* take changes from fontconfig pr
* [farmhash] add autoconf
* [freexl] add autoconf
* [healpix] add autoconf
* [libb2] add autoconf
* [libwandio] add autoconf and patch
* more autoconf
* [x264] fix windows build issues
* minimal cleanup
* [libwandio] some fixes
* [vcpkg/scripts/make] add include to C/CXX flags correctly set machine flags for linker
* remove unnecessary comments part 1
* cleanup part 2
* cleanup
* remove unnecessary code
* [pbc] fix osx regressions
* [lzokay] format manifest
* try to copy sources to fix build issues
* add autoconfig to force updated configure scripts
* bump port versions of openmpi and ocilib
* added lib paths back into vcpkg_build_make because they are probably required
* Use CPP flags
add quotes around restoring of ENV
add LIB and LIBPATH correctly
* Apply suggestions from code review
Co-authored-by: ras0219 <533828+ras0219@users.noreply.github.com>
* Apply more changes forom CR
- remove mingw make
- add doc for missing options
- introduce two new macros for backup/restore of env vars
* fix wrong variables.
* use the list macro instead of the single var macro
* also use it at the top
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
Co-authored-by: Nicole Mazzuca <mazzucan@outlook.com>
Co-authored-by: ras0219 <533828+ras0219@users.noreply.github.com>
* [vcpkg/script] add vcpkg_find_fortran
* [openblas] add pkg-config fixes
* [lapack] add lapack-reference and reduce dependency on clapack
* fix build issues
* dont touch any main files
* move toolchain var into parent scope
* fix a few more issues
* create link in the noblas case
* removed unnecessary check handled by vcpkg_find_fortran.
* move dumpbin check
* fix last issue
* depend on openblas
* set cmake_binary_dir so that compiler id run gets put into buildtree.
* more paths
* add missing PARENT_SCOPE
* ws change
* [mlpack] remove dep on clapack
* comment out patches
* remove openblas again
* Install lapack wrapper since it is missing linkage against -lm and -lgfortran
* PREPEND mingw path to make sure cmake picks it up correctly
* depend on openblas also on osx
* add clapack on windows to skip due to conflicting library installs
* add clapack to skip on linux
* add -fPIC as a fortran compiler flag
* do not add the flag on windows
* add gcc explicitly to the cmake args.
* ws change
* applyrequested changes from CR
* fix the failing patch
If you changed VCPKG_TARGET_ARCHITECTURE to use x86_64, the prettify command failed to parse things properly. This was found during the changes made for #12657 and was completed by @strega-nil (thanks!).
* [vtk-m] new port vtk-m
* [VTK] Update to 9.0
* include local buildtree changes
* [pcl] disable VTK due to API changes in VTK 9.0
* [vtk-m] add supports field to be only x64
* [vtk-dicom] add python executable.
* fix vtkm dependency
* [vtk-dicom] fix missing std:: namespace
* [vtk-m] add uwp to unsupported triplets
* [vtk] add pegtl include patch, reenable IOMotionFX
* remove hdf5 changes for testing
* use different pgetl patch which redirects to the installed config of pegtl
* [pegtl-2] version file needs renaming too
* [vtk] change dependency to pgetl-2 and fix the patch
* [vtk] put in hdf5 fix again and correct manually installed include files
* remove deprecated function to retrigger CI
* [lz4] correctly lowercase the lz4 config
* [vtk] remove unnecessary code
* [pegtl-2] add homepage
* [pegtl] modernize portfiles
* [vtk-dicom] add homepage
* [vtk-dicom] modernize portfile
* [vtk-m] remove empty build depends
* [vtk] try fixing the permission issue
* [vtk] minimal dependency correction
* [itk] update
* fix portfile errors
* WIP commit
* should make ITK green in VCPKG CI but there a still issues with features
* more dependencies and features....
* remove itk from baseline failure so the check can get green
* more dependency updating.
* minor build fixes
* [openjpeg] Fix dll location
* fix other issues
* add rtkcuda
* [openjpeg] remove default features to make arm and uwp platforms happy
* [itk] more dependency fixes
* [openjpeg] fix no tools case
* [itk] fix wip patch
* [itk] split up patches & cleanup & and move rtk tools if build
* [itk] fix patch and remove old and wip patch
* [nifticlib] Add new port required by minc
* [nifticlib] change repo and add features
* [nifticilib] add zlib dependency & cleanup
* [minc] add new port
* [vcpkg/scripts] add swig to find acquire programm
* [itk/minc] update for external minc
* add supports field for nifticlib
* [itk] make python a default feature for testing
* [itk] cleanup python vars a bit
[vcpkg/scripts] correct swig hash
* [vcpkg/scripts] fix swig
* [itk] fix python include path on unix system
* [itk] remove python as a default. A bit of feature cleanup
* [itk] update remote RTK
* [itk|rtk] remove RTK module before configure to allow patching
* [opencl] update opencl wrapper
* [itk] fix opencl static linkage
* [itk] add cufftw fix
* update baseline
* [itk] fix itk[tbb]
* [itk] update python paths to 3.8
* [itk] add failure messages for unsupported architectures for some features
* [vcpkg_find_acquire_program] update swig to 4.0.2
* Update portfile.cmake
* [itk] move the module removal out of the if for people reusing the old source tree
* [itk] add missing auto_clean to vcpkg_copy_tools
* Update ports/nifticlib/CONTROL
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* Update ports/openjpeg/portfile.cmake
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* Update scripts/cmake/vcpkg_find_acquire_program.cmake
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* [openjpeg] pass OPTIONS to vcpkg_configure_cmake
* [itk] fix typo and leave a todo.
* use sourceforge args for swig
* Update ports/openjpeg/CONTROL
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* Update ports/opencl/CONTROL
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* [itk] remove debug msgs from patch
* pre-install yasm on OSX
Co-authored-by: Lily <47812810+LilyWangL@users.noreply.github.com>
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
Co-authored-by: JackBoosY <yuzaiyang@beyondsoft.com>
* vcpkg_fixup_cmake_targets: Add support for processing cmake config files generated by meson
In particular this adds a workaround for the differences between CMake and meson
described in https://github.com/mesonbuild/meson/issues/6955
* Add tomlplusplus
* Resolve conflicts
* Update scripts/ci.baseline.txt
* [tomplusplus] Update ci.basline.txt
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
Co-authored-by: wangli28 <wangli28@beyondsoft.com>
Co-authored-by: Cheney Wang <38240633+Cheney-W@users.noreply.github.com>
* [vcpkg] Fix vcpkg_fixup_cmake_targets to work correctly on MinGW
* [akali] Bump version to test vcpkg_fixup_cmake_targets changes
* Update ports/akali/CONTROL
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* [opencv4] draft update to v4.3
* restore uwp patch
* fix qt and ipp features
* fix libepoxy and meson on osx
* fix baseline, trigger a full rebuild due to meson tool changes
* remove jpeg feature on windows due to a bug with MSVC
* minor fixes for some features
* ffmpeg x11 lib not required anymore on apple for downstream projects
* small fixes for ogre and qt5
* remove a broken module
* fix installation path
* fix openexr which was broken and regressed opencv downstream projects
* first round of ci passes
* improve compatibility with android toolchain
* [openexr] upgrade to v2.5.0 to fix regressions, might require fixes in dependent projects and might deserve its own PR
* fix OpenEXR link for downstream projects
* do not install unrequested features
* fix compatibility with newer OpenEXR
* [OpenCV3] update to v3.4.10
* fix openexr on windows, was creating symlinks that broke vcpkg
* fix openexr wrapper
* [openexr] cmake config files are installed into a lowered-case folder
* remove mangled paths trying to fix android setup
* disable dnn on android, fix mangled cmake config paths again
* fix downstream CUDA dependency
* fix compatibility with vs16.6
* remove from baseline ports now passing tests
* [alembic] fixes for new openexr
* fix baseline
* [field3d] fixes for new openexr
* [field3d] improve fixes, windows still unsupported despite what is said upstream
* apply fixes required from review
* add missing field3d patch
* [field3d] disable mpi integration
* [opencv2] remove cublas integration
* [vtk] do not create libharu::libharu target if already existing
* Update ports/opencv4/portfile.cmake
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* Update ports/opencv3/portfile.cmake
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* improve compatibility with newer CUDNN
* [OpenCV3, OpenCV4] improve compatibility with CUDA 11
* [OpenCV2] improve compatibility with CUDA 11
* [field3d] regenerate patch ignoring space at eol
* [vcpkg] Use SSH keys instead of password authentication when minting Linux scale sets (#11999)
* [field3d] regenerate patch ignoring space at eol
* [field3d] regenerate patch, again
* [field3d] fixes for windows
* [libass] fix regression
* ci.baseline.txt update
* [CUDA11] use FindCUDA from CMake 3.18 to ease transition later
* re-bump vtk and ffmpeg, which were lost with merges from master
* [OpenCV4] Halide feature is not broken anymore
* [field3d] regenerate hdf5 patch
* [OpenCV4] remove GTK features: it can be built only on *nix but GTK on vcpkg cannot be built on *nix systems...
* merge ci.baseline.txt from master and fix field3d patch
* remove rebuilding
* restore vtk CONTROL file
* update CONTROL files
* Trigger rebuild
* Update ports/freeimage/CONTROL
* Update ports/freeimage/CONTROL
* [opencv3/4] avoid tesseract dependency on uwp builds
* [opencv] add missing module search
Co-authored-by: Billy Robert O'Neal III <bion@microsoft.com>
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* [vcpkg/scripts/pkgconfig] rewrite pkgconfig check for libraries.
* [vcpkg/scripts/pkgconfig] fix more details.
* [vcpkg/scripts/pkgconfig] smaller improvements
* ws change to check functionallity of script for testing.
* [vcpkg/scripts/pkgconfig] update to latest test version
* Revert "ws change to check functionallity of script for testing."
This reverts commit 26269e9e77.
* [nettle] bump control for vcpkg_fixup_pkgconfig test
* [gmp] rerun CI to create new *.pc files
* [gmp/nettle] enable port debug
* [vcpkg/script/pkgconfig] fix path conversion regex for CI
* [CI|OSX] install pkg-config on osx
* [gmp/nettle] disable port debug
* [vcpkg/scripts/pkgconfig] update to latest version of x windows pr
* [zlib] add pkgconfig file
* [zstd] add fixup pkgconfig
* [libpng] add pc file installation
* [bzip2] install pc file and leave a TODO for somebody else ;)
* [bzip2] bump control
* [vcpkg/scripts/pkgconfig] skip checks if pkgconfig cannot be found.
- small bugfix in ignore flags regex
* retry zstd and zlib
* [libpng] retry by adding dl and m to system libraries for osx
* [libpng] add missing vcpkg_fixup_pkgconfig()
* [vcpkg/scripts/pkgconfig] unset var if found.
fixes checks for other configurations which will be always succesful otherwise
* [libpng] bump control
* [libpng] enable port debug to debug osx regression
* ws change to retrigger osx ci and hopeing that it works
* fix typo
* [libpng] remove -lm flag on apple platforms
* ws change to rerun some ports in ci for good measure after the merge with master
* Re-trigger CI test
* [zstd] add pkgconfig
* [zstd] correct debug link
* [vcpkg/script/pkgconfig] - add more search suffixes for static libs
- add additional debug messages for debuging
- fix unsetting of cache variables hiding issues with debug libraries
- fixed pkgconfig fix in the debug case
* [pcre] add pthread dependency to pcre
* [protobuf] fix pkgconfig
* include quotes around the prefix in the case the prefix path was quoted (fixes some regressions)
add option NOT_STATIC_PKGCONFIG to run pkg-config without the --static argument
* [ignition-msgs5] get rid of a dev warning
* [apr] fix apr regression
* [protobuf] fix protobuf regression
* [sdl1] fix regression due to variable expansion of pkg-config. Use similar regex to the library removal for ignored flags.
* [ignition] fix regression
* remove changes of zlib portfile.
* reset changes in osx ci pipeline
* add DISABLE_PARALLEL_CONFIGURE
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
Co-authored-by: JackBoosY <yuzaiyang@beyondsoft.com>
Co-authored-by: Billy Robert O'Neal <bion@microsoft.com>
* [vcpkg] Track hashes of cmake script helpers in consuming portfiles
* [vcpkg] Format
* [vcpkg_find_acquire_program] Use cpkg_from_sourceforge for FLEX and BISON
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
--editable suppresses binary caching and source re-extraction for packages listed on the command line (similar to --head).
This fundamentally changes the port maintenance loop, so several example documents were updated. To avoid users having substantial changes suddenly destroyed by forgetting to pass --editable, "clean" sources have different extract locations.
The undocumented command `build` implies `--editable`.
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* Update .gitignore
* Add mingw dynamic lib triplets
* Only copy pdbs if not using *-mingw triplets
* Using VCPKG_POLICY_DLLS_WITHOUT_LIBS as a workaround
* Rename *-mingw to *-mingw-dynamic
Co-authored-by: Billy Robert O'Neal <bion@microsoft.com>
* [vcpkg] Upgrade find_acquire_program(NUGET) to 5.5.1. Add partial SHA to temporary download paths to avoid collisions.
* [vcpkg] Fix regression in `vcpkg export --nuget` due to file locking on .vcpkg-root
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
==== Changes Related to manifests ====
* Add the `manifests` feature flag
* This only says whether we look for a `vcpkg.json` in the cwd, not
whether we support parsing manifests (for ports, for example)
* Changes to the manifests RFC
* `"authors"` -> `"maintainers"`
* `--x-classic-mode` -> `-manifests` \in `vcpkg_feature_flags`
* reserve `"core"` in addition to `"default"`, since that's already
reserved for features
* Add a small helper note about what identifiers must look like
* `<license-string>`: SPDX v3.8 -> v3.9
* `"feature"."description"` is allowed to be an array of strings as well
* `"version"` -> `"version-string"` for forward-compat with versions
RFC
* Add the `--feature-flags` option
* Add the ability to turn off feature flags via passing
`-<feature-flag>` to `VCPKG_FEATURE_FLAGS` or `--feature-flags`
* Add CMake toolchain support for manifests
* Requires either:
* a feature flag of `manifests` in either `Env{VCPKG_FEATURE_FLAGS}`
or `VCPKG_FEATURE_FLAGS`
* Passing the `VCPKG_ENABLE_MANIFESTS` option
* The toolchain will install your packages to
`${VCPKG_MANIFEST_DIR}/vcpkg_installed`.
* Add MSBuild `vcpkg integrate install` support for manifests
* Requires `VcpkgEnableManifest` to be true
* `vcpkg create` creates a port that has a `vcpkg.json` instead of a
`CONTROL`
* argparse, abseil, 3fd, and avisynthplus ports switched to manifest
from CONTROL
* Add support for `--x-manifest-root`, as well as code for finding it if
not passed
* Add support for parsing manifests!
* Add a filesystem lock!
==== Important Changes which are somewhat unrelated to manifests ====
* Rename `logicexpression.{h,cpp}` to `platform-expression.{h,cpp}`
* Add `PlatformExpression` type which takes the place of the old logic
expression
* Split the parsing of platform expressions from checking whether
they're true or not
* Eagerly parse PlatformExpressions as opposed to leaving them as
strings
* Add checking for feature flag consistency
* i.e., if `-binarycaching` is passed, you shouldn't be passing
`--binarysource`
* Add the `Json::Reader` type which, with the help of user-defined
visitors, converts JSON to your internal type
* VcpkgArgParser: place the switch names into a constant as opposed to
using magic constants
* In general update the parsing code so that this ^ works
* Add `Port-Version` fields to CONTROL files
* This replaces the existing practice of
`Version: <my-version>-<port-version>`
==== Smaller changes ====
* small drive-by cleanups to some CMake
* `${_VCPKG_INSTALLED_DIR}/${VCPKG_TARGET_TRIPLET}` ->
`${CURRENT_INSTALLED_DIR}`
* Remove `-analyze` when compiling with clang-cl, since that's not a
supported flag (vcpkg's build system)
* Add a message about which compiler is detected by vcpkg's build
system machinery
* Fix `Expected::then`
* Convert `""` to `{}` for `std::string` and `fs::path`, to avoid a
`strlen` (additionally, `.empty()` instead of `== ""`, and `.clear()`)
* Add `Strings::strto` which converts strings to numeric types
* Support built-in arrays and `StringView` for `Strings::join`
* Add `operator<` and friends to `StringView`
* Add `substr` to `StringView`
* SourceParagraphParser gets some new errors
* [ignition-plugin1] Add new port
* vcpkg_fixup_cmake_targets: Add DO_NOT_DELETE_PARENT_CONFIG_PATH
By default the vcpkg_fixup_cmake_targets script remove the parent
path of CONFIG_PATH if it named "cmake", this behaviour is not convenient
for ports that install more than one CMake package config file, and
for which vcpkg_fixup_cmake_targets is invoked multiple times.
To optionally disable this behaviour, this commit adds the option
DO_NOT_DELETE_PARENT_CONFIG_PATH to vcpkg_fixup_cmake_targets.
* [ignition-modularscripts] Add support for ignition libraries that install multiple CMake package config files
Some ignition libraries install several CMake package config files,
to represent the different components of the library. This commit modifies
the ignition_modular_library function to fixup correctly all the cmake package config files.
* vcpkg_fixup_pkgconfig: Move definition of SYSTEM_LIBRARIES to vcpkg_common_definitions
To correctly validate installed pkg-config files, vcpkg_fixup_pkgconfig needs to know
for each platform which libraries are not managed by vcpkg. This commits improve this
definitions for all the triplet supported by vcpkg, and move this definition to vcpkg_common_definitions
in a way that permit custom triplets to overload its value.
Last several days Strawberry Perl official download server has issues that lead to extremely slow download rates
(sometimes it takes more than 1 hour to download ~150MB).
This commit adds non-official mirror of Strawberry Perl to the list of available URLs.
Signed-off-by: Vitalii Koshura <lestat.de.lionkur@gmail.com>
* [vcpkg-acquire-msys] Remove obsolete workaround.
* [vcpkg-acquire-msys] Don't refresh package database on package install.
* [vcpkg-acquire-msys] Drop no longer needed taskkill.
* Trigger CI rebuild to test vcpkg_acquire_msys.
* update all 16 configure_make ports
* add make wrappers for msvc
* improve make builds
* fix relativ path errors on linux (and osx?)
* revisit all 16 portfiles again
* remove trace from install
* fix relative build path issues.
* bump control of the 16 configure ports
* never forget .... real linux is case sensitive ....
* Revert "bump control of the 16 configure ports"
This reverts commit 40d6d81c01.
* Revert "Revert "bump control of the 16 configure ports""
This reverts commit 9c9851ddfc.
* bump control again for real ci rebuild
* add copy_source
* remove message
* pass parameters to vcpkg_build_make
* fix healpix build.
* fix libmagic regression
* fix libwandio regression
* pfring changes regression fix? (cannot test in wsl)
* ws change to retrigger CI
* fix libpq regression
* fix libudns regression
* add share/pkgconfig to PKG_CONFIG_PATH
* cleanup of deprecated options
* cleanup docs
* Revert "bump control again for real ci rebuild"
This reverts commit b4bc18edc2.
* shared binaries on linux should stay in lib. Only dlls are mvoed to bin
* move pkgconfig check and add message about missing system packages
* added autopoint as a build requirement
* fix prerun shell working dir.
* a few fixes from the x windows pr
- add libpath setting
- fixed pkgconfig search on windows platforms
- fixed autopoint msys package on windows
* fix release prefix
* minimal cleanup and ws changes to trigger true CI rebuild
* fix tcl by upgrading
* remove unnecessary rename
* fix pfring? can't test in WSL. Linux kernel headers required.
* fix lowercase in patch
* fix libwandio
* remove x264 from fail list
* replace wrappers with wrappers from automake
* update make ports
* remove unnecessary message
* refactor vcpkg_configure_make
* [tcl] remove stray ?
* [farmhash] fix build
* [freexl] ws change to retrigger ci build
* [x264] add pthread as a dependency
* [vcpkg/scripts] add ignore flag correctly
* [sdl] fix vcpkg_fixup_pkgconfig call
* [farmhash/freexl] delete configure and recreate it.
* [libudns] remove trailing ?
* [freexl] use empty build target
* [freexl] add system library; remove previous change
* Update ports/x264/portfile.cmake
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* [libwandio] remove unncessary comment
Co-authored-by: dan-shaw <51385773+dan-shaw@users.noreply.github.com>
Co-authored-by: Jack·Boos·Yu <47264268+JackBoosY@users.noreply.github.com>
* [tool-meson] Update to 0.54.2
- Release notes: https://mesonbuild.com/Release-notes-for-0-54-0.html
- Homepage added to CONTROL file
* Re-trigger CI test
Co-authored-by: JackBoosY <yuzaiyang@beyondsoft.com>
* add new function vcpkg_fixup_pkgconfig
* make message with changed files a debug_message
* add two more cases to the debug *.pc files
* comment out prefix.
use --define-variable=prefix=INSTALL_PATH
* changed the comment header.
* add missing word
* finish vcpkg_fixup_pkgconfig.cmake
* Update vcpkg_fixup_pkgconfig.cmake
Note: since CMake is run in script mode the description of VCPKG_FIXUP_PKGCONFIG_CALLED cannot be viewed
* transfer changes from x windows pr
* fix typo in regex
* add port for vs yasm integration within VCPKG
* add gmp
* add nettle
* add missing windows flag in control
* CI workaround
CI seems to not pass env YASMPATH correctly to cl.
Since YASM is on PATH -> remove $(VCInstallDir) as the default for YasmPath
* overwrite correct import.
* If CI does not give logs just display some extra info
* target replacement was mising
* apply same replacements for nettle
* remove unnecessary status message
* remove unnecessary platform code
* update supports field for vs-yasm
* apply replacement also to libhogweed
* fix static builds
* remove not working code
* remove debug/release options
* add additional replacement for the case the SOURCE dir has already been patched within VCPKG
* add triplet selection to vcpkg_install_msbuild
* fix missing ; in patches
* remove gmp dependency in static builds since they are not required
* cleanup portfiles
* add missing vcpkg_fixup_pkgconfig() call
* [vcpkg/scripts] fix wrong paths variable on windows
* [vcpkg/scripts] search within vcpkg first and then ask the rest of the world
* [vcpkg/scripts] add second search path for ninja.
First is for vcpkg fetch ninja
Second is for vcpkg_find_acquire_program
* [vcpkg] Add new function vcpkg_copy_tools
* [cpuinfo][czmq][nanomsg][uriparser] Use vcpkg_copy_tools
* [czmq] Clean even tools are not copied
[libsvm][zyre] Use vcpkg_copy_tools
* [vcpkg-copy-tools] Clean debug/bin
This should fix czmq build error
* [czmq] czmq does not have BUILD_TOOLS option
* [vcpkg] Split clean logic into another function
* [cpuinfo][czmq][nanomsg][uriparser] Fix calling of vcpkg_copy_tools
* [zyre] Fix regression error
* [vcpkg] Update try_remove_empty_directory
* [libsvm] Fix vcpkg_copy_tools call
* add new function vcpkg_fixup_pkgconfig
* make message with changed files a debug_message
* add two more cases to the debug *.pc files
* comment out prefix.
use --define-variable=prefix=INSTALL_PATH
* changed the comment header.
* add missing word
* finish vcpkg_fixup_pkgconfig.cmake
* Update vcpkg_fixup_pkgconfig.cmake
Note: since CMake is run in script mode the description of VCPKG_FIXUP_PKGCONFIG_CALLED cannot be viewed
* transfer changes from x windows pr
* fix typo in regex
* make the regex comment aware
make pc files relocatable by using ${pcfiledir} in prefix
tested with x window pr
* Add iOS community triplets and toolchain support
Added an iOS toolchain to enable building packages for iOS.
The toolchain is used when a triplet's VCPKG_CMAKE_SYSTEM_NAME is set
to iOS.
To configure which architecture should be built, as well as other
iOS specifics, the following triplet variables can be set:
- VCPKG_TARGET_ARCHITECTURE
- VCPKG_OSX_SYSROOT
- VCPKG_OSX_DEPLOYMENT_TARGET
- VCPKG_OSX_ARCHITECTURES
The following VCPKG_TARGET_ARCHITECTURE values are currently
supported:
- arm, arm64, x64, x86.
The following VCPKG_OSX_SYSROOT values are currently supported:
- iphoneos, iphonesimulator, or an absolute path to the device or
simulator Xcode SDK.
VCPKG_OSX_DEPLOYMENT_TARGET can be set to control the minimum iOS
delopyment target for the built libraries.
CMAKE_OSX_ARCHITECTURES is derived from VCPKG_TARGET_ARCHITECTURE,
so generally it should not be set. In case if someone needs to target
a more specific architecture (like armv7k or arm64e), it can
be set in the triplet via VCPKG_OSX_ARCHITECTURES.
Note that only certain combinations of the architecture and sysroot
will work: simulator SDKs only provide x86-based libraries, etc.
The toolchain also sets CMAKE_SYSTEM_PROCESSOR for certain
configurations, because certain packages (like libpng) depend on the
processor type.
Added 4 community iOS triplets that build static libraries:
- arm-ios, arm64-ios, x86-ios, x64-ios.
The non-arm triplets target the iOS simulator.
The triplets build static libraries because they are easiest to
integrate into an iOS project. Dynamic libraries or frameworks require
code signing on iOS, which complicates integration.
Added heuristics to try and automatically detect what iOS triplet to
use when building your own CMake project (so when a CMake project sets
CMAKE_TOOLCHAIN_FILE to buildsystems/vcpkg.cmake), if no explicit
triplet is provided (VCPKG_TARGET_TRIPLET is undefined).
The heuristic checks for the values of CMAKE_SYSTEM_NAME and
CMAKE_OSX_ARCHITECTURES. Note that for this to work,
CMAKE_OSX_ARCHITECTURES needs to be set before the first project()
call in your CMake project.
Added workaround so find_package finds vcpkg installed packages
when targeting iOS.
This is done by saving / restoring the value of CMAKE_FIND_ROOT_PATH
while also adding the vcpkg package root in the find_package override
macro.
The workaround can be removed once vcpkg upgrades to CMake 3.15.0
or higher where the issue is fixed.
Fixes: #6003
* Fix building libpng and pcre2 targetting iOS
Fixes: #6003
* fix configure meson for non windows builds.
* change to the two ports using meson
* fix passing of empty compiler arguments.
* dont transform / into - for all flags
* copy meson logs into the buildtree to better diagnose CI errors of meson ports
* another change to the two ports to actually force a CI rebuild
* add missing /pkgconfig dir to PKG_CONFIG_PATH
* fix pkgconfig setup
* add share/pkgconfig to PKG_CONFIG_PATH
* Add CMake path to PATH for meson
* add share folder to prefix for meson
* remove double message
* add libdir so that meson does not install into architecture folder in linux
and make prefix path target dependent. (Or should it be host dependent?)
* bump controls
* update toolchain selector to use VCPKG_TARGET_IS_<paltform>.
* change pkgconfig prefix and path.....
meson is not correctly handling native windows paths and eating "\"
PKG_CONFIG_PATH also nees : to correctly separate paths
Prefix still must be near to native path but with / instead of \ C:/somepath/
* vcpkg_from_git: Add support for git over ssh
* vcpkg_from_git: append ssh bin directory to path
* vcpkg_from_git: fix function signature on non windows platforms
* Revert "vcpkg_from_git: fix function signature on non windows platforms"
This reverts commit 0d608ee591.
* Revert "vcpkg_from_git: append ssh bin directory to path"
This reverts commit 377ce3fae1.
* Partial Revert "vcpkg_from_git: Add support for git over ssh"
This partially reverts commit 9b81b16c4c.
Co-authored-by: Marc Boucek <marc.boucek@native-instruments.de>
Co-authored-by: Marc Boucek <marc.boucek@posteo.net>
Resolves#10322
* Update MSYS2 download source. Resolve#10322
Proposal to resolve https://github.com/microsoft/vcpkg/issues/10322
* Use Sourceforge as MSYS2 download source (up to SF to choose mirror, fair to everyone and more reliable)
* Updated msys2 version to 2019-05-24 (Otherwise need to spend extra time on ```pacman -Syu```)
* Updated SHA512 accordingly
* Tested with building icu:x64-windows
* add official repo as backup
* remove unfinished "supports" tag
* extract "supports" from control files
But do nothing with the value
* Start `Supports` documentation
* Use Supports in a bunch of control files
I only tried matching the already existing logic in the portfile.cmake.
* Cmake var provider (#8)
* Cmake var provider (#9)
* fix windows build (#10)
* Add missing files to build
* Fix test (#11)
* adding hooks for cmake variables in expressions
* Adding hooks for 'supports' in CI test
* Fix test (#12)
* Add overrides to evaluation environment
* use "supported" tag in CI testing
* cleanup comment
* Fix issues with PR
* [var_provider] Get library linkage variables from triplet
* Fix compilation errors in tests
* Add unimplemented functions
* Fix unit tests part 1
* Fix issue when buildtrees dir does not exist
* Change binary output hash
* Fix handling of * feature
* Add core feature when using *
* Do not add Default-Features when installing 'core'
* [vcpkg] WIP. 6 failing tests.
* [vcpkg] WIP. 1 failing tests.
* [vcpkg] WIP. 0 failing tests.
* [vcpkg] Removed 'remove_graph'. 0 failing tests.
* [vcpkg] Removed 'install_graph'. 0 failing tests.
* [vcpkg] Remove AnyAction; replace with ActionPlan
* [vcpkg] Minor cleanup.
* [vcpkg][z3][qt5-connectivity][qt5-purchasing] Improve error messages while parsing. Fix a few trivial port issues.
* [vcpkg] Work around ICE with MSVC v140
* [vcpkg] Add purge on fail to decompress for CI
* [vcpkg] Fix parsing of nested parentheses in qualifiers
* [vcpkg] Fix Linux builds (explicit qualification in declaration)
* [vcpkg] Fix Build-Depends implying default features. Fix qualified dependencies regression.
* [mmx] Add to skip list and full rebuild -- mmx causes problems by installing 'sched.h'
* [libpqxx][mqtt-cpp] Prevent installing include/CMakeLists.txt
* [cppitertools] Fix installed include namespace (should be include/cppitertools)
* [libsoundio] Move headers into soundio/ subdirectory as per original cmake
* [ci.baseline] Temporarily skip charls due to conflict with dcmtk
* [vcpkg] Add restricted include files post build check -- bump global abi version
* [libsoundio] Hotfix stray line in portfile
* [vcpkg] Fix regression: CMake information was not being displayed for build-and-install actions
* [jsonnet] Fix installation of internal headers; use system nlohmann-json
* [grpc][upb] Teach grpc to use packaged upb. Add find_package(upb). Remove inappropriate upb features.
* [zfp] Move problematic 'include/bitstream.h' to 'include/zfp/bitstream.h'
* [x265] Bump control version to trigger rebuild after zfp conflict
* [akali] Disable parallel configure
* [dirent][dlfcn-win32][getopt-win32][pthreads] Grandfather into VCPKG_POLICY_ALLOW_RESTRICTED_HEADERS
* [ci.baseline] Update baseline for improved upb support
* [tgui] Disable parallel configure
* [libiconv] Enable VCPKG_POLICY_ALLOW_RESTRICTED_HEADERS
* [aws-sdk-cpp] Disable parallel configure
* [vcpkg] Implement policy VCPKG_POLICY_ALLOW_RESTRICTED_HEADERS
* [aws-sdk-cpp] Fix amount of escaping semicolons -- Note: I do not know the root cause requiring this change
* [libodb-sqlite] Fix configuring into source directory
* [gettext] Grandfather into VCPKG_POLICY_ALLOW_RESTRICTED_HEADERS
* [libodb] DISABLE_PARALLEL_CONFIGURE
* [vcpkg] Add 'config.h' and 'local.h' to restricted header list
* [mcpp] Remove unused and problematic include 'config.h' from installed files
* [teemo] Move installed headers into subdirectory to prevent conflicts with x265
* [ci.baseline] Update current OSX. Skip libmesh on all platforms due to heavy conflicts.
* [vcpkg] Add 'slice.h' as a restricted header
* [osg] Improve accuracy of dependencies (disable some, add some to Depends)
* [vcpkg] Skip invoking a subprocess for 0 specs in load_tag_vars
* [ci.baseline] Skip mongo-c-driver on osx due to flakiness
* [teemo] Fix incorrect include file read
* [osg] Fix dependency typo: glut -> freeglut
* [vcpkg] Recover some lost performance with the addition of vcpkg_get_tags.
A huge performance cost was loading the triplet files over and over; instead, we splice the sources into a macro and load it once, then just call that macro for each port.
Remove use of hashing because we aren't cross-process-safe anyway (global static will do instead).
* [vcpkg] Change Supports atom 'windows' to include UWP. Improve Supports field documentation.
* [vcpkg] Add docs for VCPKG_ENV_PASSTHROUGH and VCPKG_DEP_INFO_OVERRIDE_VARS
* Fix typo
Co-authored-by: Curtis J Bezault <curtbezault@gmail.com>
Co-authored-by: Victor Romero <romerosanchezv@gmail.com>
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* Update the repo for jom 1.1.3
- The qt repo is unreliable, often down. Use the Berkeley mirror instead.
* Set two possible URLs for JOM v1.1.3
* Update indent to match coding style
Only the current and the previous version of doxygen can be downloaded
from: http://doxygen.nl
Sourceforge provides the current version and any previously released
versions for download: https://sourceforge.net/projects/doxygen/files/
Add sourceforge as alternative download URL. This avoids situations,
when the version of doxygen in vcpkg is n-2 and cannot be downloaded
any more, see e.g. commit: 526f937580
* Add support for building with MinGW
Tested with MSYS2 MinGW 8.3.0, gcc-mcf.lhmouse MinGW 9.2.1,
and StephanTLavavej/mingw-distro!
* Add MinGW toolchain
From your MinGW configured shell you could just use vcpkg to
configure packages.
An x64-mingw triplet would look like:
```
set(VCPKG_TARGET_ARCHITECTURE x64)
set(VCPKG_CRT_LINKAGE dynamic)
set(VCPKG_LIBRARY_LINKAGE static)
set(VCPKG_ENV_PASSTHROUGH PATH)
set(VCPKG_CMAKE_SYSTEM_NAME MinGW)
```
* Add MinGW community tripplets
x64 tested with https://github.com/StephanTLavavej/mingw-distro
x86, arm64, arm tested with https://github.com/mstorsjo/llvm-mingw
* Fix static qt5 builds and ignore system qmake
closes#9234 and #9239
* fix angle conflict and icu dependency
* add egl-registry as a dependency
* remove space
* adding spaces resolved the problem
* move files only if they exist
* Update the Wrapper to use the Postgres target
fixes some observed linkage issues
* update baseline
* add fontconfig on linux so CI is less flaky in a full rebuild
* fix linkage dependent qt5-imageformats libs
* Fix Wrapper for Linux and add other platform libs to Qt5::Core
* fix plugin properties in cmake files
* fix cmake files.
* fix missing plugin qminimal deployment into tools dir
* change wrapper slightly
* UNIX also means APPLE so it needs to be excluded
* fix the static windows build
* mark the parts of fixcmake which require further work to work with single configuration builds
* Update ci.baseline.txt
make qt5-tools pass for CI testing
* fix last regression
* break auto fontconfig in configure script to fix qt5-tools
* update baseline
* enable verbose to debug ci
* try to help it instead of breaking it
* completly link icu
* try to fix fontconfig configure
* fix configure call. cannot be called with a list!
* remove invalid line from patch
* force icu and reduce the required icu libs according to the configure script
* fix icu linkage
* add more icu dependencies and names for windows
* add more icu libs. Seems like all are needed
* fix typo
* print icu libs in debug
* check releasenames
* try again
* change link order
* add icu to wrapper
* fix typo
* patch icu configure for static windows builds
* add other icu libraries to the icu patch
* fix icu in x64-windows-static
* update baseline. VTK builds in local WSL so it should work in CI
* update VTK control to force rebuild
* remove qt5-tools=pass from baseline
* remove qcustomplot:x64-linux=fail from baseline
Co-authored-by: Robert Schumacher <roschuma@microsoft.com>
* [vcpkg_install_qmake] Add vcpkg_install_qmake and convert existing ports to use it.
[vcpkg_configure_qmake] Add 'staticlib' to CONFIG in static builds
* [vcpkg_configure_qmake] Don't specify DESTDIR
* [libqglviewer][vcpkg_configure_qmake] Add staticlib CONFIG only for libqglviewer
* [qt5-base] Increment version to track changes in vcpkg_configure_qmake()
* Fix separate make and install execution error issue.
* trigger CI system.
* Fix multiple copy files under debug, fix separator between make and install in linux.
Removing the compiler flag /Oi (Generate Intrinsic Functions) allows
meson to detect functions like memmove, memset correctly. This is
relevant to meson configure for fribidi (see fribidi/meson.build).
This fixes the following "issues" (from fribidi meson-log.txt):
testfile.c(17): error C2168: 'memmove': too few actual parameters for
intrinsic function
Checking for function "memmove" : NO
testfile.c(17): error C2168: 'memset': too few actual parameters for
intrinsic function
Checking for function "memset" : NO
And enables detection of the functions:
Checking for function "memmove" : YES
Checking for function "memset" : YES
* forward extra arguments to vcpkg_configure_qmake from submodules
* make image format dependent on tiff and libwebp
* make tools dependent on imageformat
* build options must be passed a bit different then normal qmake options
* add the required dependencies
* a new dependency discovered in qt5-declarative
* need webpdemux also
* qt5-declarative is dependent on imageformats so we can drop it here
* remove empty qt.conf if it exists. closes#8180
* add all recommended dependencies as dependencies in control.
* [vcpkg] add missing implib definitions, fix shared lib extension on mac
(cherry picked from commit 2cddef9541)
* Better find_library suffixes and prefixes.
* moved additional suffix into a comment and reverted back to what is expected on windows
* updated documentation for add variables.
* - Added scripts variable to ports file.
- Added check if triplet file is not available (NPE).
* - Fixed line endings.
* Provide location of .vcpkg-root to ports.cmake
* vcpkg sets VCPKG_ROOT_PATH in ports.cmake
* [vcpkg] Fail if VCPKG_ROOT_PATH is not passed from vcpkg.exe
* [vcpkg] Fix vcpkg rooth path
* [vcpkg] Make --x-scripts-root an experimental command
* update to 5.12.4
* removed port qt5-modularscripts and split it functionality into more functions into qt5-base
* added qt_port_hashes.cmake for simpler upgrade.
* added optional VCPKG_QT_HOST_MKSPEC and VCPKG_QT_TARGET_MKSPEC to select QTs build mkspecs from a triplet
* qt_<config>.conf are now copied from the build dir instead from the port dir
* fixed freetype dependencies.
* cleanup of vcpkg_qmake scripts. No strange/unclear replacements anymore.
* introduced vcpkg_buildpath_length_warning
* changed directory layout of the qt5 installation executables and mkspecs a bit.
* [portfile functions] Override execute_process() to accept ALLOW_IN_DOWNLOAD_MODE option
* [vcpkg install] Set VCPKG_DOWNLOAD_MODE when using --only-downloads option
* [vcpkg_find_acquire_program] Allow in Download Mode
* Don't stop when build fails for a package
* Download sources for all packages in dependency graph
* Improve output messages
* Enable acquiring MSYS packages in download mode
* Documentation
* Update documentation
* execute_process() always fails on Download Mode
* Regenerate docs and fix formatting
* Run clang-format
* Use _execute_process on vcpkg_from_<source> helpers
* Fix calls to _execute_process() when not in Download Mode
* [portfile functions] Override execute_process() to accept ALLOW_IN_DOWNLOAD_MODE option
* [vcpkg install] Set VCPKG_DOWNLOAD_MODE when using --only-downloads option
* [vcpkg_find_acquire_program] Allow in Download Mode
* Don't stop when build fails for a package
* Download sources for all packages in dependency graph
* Improve output messages
* Enable acquiring MSYS packages in download mode
* Documentation
* Update documentation
* execute_process() always fails on Download Mode
* Regenerate docs and fix formatting
* Run clang-format
* Use _execute_process on vcpkg_from_<source> helpers
* [vcpkg_check_features] Set OUT_EXPAND_OPTIONS explicitly
* [vcpkg_check_features] Allow reverse logic for features
* [vcpkg_check_features] Document new parameters
* [vcpkg_check_features] Remove unnecessary logging
* Do not create variables for each feature only set OUT_FEATURE_OPTIONS
* Improve documentation
* Update ports that use vcpkg_check_features()
* Missing documentation updates
* [pcl] Fix tools feature
* [opencv,opencv4] Fix usage of vcpkg_check_features()
* [opencv4] Fix typo
* added function vcpkg_fail_port_install to fail the portfile under requested circumstances and display a standarized failure message
* added always option.
* fix linux regressions
* bump control for ci tu rerun
Setting a variable in PARENT_SCOPE will not make the variable also visible in
current scope, which, as a result, causes FEATURE_OPTIONS to be set incorrectly.
* [vcpkg_configure_cmake] Add NO_CHARSET_FLAG option
* [vcpkg_configure_cmake] Add documentation for new NO_CHARSET_FLAG option
* [vcpkg_configure_cmake, windows toolchain] Handle NO_CHARSET_FLAG in toolchain
* [build.cpp] Add Windows toolchain to package hash
* [duilib,msix,thrift,tidy-html5] Use NO_CHARSET_FLAG to fix regressions
* Introduce an easier way to identify target systems...
* fix missing ()
* move the include around.
also added vcpkg_common_functions to be automatically included
* remove warning message
* added remaining VCPKG_CMAKE_SYSTEM_NAMEs found only in vcpkg_configure_cmake to load a toolchain.
* remove warning again from messed up merge
* [scripts] Fix vcpkg_fixup_cmake on non Windows platforms
Script was only handling tools executables ending with .exe.
Changed it so anything under /bin/ in transformed.
This fixes for instance FlatcTargets-release.cmake from flatbuffers
port on osx.
* [vcpkg] update python3 to 3.7.3 on windows
* Update scripts/cmake/vcpkg_find_acquire_program.cmake
Co-Authored-By: Bradley Austin Davis <bdavis@saintandreas.org>
* Fix qt5-base portfile
qt5-release.conf was not copied in release mode
* Fix vcpkg_configure_qmake.cmake in debug-only builds
* Add VCPKG_BUILD_TYPE support to qt_modular_library.cmake and vcpkg_build_qmake.cmake
Set the ARCHIVE and NOEXTRACT variables so that downloading works. Also HASH is case-sensitive, so make it lower case.
vcpkg_find_acquire_program(NUGET) was failing with the following error message:
-- Downloading https://dist.nuget.org/win-x86-commandline/v4.8.1/nuget.exe...
CMake Error at scripts/cmake/vcpkg_download_distfile.cmake:159 (file):
file DOWNLOAD error: cannot create directory
'C:/Users/david/Documents/GitHub/vcpkg/downloads/temp/C:/Users/david/Documents/GitHub/vcpkg/downloads'
- Specify file by full path name and verify that you have directory
creation and file write privileges.
Call Stack (most recent call first):
scripts/cmake/vcpkg_find_acquire_program.cmake:255 (vcpkg_download_distfile)
ports/gobject-introspection/portfile.cmake:20 (vcpkg_find_acquire_program)
scripts/ports.cmake:71 (include)
Allow setting of a URL so vcpkg can download repositories hosted on GitHub Enterprise
instances. Additionally provides a way to set the authorization token when downloading
private repositories.
* Add headers to vcpkg_download_distfile
Allows headers to be appended when downloading a distribution. This allows for setting
authentication headers to download from a private repository.
* [scripts,docs] Regenerate docs for portfile functions
* [docs,scripts] Fix typo regressions
* [docs,scripts] Fix broken link
* [qt5] Fix mac build
* [qt5] Disable parallel build on mac
* [qt5] Fix qmake find on mac
* [qt5] Update find jom for mac
* [qt5] Fix invocation of build command
* [qt5-base] Rebuild packages for #5624
* [harfbuzz] Remove disabled assert (failing due to -Werror)
* [qt5] Bump control version
* [qt5] Disable harfbuzz on mac
* [qt5-base] Disable harfbuzz on mac
* some libraries export <PackageName>LibraryDepends.cmake
instead of <PackageName>Targets.cmake.
Those file also need the fix of #1044
should close#4753
* prefered the general solution #4622.
hopefully solved the issue within #4150
replaced the regex with something more readable
(also ident is lost)
should close:
#4753#4633#4150
and maybe more
* Hash vcpkg_fixup_cmake_targets.cmake
* [boost] Fix use of find_package(Boost) with cache variables
[socket-io-client] Fix install
* reversed change back to use regex replace
* [glbinding] Fix _IMPORT_PREFIX depth in *-export.cmake files
* [tinyspline] Ignore warnings treated as errors
* [libevent, liblemon, libpng, smpeg2, zlib] Fix apply patches
* [libsodium] Fix apply patches
* [folly] Link correct libraries in debug and release
* [vtk] Remove unset of _IMPORT_PREFIX
* [tinyspline] Do not treat warnings as errors
* [smpeg2] Fix double* to int comparison
* [nvtt] Define value for HAVE_UNISTD_H in MacOS
* [libui] Fix MacOS X build
* [zlib] Fix download URL
* [qhull] Update to v7.2.1
* [podofo] Set value for HAVE_UNISTD_H in MacOS
* [mongo-cxx-driver,ogre,podofo,qhull] Bump CONTROL version
* [mongo-c-driver] Set _IMPORT_PREFIX
* [tmxparser] Bump CONTROL version
* [qhull,vxl] Bump CONTROL version
* [BZip2] Fix Unix Dynamic Builds
* [bzip2] Bump control version
* [libgta] Only build one flavor
* [vcpkg_configure_cmake] Resolve#2375 since we now use CMake >= 3.11
* update qt5-base to 5.12
* update modules to 5.12 (qt5-declarative and dependents don't work yet)
* fix qt5-declarative for 5.12 and some hashes.
* add qt5-declarative as dependency for qt5-graphicaleffects
* Use default library type for the platform instead of specifying SHARED
* [graphqlparser] Bump control version and slight cleanup
* [vcpkg_find_acquire_program] Correct for previous corruption of CI
* [xmsh] add support for xmsh library
- xmsh is a mesh document format. xmsh library is the reference
implementation for the format.
* [xmsh] removed extraneous file command
* [xmsh] update version to v0.2.3
* [xmsh] upgrade to version v0.3.1
* [xmsh] update to version v0.4
* + fix python executable packaging
* [vcpkg_find_acquire_program] Fix PYTHON3 on non-Windows
* [vcpkg] Fix CMAKE_SYSTEM_PROCESSOR
Add CMAKE_SYSTEM_PROCESSOR setting under UWP, Linux, and Darwin.
If explicitly specified VCPKG_CMAKE_SYSTEM_PROCESSOR in triplet files, CMAKE_SYSTEM_PROCESSOR is set to specified architecture.
* [vcpkg-toolchains] Move logic out of vcpkg_configure_cmake and into the toolchains.
* win_flex 2.5.9 is no longer downloadable, use 2.5.16
* [vcpkg_find_acquire_program] Fix links to flex and bison. Use subdir to avoid conflict with previous version.
* fdlibm init
* fix links
* Fix different hashes creation with google host
* Move functions to script
* Fix documentation
* [vcpkg_from_git] Add SHA512 argument, switch to zip to better support Windows.
* [fdlibm] Trigger rebuild
* [vcpkg_from_git] Use FETCH_HEAD reference to support tags
* Add SKIP_CLEAN option to vcpkg_install_msbuild
Also add vcpkg_clean_msbuild function to factor out clean
logic and allow re-use in portfiles.
* xalan-c: Correct header globbing
* vcpkg_install_msbuild: SKIP_CLEAN documentation correction
* [xalan-c] Add explicit check for localmsgindex header.
[docs] Regenerate
* [GraphicsMagick] bug-fix: image files won't load
GM (GraphicsMagick) was failing to load image files, notably PNG or JPEG
images, as it was being compiled with support for 'GraphicsMagick
Modules'. These are files with names specific to GM, and of the format,
'IM_*.dll'. vcpkg's install process was not setting these up. This
patch makes sure that when GM is built, it embed's GM's own
image-loading code into graphicsmagick.dll.
* [vcpkg_extract_source_archive_ex] Add PATCHES argument
* [openmesh] Use direct download instead of gitlab
* [blaze] Use PATCHES argument
* [graphicsmagick] Use vcpkg_extract_source_archive_ex
* [vcpkg] post-build cmake test
- test for applications with cmake build system
- Add a test feature to vcpkg core, make progress for #72
- Tests for zlib, bzip2, libiconv and openssl for example
- Test for curl will be failed, because of a bug #3053
It can detect a this type of problems
* [vcpkg_test_cmake] Add MODULE parameter to explicitly specify which type of integration to test.
* [bzip2] Fix casing of cmake module name
* use find_program to locate flex and bison when not Windows
* reset changes to thrift/portfile.cmake
* fix aquire flex and bison on non win platforms
* [vcpkg_find_acquire_program] Indentation and use CMAKE_HOST_WIN32