Table of Contents

How it works?

Support Many Buckets

Supported APIs
Feature difference

Empty folders

S3 Authentication

Dynamic Configuration
Static Configuration

Public access (with anonymous download)
Actions with wildcard

Presigned URL
Multiple S3 Nodes

Authentication with Filer

To be compatible with Amazon S3 API, a separate "weed s3" command is provided. This provides much faster access when reading or writing files, compared to operating files on the cloud.

How it works?

weed s3 will start a stateless gateway server to bridge the Amazon S3 API to SeaweedFS Filer. For convenience, weed server -s3 will start a master, a volume server, a filer, and the S3 gateway. And weed filer -s3 can start a filer and the S3 gateway together also.

Each bucket is stored in one collection, and mapped to folder /buckets/<bucket_name> by default.

A bucket can be deleted efficiently by deleting the whole collection.

From version 3.51 name of collection is filerGroup_bucketname or bucketname if filer group is not set.

Support Many Buckets

Each bucket has its own collection. Usually one collection uses 7 volumes, where each volume is 30GB by default. So if you want to create multiple buckets, you may run out of volumes very quickly unless you have a large disk.

Try to keep the volume size low. For example,

weed master -volumeSizeLimitMB=1024

In addition, you can also configure the per bucket storage this way in weed shell:

fs.configure -locationPrefix=/buckets/ -volumeGrowthCount=1 -apply

This will add 1 physical volume when existing volumes are full. If using replication, you will need to add more volumes, so that it is a multiple of the number of replicas:

fs.configure -locationPrefix=/buckets/ -replication=001 -volumeGrowthCount=2 -apply

See https://github.com/seaweedfs/seaweedfs/wiki/Path-Specific-Configuration

Supported APIs

Currently, the following APIs are supported.

// Object operations
* PutObject
* GetObject
* HeadObject
* CopyObject
* DeleteObject
* ListObjectsV2
* ListObjectsV1
* DeleteMultipleObjects
* PostPolicy

// Object Tagging
* GetObjectTagging
* PutObjectTagging
* DeleteObjectTagging

// Bucket operations
* PutBucket
* DeleteBucket
* HeadBucket
* ListBuckets

// Multipart upload operations
* NewMultipartUpload
* CompleteMultipartUpload
* AbortMultipartUpload
* ListMultipartUploads
* PutObjectPart
* CopyObjectPart
* ListObjectParts

Not included:

Policy

Feature difference

Feature	SeaweedFS	Amazon S3
Multi byte ranges reads	Yes	No
DeleteObject deletes a folder	Yes	No
same path for both a file and a folder	No	Yes
allows more than "/" as a delimiter	No	Yes

Empty folders

SeaweedFS has directories while AWS S3 only has objects with "fake" directories. In AWS S3, if the last file is deleted in a directory, the directory will disappear also.

To be consistent with AWS S3, SeaweedFS tries to check whether the folder is empty after each deletion. You can use weed s3 -allowEmptyFolder to toggle this behavior.

S3 Authentication

By default, the access key and secret key to access weed s3 is not authenticated. To enable credential based access, you can choose static or dynamic configuration:

Dynamic Configuration: setup auth with s3.configure in weed shell
Static Configuration: create a config.json file similar to the example below, and specify it via weed s3 -config=config.json

Dynamic Configuration

Example command:

s3.configure -access_key=any -secret_key=any -buckets=bucket1 -user=me -actions=Read,Write,List,Tagging,Admin -apply

Output from above s3.configure command:

{
  "identities": [
    {
      "name": "me",
      "credentials": [
        {
          "accessKey": "any",
          "secretKey": "any"
        }
      ],
      "actions": [
        "Read:bucket1",
        "Write:bucket1",
        "List:bucket1",
        "Tagging:bucket1",
        "Admin:bucket1"
      ]
    }
  ]
}

Static Configuration

To enable credential based access, create a config.json file similar to the example below, and specify it via weed s3 -config=config.json. The config file can be re-read on the HUB signal without restarting the main process via pkill -HUP weed

You just need to create a user with all "Admin", "Read", "Write", "List", "Tagging" actions. You can create as many users as needed. Each user can have multiple credentials.

The "Admin" action is needed to list, create, and delete buckets.
The "Write" action allows uploading files to all buckets.
The "WriteAcp" action allows writing the access control list (ACL) from all buckets.
The "Read" action allows reading files from all buckets.
The "ReadAcp" action allows reading the access control list (ACL) from all buckets.
The "List" action allows listing files from all buckets.
The "Tagging" action allows tagging files from all buckets.
The "Write:<bucket_name>" action allows uploading files within a bucket, e.g., "Write:bucket1".
The "WriteAcp:<bucket_name>" action allows writing ACL within a bucket, e.g., "Write:bucket1".
The "Read:<bucket_name>" action allows reading files within a bucket, e.g., "Read:bucket2".
The "ReadAcp:<bucket_name>" action allows reading ACL within a bucket, e.g., "Read:bucket2".
The "List:<bucket_name>" action allows listing files within a bucket, e.g., "List:bucket2".
The "Tagging:<bucket_name>" action allows tagging files within a bucket, e.g., "Tagging:bucket2".

Public access (with anonymous download)

For public access, you can configure an identity with name "anonymous", usually with just "Read" action, or access to specific buckets.

{
  "identities": [
    {
      "name": "anonymous",
      "actions": [
        "Read"
      ]
    },
    {
      "name": "some_name",
      "credentials": [
        {
          "accessKey": "some_access_key1",
          "secretKey": "some_secret_key1"
        }
      ],
      "actions": [
        "Admin",
        "Read",
        "ReadAcp",
        "List",
        "Tagging",
        "Write",
        "WriteAcp"
      ]
    },
    {
      "name": "some_read_only_user",
      "credentials": [
        {
          "accessKey": "some_access_key2",
          "secretKey": "some_secret_key2"
        }
      ],
      "actions": [
        "Read",
        "List"
      ]
    },
    {
      "name": "some_normal_user",
      "credentials": [
        {
          "accessKey": "some_access_key3",
          "secretKey": "some_secret_key3"
        }
      ],
      "actions": [
        "Read",
        "List",
        "Tagging",
        "Write"
      ]
    },
    {
      "name": "user_limited_by_bucket",
      "credentials": [
        {
          "accessKey": "some_access_key4",
          "secretKey": "some_secret_key4"
        }
      ],
      "actions": [
        "Read:bucket1",
        "Read:bucket2",
        "Read:bucket3",
        "Write:bucket1"
      ]
    }
  ]
}

Actions with wildcard

Wildcard is partially supported for prefix lookup. The following example actions are allowed:

Read
Read:bucket
Read:bucket_prefix*
Read:bucket/*
Read:bucket/a/b/*

Presigned URL

Presigned URL is supported. See AWS-CLI-with-SeaweedFS#presigned-url for example.

Multiple S3 Nodes

If you need to setup multiple S3 nodes, you can just start multiple s3 instances pointing to a filer.

Usually you would also want to have multiple filers. The easiest way is to run filer together with a S3.

weed filer -s3

Authentication with Filer

You can use mTLS for the gRPC connection between S3-API-Proxy and the filer, as explained in Security-Configuration - controlled by the grpc.* configuration in security.toml.

Starting with version 2.84, it is also possible to authenticate the HTTP operations between the S3-API-Proxy and the Filer (especially uploading new files). This is configured by setting jwt.filer_signing.key and jwt.filer_signing.read.key in security.toml.

With both configurations (gRPC and JWT), it is possible to have Filer and S3 communicate in fully authenticated fashion; so Filer will reject any unauthenticated communication.

Introduction

API

Configuration

Filer

Filer Stores

Advanced Filer Configurations

FUSE Mount

WebDAV

Cloud Drive

AWS S3 API

AWS IAM

Machine Learning

TensorFlow with SeaweedFS

HDFS

Replication and Backup

Async Replication to another Filer [Deprecated]
Async Backup
Async Filer Metadata Backup
Async Replication to Cloud [Deprecated]
Kubernetes Backups and Recovery with K8up