;
int point_type = points1 ? CV_SEQ_ELTYPE(points1) : CV_MAT_TYPE(points2->type);
if( cvtest::randInt(rng) % 2 )
rows = sz, cols = 1;
else
rows = 1, cols = sz;
hull2 = cvCreateMat( rows, cols, return_points ? point_type : CV_32SC1 );
hull_storage = hull2;
}
return code;
}
void CV_ConvHullTest::run_func()
{
if(!test_cpp)
hull1 = cvConvexHull2( points, hull_storage, orientation, return_points );
else
{
cv::Mat _points = cv::cvarrToMat(points);
bool clockwise = orientation == CV_CLOCKWISE;
size_t n = 0;
if( !return_points )
{
std::vector<int> _hull;
cv::convexHull(_points, _hull, clockwise);
n = _hull.size();
memcpy(hull2->data.ptr, &_hull[0], n*sizeof(_hull[0]));
}
else if(_points.type() == CV_32SC2)
{
std::vector<cv::Point> _hull;
cv::convexHull(_points, _hull, clockwise);
n = _hull.size();
memcpy(hull2->data.ptr, &_hull[0], n*sizeof(_hull[0]));
}
else if(_points.type() == CV_32FC2)
{
std::vector<cv::Point2f> _hull;
cv::convexHull(_points, _hull, clockwise);
n = _hull.size();
memcpy(hull2->data.ptr, &_hull[0], n*sizeof(_hull[0]));
}
if(hull2->rows > hull2->cols)
hull2->rows = (int)n;
else
hull2->cols = (int)n;
}
}
int CV_ConvHullTest::validate_test_results( int test_case_idx )
{
int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx );
CvMat* hull = 0;
CvMat* mask = 0;
int i, point_count, hull_count;
CvPoint2D32f *p, *h;
CvSeq header, hheader, *ptseq, *hseq;
CvSeqBlock block, hblock;
if( points1 )
ptseq = points1;
else
ptseq = cvMakeSeqHeaderForArray( CV_MAT_TYPE(points2->type),
sizeof(CvSeq), CV_ELEM_SIZE(points2->type), points2->data.ptr,
points2->rows + points2->cols - 1, &header, &block );
point_count = ptseq->total;
p = (CvPoint2D32f*)(points2->data.ptr);
if( hull1 )
hseq = hull1;
else
hseq = cvMakeSeqHeaderForArray( CV_MAT_TYPE(hull2->type),
sizeof(CvSeq), CV_ELEM_SIZE(hull2->type), hull2->data.ptr,
hull2->rows + hull2->cols - 1, &hheader, &hblock );
hull_count = hseq->total;
hull = cvCreateMat( 1, hull_count, CV_32FC2 );
mask = cvCreateMat( 1, hull_count, CV_8UC1 );
cvZero( mask );
h = (CvPoint2D32f*)(hull->data.ptr);
// extract convex hull points
if( return_points )
{
cvCvtSeqToArray( hseq, hull->data.ptr );
if( CV_SEQ_ELTYPE(hseq) != CV_32FC2 )
{
CvMat tmp = cvMat( hull->rows, hull->cols, CV_32SC2, hull->data.ptr );
cvConvert( &tmp, hull );
}
}
else
{
CvSeqReader reader;
cvStartReadSeq( hseq, &reader );
for( i = 0; i < hull_count; i++ )
{
schar* ptr = reader.ptr;
int idx;
CV_NEXT_SEQ_ELEM( hseq->elem_size, reader );
if( hull1 )
idx = cvSeqElemIdx( ptseq, *(uchar**)ptr );
else
idx = *(int*)ptr;
if( idx < 0 || idx >= point_count )
{
ts->printf( cvtest::TS::LOG, "Invalid convex hull point #%d\n", i );
code = cvtest::TS::FAIL_INVALID_OUTPUT;
goto _exit_;
}
h[i] = p[idx];
}
}
// check that the convex hull is a convex polygon
if( hull_count >= 3 )
{
CvPoint2D32f pt0 = h[hull_count-1];
for( i = 0; i < hull_count; i++ )
{
int j = i+1;
CvPoint2D32f pt1 = h[i], pt2 = h[j < hull_count ? j : 0];
float dx0 = pt1.x - pt0.x, dy0 = pt1.y - pt0.y;
float dx1 = pt2.x - pt1.x, dy1 = pt2.y - pt1.y;
double t = (double)dx0*dy1 - (double)dx1*dy0;
if( (t < 0) ^ (orientation != CV_COUNTER_CLOCKWISE) )
{
ts->printf( cvtest::TS::LOG, "The convex hull is not convex or has a wrong orientation (vtx %d)\n", i );
code = cvtest::TS::FAIL_INVALID_OUTPUT;
goto _exit_;
}
pt0 = pt1;
}
}
// check that all the points are inside the hull or on the hull edge
// and at least hull_point points are at the hull vertices
for( i = 0; i < point_count; i++ )
{
int idx = 0, on_edge = 0;
double pptresult = cvTsPointPolygonTest( p[i], h, hull_count, &idx, &on_edge );
if( pptresult < 0 )
{
ts->printf( cvtest::TS::LOG, "The point #%d is outside of the convex hull\n", i );
code = cvtest::TS::FAIL_BAD_ACCURACY;
goto _exit_;
}
if( pptresult < FLT_EPSILON && !on_edge )
mask->data.ptr[idx] = (uchar)1;
}
if( cvNorm( mask, 0, CV_L1 ) != hull_count )
{
ts->printf( cvtest::TS::LOG, "Not every convex hull vertex coincides with some input point\n" );
code = cvtest::TS::FAIL_BAD_ACCURACY;
goto _exit_;
}
_exit_:
cvReleaseMat( &hull );
cvReleaseMat( &mask );
if( code < 0 )
ts->set_failed_test_info( code );
return code;
}
/****************************************************************************************\
* MinAreaRect Test *
\****************************************************************************************/
class CV_MinAreaRectTest : public CV_BaseShapeDescrTest
{
public:
CV_MinAreaRectTest();
protected:
void run_func(void);
int validate_test_results( int test_case_idx );
CvBox2D box;
CvPoint2D32f box_pt[4];
};
CV_MinAreaRectTest::CV_MinAreaRectTest()
{
}
void CV_MinAreaRectTest::run_func()
{
if(!test_cpp)
{
box = cvMinAreaRect2( points, storage );
cvBoxPoints( box, box_pt );
}
else
{
cv::RotatedRect r = cv::minAreaRect(cv::cvarrToMat(points));
box = (CvBox2D)r;
r.points((cv::Point2f*)box_pt);
}
}
int CV_MinAreaRectTest::validate_test_results( int test_case_idx )
{
double eps = 1e-1;
int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx );
int i, j, point_count = points2->rows + points2->cols - 1;
CvPoint2D32f *p = (CvPoint2D32f*)(points2->data.ptr);
int mask[] = {0,0,0,0};
// check that the bounding box is a rotated rectangle:
// 1. diagonals should be equal
// 2. they must intersect in their middle points
{
double d0 = cvTsDist( box_pt[0], box_pt[2] );
double d1 = cvTsDist( box_pt[1], box_pt[3] );
double x0 = (box_pt[0].x + box_pt[2].x)*0.5;
double y0 = (box_pt[0].y + box_pt[2].y)*0.5;
double x1 = (box_pt[1].x + box_pt[3].x)*0.5;
double y1 = (box_pt[1].y + box_pt[3].y)*0.5;
if( fabs(d0 - d1) + fabs(x0 - x1) + fabs(y0 - y1) > eps*MAX(d0,d1) )
{
ts->printf( cvtest::TS::LOG, "The bounding box is not a rectangle\n" );
code = cvtest::TS::FAIL_INVALID_OUTPUT;
goto _exit_;
}
}
#if 0
{
int n = 4;
double a = 8, c = 8, b = 100, d = 150;
CvPoint bp[4], *bpp = bp;
cvNamedWindow( "test", 1 );
IplImage* img = cvCreateImage( cvSize(500,500), 8, 3 );
cvZero(img);
for( i = 0; i < point_count; i++ )
cvCircle(img,cvPoint(cvRound(p[i].x*a+b),cvRound(p[i].y*c+d)), 3, CV_RGB(0,255,0), -1 );
for( i = 0; i < n; i++ )
bp[i] = cvPoint(cvRound(box_pt[i].x*a+b),cvRound(box_pt[i].y*c+d));
cvPolyLine( img, &bpp, &n, 1, 1, CV_RGB(255,255,0), 1, CV_AA, 0 );
cvShowImage( "test", img );
cvWaitKey();
cvReleaseImage(&img);
}
#endif
// check that the box includes all the points
// and there is at least one point at (or very close to) every box side
for( i = 0; i < point_count; i++ )
{
int idx = 0, on_edge = 0;
double pptresult = cvTsPointPolygonTest( p[i], box_pt, 4, &idx, &on_edge );
if( pptresult < -eps )
{
ts->printf( cvtest::TS::LOG, "The point #%d is outside of the box\n", i );
code = cvtest::TS::FAIL_BAD_ACCURACY;
goto _exit_;
}
if( pptresult < eps )
{
for( j = 0; j < 4; j++ )
{
double d = cvTsPtLineDist( p[i], box_pt[(j-1)&3], box_pt[j] );
if( d < eps )
mask[j] = (uchar)1;
}
}
}
if( mask[0] + mask[1] + mask[2] + mask[3] != 4 )
{
ts->printf( cvtest::TS::LOG, "Not every box side has a point nearby\n" );
code = cvtest::TS::FAIL_BAD_ACCURACY;
goto _exit_;
}
_exit_:
if( code < 0 )
ts->set_failed_test_info( code );
return code;
}
/****************************************************************************************\
* MinEnclosingTriangle Test *
\****************************************************************************************/
class CV_MinTriangleTest : public CV_BaseShapeDescrTest
{
public:
CV_MinTriangleTest();
protected:
void run_func(void);
int validate_test_results( int test_case_idx );
std::vector<cv::Point2f> getTriangleMiddlePoints();
std::vector<cv::Point2f> convexPolygon;
std::vector<cv::Point2f> triangle;
};
CV_MinTriangleTest::CV_MinTriangleTest()
{
}
std::vector<cv::Point2f> CV_MinTriangleTest::getTriangleMiddlePoints()
{
std::vector<cv::Point2f> triangleMiddlePoints;
for (int i = 0; i < 3; i++) {
triangleMiddlePoints.push_back(cvTsMiddlePoint(triangle[i], triangle[(i + 1) % 3]));
}
return triangleMiddlePoints;
}
void CV_MinTriangleTest::run_func()
{
std::vector<cv::Point2f> pointsAsVector;
cv::cvarrToMat(points).convertTo(pointsAsVector, CV_32F);
cv::minEnclosingTriangle(pointsAsVector, triangle);
cv::convexHull(pointsAsVector, convexPolygon, true, true);
}
int CV_MinTriangleTest::validate_test_results( int test_case_idx )
{
bool errorEnclosed = false, errorMiddlePoints = false, errorFlush = true;
double eps = 1e-4;
int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx );
#if 0
{
int n = 3;
double a = 8, c = 8, b = 100, d = 150;
CvPoint bp[4], *bpp = bp;
cvNamedWindow( "test", 1 );
IplImage* img = cvCreateImage( cvSize(500,500), 8, 3 );
cvZero(img);
for( i = 0; i < point_count; i++ )
cvCircle(img,cvPoint(cvRound(p[i].x*a+b),cvRound(p[i].y*c+d)), 3, CV_RGB(0,255,0), -1 );
for( i = 0; i < n; i++ )
bp[i] = cvPoint(cvRound(triangle[i].x*a+b),cvRound(triangle[i].y*c+d));
cvPolyLine( img, &bpp, &n, 1, 1, CV_RGB(255,255,0), 1, CV_AA, 0 );
cvShowImage( "test", img );
cvWaitKey();
cvReleaseImage(&img);
}
#endif
int polygonVertices = (int) convexPolygon.size();
if (polygonVertices > 2) {
// Check if all points are enclosed by the triangle
for (int i = 0; (i < polygonVertices) && (!errorEnclosed); i++)
{
if (cv::pointPolygonTest(triangle, cv::Point2f(convexPolygon[i].x, convexPolygon[i].y), true) < (-eps))
errorEnclosed = true;
}
// Check if triangle edges middle points touch the polygon
std::vector<cv::Point2f> middlePoints = getTriangleMiddlePoints();
for (int i = 0; (i < 3) && (!errorMiddlePoints); i++)
{
bool isTouching = false;
for (int j = 0; (j < polygonVertices) && (!isTouching); j++)
{
if (cvTsIsPointOnLineSegment(middlePoints[i], convexPolygon[j],
convexPolygon[(j + 1) % polygonVertices]))
isTouching = true;
}
errorMiddlePoints = (isTouching) ? false : true;
}
// Check if at least one of the edges is flush
for (int i = 0; (i < 3) && (errorFlush); i++)
{
for (int j = 0; (j < polygonVertices) && (errorFlush); j++)
{
if ((cvTsIsPointOnLineSegment(convexPolygon[j], triangle[i],
triangle[(i + 1) % 3])) &&
(cvTsIsPointOnLineSegment(convexPolygon[(j + 1) % polygonVertices], triangle[i],
triangle[(i + 1) % 3])))
errorFlush = false;
}
}
// Report any found errors
if (errorEnclosed)
{
ts->printf( cvtest::TS::LOG,
"All points should be enclosed by the triangle.\n" );
code = cvtest::TS::FAIL_BAD_ACCURACY;
}
else if (errorMiddlePoints)
{
ts->printf( cvtest::TS::LOG,
"All triangle edges middle points should touch the convex hull of the points.\n" );
code = cvtest::TS::FAIL_INVALID_OUTPUT;
}
else if (errorFlush)
{
ts->printf( cvtest::TS::LOG,
"At least one edge of the enclosing triangle should be flush with one edge of the polygon.\n" );
code = cvtest::TS::FAIL_INVALID_OUTPUT;
}
}
if ( code < 0 )
ts->set_failed_test_info( code );
return code;
}
/****************************************************************************************\
* MinEnclosingCircle Test *
\****************************************************************************************/
class CV_MinCircleTest : public CV_BaseShapeDescrTest
{
public:
CV_MinCircleTest();
protected:
void run_func(void);
int validate_test_results( int test_case_idx );
CvPoint2D32f center;
float radius;
};
CV_MinCircleTest::CV_MinCircleTest()
{
}
void CV_MinCircleTest::run_func()
{
if(!test_cpp)
cvMinEnclosingCircle( points, &center, &radius );
else
{
cv::Point2f tmpcenter;
cv::minEnclosingCircle(cv::cvarrToMat(points), tmpcenter, radius);
center = tmpcenter;
}
}
int CV_MinCircleTest::validate_test_results( int test_case_idx )
{
double eps = 1.03;
int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx );
int i, j = 0, point_count = points2->rows + points2->cols - 1;
CvPoint2D32f *p = (CvPoint2D32f*)(points2->data.ptr);
CvPoint2D32f v[3];
#if 0
{
double a = 2, b = 200, d = 400;
cvNamedWindow( "test", 1 );
IplImage* img = cvCreateImage( cvSize(500,500), 8, 3 );
cvZero(img);
for( i = 0; i < point_count; i++ )
cvCircle(img,cvPoint(cvRound(p[i].x*a+b),cvRound(p[i].y*a+d)), 3, CV_RGB(0,255,0), -1 );
cvCircle( img, cvPoint(cvRound(center.x*a+b),cvRound(center.y*a+d)),
cvRound(radius*a), CV_RGB(255,255,0), 1 );
cvShowImage( "test", img );
cvWaitKey();
cvReleaseImage(&img);
}
#endif
// check that the circle contains all the points inside and
// remember at most 3 points that are close to the boundary
for( i = 0; i < point_count; i++ )
{
double d = cvTsDist( p[i], center );
if( d > radius )
{
ts->printf( cvtest::TS::LOG, "The point #%d is outside of the circle\n", i );
code = cvtest::TS::FAIL_BAD_ACCURACY;
goto _exit_;
}
if( radius - d < eps*radius && j < 3 )
v[j++] = p[i];
}
if( point_count >= 2 && (j < 2 || (j == 2 && cvTsDist(v[0],v[1]) < (radius-1)*2/eps)) )
{
ts->printf( cvtest::TS::LOG,
"There should be at at least 3 points near the circle boundary or 2 points on the diameter\n" );
code = cvtest::TS::FAIL_BAD_ACCURACY;
goto _exit_;
}
_exit_:
if( code < 0 )
ts->set_failed_test_info( code );
return code;
}
/****************************************************************************************\
* Perimeter Test *
\****************************************************************************************/
class CV_PerimeterTest : public CV_BaseShapeDescrTest
{
public:
CV_PerimeterTest();
protected:
int prepare_test_case( int test_case_idx );
void run_func(void);
int validate_test_results( int test_case_idx );
CvSlice slice;
int is_closed;
double result;
};
CV_PerimeterTest::CV_PerimeterTest()
{
}
int CV_PerimeterTest::prepare_test_case( int test_case_idx )
{
int code = CV_BaseShapeDescrTest::prepare_test_case( test_case_idx );
RNG& rng = ts->get_rng();
int total;
if( code < 0 )
return code;
is_closed = cvtest::randInt(rng) % 2;
if( points1 )
{
points1->flags |= CV_SEQ_KIND_CURVE;
if( is_closed )
points1->flags |= CV_SEQ_FLAG_CLOSED;
total = points1->total;
}
else
total = points2->cols + points2->rows - 1;
if( (cvtest::randInt(rng) % 3) && !test_cpp )
{
slice.start_index = cvtest::randInt(rng) % total;
slice.end_index = cvtest::randInt(rng) % total;
}
else
slice = CV_WHOLE_SEQ;
return 1;
}
void CV_PerimeterTest::run_func()
{
if(!test_cpp)
result = cvArcLength( points, slice, points1 ? -1 : is_closed );
else
result = cv::arcLength(cv::cvarrToMat(points),
!points1 ? is_closed != 0 : (points1->flags & CV_SEQ_FLAG_CLOSED) != 0);
}
int CV_PerimeterTest::validate_test_results( int test_case_idx )
{
int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx );
int i, len = slice.end_index - slice.start_index, total = points2->cols + points2->rows - 1;
double result0 = 0;
CvPoint2D32f prev_pt, pt, *ptr;
if( len < 0 )
len += total;
len = MIN( len, total );
//len -= !is_closed && len == total;
ptr = (CvPoint2D32f*)points2->data.fl;
prev_pt = ptr[(is_closed ? slice.start_index+len-1 : slice.start_index) % total];
for( i = 0; i < len + (len < total && (!is_closed || len==1)); i++ )
{
pt = ptr[(i + slice.start_index) % total];
double dx = pt.x - prev_pt.x, dy = pt.y - prev_pt.y;
result0 += sqrt(dx*dx + dy*dy);
prev_pt = pt;
}
if( cvIsNaN(result) || cvIsInf(result) )
{
ts->printf( cvtest::TS::LOG, "cvArcLength() returned invalid value (%g)\n", result );
code = cvtest::TS::FAIL_INVALID_OUTPUT;
}
else if( fabs(result - result0) > FLT_EPSILON*100*result0 )
{
ts->printf( cvtest::TS::LOG, "The function returned %g, while the correct result is %g\n", result, result0 );
code = cvtest::TS::FAIL_BAD_ACCURACY;
}
if( code < 0 )
ts->set_failed_test_info( code );
return code;
}
/****************************************************************************************\
* FitEllipse Test *
\****************************************************************************************/
class CV_FitEllipseTest : public CV_BaseShapeDescrTest
{
public:
CV_FitEllipseTest();
protected:
int prepare_test_case( int test_case_idx );
void generate_point_set( void* points );
void run_func(void);
int validate_test_results( int test_case_idx );
CvBox2D box0, box;
double min_ellipse_size, max_noise;
};
CV_FitEllipseTest::CV_FitEllipseTest()
{
min_log_size = 5; // for robust ellipse fitting a dozen of points is needed at least
max_log_size = 10;
min_ellipse_size = 10;
max_noise = 0.05;
}
void CV_FitEllipseTest::generate_point_set( void* pointsSet )
{
RNG& rng = ts->get_rng();
int i, total, point_type;
CvSeqReader reader;
uchar* data = 0;
double a, b;
box0.center.x = (float)((low.val[0] + high.val[0])*0.5);
box0.center.y = (float)((low.val[1] + high.val[1])*0.5);
box0.size.width = (float)(MAX(high.val[0] - low.val[0], min_ellipse_size)*2);
box0.size.height = (float)(MAX(high.val[1] - low.val[1], min_ellipse_size)*2);
box0.angle = (float)(cvtest::randReal(rng)*180);
a = cos(box0.angle*CV_PI/180.);
b = sin(box0.angle*CV_PI/180.);
if( box0.size.width > box0.size.height )
{
float t;
CV_SWAP( box0.size.width, box0.size.height, t );
}
memset( &reader, 0, sizeof(reader) );
if( CV_IS_SEQ(pointsSet) )
{
CvSeq* ptseq = (CvSeq*)pointsSet;
total = ptseq->total;
point_type = CV_SEQ_ELTYPE(ptseq);
cvStartReadSeq( ptseq, &reader );
}
else
{
CvMat* ptm = (CvMat*)pointsSet;
assert( CV_IS_MAT(ptm) && CV_IS_MAT_CONT(ptm->type) );
total = ptm->rows + ptm->cols - 1;
point_type = CV_MAT_TYPE(ptm->type);
data = ptm->data.ptr;
}
assert( point_type == CV_32SC2 || point_type == CV_32FC2 );
for( i = 0; i < total; i++ )
{
CvPoint* pp;
CvPoint2D32f p;
double angle = cvtest::randReal(rng)*CV_PI*2;
double x = box0.size.height*0.5*(cos(angle) + (cvtest::randReal(rng)-0.5)*2*max_noise);
double y = box0.size.width*0.5*(sin(angle) + (cvtest::randReal(rng)-0.5)*2*max_noise);
p.x = (float)(box0.center.x + a*x + b*y);
p.y = (float)(box0.center.y - b*x + a*y);
if( reader.ptr )
{
pp = (CvPoint*)reader.ptr;
CV_NEXT_SEQ_ELEM( sizeof(*pp), reader );
}
else
pp = ((CvPoint*)data) + i;
if( point_type == CV_32SC2 )
{
pp->x = cvRound(p.x);
pp->y = cvRound(p.y);
}
else
*(CvPoint2D32f*)pp = p;
}
}
int CV_FitEllipseTest::prepare_test_case( int test_case_idx )
{
min_log_size = MAX(min_log_size,4);
max_log_size = MAX(min_log_size,max_log_size);
return CV_BaseShapeDescrTest::prepare_test_case( test_case_idx );
}
void CV_FitEllipseTest::run_func()
{
if(!test_cpp)
box = cvFitEllipse2( points );
else
box = (CvBox2D)cv::fitEllipse(cv::cvarrToMat(points));
}
int CV_FitEllipseTest::validate_test_results( int test_case_idx )
{
int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx );
double diff_angle;
if( cvIsNaN(box.center.x) || cvIsInf(box.center.x) ||
cvIsNaN(box.center.y) || cvIsInf(box.center.y) ||
cvIsNaN(box.size.width) || cvIsInf(box.size.width) ||
cvIsNaN(box.size.height) || cvIsInf(box.size.height) ||
cvIsNaN(box.angle) || cvIsInf(box.angle) )
{
ts->printf( cvtest::TS::LOG, "Some of the computed ellipse parameters are invalid (x=%g,y=%g,w=%g,h=%g,angle=%g)\n",
box.center.x, box.center.y, box.size.width, box.size.height, box.angle );
code = cvtest::TS::FAIL_INVALID_OUTPUT;
goto _exit_;
}
box.angle = (float)(90-box.angle);
if( box.angle < 0 )
box.angle += 360;
if( box.angle > 360 )
box.angle -= 360;
if( fabs(box.center.x - box0.center.x) > 3 ||
fabs(box.center.y - box0.center.y) > 3 ||
fabs(box.size.width - box0.size.width) > 0.1*fabs(box0.size.width) ||
fabs(box.size.height - box0.size.height) > 0.1*fabs(box0.size.height) )
{
ts->printf( cvtest::TS::LOG, "The computed ellipse center and/or size are incorrect:\n\t"
"(x=%.1f,y=%.1f,w=%.1f,h=%.1f), while it should be (x=%.1f,y=%.1f,w=%.1f,h=%.1f)\n",
box.center.x, box.center.y, box.size.width, box.size.height,
box0.center.x, box0.center.y, box0.size.width, box0.size.height );
code = cvtest::TS::FAIL_BAD_ACCURACY;
goto _exit_;
}
diff_angle = fabs(box0.angle - box.angle);
diff_angle = MIN( diff_angle, fabs(diff_angle - 360));
diff_angle = MIN( diff_angle, fabs(diff_angle - 180));
if( box0.size.height >= 1.3*box0.size.width && diff_angle > 30 )
{
ts->printf( cvtest::TS::LOG, "Incorrect ellipse angle (=%1.f, should be %1.f)\n",
box.angle, box0.angle );
code = cvtest::TS::FAIL_BAD_ACCURACY;
goto _exit_;
}
_exit_:
#if 0
if( code < 0 )
{
cvNamedWindow( "test", 0 );
IplImage* img = cvCreateImage( cvSize(cvRound(low_high_range*4),
cvRound(low_high_range*4)), 8, 3 );
cvZero( img );
box.center.x += (float)low_high_range*2;
box.center.y += (float)low_high_range*2;
cvEllipseBox( img, box, CV_RGB(255,0,0), 3, 8 );
for( int i = 0; i < points2->rows + points2->cols - 1; i++ )
{
CvPoint pt;
pt.x = cvRound(points2->data.fl[i*2] + low_high_range*2);
pt.y = cvRound(points2->data.fl[i*2+1] + low_high_range*2);
cvCircle( img, pt, 1, CV_RGB(255,255,255), -1, 8 );
}
cvShowImage( "test", img );
cvReleaseImage( &img );
cvWaitKey(0);
}
#endif
if( code < 0 )
{
ts->set_failed_test_info( code );
}
return code;
}
class CV_FitEllipseSmallTest : public cvtest::BaseTest
{
public:
CV_FitEllipseSmallTest() {}
~CV_FitEllipseSmallTest() {}
protected:
void run(int)
{
Size sz(50, 50);
vector<vector<Point> > c;
c.push_back(vector<Point>());
int scale = 1;
Point ofs = Point(0,0);//sz.width/2, sz.height/2) - Point(4,4)*scale;
c[0].push_back(Point(2, 0)*scale+ofs);
c[0].push_back(Point(0, 2)*scale+ofs);
c[0].push_back(Point(0, 6)*scale+ofs);
c[0].push_back(Point(2, 8)*scale+ofs);
c[0].push_back(Point(6, 8)*scale+ofs);
c[0].push_back(Point(8, 6)*scale+ofs);
c[0].push_back(Point(8, 2)*scale+ofs);
c[0].push_back(Point(6, 0)*scale+ofs);
RotatedRect e = fitEllipse(c[0]);
CV_Assert( fabs(e.center.x - 4) <= 1. &&
fabs(e.center.y - 4) <= 1. &&
fabs(e.size.width - 9) <= 1. &&
fabs(e.size.height - 9) <= 1. );
}
};
/****************************************************************************************\
* FitLine Test *
\****************************************************************************************/
class CV_FitLineTest : public CV_BaseShapeDescrTest
{
public:
CV_FitLineTest();
protected:
int prepare_test_case( int test_case_idx );
void generate_point_set( void* points );
void run_func(void);
int validate_test_results( int test_case_idx );
double max_noise;
float line[6], line0[6];
int dist_type;
double reps, aeps;
};
CV_FitLineTest::CV_FitLineTest()
{
min_log_size = 5; // for robust ellipse fitting a dozen of points is needed at least
max_log_size = 10;
max_noise = 0.05;
}
#if defined(__GNUC__) && (__GNUC__ == 4) && (__GNUC_MINOR__ == 8)
# pragma GCC diagnostic push
# pragma GCC diagnostic ignored "-Warray-bounds"
#endif
void CV_FitLineTest::generate_point_set( void* pointsSet )
{
RNG& rng = ts->get_rng();
int i, k, n, total, point_type;
CvSeqReader reader;
uchar* data = 0;
double s = 0;
n = dims;
for( k = 0; k < n; k++ )
{
line0[k+n] = (float)((low.val[k] + high.val[k])*0.5);
line0[k] = (float)(high.val[k] - low.val[k]);
if( cvtest::randInt(rng) % 2 )
line0[k] = -line0[k];
s += (double)line0[k]*line0[k];
}
s = 1./sqrt(s);
for( k = 0; k < n; k++ )
line0[k] = (float)(line0[k]*s);
memset( &reader, 0, sizeof(reader) );
if( CV_IS_SEQ(pointsSet) )
{
CvSeq* ptseq = (CvSeq*)pointsSet;
total = ptseq->total;
point_type = CV_MAT_DEPTH(CV_SEQ_ELTYPE(ptseq));
cvStartReadSeq( ptseq, &reader );
}
else
{
CvMat* ptm = (CvMat*)pointsSet;
assert( CV_IS_MAT(ptm) && CV_IS_MAT_CONT(ptm->type) );
total = ptm->rows + ptm->cols - 1;
point_type = CV_MAT_DEPTH(CV_MAT_TYPE(ptm->type));
data = ptm->data.ptr;
}
for( i = 0; i < total; i++ )
{
int* pi;
float* pf;
float p[4], t;
if( reader.ptr )
{
pi = (int*)reader.ptr;
pf = (float*)reader.ptr;
CV_NEXT_SEQ_ELEM( reader.seq->elem_size, reader );
}
else
{
pi = (int*)data + i*n;
pf = (float*)data + i*n;
}
t = (float)((cvtest::randReal(rng)-0.5)*low_high_range*2);
for( k = 0; k < n; k++ )
{
p[k] = (float)((cvtest::randReal(rng)-0.5)*max_noise*2 + t*line0[k] + line0[k+n]);
if( point_type == CV_32S )
pi[k] = cvRound(p[k]);
else
pf[k] = p[k];
}
}
}
#if defined(__GNUC__) && (__GNUC__ == 4) && (__GNUC_MINOR__ == 8)
# pragma GCC diagnostic pop
#endif
int CV_FitLineTest::prepare_test_case( int test_case_idx )
{
RNG& rng = ts->get_rng();
dims = cvtest::randInt(rng) % 2 + 2;
min_log_size = MAX(min_log_size,5);
max_log_size = MAX(min_log_size,max_log_size);
int code = CV_BaseShapeDescrTest::prepare_test_case( test_case_idx );
dist_type = cvtest::randInt(rng) % 6 + 1;
dist_type += dist_type == CV_DIST_C;
reps = 0.1; aeps = 0.01;
return code;
}
void CV_FitLineTest::run_func()
{
if(!test_cpp)
cvFitLine( points, dist_type, 0, reps, aeps, line );
else if(dims == 2)
cv::fitLine(cv::cvarrToMat(points), (cv::Vec4f&)line[0], dist_type, 0, reps, aeps);
else
cv::fitLine(cv::cvarrToMat(points), (cv::Vec6f&)line[0], dist_type, 0, reps, aeps);
}
#if defined(__GNUC__) && (__GNUC__ == 4) && (__GNUC_MINOR__ == 8)
# pragma GCC diagnostic push
# pragma GCC diagnostic ignored "-Warray-bounds"
#endif
int CV_FitLineTest::validate_test_results( int test_case_idx )
{
int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx );
int k, max_k = 0;
double vec_diff = 0, t;
for( k = 0; k < dims*2; k++ )
{
if( cvIsNaN(line[k]) || cvIsInf(line[k]) )
{
ts->printf( cvtest::TS::LOG, "Some of the computed line parameters are invalid (line[%d]=%g)\n",
k, line[k] );
code = cvtest::TS::FAIL_INVALID_OUTPUT;
goto _exit_;
}
}
if( fabs(line0[1]) > fabs(line0[0]) )
max_k = 1;
if( fabs(line0[dims-1]) > fabs(line0[max_k]) )
max_k = dims-1;
if( line0[max_k] < 0 )
for( k = 0; k < dims; k++ )
line0[k] = -line0[k];
if( line[max_k] < 0 )
for( k = 0; k < dims; k++ )
line[k] = -line[k];
for( k = 0; k < dims; k++ )
{
double dt = line[k] - line0[k];
vec_diff += dt*dt;
}
if( sqrt(vec_diff) > 0.05 )
{
if( dims == 2 )
ts->printf( cvtest::TS::LOG,
"The computed line vector (%.2f,%.2f) is different from the actual (%.2f,%.2f)\n",
line[0], line[1], line0[0], line0[1] );
else
ts->printf( cvtest::TS::LOG,
"The computed line vector (%.2f,%.2f,%.2f) is different from the actual (%.2f,%.2f,%.2f)\n",
line[0], line[1], line[2], line0[0], line0[1], line0[2] );
code = cvtest::TS::FAIL_BAD_ACCURACY;
goto _exit_;
}
t = (line[max_k+dims] - line0[max_k+dims])/line0[max_k];
for( k = 0; k < dims; k++ )
{
double p = line0[k+dims] + t*line0[k] - line[k+dims];
vec_diff += p*p;
}
if( sqrt(vec_diff) > 1*MAX(fabs(t),1) )
{
if( dims == 2 )
ts->printf( cvtest::TS::LOG,
"The computed line point (%.2f,%.2f) is too far from the actual line\n",
line[2]+line0[2], line[3]+line0[3] );
else
ts->printf( cvtest::TS::LOG,
"The computed line point (%.2f,%.2f,%.2f) is too far from the actual line\n",
line[3]+line0[3], line[4]+line0[4], line[5]+line0[5] );
code = cvtest::TS::FAIL_BAD_ACCURACY;
goto _exit_;
}
_exit_:
if( code < 0 )
{
ts->set_failed_test_info( code );
}
return code;
}
#if defined(__GNUC__) && (__GNUC__ == 4) && (__GNUC_MINOR__ == 8)
# pragma GCC diagnostic pop
#endif
/****************************************************************************************\
* ContourMoments Test *
\****************************************************************************************/
static void
cvTsGenerateTousledBlob( CvPoint2D32f center, CvSize2D32f axes,
double max_r_scale, double angle, CvArr* points, RNG& rng )
{
int i, total, point_type;
uchar* data = 0;
CvSeqReader reader;
memset( &reader, 0, sizeof(reader) );
if( CV_IS_SEQ(points) )
{
CvSeq* ptseq = (CvSeq*)points;
total = ptseq->total;
point_type = CV_SEQ_ELTYPE(ptseq);
cvStartReadSeq( ptseq, &reader );
}
else
{
CvMat* ptm = (CvMat*)points;
assert( CV_IS_MAT(ptm) && CV_IS_MAT_CONT(ptm->type) );
total = ptm->rows + ptm->cols - 1;
point_type = CV_MAT_TYPE(ptm->type);
data = ptm->data.ptr;
}
assert( point_type == CV_32SC2 || point_type == CV_32FC2 );
for( i = 0; i < total; i++ )
{
CvPoint* pp;
CvPoint2D32f p;
double phi0 = 2*CV_PI*i/total;
double phi = CV_PI*angle/180.;
double t = cvtest::randReal(rng)*max_r_scale + (1 - max_r_scale);
double ta = axes.height*t;
double tb = axes.width*t;
double c0 = cos(phi0)*ta, s0 = sin(phi0)*tb;
double c = cos(phi), s = sin(phi);
p.x = (float)(c0*c - s0*s + center.x);
p.y = (float)(c0*s + s0*c + center.y);
if( reader.ptr )
{
pp = (CvPoint*)reader.ptr;
CV_NEXT_SEQ_ELEM( sizeof(*pp), reader );
}
else
pp = ((CvPoint*)data) + i;
if( point_type == CV_32SC2 )
{
pp->x = cvRound(p.x);
pp->y = cvRound(p.y);
}
else
*(CvPoint2D32f*)pp = p;
}
}
class CV_ContourMomentsTest : public CV_BaseShapeDescrTest
{
public:
CV_ContourMomentsTest();
protected:
int prepare_test_case( int test_case_idx );
void generate_point_set( void* points );
void run_func(void);
int validate_test_results( int test_case_idx );
CvMoments moments0, moments;
double area0, area;
CvSize2D32f axes;
CvPoint2D32f center;
int max_max_r_scale;
double max_r_scale, angle;
CvSize img_size;
};
CV_ContourMomentsTest::CV_ContourMomentsTest()
{
min_log_size = 3;
max_log_size = 8;
max_max_r_scale = 15;
low_high_range = 200;
enable_flt_points = false;
}
void CV_ContourMomentsTest::generate_point_set( void* pointsSet )
{
RNG& rng = ts->get_rng();
float max_sz;
axes.width = (float)((cvtest::randReal(rng)*0.9 + 0.1)*low_high_range);
axes.height = (float)((cvtest::randReal(rng)*0.9 + 0.1)*low_high_range);
max_sz = MAX(axes.width, axes.height);
img_size.width = img_size.height = cvRound(low_high_range*2.2);
center.x = (float)(img_size.width*0.5 + (cvtest::randReal(rng)-0.5)*(img_size.width - max_sz*2)*0.8);
center.y = (float)(img_size.height*0.5 + (cvtest::randReal(rng)-0.5)*(img_size.height - max_sz*2)*0.8);
assert( 0 < center.x - max_sz && center.x + max_sz < img_size.width &&
0 < center.y - max_sz && center.y + max_sz < img_size.height );
max_r_scale = cvtest::randReal(rng)*max_max_r_scale*0.01;
angle = cvtest::randReal(rng)*360;
cvTsGenerateTousledBlob( center, axes, max_r_scale, angle, pointsSet, rng );
if( points1 )
points1->flags = CV_SEQ_MAGIC_VAL + CV_SEQ_POLYGON;
}
int CV_ContourMomentsTest::prepare_test_case( int test_case_idx )
{
min_log_size = MAX(min_log_size,3);
max_log_size = MIN(max_log_size,8);
max_log_size = MAX(min_log_size,max_log_size);
int code = CV_BaseShapeDescrTest::prepare_test_case( test_case_idx );
return code;
}
void CV_ContourMomentsTest::run_func()
{
if(!test_cpp)
{
cvMoments( points, &moments );
area = cvContourArea( points );
}
else
{
moments = (CvMoments)cv::moments(cv::cvarrToMat(points));
area = cv::contourArea(cv::cvarrToMat(points));
}
}
int CV_ContourMomentsTest::validate_test_results( int test_case_idx )
{
int code = CV_BaseShapeDescrTest::validate_test_results( test_case_idx );
int i, n = (int)(sizeof(moments)/sizeof(moments.inv_sqrt_m00));
CvMat* img = cvCreateMat( img_size.height, img_size.width, CV_8UC1 );
CvPoint* pt = (CvPoint*)points2->data.i;
int count = points2->cols + points2->rows - 1;
double max_v0 = 0;
cvZero(img);
cvFillPoly( img, &pt, &count, 1, cvScalarAll(1));
cvMoments( img, &moments0 );
for( i = 0; i < n; i++ )
{
double t = fabs((&moments0.m00)[i]);
max_v0 = MAX(max_v0, t);
}
for( i = 0; i <= n; i++ )
{
double v = i < n ? (&moments.m00)[i] : area;
double v0 = i < n ? (&moments0.m00)[i] : moments0.m00;
if( cvIsNaN(v) || cvIsInf(v) )
{
ts->printf( cvtest::TS::LOG,
"The contour %s is invalid (=%g)\n", i < n ? "moment" : "area", v );
code = cvtest::TS::FAIL_INVALID_OUTPUT;
break;
}
if( fabs(v - v0) > 0.1*max_v0 )
{
ts->printf( cvtest::TS::LOG,
"The computed contour %s is %g, while it should be %g\n",
i < n ? "moment" : "area", v, v0 );
code = cvtest::TS::FAIL_BAD_ACCURACY;
break;
}
}
if( code < 0 )
{
#if 0
cvCmpS( img, 0, img, CV_CMP_GT );
cvNamedWindow( "test", 1 );
cvShowImage( "test", img );
cvWaitKey();
#endif
ts->set_failed_test_info( code );
}
cvReleaseMat( &img );
return code;
}
////////////////////////////////////// Perimeter/Area/Slice test ///////////////////////////////////
class CV_PerimeterAreaSliceTest : public cvtest::BaseTest
{
public:
CV_PerimeterAreaSliceTest();
~CV_PerimeterAreaSliceTest();
protected:
void run(int);
};
CV_PerimeterAreaSliceTest::CV_PerimeterAreaSliceTest()
{
}
CV_PerimeterAreaSliceTest::~CV_PerimeterAreaSliceTest() {}
void CV_PerimeterAreaSliceTest::run( int )
{
Ptr<CvMemStorage> storage(cvCreateMemStorage());
RNG& rng = theRNG();
const double min_r = 90, max_r = 120;
for( int i = 0; i < 100; i++ )
{
ts->update_context( this, i, true );
int n = rng.uniform(3, 30);
cvClearMemStorage(storage);
CvSeq* contour = cvCreateSeq(CV_SEQ_POLYGON, sizeof(CvSeq), sizeof(CvPoint), storage);
double dphi = CV_PI*2/n;
CvPoint center;
center.x = rng.uniform(cvCeil(max_r), cvFloor(640-max_r));
center.y = rng.uniform(cvCeil(max_r), cvFloor(480-max_r));
for( int j = 0; j < n; j++ )
{
CvPoint pt;
double r = rng.uniform(min_r, max_r);
double phi = j*dphi;
pt.x = cvRound(center.x + r*cos(phi));
pt.y = cvRound(center.y - r*sin(phi));
cvSeqPush(contour, &pt);
}
CvSlice slice;
for(;;)
{
slice.start_index = rng.uniform(-n/2, 3*n/2);
slice.end_index = rng.uniform(-n/2, 3*n/2);
int len = cvSliceLength(slice, contour);
if( len > 2 )
break;
}
CvSeq *cslice = cvSeqSlice(contour, slice);
/*printf( "%d. (%d, %d) of %d, length = %d, length1 = %d\n",
i, slice.start_index, slice.end_index,
contour->total, cvSliceLength(slice, contour), cslice->total );
double area0 = cvContourArea(cslice);
double area1 = cvContourArea(contour, slice);
if( area0 != area1 )
{
ts->printf(cvtest::TS::LOG,
"The contour area slice is computed differently (%g vs %g)\n", area0, area1 );
ts->set_failed_test_info( cvtest::TS::FAIL_BAD_ACCURACY );
return;
}*/
double len0 = cvArcLength(cslice, CV_WHOLE_SEQ, 1);
double len1 = cvArcLength(contour, slice, 1);
if( len0 != len1 )
{
ts->printf(cvtest::TS::LOG,
"The contour arc length is computed differently (%g vs %g)\n", len0, len1 );
ts->set_failed_test_info( cvtest::TS::FAIL_BAD_ACCURACY );
return;
}
}
ts->set_failed_test_info(cvtest::TS::OK);
}
TEST(Imgproc_ConvexHull, accuracy) { CV_ConvHullTest test; test.safe_run(); }
TEST(Imgproc_MinAreaRect, accuracy) { CV_MinAreaRectTest test; test.safe_run(); }
TEST(Imgproc_MinTriangle, accuracy) { CV_MinTriangleTest test; test.safe_run(); }
TEST(Imgproc_MinCircle, accuracy) { CV_MinCircleTest test; test.safe_run(); }
TEST(Imgproc_ContourPerimeter, accuracy) { CV_PerimeterTest test; test.safe_run(); }
TEST(Imgproc_FitEllipse, accuracy) { CV_FitEllipseTest test; test.safe_run(); }
TEST(Imgproc_FitLine, accuracy) { CV_FitLineTest test; test.safe_run(); }
TEST(Imgproc_ContourMoments, accuracy) { CV_ContourMomentsTest test; test.safe_run(); }
TEST(Imgproc_ContourPerimeterSlice, accuracy) { CV_PerimeterAreaSliceTest test; test.safe_run(); }
TEST(Imgproc_FitEllipse, small) { CV_FitEllipseSmallTest test; test.safe_run(); }
/* End of file. */
Reference in New Issue View Git Blame Copy Permalink