PowerToys/doc/releases/0.62.0/tests-checklist-seraphima.md

## Install tests
 * install a **previous version** on a clean machine (a clean machine doesn't have the `%localappdata%\Microsoft\PowerToys` folder)
 * open the Settings and for each module change at least one option
 * open the FancyZones editor and create two custom layouts:
    * a canvas layout with 2 zones, use unicode chars in the layout's name
    * one from grid template using 4 zones and splitting one zone
    * apply the custom canvas layout to the primary desktop
    * create a virtual desktop and apply the custom grid layout
    * if you have a second monitor apply different templates layouts for the primary desktop and for the second virtual desktop
 * install the new version (it will uninstall the old version and install the new version)
 - [ ] verify the settings are preserved and FancyZones configuration is still the same

## General Settings

**Admin mode:**
 - [x] restart PT and verify it runs as user
 - [x] restart as admin and set "Always run as admin"
 - [x] restart PT and verify it  runs as admin
 * if it's not on, turn on "Run at startup"
 - [x] reboot the machine and verify PT runs as admin (it should not prompt the UAC dialog)
 * turn Always run as admin" off
 - [x] reboot the machine and verify it now runs as user

**Modules on/off:**
 - [x] turn off all the modules and verify all module are off
 - [x] restart PT and verify that all module are still off in the settings page and they are actually inactive
 - [x] turn on all the module, all module are now working
 - [x] restart PT and verify that all module are still on in the settings page and they are actually working

## Color Picker
* Enable the Color Picker in settings and ensure that the hotkey brings up Color Picker
  - [x] when PowerToys is running unelevated on start-up
  - [x] when PowerToys is running as admin on start-up
  - [x] when PowerToys is restarted as admin, by clicking the restart as admin button in the settings
- [x] Change `Activate Color Picker shortcut` and check the new shortcut is working
- [x] Try all three `Activation behavior`s(`Color Picker with editor mode enabled`, `Editor`, `Color Picker only`)
- [x] Change `Color format for clipboard` and check if the correct format is copied from the Color picker
- [x] Try to copy color formats to the clipboard from the Editor
- [x] Check `Show color name` and verify if color name is shown in the Color picker
- [x] Enable one new format, disable one existing format, reorder enabled formats and check if settings are populated to the Editor
- [x] Select a color from the history in the Editor
- [x] Remove color from the history in the Editor
- [x] Open the Color Picker from the Editor
- [x] Open Adjust color from the Editor
- [x] Check Color Picker logs for errors

## FancyZones Editor

- [x] Open editor from the settings
- [x] Open editor with a shortcut
- [x] Create a new layout (grid and canvas)
- [x] Duplicate a template and a custom layout
- [x] Delete layout
- [x] Edit templates (number of zones, spacing, distance to highlight adjacent zones). Verify after reopening the editor that saved settings are kept the same.
- [x] Edit canvas layout: zones size and position, create or delete zones.
- [x] Edit grid layout: split, merge, resize zones.
- [x] Check `Save and apply` and `Cancel` buttons behavior after editing.
- [x] Assign a layout to each monitor.
- [x] Assign keys to quickly switch layouts (custom layouts only), `Win + Ctrl + Alt + number`.
- [x] Test duplicate layout focus
   * Select any layout X in 'Templates' or 'Custom' section by click left mouse button
   * Mouse right button click on any layout Y in 'Templates' or 'Custom' sections
   * Duplicate it by clicking 'Create custom layout' (Templates section) or 'Duplicate' in 'Custom' section
   * Expect the layout Y is duplicated


## FancyZones
- [x] Switch between `Allow zones to span across monitors` on and off. Verify that layouts are applied correctly in both cases.
- [x] Change zone colors and opacity.
- [x] Exclude some apps, verify that they're not applicable to a zone.
- [x] Launch PT in user mode, try to assign a window with administrator privileges to a zone. Verify the notification is shown.
- [x] Launch PT in administrator mode, assign a window with administrator privileges.
- [x] Create virtual desktop, verify that there are the same layouts as applied to the previous virtual desktop.
- [x] After creating a virtual desktop apply another layout or edit the applied one. Verify that the other virtual desktop layout wasn't changed.
- [x] Delete an applied custom layout in the Editor, verify that there is no layout applied instead of it.
* Open `Task view` , right-click on the window, check the `Show this window on all desktops` or the `Show windows from this app on all desktops` option to turn it on.
    - [x] Turn Show this window on all desktops on, verify you can snap this window to a zone.
    - [x] Turn Show windows from this app on all desktops on, verify you can snap this window to a zone.
* Switch between layouts with quick keys.
    - [x] Switch with `Win` + `Ctrl` + `Alt` + `key`
    - [x] Switch with just a key while dragging a window.
* Change screen resolution or scaling.
    - [x] Assign grid layout, verify that the assigned layout fits the screen.
      NOTE: canvas layout could not fit the screen if it was created on a monitor with a different resolution.
- [x] Disable FZ
- [x] Re-enable FZ, verify that everything is in the same state as it was before disabling.

* Test layout resetting.
Before testing 
   * Remove all virtual desktops 
   * Remove `CurrentVirtualDesktop` from `\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\SessionInfo\1\VirtualDesktops` 
   * Remove `VirtualDesktopIDs` from `\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\VirtualDesktops`


- [x] Test screen locking
   * Set custom layouts on each monitor
   * Lock screen / unplug monitor / plug monitor
   * Verify that layouts weren't reset to defaults
   
- [x] Test restart
   * Set custom layouts on each monitor
   * Restart the computer
   * Verify that layouts weren't reset to defaults

## File Explorer Add-ons
 * Running as user:
   * go to PowerToys repo root
   - [x] verify the README.md Preview Pane shows the correct content
   * go to PowerToys repo and visit src\modules\ShortcutGuide\ShortcutGuide\svgs
   - [x] verify Preview Pane works for the SVG files
   - [x] verify the Icon Preview works for the SVG file (loop through different icon preview sizes)
   * go to PowerToys repo and visit src\modules\previewpane\UnitTests-PdfPreviewHandler\HelperFiles
   - [x] verify Preview Pane works for the PDF file
   - [x] verify the Icon Preview works for the PDF file (loop through different icon preview sizes)
   * go to PowerToys repo and visit src\modules\previewpane\UnitTests-GcodePreviewHandler\HelperFiles
   - [x] verify Preview Pane works for the gcode file
   - [x] verify the Icon Preview works for the gcode file (loop through different icon preview sizes)
   * go to PowerToys repo and visit src\modules\previewpane\UnitTests-StlThumbnailProvider\HelperFiles
   - [x] verify the Icon Preview works for the stl file (loop through different icon preview sizes)
   * go to PowerToys repo and visit src\runner
   - [x] verify Preview Pane works for source files (shows syntax highlighting)
 * Running as admin (or user since recently):
   * open the Settings and turn off the Preview Pane and Icon Previous toggles
   * go to PowerToys repo root
   - [x] verify the README.md Preview Pane doesn't show any content
   * go to PowerToys repo and visit src\modules\ShortcutGuide\ShortcutGuide\svgs
   - [x] verify Preview Pane doesn't show the preview for the SVG files
   * the Icon Preview for the existing SVG will still show since the icons are cached (you can also use `cleanmgr.exe` to clean all thumbnails cached in your system). You may need to restart the machine for this setting to apply as well.
   - [x] copy and paste one of the SVG file and verify the new file show the generic SVG icon
   * go to PowerToys repo and visit src\modules\previewpane\UnitTests-PdfPreviewHandler\HelperFiles
   - [x] verify Preview Pane doesn't show the preview for the PDF file
   * go to PowerToys repo and visit src\modules\previewpane\UnitTests-GcodePreviewHandler\HelperFiles
   - [x] verify Preview Pane doesn't show the preview for the gcode file
   * go to PowerToys repo and visit src\modules\previewpane\UnitTests-StlThumbnailProvider\HelperFiles
   - [x] verify Preview Pane doesn't show the preview for the stl file (a generated thumbnail would show when there's no preview)
   * go to PowerToys repo and visit src\runner
   - [x] verify Preview Pane doesn't show the preview for source code files or that it's a default previewer instead of Monaco

## Awake
 - [x] Try out the features and see if they work, no list at this time.

### Text Extractor
 * Enable Text Extractor. Then:
   - [x] Press the activation shortcut and verify the overlay appears.
   - [x] Press Escape and verify the overlay disappears.
   - [x] Press the activation shortcut and verify the overlay appears.
   - [x] Right-click and select Cancel. Verify the overlay disappears.
   - [x] Disable Text Extractor and verify that the activation shortuct no longer activates the utility.
 * With Text Extractor enabled and activated:
   - [x] Try to select text and verify it is copied to the clipboard.
 * In a multi-monitor setup with different dpis on each monitor:
   - [x] Verify text is correctly captured on all monitors.
 * Test the different settings and verify they are applied:
   - [x] Activation shortcut