tesseract/ccstruct/rejctmap.h

267 lines
8.9 KiB
C
Raw Normal View History

/**********************************************************************
* File: rejctmap.h (Formerly rejmap.h)
* Description: REJ and REJMAP class functions.
2016-11-08 02:46:33 +08:00
* Author: Phil Cheatle
* Created: Thu Jun 9 13:46:38 BST 1994
*
* (C) Copyright 1994, Hewlett-Packard Ltd.
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
** http://www.apache.org/licenses/LICENSE-2.0
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*
This module may look unnecessarily verbose, but here's the philosophy...
ALL processing of the reject map is done in this module. There are lots of
separate calls to set reject/accept flags. These have DELIBERATELY been kept
distinct so that this module can decide what to do.
Basically, there is a flag for each sort of rejection or acceptance. This
provides a history of what has happened to EACH character.
Determining whether a character is CURRENTLY rejected depends on implicit
understanding of the SEQUENCE of possible calls. The flags are defined and
grouped in the REJ_FLAGS enum. These groupings are used in determining a
characters CURRENT rejection status. Basically, a character is ACCEPTED if
none of the permanent rej flags are set
AND ( the character has never been rejected
OR an accept flag is set which is LATER than the latest reject flag )
IT IS FUNDAMENTAL THAT ANYONE HACKING THIS CODE UNDERSTANDS THE SIGNIFICANCE
OF THIS IMPLIED TEMPORAL ORDERING OF THE FLAGS!!!!
**********************************************************************/
#ifndef REJCTMAP_H
#define REJCTMAP_H
#ifdef __UNIX__
#include <assert.h>
#endif
#include <memory>
#include "bits16.h"
#include "params.h"
2016-11-08 02:46:33 +08:00
enum REJ_FLAGS {
/* Reject modes which are NEVER overridden */
2016-11-08 02:46:33 +08:00
R_TESS_FAILURE, // PERM Tess didn't classify
R_SMALL_XHT, // PERM Xht too small
R_EDGE_CHAR, // PERM Too close to edge of image
R_1IL_CONFLICT, // PERM 1Il confusion
R_POSTNN_1IL, // PERM 1Il unrejected by NN
R_REJ_CBLOB, // PERM Odd blob
R_MM_REJECT, // PERM Matrix match rejection (m's)
R_BAD_REPETITION, // TEMP Repeated char which doesn't match trend
/* Initial reject modes (pre NN_ACCEPT) */
2016-11-08 02:46:33 +08:00
R_POOR_MATCH, // TEMP Ray's original heuristic (Not used)
R_NOT_TESS_ACCEPTED, // TEMP Tess didn't accept WERD
R_CONTAINS_BLANKS, // TEMP Tess failed on other chs in WERD
R_BAD_PERMUTER, // POTENTIAL Bad permuter for WERD
/* Reject modes generated after NN_ACCEPT but before MM_ACCEPT */
2016-11-08 02:46:33 +08:00
R_HYPHEN, // TEMP Post NN dodgy hyphen or full stop
R_DUBIOUS, // TEMP Post NN dodgy chars
R_NO_ALPHANUMS, // TEMP No alphanumerics in word after NN
R_MOSTLY_REJ, // TEMP Most of word rejected so rej the rest
R_XHT_FIXUP, // TEMP Xht tests unsure
/* Reject modes generated after MM_ACCEPT but before QUALITY_ACCEPT */
2016-11-08 02:46:33 +08:00
R_BAD_QUALITY, // TEMP Quality metrics bad for WERD
/* Reject modes generated after QUALITY_ACCEPT but before MINIMAL_REJ accep*/
2016-11-08 02:46:33 +08:00
R_DOC_REJ, // TEMP Document rejection
R_BLOCK_REJ, // TEMP Block rejection
R_ROW_REJ, // TEMP Row rejection
R_UNLV_REJ, // TEMP ~ turned to - or ^ turned to space
/* Accept modes which occur between the above rejection groups */
2016-11-08 02:46:33 +08:00
R_NN_ACCEPT, // NN acceptance
R_HYPHEN_ACCEPT, // Hyphen acceptance
R_MM_ACCEPT, // Matrix match acceptance
R_QUALITY_ACCEPT, // Accept word in good quality doc
R_MINIMAL_REJ_ACCEPT // Accept EVERYTHING except tess failures
};
/* REJECT MAP VALUES */
#define MAP_ACCEPT '1'
#define MAP_REJECT_PERM '0'
#define MAP_REJECT_TEMP '2'
#define MAP_REJECT_POTENTIAL '3'
class REJ
{
BITS16 flags1;
BITS16 flags2;
void set_flag(REJ_FLAGS rej_flag) {
if (rej_flag < 16)
flags1.turn_on_bit (rej_flag);
else
flags2.turn_on_bit (rej_flag - 16);
}
BOOL8 rej_before_nn_accept();
BOOL8 rej_between_nn_and_mm();
BOOL8 rej_between_mm_and_quality_accept();
BOOL8 rej_between_quality_and_minimal_rej_accept();
BOOL8 rej_before_mm_accept();
BOOL8 rej_before_quality_accept();
public:
REJ() { //constructor
}
REJ( //classwise copy
const REJ &source) {
flags1 = source.flags1;
flags2 = source.flags2;
}
REJ & operator= ( //assign REJ
const REJ & source) { //from this
flags1 = source.flags1;
flags2 = source.flags2;
return *this;
}
BOOL8 flag(REJ_FLAGS rej_flag) {
if (rej_flag < 16)
return flags1.bit (rej_flag);
else
return flags2.bit (rej_flag - 16);
}
char display_char() {
if (perm_rejected ())
return MAP_REJECT_PERM;
else if (accept_if_good_quality ())
return MAP_REJECT_POTENTIAL;
else if (rejected ())
return MAP_REJECT_TEMP;
else
return MAP_ACCEPT;
}
BOOL8 perm_rejected(); //Is char perm reject?
BOOL8 rejected(); //Is char rejected?
BOOL8 accepted() { //Is char accepted?
return !rejected ();
}
//potential rej?
BOOL8 accept_if_good_quality();
BOOL8 recoverable() {
return (rejected () && !perm_rejected ());
}
void setrej_tess_failure(); //Tess generated blank
void setrej_small_xht(); //Small xht char/wd
void setrej_edge_char(); //Close to image edge
void setrej_1Il_conflict(); //Initial reject map
void setrej_postNN_1Il(); //1Il after NN
void setrej_rej_cblob(); //Insert duff blob
void setrej_mm_reject(); //Matrix matcher
//Odd repeated char
void setrej_bad_repetition();
void setrej_poor_match(); //Failed Rays heuristic
//TEMP reject_word
void setrej_not_tess_accepted();
//TEMP reject_word
void setrej_contains_blanks();
void setrej_bad_permuter(); //POTENTIAL reject_word
void setrej_hyphen(); //PostNN dubious hyph or .
void setrej_dubious(); //PostNN dubious limit
void setrej_no_alphanums(); //TEMP reject_word
void setrej_mostly_rej(); //TEMP reject_word
void setrej_xht_fixup(); //xht fixup
void setrej_bad_quality(); //TEMP reject_word
void setrej_doc_rej(); //TEMP reject_word
void setrej_block_rej(); //TEMP reject_word
void setrej_row_rej(); //TEMP reject_word
void setrej_unlv_rej(); //TEMP reject_word
void setrej_nn_accept(); //NN Flipped a char
void setrej_hyphen_accept(); //Good aspect ratio
void setrej_mm_accept(); //Matrix matcher
//Quality flip a char
void setrej_quality_accept();
//Accept all except blank
void setrej_minimal_rej_accept();
void full_print(FILE *fp);
};
class REJMAP
{
std::unique_ptr<REJ[]> ptr; // ptr to the chars
Use POSIX data types and macros (#878) * api: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * cutil: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * training: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract data types by POSIX data types Now all Tesseract data types which are no longer needed can be removed from ccutil/host.h. Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * lstm: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Remove the macros which are now unused from ccutil/host.h. Remove also the obsolete history comments. Signed-off-by: Stefan Weil <sw@weilnetz.de> * Fix build error caused by ambiguous ClipToRange Error message vom Appveyor CI: C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2672: 'ClipToRange': no matching overloaded function found [C:\projects\tesseract\build\libtesseract.vcxproj] C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2782: 'T ClipToRange(const T &,const T &,const T &)': template parameter 'T' is ambiguous [C:\projects\tesseract\build\libtesseract.vcxproj] c:\projects\tesseract\ccutil\helpers.h(122): note: see declaration of 'ClipToRange' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: could be 'char' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: or 'int' Signed-off-by: Stefan Weil <sw@weilnetz.de> * unittest: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * arch: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de>
2018-03-14 04:36:30 +08:00
int16_t len; //Number of chars
public:
REJMAP() : len(0) {}
REJMAP(const REJMAP &rejmap) { *this = rejmap; }
REJMAP &operator=(const REJMAP &source);
// Sets up the ptr array to length, whatever it was before.
Use POSIX data types and macros (#878) * api: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * cutil: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * training: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract data types by POSIX data types Now all Tesseract data types which are no longer needed can be removed from ccutil/host.h. Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * lstm: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Remove the macros which are now unused from ccutil/host.h. Remove also the obsolete history comments. Signed-off-by: Stefan Weil <sw@weilnetz.de> * Fix build error caused by ambiguous ClipToRange Error message vom Appveyor CI: C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2672: 'ClipToRange': no matching overloaded function found [C:\projects\tesseract\build\libtesseract.vcxproj] C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2782: 'T ClipToRange(const T &,const T &,const T &)': template parameter 'T' is ambiguous [C:\projects\tesseract\build\libtesseract.vcxproj] c:\projects\tesseract\ccutil\helpers.h(122): note: see declaration of 'ClipToRange' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: could be 'char' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: or 'int' Signed-off-by: Stefan Weil <sw@weilnetz.de> * unittest: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * arch: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de>
2018-03-14 04:36:30 +08:00
void initialise(int16_t length);
Use POSIX data types and macros (#878) * api: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * cutil: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * training: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract data types by POSIX data types Now all Tesseract data types which are no longer needed can be removed from ccutil/host.h. Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * lstm: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Remove the macros which are now unused from ccutil/host.h. Remove also the obsolete history comments. Signed-off-by: Stefan Weil <sw@weilnetz.de> * Fix build error caused by ambiguous ClipToRange Error message vom Appveyor CI: C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2672: 'ClipToRange': no matching overloaded function found [C:\projects\tesseract\build\libtesseract.vcxproj] C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2782: 'T ClipToRange(const T &,const T &,const T &)': template parameter 'T' is ambiguous [C:\projects\tesseract\build\libtesseract.vcxproj] c:\projects\tesseract\ccutil\helpers.h(122): note: see declaration of 'ClipToRange' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: could be 'char' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: or 'int' Signed-off-by: Stefan Weil <sw@weilnetz.de> * unittest: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * arch: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de>
2018-03-14 04:36:30 +08:00
REJ &operator[]( // access function
int16_t index) const // map index
{
ASSERT_HOST(index < len);
return ptr[index]; // no bounds checks
}
Use POSIX data types and macros (#878) * api: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * cutil: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * training: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract data types by POSIX data types Now all Tesseract data types which are no longer needed can be removed from ccutil/host.h. Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * lstm: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Remove the macros which are now unused from ccutil/host.h. Remove also the obsolete history comments. Signed-off-by: Stefan Weil <sw@weilnetz.de> * Fix build error caused by ambiguous ClipToRange Error message vom Appveyor CI: C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2672: 'ClipToRange': no matching overloaded function found [C:\projects\tesseract\build\libtesseract.vcxproj] C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2782: 'T ClipToRange(const T &,const T &,const T &)': template parameter 'T' is ambiguous [C:\projects\tesseract\build\libtesseract.vcxproj] c:\projects\tesseract\ccutil\helpers.h(122): note: see declaration of 'ClipToRange' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: could be 'char' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: or 'int' Signed-off-by: Stefan Weil <sw@weilnetz.de> * unittest: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * arch: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de>
2018-03-14 04:36:30 +08:00
int32_t length() const { //map length
return len;
}
Use POSIX data types and macros (#878) * api: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * cutil: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * training: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract data types by POSIX data types Now all Tesseract data types which are no longer needed can be removed from ccutil/host.h. Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * lstm: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Remove the macros which are now unused from ccutil/host.h. Remove also the obsolete history comments. Signed-off-by: Stefan Weil <sw@weilnetz.de> * Fix build error caused by ambiguous ClipToRange Error message vom Appveyor CI: C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2672: 'ClipToRange': no matching overloaded function found [C:\projects\tesseract\build\libtesseract.vcxproj] C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2782: 'T ClipToRange(const T &,const T &,const T &)': template parameter 'T' is ambiguous [C:\projects\tesseract\build\libtesseract.vcxproj] c:\projects\tesseract\ccutil\helpers.h(122): note: see declaration of 'ClipToRange' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: could be 'char' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: or 'int' Signed-off-by: Stefan Weil <sw@weilnetz.de> * unittest: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * arch: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de>
2018-03-14 04:36:30 +08:00
int16_t accept_count(); //How many accepted?
Use POSIX data types and macros (#878) * api: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * cutil: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * training: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract data types by POSIX data types Now all Tesseract data types which are no longer needed can be removed from ccutil/host.h. Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * lstm: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Remove the macros which are now unused from ccutil/host.h. Remove also the obsolete history comments. Signed-off-by: Stefan Weil <sw@weilnetz.de> * Fix build error caused by ambiguous ClipToRange Error message vom Appveyor CI: C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2672: 'ClipToRange': no matching overloaded function found [C:\projects\tesseract\build\libtesseract.vcxproj] C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2782: 'T ClipToRange(const T &,const T &,const T &)': template parameter 'T' is ambiguous [C:\projects\tesseract\build\libtesseract.vcxproj] c:\projects\tesseract\ccutil\helpers.h(122): note: see declaration of 'ClipToRange' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: could be 'char' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: or 'int' Signed-off-by: Stefan Weil <sw@weilnetz.de> * unittest: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * arch: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de>
2018-03-14 04:36:30 +08:00
int16_t reject_count() { //How many rejects?
return len - accept_count ();
}
void remove_pos( //Cut out an element
Use POSIX data types and macros (#878) * api: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * cutil: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * training: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract data types by POSIX data types Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract data types by POSIX data types Now all Tesseract data types which are no longer needed can be removed from ccutil/host.h. Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccmain: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccstruct: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * classify: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * dict: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * lstm: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * textord: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * wordrec: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * ccutil: Replace Tesseract's MIN_*INT, MAX_*INT* by POSIX *INT*_MIN, *INT*_MAX Remove the macros which are now unused from ccutil/host.h. Remove also the obsolete history comments. Signed-off-by: Stefan Weil <sw@weilnetz.de> * Fix build error caused by ambiguous ClipToRange Error message vom Appveyor CI: C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2672: 'ClipToRange': no matching overloaded function found [C:\projects\tesseract\build\libtesseract.vcxproj] C:\projects\tesseract\ccstruct\coutln.cpp(818): error C2782: 'T ClipToRange(const T &,const T &,const T &)': template parameter 'T' is ambiguous [C:\projects\tesseract\build\libtesseract.vcxproj] c:\projects\tesseract\ccutil\helpers.h(122): note: see declaration of 'ClipToRange' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: could be 'char' C:\projects\tesseract\ccstruct\coutln.cpp(818): note: or 'int' Signed-off-by: Stefan Weil <sw@weilnetz.de> * unittest: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de> * arch: Replace Tesseract's MAX_INT8 by POSIX INT8_MAX Signed-off-by: Stefan Weil <sw@weilnetz.de>
2018-03-14 04:36:30 +08:00
int16_t pos); //element to remove
void print(FILE *fp);
void full_print(FILE *fp);
BOOL8 recoverable_rejects(); //Any non perm rejs?
BOOL8 quality_recoverable_rejects();
//Any potential rejs?
void rej_word_small_xht(); //Reject whole word
//Reject whole word
void rej_word_tess_failure();
void rej_word_not_tess_accepted();
//Reject whole word
//Reject whole word
void rej_word_contains_blanks();
//Reject whole word
void rej_word_bad_permuter();
void rej_word_xht_fixup(); //Reject whole word
//Reject whole word
void rej_word_no_alphanums();
void rej_word_mostly_rej(); //Reject whole word
void rej_word_bad_quality(); //Reject whole word
void rej_word_doc_rej(); //Reject whole word
void rej_word_block_rej(); //Reject whole word
void rej_word_row_rej(); //Reject whole word
};
#endif