mirror/opencv
1
0
Fork 0
mirror of https://github.com/opencv/opencv.git synced 2024-11-30 06:10:02 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity
f8c454733b
opencv/modules/ml/include/opencv2/ml.hpp
Maksim Shabunin 79e8f0680c Updated ml module interfaces and documentation
2015-02-17 11:46:14 +03:00

1406 lines
64 KiB
C++
Raw Blame History

/*M///////////////////////////////////////////////////////////////////////////////////////
//
// IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
//
// By downloading, copying, installing or using the software you agree to this license.
// If you do not agree to this license, do not download, install,
// copy or use the software.
//
//
// License Agreement
// For Open Source Computer Vision Library
//
// Copyright (C) 2000, Intel Corporation, all rights reserved.
// Copyright (C) 2013, OpenCV Foundation, all rights reserved.
// Copyright (C) 2014, Itseez Inc, all rights reserved.
// Third party copyrights are property of their respective owners.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//
// * Redistribution's of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// * Redistribution's in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
//
// * The name of the copyright holders may not be used to endorse or promote products
// derived from this software without specific prior written permission.
//
// This software is provided by the copyright holders and contributors "as is" and
// any express or implied warranties, including, but not limited to, the implied
// warranties of merchantability and fitness for a particular purpose are disclaimed.
// In no event shall the Intel Corporation or contributors be liable for any direct,
// indirect, incidental, special, exemplary, or consequential damages
// (including, but not limited to, procurement of substitute goods or services;
// loss of use, data, or profits; or business interruption) however caused
// and on any theory of liability, whether in contract, strict liability,
// or tort (including negligence or otherwise) arising in any way out of
// the use of this software, even if advised of the possibility of such damage.
//
//M*/
#ifndef __OPENCV_ML_HPP__
#define __OPENCV_ML_HPP__
#ifdef __cplusplus
# include "opencv2/core.hpp"
#endif
#ifdef __cplusplus
#include <float.h>
#include <map>
#include <iostream>
/**
@defgroup ml Machine Learning
The Machine Learning Library (MLL) is a set of classes and functions for statistical
classification, regression, and clustering of data.
Most of the classification and regression algorithms are implemented as C++ classes. As the
algorithms have different sets of features (like an ability to handle missing measurements or
categorical input variables), there is a little common ground between the classes. This common
ground is defined by the class cv::ml::StatModel that all the other ML classes are derived from.
See detailed overview here: @ref ml_intro.
*/
namespace cv
{
namespace ml
{
//! @addtogroup ml
//! @{
/** @brief Variable types */
enum VariableTypes
{
VAR_NUMERICAL =0, //!< same as VAR_ORDERED
VAR_ORDERED =0, //!< ordered variables
VAR_CATEGORICAL =1 //!< categorical variables
};
/** @brief %Error types */
enum ErrorTypes
{
TEST_ERROR = 0,
TRAIN_ERROR = 1
};
/** @brief Sample types */
enum SampleTypes
{
ROW_SAMPLE = 0, //!< each training sample is a row of samples
COL_SAMPLE = 1 //!< each training sample occupies a column of samples
};
/** @brief The structure represents the logarithmic grid range of statmodel parameters.
It is used for optimizing statmodel accuracy by varying model parameters, the accuracy estimate
being computed by cross-validation.
*/
class CV_EXPORTS_W_MAP ParamGrid
{
public:
/** @brief Default constructor */
ParamGrid();
/** @brief Constructor with parameters */
ParamGrid(double _minVal, double _maxVal, double _logStep);
CV_PROP_RW double minVal; //!< Minimum value of the statmodel parameter. Default value is 0.
CV_PROP_RW double maxVal; //!< Maximum value of the statmodel parameter. Default value is 0.
/** @brief Logarithmic step for iterating the statmodel parameter.
The grid determines the following iteration sequence of the statmodel parameter values:
\f[(minVal, minVal*step, minVal*{step}^2, \dots, minVal*{logStep}^n),\f]
where \f$n\f$ is the maximal index satisfying
\f[\texttt{minVal} * \texttt{logStep} ^n < \texttt{maxVal}\f]
The grid is logarithmic, so logStep must always be greater then 1. Default value is 1.
*/
CV_PROP_RW double logStep;
};
/** @brief Class encapsulating training data.
Please note that the class only specifies the interface of training data, but not implementation.
All the statistical model classes in _ml_ module accepts Ptr\<TrainData\> as parameter. In other
words, you can create your own class derived from TrainData and pass smart pointer to the instance
of this class into StatModel::train.
@sa @ref ml_intro_data
*/
class CV_EXPORTS TrainData
{
public:
static inline float missingValue() { return FLT_MAX; }
virtual ~TrainData();
virtual int getLayout() const = 0;
virtual int getNTrainSamples() const = 0;
virtual int getNTestSamples() const = 0;
virtual int getNSamples() const = 0;
virtual int getNVars() const = 0;
virtual int getNAllVars() const = 0;
virtual void getSample(InputArray varIdx, int sidx, float* buf) const = 0;
virtual Mat getSamples() const = 0;
virtual Mat getMissing() const = 0;
/** @brief Returns matrix of train samples
@param layout The requested layout. If it's different from the initial one, the matrix is
transposed. See ml::SampleTypes.
@param compressSamples if true, the function returns only the training samples (specified by
sampleIdx)
@param compressVars if true, the function returns the shorter training samples, containing only
the active variables.
In current implementation the function tries to avoid physical data copying and returns the
matrix stored inside TrainData (unless the transposition or compression is needed).
*/
virtual Mat getTrainSamples(int layout=ROW_SAMPLE,
bool compressSamples=true,
bool compressVars=true) const = 0;
/** @brief Returns the vector of responses
The function returns ordered or the original categorical responses. Usually it's used in
regression algorithms.
*/
virtual Mat getTrainResponses() const = 0;
/** @brief Returns the vector of normalized categorical responses
The function returns vector of responses. Each response is integer from `0` to `<number of
classes>-1`. The actual label value can be retrieved then from the class label vector, see
TrainData::getClassLabels.
*/
virtual Mat getTrainNormCatResponses() const = 0;
virtual Mat getTestResponses() const = 0;
virtual Mat getTestNormCatResponses() const = 0;
virtual Mat getResponses() const = 0;
virtual Mat getNormCatResponses() const = 0;
virtual Mat getSampleWeights() const = 0;
virtual Mat getTrainSampleWeights() const = 0;
virtual Mat getTestSampleWeights() const = 0;
virtual Mat getVarIdx() const = 0;
virtual Mat getVarType() const = 0;
virtual int getResponseType() const = 0;
virtual Mat getTrainSampleIdx() const = 0;
virtual Mat getTestSampleIdx() const = 0;
virtual void getValues(int vi, InputArray sidx, float* values) const = 0;
virtual void getNormCatValues(int vi, InputArray sidx, int* values) const = 0;
virtual Mat getDefaultSubstValues() const = 0;
virtual int getCatCount(int vi) const = 0;
/** @brief Returns the vector of class labels
The function returns vector of unique labels occurred in the responses.
*/
virtual Mat getClassLabels() const = 0;
virtual Mat getCatOfs() const = 0;
virtual Mat getCatMap() const = 0;
/** @brief Splits the training data into the training and test parts
@sa TrainData::setTrainTestSplitRatio
*/
virtual void setTrainTestSplit(int count, bool shuffle=true) = 0;
/** @brief Splits the training data into the training and test parts
The function selects a subset of specified relative size and then returns it as the training
set. If the function is not called, all the data is used for training. Please, note that for
each of TrainData::getTrain\* there is corresponding TrainData::getTest\*, so that the test
subset can be retrieved and processed as well.
@sa TrainData::setTrainTestSplit
*/
virtual void setTrainTestSplitRatio(double ratio, bool shuffle=true) = 0;
virtual void shuffleTrainTest() = 0;
static Mat getSubVector(const Mat& vec, const Mat& idx);
/** @brief Reads the dataset from a .csv file and returns the ready-to-use training data.
@param filename The input file name
@param headerLineCount The number of lines in the beginning to skip; besides the header, the
function also skips empty lines and lines staring with `#`
@param responseStartIdx Index of the first output variable. If -1, the function considers the
last variable as the response
@param responseEndIdx Index of the last output variable + 1. If -1, then there is single
response variable at responseStartIdx.
@param varTypeSpec The optional text string that specifies the variables' types. It has the
format `ord[n1-n2,n3,n4-n5,...]cat[n6,n7-n8,...]`. That is, variables from `n1 to n2`
(inclusive range), `n3`, `n4 to n5` ... are considered ordered and `n6`, `n7 to n8` ... are
considered as categorical. The range `[n1..n2] + [n3] + [n4..n5] + ... + [n6] + [n7..n8]`
should cover all the variables. If varTypeSpec is not specified, then algorithm uses the
following rules:
- all input variables are considered ordered by default. If some column contains has non-
numerical values, e.g. 'apple', 'pear', 'apple', 'apple', 'mango', the corresponding
variable is considered categorical.
- if there are several output variables, they are all considered as ordered. Error is
reported when non-numerical values are used.
- if there is a single output variable, then if its values are non-numerical or are all
integers, then it's considered categorical. Otherwise, it's considered ordered.
@param delimiter The character used to separate values in each line.
@param missch The character used to specify missing measurements. It should not be a digit.
Although it's a non-numerical value, it surely does not affect the decision of whether the
variable ordered or categorical.
*/
static Ptr<TrainData> loadFromCSV(const String& filename,
int headerLineCount,
int responseStartIdx=-1,
int responseEndIdx=-1,
const String& varTypeSpec=String(),
char delimiter=',',
char missch='?');
/** @brief Creates training data from in-memory arrays.
@param samples matrix of samples. It should have CV_32F type.
@param layout see ml::SampleTypes.
@param responses matrix of responses. If the responses are scalar, they should be stored as a
single row or as a single column. The matrix should have type CV_32F or CV_32S (in the
former case the responses are considered as ordered by default; in the latter case - as
categorical)
@param varIdx vector specifying which variables to use for training. It can be an integer vector
(CV_32S) containing 0-based variable indices or byte vector (CV_8U) containing a mask of
active variables.
@param sampleIdx vector specifying which samples to use for training. It can be an integer
vector (CV_32S) containing 0-based sample indices or byte vector (CV_8U) containing a mask
of training samples.
@param sampleWeights optional vector with weights for each sample. It should have CV_32F type.
@param varType optional vector of type CV_8U and size `<number_of_variables_in_samples> +
<number_of_variables_in_responses>`, containing types of each input and output variable. See
ml::VariableTypes.
*/
static Ptr<TrainData> create(InputArray samples, int layout, InputArray responses,
InputArray varIdx=noArray(), InputArray sampleIdx=noArray(),
InputArray sampleWeights=noArray(), InputArray varType=noArray());
};
/** @brief Base class for statistical models in OpenCV ML.
*/
class CV_EXPORTS_W StatModel : public Algorithm
{
public:
/** Predict options */
enum Flags {
UPDATE_MODEL = 1,
RAW_OUTPUT=1, //!< makes the method return the raw results (the sum), not the class label
COMPRESSED_INPUT=2,
PREPROCESSED_INPUT=4
};
virtual void clear();
/** @brief Returns the number of variables in training samples */
virtual int getVarCount() const = 0;
/** @brief Returns true if the model is trained */
virtual bool isTrained() const = 0;
/** @brief Returns true if the model is classifier */
virtual bool isClassifier() const = 0;
/** @brief Trains the statistical model
@param trainData training data that can be loaded from file using TrainData::loadFromCSV or
created with TrainData::create.
@param flags optional flags, depending on the model. Some of the models can be updated with the
new training samples, not completely overwritten (such as NormalBayesClassifier or ANN_MLP).
*/
virtual bool train( const Ptr<TrainData>& trainData, int flags=0 );
/** @brief Trains the statistical model
@param samples training samples
@param layout See ml::SampleTypes.
@param responses vector of responses associated with the training samples.
*/
virtual bool train( InputArray samples, int layout, InputArray responses );
/** @brief Computes error on the training or test dataset
@param data the training data
@param test if true, the error is computed over the test subset of the data, otherwise it's
computed over the training subset of the data. Please note that if you loaded a completely
different dataset to evaluate already trained classifier, you will probably want not to set
the test subset at all with TrainData::setTrainTestSplitRatio and specify test=false, so
that the error is computed for the whole new set. Yes, this sounds a bit confusing.
@param resp the optional output responses.
The method uses StatModel::predict to compute the error. For regression models the error is
computed as RMS, for classifiers - as a percent of missclassified samples (0%-100%).
*/
virtual float calcError( const Ptr<TrainData>& data, bool test, OutputArray resp ) const;
/** @brief Predicts response(s) for the provided sample(s)
@param samples The input samples, floating-point matrix
@param results The optional output matrix of results.
@param flags The optional flags, model-dependent. See cv::ml::StatModel::Flags.
*/
virtual float predict( InputArray samples, OutputArray results=noArray(), int flags=0 ) const = 0;
/** @brief Loads model from the file
This is static template method of StatModel. It's usage is following (in the case of SVM):
@code
Ptr<SVM> svm = StatModel::load<SVM>("my_svm_model.xml");
@endcode
In order to make this method work, the derived class must overwrite Algorithm::read(const
FileNode& fn).
*/
template<typename _Tp> static Ptr<_Tp> load(const String& filename)
{
FileStorage fs(filename, FileStorage::READ);
Ptr<_Tp> model = _Tp::create();
model->read(fs.getFirstTopLevelNode());
return model->isTrained() ? model : Ptr<_Tp>();
}
/** @brief Loads model from a String
@param strModel The string variable containing the model you want to load.
This is static template method of StatModel. It's usage is following (in the case of SVM):
@code
Ptr<SVM> svm = StatModel::loadFromString<SVM>(myStringModel);
@endcode
*/
template<typename _Tp> static Ptr<_Tp> loadFromString(const String& strModel)
{
FileStorage fs(strModel, FileStorage::READ + FileStorage::MEMORY);
Ptr<_Tp> model = _Tp::create();
model->read(fs.getFirstTopLevelNode());
return model->isTrained() ? model : Ptr<_Tp>();
}
/** @brief Create and train model with default parameters
The class must implement static `create()` method with no parameters or with all default parameter values
*/
template<typename _Tp> static Ptr<_Tp> train(const Ptr<TrainData>& data, int flags=0)
{
Ptr<_Tp> model = _Tp::create();
return !model.empty() && model->train(data, flags) ? model : Ptr<_Tp>();
}
/** Saves the model to a file.
In order to make this method work, the derived class must implement Algorithm::write(FileStorage& fs). */
virtual void save(const String& filename) const;
/** Returns model string identifier.
This string is used as top level xml/yml node tag when model is saved to a file or string. */
virtual String getDefaultModelName() const = 0;
};
/****************************************************************************************\
* Normal Bayes Classifier *
\****************************************************************************************/
/** @brief Bayes classifier for normally distributed data.
@sa @ref ml_intro_bayes
*/
class CV_EXPORTS_W NormalBayesClassifier : public StatModel
{
public:
/** @brief Predicts the response for sample(s).
The method estimates the most probable classes for input vectors. Input vectors (one or more)
are stored as rows of the matrix inputs. In case of multiple input vectors, there should be one
output vector outputs. The predicted class for a single input vector is returned by the method.
The vector outputProbs contains the output probabilities corresponding to each element of
result.
*/
virtual float predictProb( InputArray inputs, OutputArray outputs,
OutputArray outputProbs, int flags=0 ) const = 0;
/** Creates empty model
Use StatModel::train to train the model after creation. */
static Ptr<NormalBayesClassifier> create();
};
/****************************************************************************************\
* K-Nearest Neighbour Classifier *
\****************************************************************************************/
/** @brief The class implements K-Nearest Neighbors model
@sa @ref ml_intro_knn
*/
class CV_EXPORTS_W KNearest : public StatModel
{
public:
/** Default number of neighbors to use in predict method. */
CV_PURE_PROPERTY(int, DefaultK)
/** Whether classification or regression model should be trained. */
CV_PURE_PROPERTY(bool, IsClassifier)
/** Parameter for KDTree implementation. */
CV_PURE_PROPERTY(int, Emax)
/** %Algorithm type, one of KNearest::Types. */
CV_PURE_PROPERTY(int, AlgorithmType)
/** @brief Finds the neighbors and predicts responses for input vectors.
@param samples Input samples stored by rows. It is a single-precision floating-point matrix of
`<number_of_samples> * k` size.
@param k Number of used nearest neighbors. Should be greater than 1.
@param results Vector with results of prediction (regression or classification) for each input
sample. It is a single-precision floating-point vector with `<number_of_samples>` elements.
@param neighborResponses Optional output values for corresponding neighbors. It is a single-
precision floating-point matrix of `<number_of_samples> * k` size.
@param dist Optional output distances from the input vectors to the corresponding neighbors. It
is a single-precision floating-point matrix of `<number_of_samples> * k` size.
For each input vector (a row of the matrix samples), the method finds the k nearest neighbors.
In case of regression, the predicted result is a mean value of the particular vector's neighbor
responses. In case of classification, the class is determined by voting.
For each input vector, the neighbors are sorted by their distances to the vector.
In case of C++ interface you can use output pointers to empty matrices and the function will
allocate memory itself.
If only a single input vector is passed, all output matrices are optional and the predicted
value is returned by the method.
The function is parallelized with the TBB library.
*/
virtual float findNearest( InputArray samples, int k,
OutputArray results,
OutputArray neighborResponses=noArray(),
OutputArray dist=noArray() ) const = 0;
/** @brief Implementations of KNearest algorithm
*/
enum Types
{
BRUTE_FORCE=1,
KDTREE=2
};
/** @brief Creates the empty model
The static method creates empty %KNearest classifier. It should be then trained using StatModel::train method.
*/
static Ptr<KNearest> create();
};
/****************************************************************************************\
* Support Vector Machines *
\****************************************************************************************/
/** @brief Support Vector Machines.
@sa @ref ml_intro_svm
*/
class CV_EXPORTS_W SVM : public StatModel
{
public:
class CV_EXPORTS Kernel : public Algorithm
{
public:
virtual int getType() const = 0;
virtual void calc( int vcount, int n, const float* vecs, const float* another, float* results ) = 0;
};
/** Type of a %SVM formulation.
See SVM::Types. Default value is SVM::C_SVC. */
CV_PURE_PROPERTY(int, Type)
/** Parameter \f$\gamma\f$ of a kernel function.
For SVM::POLY, SVM::RBF, SVM::SIGMOID or SVM::CHI2. Default value is 1. */
CV_PURE_PROPERTY(double, Gamma)
/** Parameter _coef0_ of a kernel function.
For SVM::POLY or SVM::SIGMOID. Default value is 0.*/
CV_PURE_PROPERTY(double, Coef0)
/** Parameter _degree_ of a kernel function.
For SVM::POLY. Default value is 0. */
CV_PURE_PROPERTY(double, Degree)
/** Parameter _C_ of a %SVM optimization problem.
For SVM::C_SVC, SVM::EPS_SVR or SVM::NU_SVR. Default value is 0. */
CV_PURE_PROPERTY(double, C)
/** Parameter \f$\nu\f$ of a %SVM optimization problem.
For SVM::NU_SVC, SVM::ONE_CLASS or SVM::NU_SVR. Default value is 0. */
CV_PURE_PROPERTY(double, Nu)
/** Parameter \f$\epsilon\f$ of a %SVM optimization problem.
For SVM::EPS_SVR. Default value is 0. */
CV_PURE_PROPERTY(double, P)
/** Optional weights in the SVM::C_SVC problem, assigned to particular classes.
They are multiplied by _C_ so the parameter _C_ of class _i_ becomes `classWeights(i) * C`. Thus
these weights affect the misclassification penalty for different classes. The larger weight,
the larger penalty on misclassification of data from the corresponding class. Default value is
empty Mat. */
CV_PURE_PROPERTY_S(cv::Mat, ClassWeights)
/** Termination criteria of the iterative %SVM training procedure which solves a partial
case of constrained quadratic optimization problem.
You can specify tolerance and/or the maximum number of iterations. Default value is
`TermCriteria( TermCriteria::MAX_ITER + TermCriteria::EPS, 1000, FLT_EPSILON )`; */
CV_PURE_PROPERTY_S(cv::TermCriteria, TermCriteria)
/** Type of a %SVM kernel.
See SVM::KernelTypes. Default value is SVM::RBF. */
virtual int getKernelType() const = 0;
/** Initialize with one of predefined kernels.
See SVM::KernelTypes. */
virtual void setKernel(int kernelType) = 0;
/** Initialize with custom kernel.
See SVM::Kernel class for implementation details */
virtual void setCustomKernel(const Ptr<Kernel> &_kernel) = 0;
//! %SVM type
enum Types {
/** C-Support Vector Classification. n-class classification (n \f$\geq\f$ 2), allows
imperfect separation of classes with penalty multiplier C for outliers. */
C_SVC=100,
/** \f$\nu\f$-Support Vector Classification. n-class classification with possible
imperfect separation. Parameter \f$\nu\f$ (in the range 0..1, the larger the value, the smoother
the decision boundary) is used instead of C. */
NU_SVC=101,
/** Distribution Estimation (One-class %SVM). All the training data are from
the same class, %SVM builds a boundary that separates the class from the rest of the feature
space. */
ONE_CLASS=102,
/** \f$\epsilon\f$-Support Vector Regression. The distance between feature vectors
from the training set and the fitting hyper-plane must be less than p. For outliers the
penalty multiplier C is used. */
EPS_SVR=103,
/** \f$\nu\f$-Support Vector Regression. \f$\nu\f$ is used instead of p.
See @cite LibSVM for details. */
NU_SVR=104
};
/** @brief %SVM kernel type
A comparison of different kernels on the following 2D test case with four classes. Four
SVM::C_SVC SVMs have been trained (one against rest) with auto_train. Evaluation on three
different kernels (SVM::CHI2, SVM::INTER, SVM::RBF). The color depicts the class with max score.
Bright means max-score \> 0, dark means max-score \< 0.
![image](pics/SVM_Comparison.png)
*/
enum KernelTypes {
/** Returned by SVM::getKernelType in case when custom kernel has been set */
CUSTOM=-1,
/** Linear kernel. No mapping is done, linear discrimination (or regression) is
done in the original feature space. It is the fastest option. \f$K(x_i, x_j) = x_i^T x_j\f$. */
LINEAR=0,
/** Polynomial kernel:
\f$K(x_i, x_j) = (\gamma x_i^T x_j + coef0)^{degree}, \gamma > 0\f$. */
POLY=1,
/** Radial basis function (RBF), a good choice in most cases.
\f$K(x_i, x_j) = e^{-\gamma ||x_i - x_j||^2}, \gamma > 0\f$. */
RBF=2,
/** Sigmoid kernel: \f$K(x_i, x_j) = \tanh(\gamma x_i^T x_j + coef0)\f$. */
SIGMOID=3,
/** Exponential Chi2 kernel, similar to the RBF kernel:
\f$K(x_i, x_j) = e^{-\gamma \chi^2(x_i,x_j)}, \chi^2(x_i,x_j) = (x_i-x_j)^2/(x_i+x_j), \gamma > 0\f$. */
CHI2=4,
/** Histogram intersection kernel. A fast kernel. \f$K(x_i, x_j) = min(x_i,x_j)\f$. */
INTER=5
};
//! %SVM params type
enum ParamTypes {
C=0,
GAMMA=1,
P=2,
NU=3,
COEF=4,
DEGREE=5
};
/** @brief Trains an %SVM with optimal parameters.
@param data the training data that can be constructed using TrainData::create or
TrainData::loadFromCSV.
@param kFold Cross-validation parameter. The training set is divided into kFold subsets. One
subset is used to test the model, the others form the train set. So, the %SVM algorithm is
executed kFold times.
@param Cgrid grid for C
@param gammaGrid grid for gamma
@param pGrid grid for p
@param nuGrid grid for nu
@param coeffGrid grid for coeff
@param degreeGrid grid for degree
@param balanced If true and the problem is 2-class classification then the method creates more
balanced cross-validation subsets that is proportions between classes in subsets are close
to such proportion in the whole train dataset.
The method trains the %SVM model automatically by choosing the optimal parameters C, gamma, p,
nu, coef0, degree. Parameters are considered optimal when the cross-validation
estimate of the test set error is minimal.
If there is no need to optimize a parameter, the corresponding grid step should be set to any
value less than or equal to 1. For example, to avoid optimization in gamma, set `gammaGrid.step
= 0`, `gammaGrid.minVal`, `gamma_grid.maxVal` as arbitrary numbers. In this case, the value
`Gamma` is taken for gamma.
And, finally, if the optimization in a parameter is required but the corresponding grid is
unknown, you may call the function SVM::getDefaultGrid. To generate a grid, for example, for
gamma, call `SVM::getDefaultGrid(SVM::GAMMA)`.
This function works for the classification (SVM::C_SVC or SVM::NU_SVC) as well as for the
regression (SVM::EPS_SVR or SVM::NU_SVR). If it is SVM::ONE_CLASS, no optimization is made and
the usual %SVM with parameters specified in params is executed.
*/
virtual bool trainAuto( const Ptr<TrainData>& data, int kFold = 10,
ParamGrid Cgrid = SVM::getDefaultGrid(SVM::C),
ParamGrid gammaGrid = SVM::getDefaultGrid(SVM::GAMMA),
ParamGrid pGrid = SVM::getDefaultGrid(SVM::P),
ParamGrid nuGrid = SVM::getDefaultGrid(SVM::NU),
ParamGrid coeffGrid = SVM::getDefaultGrid(SVM::COEF),
ParamGrid degreeGrid = SVM::getDefaultGrid(SVM::DEGREE),
bool balanced=false) = 0;
/** @brief Retrieves all the support vectors
The method returns all the support vector as floating-point matrix, where support vectors are
stored as matrix rows.
*/
CV_WRAP virtual Mat getSupportVectors() const = 0;
/** @brief Retrieves the decision function
@param i the index of the decision function. If the problem solved is regression, 1-class or
2-class classification, then there will be just one decision function and the index should
always be 0. Otherwise, in the case of N-class classification, there will be \f$N(N-1)/2\f$
decision functions.
@param alpha the optional output vector for weights, corresponding to different support vectors.
In the case of linear %SVM all the alpha's will be 1's.
@param svidx the optional output vector of indices of support vectors within the matrix of
support vectors (which can be retrieved by SVM::getSupportVectors). In the case of linear
%SVM each decision function consists of a single "compressed" support vector.
The method returns rho parameter of the decision function, a scalar subtracted from the weighted
sum of kernel responses.
*/
virtual double getDecisionFunction(int i, OutputArray alpha, OutputArray svidx) const = 0;
/** @brief Generates a grid for %SVM parameters.
@param param_id %SVM parameters IDs that must be one of the SVM::ParamTypes. The grid is
generated for the parameter with this ID.
The function generates a grid for the specified parameter of the %SVM algorithm. The grid may be
passed to the function SVM::trainAuto.
*/
static ParamGrid getDefaultGrid( int param_id );
/** Creates empty model.
Use StatModel::train to train the model. Since %SVM has several parameters, you may want to
find the best parameters for your problem, it can be done with SVM::trainAuto. */
static Ptr<SVM> create();
};
/****************************************************************************************\
* Expectation - Maximization *
\****************************************************************************************/
/** @brief The class implements the Expectation Maximization algorithm.
@sa @ref ml_intro_em
*/
class CV_EXPORTS_W EM : public StatModel
{
public:
//! Type of covariation matrices
enum Types {
/** A scaled identity matrix \f$\mu_k * I\f$. There is the only
parameter \f$\mu_k\f$ to be estimated for each matrix. The option may be used in special cases,
when the constraint is relevant, or as a first step in the optimization (for example in case
when the data is preprocessed with PCA). The results of such preliminary estimation may be
passed again to the optimization procedure, this time with
covMatType=EM::COV_MAT_DIAGONAL. */
COV_MAT_SPHERICAL=0,
/** A diagonal matrix with positive diagonal elements. The number of
free parameters is d for each matrix. This is most commonly used option yielding good
estimation results. */
COV_MAT_DIAGONAL=1,
/** A symmetric positively defined matrix. The number of free
parameters in each matrix is about \f$d^2/2\f$. It is not recommended to use this option, unless
there is pretty accurate initial estimation of the parameters and/or a huge number of
training samples. */
COV_MAT_GENERIC=2,
COV_MAT_DEFAULT=COV_MAT_DIAGONAL
};
//! Default parameters
enum {DEFAULT_NCLUSTERS=5, DEFAULT_MAX_ITERS=100};
//! The initial step
enum {START_E_STEP=1, START_M_STEP=2, START_AUTO_STEP=0};
/** The number of mixture components in the Gaussian mixture model.
Default value of the parameter is EM::DEFAULT_NCLUSTERS=5. Some of %EM implementation could
determine the optimal number of mixtures within a specified value range, but that is not the
case in ML yet. */
CV_PURE_PROPERTY(int, ClustersNumber)
/** Constraint on covariance matrices which defines type of matrices.
See EM::Types. */
CV_PURE_PROPERTY(int, CovarianceMatrixType)
/** The termination criteria of the %EM algorithm.
The %EM algorithm can be terminated by the number of iterations termCrit.maxCount (number of
M-steps) or when relative change of likelihood logarithm is less than termCrit.epsilon. Default
maximum number of iterations is EM::DEFAULT_MAX_ITERS=100. */
CV_PURE_PROPERTY_S(TermCriteria, TermCriteria)
/** @brief Returns weights of the mixtures
Returns vector with the number of elements equal to the number of mixtures.
*/
virtual Mat getWeights() const = 0;
/** @brief Returns the cluster centers (means of the Gaussian mixture)
Returns matrix with the number of rows equal to the number of mixtures and number of columns
equal to the space dimensionality.
*/
virtual Mat getMeans() const = 0;
/** @brief Returns covariation matrices
Returns vector of covariation matrices. Number of matrices is the number of gaussian mixtures,
each matrix is a square floating-point matrix NxN, where N is the space dimensionality.
*/
virtual void getCovs(std::vector<Mat>& covs) const = 0;
/** @brief Returns a likelihood logarithm value and an index of the most probable mixture component
for the given sample.
@param sample A sample for classification. It should be a one-channel matrix of
\f$1 \times dims\f$ or \f$dims \times 1\f$ size.
@param probs Optional output matrix that contains posterior probabilities of each component
given the sample. It has \f$1 \times nclusters\f$ size and CV_64FC1 type.
The method returns a two-element double vector. Zero element is a likelihood logarithm value for
the sample. First element is an index of the most probable mixture component for the given
sample.
*/
CV_WRAP virtual Vec2d predict2(InputArray sample, OutputArray probs) const = 0;
/** @brief Estimate the Gaussian mixture parameters from a samples set.
This variation starts with Expectation step. Initial values of the model parameters will be
estimated by the k-means algorithm.
Unlike many of the ML models, %EM is an unsupervised learning algorithm and it does not take
responses (class labels or function values) as input. Instead, it computes the *Maximum
Likelihood Estimate* of the Gaussian mixture parameters from an input sample set, stores all the
parameters inside the structure: \f$p_{i,k}\f$ in probs, \f$a_k\f$ in means , \f$S_k\f$ in
covs[k], \f$\pi_k\f$ in weights , and optionally computes the output "class label" for each
sample: \f$\texttt{labels}_i=\texttt{arg max}_k(p_{i,k}), i=1..N\f$ (indices of the most
probable mixture component for each sample).
The trained model can be used further for prediction, just like any other classifier. The
trained model is similar to the NormalBayesClassifier.
@param samples Samples from which the Gaussian mixture model will be estimated. It should be a
one-channel matrix, each row of which is a sample. If the matrix does not have CV_64F type
it will be converted to the inner matrix of such type for the further computing.
@param logLikelihoods The optional output matrix that contains a likelihood logarithm value for
each sample. It has \f$nsamples \times 1\f$ size and CV_64FC1 type.
@param labels The optional output "class label" for each sample:
\f$\texttt{labels}_i=\texttt{arg max}_k(p_{i,k}), i=1..N\f$ (indices of the most probable
mixture component for each sample). It has \f$nsamples \times 1\f$ size and CV_32SC1 type.
@param probs The optional output matrix that contains posterior probabilities of each Gaussian
mixture component given the each sample. It has \f$nsamples \times nclusters\f$ size and
CV_64FC1 type.
*/
virtual bool trainEM(InputArray samples,
OutputArray logLikelihoods=noArray(),
OutputArray labels=noArray(),
OutputArray probs=noArray()) = 0;
/** @brief Estimate the Gaussian mixture parameters from a samples set.
This variation starts with Expectation step. You need to provide initial means \f$a_k\f$ of
mixture components. Optionally you can pass initial weights \f$\pi_k\f$ and covariance matrices
\f$S_k\f$ of mixture components.
@param samples Samples from which the Gaussian mixture model will be estimated. It should be a
one-channel matrix, each row of which is a sample. If the matrix does not have CV_64F type
it will be converted to the inner matrix of such type for the further computing.
@param means0 Initial means \f$a_k\f$ of mixture components. It is a one-channel matrix of
\f$nclusters \times dims\f$ size. If the matrix does not have CV_64F type it will be
converted to the inner matrix of such type for the further computing.
@param covs0 The vector of initial covariance matrices \f$S_k\f$ of mixture components. Each of
covariance matrices is a one-channel matrix of \f$dims \times dims\f$ size. If the matrices
do not have CV_64F type they will be converted to the inner matrices of such type for the
further computing.
@param weights0 Initial weights \f$\pi_k\f$ of mixture components. It should be a one-channel
floating-point matrix with \f$1 \times nclusters\f$ or \f$nclusters \times 1\f$ size.
@param logLikelihoods The optional output matrix that contains a likelihood logarithm value for
each sample. It has \f$nsamples \times 1\f$ size and CV_64FC1 type.
@param labels The optional output "class label" for each sample:
\f$\texttt{labels}_i=\texttt{arg max}_k(p_{i,k}), i=1..N\f$ (indices of the most probable
mixture component for each sample). It has \f$nsamples \times 1\f$ size and CV_32SC1 type.
@param probs The optional output matrix that contains posterior probabilities of each Gaussian
mixture component given the each sample. It has \f$nsamples \times nclusters\f$ size and
CV_64FC1 type.
*/
virtual bool trainE(InputArray samples, InputArray means0,
InputArray covs0=noArray(),
InputArray weights0=noArray(),
OutputArray logLikelihoods=noArray(),
OutputArray labels=noArray(),
OutputArray probs=noArray()) = 0;
/** @brief Estimate the Gaussian mixture parameters from a samples set.
This variation starts with Maximization step. You need to provide initial probabilities
\f$p_{i,k}\f$ to use this option.
@param samples Samples from which the Gaussian mixture model will be estimated. It should be a
one-channel matrix, each row of which is a sample. If the matrix does not have CV_64F type
it will be converted to the inner matrix of such type for the further computing.
@param probs0
@param logLikelihoods The optional output matrix that contains a likelihood logarithm value for
each sample. It has \f$nsamples \times 1\f$ size and CV_64FC1 type.
@param labels The optional output "class label" for each sample:
\f$\texttt{labels}_i=\texttt{arg max}_k(p_{i,k}), i=1..N\f$ (indices of the most probable
mixture component for each sample). It has \f$nsamples \times 1\f$ size and CV_32SC1 type.
@param probs The optional output matrix that contains posterior probabilities of each Gaussian
mixture component given the each sample. It has \f$nsamples \times nclusters\f$ size and
CV_64FC1 type.
*/
virtual bool trainM(InputArray samples, InputArray probs0,
OutputArray logLikelihoods=noArray(),
OutputArray labels=noArray(),
OutputArray probs=noArray()) = 0;
/** Creates empty %EM model.
The model should be trained then using StatModel::train(traindata, flags) method. Alternatively, you
can use one of the EM::train\* methods or load it from file using StatModel::load\<EM\>(filename).
*/
static Ptr<EM> create();
};
/****************************************************************************************\
* Decision Tree *
\****************************************************************************************/
/** @brief The class represents a single decision tree or a collection of decision trees.
The current public interface of the class allows user to train only a single decision tree, however
the class is capable of storing multiple decision trees and using them for prediction (by summing
responses or using a voting schemes), and the derived from DTrees classes (such as RTrees and Boost)
use this capability to implement decision tree ensembles.
@sa @ref ml_intro_trees
*/
class CV_EXPORTS_W DTrees : public StatModel
{
public:
/** Predict options */
enum Flags { PREDICT_AUTO=0, PREDICT_SUM=(1<<8), PREDICT_MAX_VOTE=(2<<8), PREDICT_MASK=(3<<8) };
/** Cluster possible values of a categorical variable into K\<=maxCategories clusters to
find a suboptimal split.
If a discrete variable, on which the training procedure tries to make a split, takes more than
maxCategories values, the precise best subset estimation may take a very long time because the
algorithm is exponential. Instead, many decision trees engines (including our implementation)
try to find sub-optimal split in this case by clustering all the samples into maxCategories
clusters that is some categories are merged together. The clustering is applied only in n \>
2-class classification problems for categorical variables with N \> max_categories possible
values. In case of regression and 2-class classification the optimal split can be found
efficiently without employing clustering, thus the parameter is not used in these cases.
Default value is 10.*/
CV_PURE_PROPERTY(int, MaxCategories)
/** The maximum possible depth of the tree.
That is the training algorithms attempts to split a node while its depth is less than maxDepth.
The root node has zero depth. The actual depth may be smaller if the other termination criteria
are met (see the outline of the training procedure @ref ml_intro_trees "here"), and/or if the
tree is pruned. Default value is INT_MAX.*/
CV_PURE_PROPERTY(int, MaxDepth)
/** If the number of samples in a node is less than this parameter then the node will not be split.
Default value is 10.*/
CV_PURE_PROPERTY(int, MinSampleCount)
/** If CVFolds \> 1 then algorithms prunes the built decision tree using K-fold
cross-validation procedure where K is equal to CVFolds.
Default value is 10.*/
CV_PURE_PROPERTY(int, CVFolds)
/** If true then surrogate splits will be built.
These splits allow to work with missing data and compute variable importance correctly.
Default value is false.
@note currently it's not implemented.*/
CV_PURE_PROPERTY(bool, UseSurrogates)
/** If true then a pruning will be harsher.
This will make a tree more compact and more resistant to the training data noise but a bit less
accurate. Default value is true.*/
CV_PURE_PROPERTY(bool, Use1SERule)
/** If true then pruned branches are physically removed from the tree.
Otherwise they are retained and it is possible to get results from the original unpruned (or
pruned less aggressively) tree. Default value is true.*/
CV_PURE_PROPERTY(bool, TruncatePrunedTree)
/** Termination criteria for regression trees.
If all absolute differences between an estimated value in a node and values of train samples
in this node are less than this parameter then the node will not be split further. Default
value is 0.01f*/
CV_PURE_PROPERTY(float, RegressionAccuracy)
/** @brief The array of a priori class probabilities, sorted by the class label value.
The parameter can be used to tune the decision tree preferences toward a certain class. For
example, if you want to detect some rare anomaly occurrence, the training base will likely
contain much more normal cases than anomalies, so a very good classification performance
will be achieved just by considering every case as normal. To avoid this, the priors can be
specified, where the anomaly probability is artificially increased (up to 0.5 or even
greater), so the weight of the misclassified anomalies becomes much bigger, and the tree is
adjusted properly.
You can also think about this parameter as weights of prediction categories which determine
relative weights that you give to misclassification. That is, if the weight of the first
category is 1 and the weight of the second category is 10, then each mistake in predicting
the second category is equivalent to making 10 mistakes in predicting the first category.
Default value is empty Mat.*/
CV_PURE_PROPERTY_S(cv::Mat, Priors)
/** @brief The class represents a decision tree node.
*/
class CV_EXPORTS Node
{
public:
Node();
double value; //!< Value at the node: a class label in case of classification or estimated
//!< function value in case of regression.
int classIdx; //!< Class index normalized to 0..class_count-1 range and assigned to the
//!< node. It is used internally in classification trees and tree ensembles.
int parent; //!< Index of the parent node
int left; //!< Index of the left child node
int right; //!< Index of right child node
int defaultDir; //!< Default direction where to go (-1: left or +1: right). It helps in the
//!< case of missing values.
int split; //!< Index of the first split
};
/** @brief The class represents split in a decision tree.
*/
class CV_EXPORTS Split
{
public:
Split();
int varIdx; //!< Index of variable on which the split is created.
bool inversed; //!< If true, then the inverse split rule is used (i.e. left and right
//!< branches are exchanged in the rule expressions below).
float quality; //!< The split quality, a positive number. It is used to choose the best split.
int next; //!< Index of the next split in the list of splits for the node
float c; /**< The threshold value in case of split on an ordered variable.
The rule is:
@code{.none}
if var_value < c
then next_node <- left
else next_node <- right
@endcode */
int subsetOfs; /**< Offset of the bitset used by the split on a categorical variable.
The rule is:
@code{.none}
if bitset[var_value] == 1
then next_node <- left
else next_node <- right
@endcode */
};
/** @brief Returns indices of root nodes
*/
virtual const std::vector<int>& getRoots() const = 0;
/** @brief Returns all the nodes
all the node indices are indices in the returned vector
*/
virtual const std::vector<Node>& getNodes() const = 0;
/** @brief Returns all the splits
all the split indices are indices in the returned vector
*/
virtual const std::vector<Split>& getSplits() const = 0;
/** @brief Returns all the bitsets for categorical splits
Split::subsetOfs is an offset in the returned vector
*/
virtual const std::vector<int>& getSubsets() const = 0;
/** @brief Creates the empty model
The static method creates empty decision tree with the specified parameters. It should be then
trained using train method (see StatModel::train). Alternatively, you can load the model from
file using StatModel::load\<DTrees\>(filename).
*/
static Ptr<DTrees> create();
};
/****************************************************************************************\
* Random Trees Classifier *
\****************************************************************************************/
/** @brief The class implements the random forest predictor.
@sa @ref ml_intro_rtrees
*/
class CV_EXPORTS_W RTrees : public DTrees
{
public:
/** If true then variable importance will be calculated and then it can be retrieved by RTrees::getVarImportance.
Default value is false.*/
CV_PURE_PROPERTY(bool, CalculateVarImportance)
/** The size of the randomly selected subset of features at each tree node and that are used
to find the best split(s).
If you set it to 0 then the size will be set to the square root of the total number of
features. Default value is 0.*/
CV_PURE_PROPERTY(int, ActiveVarCount)
/** The termination criteria that specifies when the training algorithm stops.
Either when the specified number of trees is trained and added to the ensemble or when
sufficient accuracy (measured as OOB error) is achieved. Typically the more trees you have the
better the accuracy. However, the improvement in accuracy generally diminishes and asymptotes
pass a certain number of trees. Also to keep in mind, the number of tree increases the
prediction time linearly. Default value is TermCriteria(TermCriteria::MAX_ITERS +
TermCriteria::EPS, 50, 0.1)*/
CV_PURE_PROPERTY_S(TermCriteria, TermCriteria)
/** Returns the variable importance array.
The method returns the variable importance vector, computed at the training stage when
CalculateVarImportance is set to true. If this flag was set to false, the empty matrix is
returned.
*/
virtual Mat getVarImportance() const = 0;
/** Creates the empty model.
Use StatModel::train to train the model, StatModel::train to create and train the model,
StatModel::load to load the pre-trained model.
*/
static Ptr<RTrees> create();
};
/****************************************************************************************\
* Boosted tree classifier *
\****************************************************************************************/
/** @brief Boosted tree classifier derived from DTrees
@sa @ref ml_intro_boost
*/
class CV_EXPORTS_W Boost : public DTrees
{
public:
/** Type of the boosting algorithm.
See Boost::Types. Default value is Boost::REAL. */
CV_PURE_PROPERTY(int, BoostType)
/** The number of weak classifiers.
Default value is 100. */
CV_PURE_PROPERTY(int, WeakCount)
/** A threshold between 0 and 1 used to save computational time.
Samples with summary weight \f$\leq 1 - weight_trim_rate\f$ do not participate in the *next*
iteration of training. Set this parameter to 0 to turn off this functionality. Default value is 0.95.*/
CV_PURE_PROPERTY(double, WeightTrimRate)
/** Boosting type.
Gentle AdaBoost and Real AdaBoost are often the preferable choices. */
enum Types {
DISCRETE=0, //!< Discrete AdaBoost.
REAL=1, //!< Real AdaBoost. It is a technique that utilizes confidence-rated predictions
//!< and works well with categorical data.
LOGIT=2, //!< LogitBoost. It can produce good regression fits.
GENTLE=3 //!< Gentle AdaBoost. It puts less weight on outlier data points and for that
//!<reason is often good with regression data.
};
/** Creates the empty model.
Use StatModel::train to train the model, StatModel::load\<Boost\>(filename) to load the pre-trained model. */
static Ptr<Boost> create();
};
/****************************************************************************************\
* Gradient Boosted Trees *
\****************************************************************************************/
/*class CV_EXPORTS_W GBTrees : public DTrees
{
public:
struct CV_EXPORTS_W_MAP Params : public DTrees::Params
{
CV_PROP_RW int weakCount;
CV_PROP_RW int lossFunctionType;
CV_PROP_RW float subsamplePortion;
CV_PROP_RW float shrinkage;
Params();
Params( int lossFunctionType, int weakCount, float shrinkage,
float subsamplePortion, int maxDepth, bool useSurrogates );
};
enum {SQUARED_LOSS=0, ABSOLUTE_LOSS, HUBER_LOSS=3, DEVIANCE_LOSS};
virtual void setK(int k) = 0;
virtual float predictSerial( InputArray samples,
OutputArray weakResponses, int flags) const = 0;
static Ptr<GBTrees> create(const Params& p);
};*/
/****************************************************************************************\
* Artificial Neural Networks (ANN) *
\****************************************************************************************/
/////////////////////////////////// Multi-Layer Perceptrons //////////////////////////////
/** @brief Artificial Neural Networks - Multi-Layer Perceptrons.
Unlike many other models in ML that are constructed and trained at once, in the MLP model these
steps are separated. First, a network with the specified topology is created using the non-default
constructor or the method ANN_MLP::create. All the weights are set to zeros. Then, the network is
trained using a set of input and output vectors. The training procedure can be repeated more than
once, that is, the weights can be adjusted based on the new training data.
Additional flags for StatModel::train are available: ANN_MLP::TrainFlags.
@sa @ref ml_intro_ann
*/
class CV_EXPORTS_W ANN_MLP : public StatModel
{
public:
/** Available training methods */
enum TrainingMethods {
BACKPROP=0, //!< The back-propagation algorithm.
RPROP=1 //!< The RPROP algorithm. See @cite RPROP93 for details.
};
/** Sets training method and common parameters.
@param method Default value is ANN_MLP::RPROP. See ANN_MLP::TrainingMethods.
@param param1 passed to setRpropDW0 for ANN_MLP::RPROP and to setBackpropWeightScale for ANN_MLP::BACKPROP
@param param2 passed to setRpropDWMin for ANN_MLP::RPROP and to setBackpropMomentumScale for ANN_MLP::BACKPROP.
*/
virtual void setTrainMethod(int method, double param1 = 0, double param2 = 0) = 0;
/** Returns current training method */
virtual int getTrainMethod() const = 0;
/** Initialize the activation function for each neuron.
Currently the default and the only fully supported activation function is ANN_MLP::SIGMOID_SYM.
@param type The type of activation function. See ANN_MLP::ActivationFunctions.
@param param1 The first parameter of the activation function, \f$\alpha\f$. Default value is 0.
@param param2 The second parameter of the activation function, \f$\beta\f$. Default value is 0.
*/
virtual void setActivationFunction(int type, double param1 = 0, double param2 = 0) = 0;
/** Integer vector specifying the number of neurons in each layer including the input and output layers.
The very first element specifies the number of elements in the input layer.
The last element - number of elements in the output layer. Default value is empty Mat.
@sa getLayerSizes */
virtual void setLayerSizes(InputArray _layer_sizes) = 0;
/** Integer vector specifying the number of neurons in each layer including the input and output layers.
The very first element specifies the number of elements in the input layer.
The last element - number of elements in the output layer.
@sa setLayerSizes */
virtual cv::Mat getLayerSizes() const = 0;
/** Termination criteria of the training algorithm.
You can specify the maximum number of iterations (maxCount) and/or how much the error could
change between the iterations to make the algorithm continue (epsilon). Default value is
TermCriteria(TermCriteria::MAX_ITER + TermCriteria::EPS, 1000, 0.01).*/
CV_PURE_PROPERTY(TermCriteria, TermCriteria)
/** BPROP: Strength of the weight gradient term.
The recommended value is about 0.1. Default value is 0.1.*/
CV_PURE_PROPERTY(double, BackpropWeightScale)
/** BPROP: Strength of the momentum term (the difference between weights on the 2 previous iterations).
This parameter provides some inertia to smooth the random fluctuations of the weights. It can
vary from 0 (the feature is disabled) to 1 and beyond. The value 0.1 or so is good enough.
Default value is 0.1.*/
CV_PURE_PROPERTY(double, BackpropMomentumScale)
/** RPROP: Initial value \f$\Delta_0\f$ of update-values \f$\Delta_{ij}\f$.
Default value is 0.1.*/
CV_PURE_PROPERTY(double, RpropDW0)
/** RPROP: Increase factor \f$\eta^+\f$.
It must be \>1. Default value is 1.2.*/
CV_PURE_PROPERTY(double, RpropDWPlus)
/** RPROP: Decrease factor \f$\eta^-\f$.
It must be \<1. Default value is 0.5.*/
CV_PURE_PROPERTY(double, RpropDWMinus)
/** RPROP: Update-values lower limit \f$\Delta_{min}\f$.
It must be positive. Default value is FLT_EPSILON.*/
CV_PURE_PROPERTY(double, RpropDWMin)
/** RPROP: Update-values upper limit \f$\Delta_{max}\f$.
It must be \>1. Default value is 50.*/
CV_PURE_PROPERTY(double, RpropDWMax)
/** possible activation functions */
enum ActivationFunctions {
/** Identity function: \f$f(x)=x\f$ */
IDENTITY = 0,
/** Symmetrical sigmoid: \f$f(x)=\beta*(1-e^{-\alpha x})/(1+e^{-\alpha x}\f$
@note
If you are using the default sigmoid activation function with the default parameter values
fparam1=0 and fparam2=0 then the function used is y = 1.7159\*tanh(2/3 \* x), so the output
will range from [-1.7159, 1.7159], instead of [0,1].*/
SIGMOID_SYM = 1,
/** Gaussian function: \f$f(x)=\beta e^{-\alpha x*x}\f$ */
GAUSSIAN = 2
};
/** Train options */
enum TrainFlags {
/** Update the network weights, rather than compute them from scratch. In the latter case
the weights are initialized using the Nguyen-Widrow algorithm. */
UPDATE_WEIGHTS = 1,
/** Do not normalize the input vectors. If this flag is not set, the training algorithm
normalizes each input feature independently, shifting its mean value to 0 and making the
standard deviation equal to 1. If the network is assumed to be updated frequently, the new
training data could be much different from original one. In this case, you should take care
of proper normalization. */
NO_INPUT_SCALE = 2,
/** Do not normalize the output vectors. If the flag is not set, the training algorithm
normalizes each output feature independently, by transforming it to the certain range
depending on the used activation function. */
NO_OUTPUT_SCALE = 4
};
virtual Mat getWeights(int layerIdx) const = 0;
/** @brief Creates empty model
Use StatModel::train to train the model, StatModel::load\<ANN_MLP\>(filename) to load the pre-trained model.
Note that the train method has optional flags: ANN_MLP::TrainFlags.
*/
static Ptr<ANN_MLP> create();
};
/****************************************************************************************\
* Logistic Regression *
\****************************************************************************************/
/** @brief Implements Logistic Regression classifier.
@sa @ref ml_intro_lr
*/
class CV_EXPORTS LogisticRegression : public StatModel
{
public:
/** Learning rate. */
CV_PURE_PROPERTY(double, LearningRate)
/** Number of iterations. */
CV_PURE_PROPERTY(int, Iterations)
/** Kind of regularization to be applied. See LogisticRegression::RegKinds. */
CV_PURE_PROPERTY(int, Regularization)
/** Kind of training method used. See LogisticRegression::Methods. */
CV_PURE_PROPERTY(int, TrainMethod)
/** Specifies the number of training samples taken in each step of Mini-Batch Gradient
Descent. Will only be used if using LogisticRegression::MINI_BATCH training algorithm. It
has to take values less than the total number of training samples. */
CV_PURE_PROPERTY(int, MiniBatchSize)
/** Termination criteria of the algorithm. */
CV_PURE_PROPERTY(TermCriteria, TermCriteria)
//! Regularization kinds
enum RegKinds {
REG_NONE = -1, //!< Regularization disabled
REG_L1 = 0, //!< %L1 norm
REG_L2 = 1 //!< %L2 norm
};
//! Training methods
enum Methods {
BATCH = 0,
MINI_BATCH = 1 //!< Set MiniBatchSize to a positive integer when using this method.
};
/** @brief Predicts responses for input samples and returns a float type.
@param samples The input data for the prediction algorithm. Matrix [m x n], where each row
contains variables (features) of one object being classified. Should have data type CV_32F.
@param results Predicted labels as a column matrix of type CV_32S.
@param flags Not used.
*/
virtual float predict( InputArray samples, OutputArray results=noArray(), int flags=0 ) const = 0;
/** @brief This function returns the trained paramters arranged across rows.
For a two class classifcation problem, it returns a row matrix. It returns learnt paramters of
the Logistic Regression as a matrix of type CV_32F.
*/
virtual Mat get_learnt_thetas() const = 0;
/** @brief Creates empty model.
Creates Logistic Regression model with parameters given.
*/
static Ptr<LogisticRegression> create();
};
/****************************************************************************************\
* Auxilary functions declarations *
\****************************************************************************************/
/** @brief Generates _sample_ from multivariate normal distribution
@param mean an average row vector
@param cov symmetric covariation matrix
@param nsamples returned samples count
@param samples returned samples array
*/
CV_EXPORTS void randMVNormal( InputArray mean, InputArray cov, int nsamples, OutputArray samples);
/** @brief Generates sample from gaussian mixture distribution */
CV_EXPORTS void randGaussMixture( InputArray means, InputArray covs, InputArray weights,
int nsamples, OutputArray samples, OutputArray sampClasses );
/** @brief Creates test set */
CV_EXPORTS void createConcentricSpheresTestSet( int nsamples, int nfeatures, int nclasses,
OutputArray samples, OutputArray responses);
//! @} ml
}
}
#endif // __cplusplus
#endif // __OPENCV_ML_HPP__
/* End of file. */
Reference in New Issue View Git Blame Copy Permalink