PowerToys/doc/releases/0.78.0/tests-checklist-stefan.md

Color Picker

• Enable the Color Picker in settings and ensure that the hotkey brings up Color Picker
  • when PowerToys is running unelevated on start-up
  • when PowerToys is running as admin on start-up
  • when PowerToys is restarted as admin, by clicking the restart as admin button in the settings

• Change Activate Color Picker shortcut and check the new shortcut is working
• Try all three Activation behaviors(Color Picker with editor mode enabled, Editor, Color Picker only)
• Change Color format for clipboard and check if the correct format is copied from the Color picker
• Try to copy color formats to the clipboard from the Editor
• Check Show color name and verify if color name is shown in the Color picker
• Enable one new format, disable one existing format, reorder enabled formats and check if settings are populated to the Editor
• Select a color from the history in the Editor
• Remove color from the history in the Editor
• Open the Color Picker from the Editor
• Open Adjust color from the Editor
• Check Color Picker logs for errors

FancyZones Editor

• Open editor from the settings
• Open editor with a shortcut
• Create a new layout (grid and canvas)
• Duplicate a template and a custom layout
• Delete layout
• Edit templates (number of zones, spacing, distance to highlight adjacent zones). Verify after reopening the editor that saved settings are kept the same.
• Edit canvas layout: zones size and position, create or delete zones.
• Edit grid layout: split, merge, resize zones.
• Check Save and apply and Cancel buttons behavior after editing.
• Assign a layout to each monitor.
• Assign keys to quickly switch layouts (custom layouts only), Win + Ctrl + Alt + number.
• Assign horizontal and vertical default layouts
• Test duplicate layout focus
  • Select any layout X in 'Templates' or 'Custom' section by click left mouse button
  • Mouse right button click on any layout Y in 'Templates' or 'Custom' sections
  • Duplicate it by clicking 'Create custom layout' (Templates section) or 'Duplicate' in 'Custom' section
  • Expect the layout Y is duplicated

FancyZones

Appearance

• Change colors, opacity and Show zone number options. Verify they're applied.

Excluded apps

• Exclude some apps, verify that they're not applicable to a zone.

Dragging

• Hold Shift key to activate zones while dragging on, Use a non-primary mouse button to toggle zone activation off. Start dragging a window, then press shift. Zones are shown when dragging a window with shift pressed, hidden when you released shift or snapped zone.
• Hold Shift key to activate zones while dragging on, Use a non-primary mouse button to toggle zone activation off. Press shift first, then start dragging a window. Zones are shown when dragging a window with shift pressed, hidden when you released shift or snapped zone.
• Hold Shift key to activate zones while dragging off, Use a non-primary mouse button to toggle zone activation on. Zones are shown immediately when dragging a window and hidden when you click a non-primary mouse button or press shift.
• Hold Shift key to activate zones while dragging off, Use a non-primary mouse button to toggle zone activation off. Zones are shown immediately when dragging a window, hidden when you press shift.
• Hold Shift key to activate zones while dragging on, Use a non-primary mouse button to toggle zone activation on. Zones aren't shown immediately, only when shift is pressed or when a non-primary mouse click changes the state.
• Show zones on all monitor whilw dragging a window - turn on,off, verify behavior.
• Create a canvas layout with overlapping zones, check zone activation behavior with all When multiple zones overlap options
• Make dragged window transparent - turn on, off, verify behavior

Snapping

Disable FZ and clear app-zone-history.json before starting. FancyZones should be disabled, otherwise, it'll save cashed values back to the file.

• Snap a window to a zone by dragging, verify app-zone-history.json contains info about the window position on the corresponding work area.
• Snap a window to a zone by a keyboard shortcut, verify app-zone-history.json contains info about the window position on the corresponding work area.
• Snap a window to another monitor, verify app-zone-history.json contains positions about zones on both monitors.
• Snap a window to several zones, verify zone numbers in the json file are correct.
• Snap a window to a zone, unsnap it, verify this app was removed from the json file.
• Snap the same window to a zone on two different monitors or virtual desktops. Then unsnap from one of them, verify that info about unsnapped zone was removed from app-zone-history.json. Verify info about the second monitor/virtual desktop is kept.
• Enable Restore the original size of windows when unsnapping, snap window, unsnap window, verify the window changed its size to original.
• Disable Restore the original size of windows when unsnapping, snap window, unsnap window, verify window size wasn't changed.
• Disable Restore the original size of windows when unsnapping, snap window, enable Restore the original size of windows when unsnapping, unsnap window, verify window size wasn't changed.
• Launch PT in user mode, try to assign a window with administrator privileges to a zone. Verify the notification is shown.
• Launch PT in administrator mode, assign a window with administrator privileges.

• Open Task view , right-click on the window, check the Show this window on all desktops or the Show windows from this app on all desktops option to turn it on.
  • Turn Show this window on all desktops on, verify you can snap this window to a zone.
  • Turn Show windows from this app on all desktops on, verify you can snap this window to a zone.

Snapped window behavior

• Keep windows in their zones when the screen resolution changes on, snap a window to a zone, change the screen resolution or scaling, verify window changed its size and position.
• Keep windows in their zones when the screen resolution changes on, snap a window to a zone on the secondary monitor. Disconnect the secondary monitor (the window will be moved to the primary monitor). Reconnect the secondary monitor. Verify the window returned to its zone.
• Keep windows in their zones when the screen resolution changes off, snap a window to a zone, change the screen resolution or scaling, verify window didn't change its size and position.

Enable During zone layout changes, windows assigned to a zone will match new size/positions and prepare layouts with 1 and 3 zones where zone size/positions are different.

• Snap a window to zone 1, change the layout, verify window changed its size/position.
• Snap a window to zone 3, change the layout, verify window didn't change its size/position because another layout doesn't have a zone with this zone number.
• Snap a window to zones 1-2, change the layout, verify window changed its size/position to fit zone 1.
• Snap a window to zones 1-2, change the layout (the window will be snapped to zone 1), then return back to the previous layout, verify the window snapped to 1-2 zones.
• Disable During zone layout changes, windows assigned to a zone will match new size/positions, snap window to zone 1, change layout, verify window didn't change its size/position

Enable Move newly created windows to their last known zone.

• Snap a window to the primary monitor, close and reopen the window. Verify it's snapped to its zone.
• Snap a window to zones on the primary and secondary monitors. Close and reopen the app. Verify it's snapped to the zone on the active monitor.
• Snap a window to the secondary monitor (use a different app or unsnap the window from the zone on the primary monitor), close and reopen the window. Verify it's snapped to its zone.
• Snap a window, turn off FancyZones, move that window, turn FZ on. Verify window returned to its zone.
• Move unsnapped window to a secondary monitor, switch virtual desktop and return back. Verify window didn't change its position and size.
• Snap a window, then resize it (it's still snapped, but doesn't fit the zone). Switch the virtual desktop and return back, verify window didn't change its size.

Enable Move newly created windows to the current active monitor.

• Open a window that wasn't snapped anywhere, verify it's opened on the active monitor.

• Open a window that was snapped on the current virtual desktop and current monitor, verify it's opened in its zone.

• Open a window that was snappen on the current virtual desktop and another monitor, verify it's opened on the active monitor.

• Open a window that was snapped on another virtual desktop, verify it's opened on the active monitor.

• Enable Allow popup windows snapping and Allow child windows snapping, try to snap Notepad++ search window. Verify it can be snapped.

• Enable Allow popup windows snapping, snap Teams, verify a popup window appears in its usual position.

• Enable Allow popup windows snapping, snap Visual Studio Code to a zone, and open any menu. Verify the menu is where it's supposed to be and not on the top left corner of the zone.

• Enable Allow child windows snapping, drag any child window (e.g. Solution Explorer), verify it can be snapped to a zone.

• Disable Allow child windows snapping, drag any child window (e.g. Solution Explorer), verify it can't be snapped to a zone.

Switch between windows in the current zone

Enable Switch between windows in the current zone (default shortcut is Win + PgUp/PgDown)

• Snap several windows to one zone, verify switching works.
• Snap several windows to one zone, switch virtual desktop, return back, verify window switching works.
• Disable Switch between windows in the current zone, verify switching doesn't work.

Override Windows Snap

• Disable Override Windows Snap, verify it's disabled.

Enable Override Windows Snap. Select Move windows based on Zone index.

• Open the previously not snapped window, press Win+LeftArrow / Win+RightArrow, verify it's snapped to a first/last zone.

• Verify Win+LeftArrow moves the window to a zone with the previous index.

• Verify Win+RightArrow moves the window to a zone with the next index.

• Verify Win+ArrowUp and Win+ArrowDown work as usual.

• Move windows between zones across all monitors disabled. Verify Win+LeftArrow doesn't move the window to any zone when the window is in the first zone.

• Move windows between zones across all monitors disabled. Verify Win+RightArrow doesn't move the window to any zone when the window is in the last zone.

One monitor:

• Move windows between zones across all monitors enabled. Verify Win+LeftArrow doesn't move the window to any zone when the window is in the first zone.
• Move windows between zones across all monitors enabled. Verify Win+RightArrow doesn't move the window to any zone when the window is in the last zone.

Two and more monitors:

• Move windows between zones across all monitors enabled. Verify Win+LeftArrow cycles window position moving it from the first zone on the current monitor to the last zone of the left (or rightmost, if the current monitor is leftmost) monitor.
• Move windows between zones across all monitors enabled. Verify Win+RightArrow cycles window position moving it from the last zone on the current monitor to the first zone of the right (or leftmost, if the current monitor is rightmost) monitor.

Select Move windows based on Relative position.

• Open the previously not snapped window, press Win+Arrow, verify it's snapped.

• Extend the window using Ctrl+Alt+Win+Arrow. Verify the window is snapped to all zones.

• Extend the window using Ctrl+Alt+Win+Arrow and return it back using the opposite arrow. Verify it could be reverted while you hold Ctrl+Alt+Win.

• Move windows between zones across all monitors disabled. Verify Win+LeftArrow cycles the window position to the left (from the leftmost zone moves to the rightmost in the same row) within one monitor.

• Move windows between zones across all monitors disabled. Verify Win+RightArrow cycles the window position to the right within one monitor.

• Move windows between zones across all monitors disabled. Verify Win+UpArrow cycles the window position up within one monitor.

• Move windows between zones across all monitors disabled. Verify Win+DownArrow cycles the window position down within one monitor.

• Move windows between zones across all monitors enabled. Verify Win+LeftArrow cycles the window position to the left (from the leftmost zone moves to the rightmost in the same row) within all monitors.

• Move windows between zones across all monitors enabled. Verify Win+RightArrow cycles the window position to the right within all monitors.

• Move windows between zones across all monitors enabled. Verify Win+UpArrow cycles the window position up within all monitors.

• Move windows between zones across all monitors enabled. Verify Win+DownArrow cycles the window position down within all monitors.

Layout apply

Enable Enable quick layout switch, assign numbers to custom layouts.

• Switch with Win + Ctrl + Alt + key.
• Switch with just a key while dragging a window.
• Turn Flash zones when switching layout on/off, verify it's flashing/not flashing after pressing the shortcut.
• Disable Enable quick layout switch, verify shortcuts don't work.
• Disable spacing on any grid layout, verify that there is no space between zones while dragging a window.
• Create a new virtual desktop, verify that there are the same layouts as applied to the previous virtual desktop.
• After creating a virtual desktop apply another layout or edit the applied one. Verify that the other virtual desktop layout wasn't changed.
• Delete an applied custom layout in the Editor, verify that there is no layout applied instead of it.
• Apply a grid layout, change the screen resolution or scaling, verify that the assigned layout fits the screen. NOTE: canvas layout could not fit the screen if it was created on a monitor with a different resolution.

Layout reset

• Test layout resetting. Before testing
  • Remove all virtual desktops
  • Remove CurrentVirtualDesktop from \HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\SessionInfo\1\VirtualDesktops
  • Remove VirtualDesktopIDs from \HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\VirtualDesktops

• Test screen locking

  • Set custom layouts on each monitor
  • Lock screen / unplug monitor / plug monitor
  • Verify that layouts weren't reset to defaults

• Test restart

  • Set custom layouts on each monitor
  • Restart the computer
  • Verify that layouts weren't reset to defaults

• Test applying default layouts on reset

  • Set default horizontal and vertical layouts
  • Delete applied-layouts.json
  • Verify that selected default layout is applied according to configuration

Span zones across monitors

• Switch between Allow zones to span across monitors on and off. Verify that layouts are applied correctly in both cases.

Repeat the previous subsections steps after enabling Allow zones to span across monitors

• Dragging
• Snapping
• Snapped window behavior
• Switch between windows in the current zone
• Override Windows Snap
• Layout apply
• Layout reset

File Explorer Add-ons

• Running as user:
  • go to PowerToys repo root
  • verify the README.md Preview Pane shows the correct content
  • go to PowerToys repo and visit src\modules\ShortcutGuide\ShortcutGuide\svgs
  • verify Preview Pane works for the SVG files
  • verify the Icon Preview works for the SVG file (loop through different icon preview sizes)
  • go to PowerToys repo and visit src\modules\previewpane\UnitTests-PdfPreviewHandler\HelperFiles
  • verify Preview Pane works for the PDF file
  • verify the Icon Preview works for the PDF file (loop through different icon preview sizes)
  • go to PowerToys repo and visit src\modules\previewpane\UnitTests-GcodePreviewHandler\HelperFiles
  • verify Preview Pane works for the gcode file
  • verify the Icon Preview works for the gcode file (loop through different icon preview sizes)
  • go to PowerToys repo and visit src\modules\previewpane\UnitTests-StlThumbnailProvider\HelperFiles
  • verify the Icon Preview works for the stl file (loop through different icon preview sizes)
  • go to PowerToys repo and visit src\runner
  • verify Preview Pane works for source files (shows syntax highlighting)
• Running as admin (or user since recently):
  • open the Settings and turn off the Preview Pane and Icon Previous toggles
  • go to PowerToys repo root
  • verify the README.md Preview Pane doesn't show any content
  • go to PowerToys repo and visit src\modules\ShortcutGuide\ShortcutGuide\svgs
  • verify Preview Pane doesn't show the preview for the SVG files
  • the Icon Preview for the existing SVG will still show since the icons are cached (you can also use cleanmgr.exe to clean all thumbnails cached in your system). You may need to restart the machine for this setting to apply as well.
  • copy and paste one of the SVG file and verify the new file show the generic SVG icon
  • go to PowerToys repo and visit src\modules\previewpane\UnitTests-PdfPreviewHandler\HelperFiles
  • verify Preview Pane doesn't show the preview for the PDF file
  • go to PowerToys repo and visit src\modules\previewpane\UnitTests-GcodePreviewHandler\HelperFiles
  • verify Preview Pane doesn't show the preview for the gcode file
  • go to PowerToys repo and visit src\modules\previewpane\UnitTests-StlThumbnailProvider\HelperFiles
  • verify Preview Pane doesn't show the preview for the stl file (a generated thumbnail would show when there's no preview)
  • go to PowerToys repo and visit src\runner
  • verify Preview Pane doesn't show the preview for source code files or that it's a default previewer instead of Monaco

Quick Accent

• Enable Quick Accent and open notepad. Then:
  • Press a and the left or right arrow and verify the accent menu appears and adds the accented letter you've selected. Use left and arrow keys to cycle through the options.
  • Press a and the space key and verify the accent menu appears and adds the accented letter you've selected. Use Space to navigate forward, Space + Shift to navigate backward.
  • Disable Quick Accent and verify you can no longer add accented characters through Quick Accent.
• Test the different settings and verify they are applied:
  • Activation key
  • Language (for example, Currency has no accents for 'a' but has for 's')
  • Toolbar position (test every option, some had issues before)
  • Input delay
  • Exclude some apps. Verify that Quick Accent is not activated for them.
  • Sort characters by frequency.
  • Always start on the first character when using left/right arrows as activation method.

Text Extractor

• Enable Text Extractor. Then:
  • Press the activation shortcut and verify the overlay appears.
  • Press Escape and verify the overlay disappears.
  • Press the activation shortcut and verify the overlay appears.
  • Right-click and select Cancel. Verify the overlay disappears.
  • Disable Text Extractor and verify that the activation shortuct no longer activates the utility.
• With Text Extractor enabled and activated:
  • Try to select text and verify it is copied to the clipboard.
  • Try to select a different OCR language by right-clicking and verify the change is applied.
• In a multi-monitor setup with different dpis on each monitor:
  • Verify text is correctly captured on all monitors.
• Test the different settings and verify they are applied:
  • Activation shortcut
  • OCR Language

Registry Preview

• Open Registry Editor, add new registry key with 1 string value and 1 binary value in e.g. HKLM/Software/Classes/PowerToysTest. Right click new registry key->export and export it to file.

• Launch Registry Preview by right-clicking exported .reg file->'Preview'. Then:

  • Edit file content. Ensure that visual try is being re-populated while typing. Save the file by pressing Save file button. Confirm that file is properly saved by pressing Edit file... button which will open file in Notepad. Try saving file using Save file as... button.
  • Edit file externaly (e.g. in Notepad) and save it there. Pres Reload from file button and ensure that file content and visual tree are reloaded and show new content.
  • Select some registry key with registry values in visual tree and ensure that registry values are shown properly in bottom-right area.
  • Try opening different registry file by pressing Open file button.
  • Delete newly created registry key from first step manually in Registry Editor, then try writing registry changes to registry by pressing Write to Registry button in Registry Preview. Be careful what you are writing!

• Open Registry Preview Settings. Then:

  • Disable Registry Preview and ensure that Preview context menu option for .reg files no longer appears.
  • Try to launch Registry Preview from it's OOBE page while Registry Preview is disabled and ensure that it does not start.
  • Enable Registry Preview again and ensure that Preview context menu option for .reg files appears and that it starts Registry Preview correctly.
  • Try to launch Registry Preview from it's Settings page and ensure that it is launched properly.
  • Try to launch Registry Preview from it's OOBE page and ensure that it is launched properly.
  • Enable Default app setting. Verify that .reg files are opened with Registry Preview by default. Disable Default app setting. Verify that Registry Editor is now default app.

Peek

• Open different files to check that they're shown properly

  • Image
  • Text or dev file
  • Markdown file
  • PDF
  • HTML
  • Archive files (.zip, .tar, .rar)
  • Any other not mentioned file (.exe for example) to verify the unsupported file view is shown

• Pinning/unpinning

  • Pin the window, switch between images of different size, verify the window stays at the same place and the same size.
  • Pin the window, close and reopen Peek, verify the new window is opened at the same place and the same size as before.
  • Unpin the window, switch to a different file, verify the window is moved to the default place.
  • Unpin the window, close and reopen Peek, verify the new window is opened on the default place.

• Open with a default program

  • By clicking a button.
  • By pressing enter.

• Switch between files in the folder using LeftArrow and RightArrow, verify you can switch between all files in the folder.
• Open multiple files, verify you can switch only between selected files.
• Change the shortcut, verify the new one works.