mirror of
https://github.com/cesanta/mongoose.git
synced 2024-12-16 18:39:18 +08:00
25 lines
1.9 KiB
Markdown
25 lines
1.9 KiB
Markdown
# Zephyr Project examples
|
|
|
|
## Building
|
|
|
|
- Run `make zephyr`, this will clone the Zephyr Project repo or update it if you've already done it before
|
|
- Now you can build the project, follow one of this options:
|
|
|
|
### Trying on a simulated board
|
|
|
|
The default board is an x86 machine that can be simulated with QEMU, and runs inside a _Docker_ container, you only need to have _Docker_ installed. Its Ethernet is also simulated and uses the TUN/TAP interface.
|
|
You'll need a TUN/TAP interface (default name is _tap0_) on your host machine; follow the instructions [here](https://github.com/cesanta/mongoose/tree/master/examples/mip-tap#linux-setup) to configure your network to provide a suitable networking environment.
|
|
- Run `make build`. The interface configuration on the simulated machine side is in the file _overlay-e1000.conf_, and defaults to _tap0_. You can change this overlay file adding an `OVERLAY` argument (e.g.: *make build OVERLAY="-DOVERLAY_CONFIG=something"*).
|
|
- Once the build succeeds, run `make run` to run the target. The default _Docker_ configuration is to share _/dev/net/tun_; if this does not work for you, pass the necessary _Docker_ parameters inside `SHARETUN` (e.g.: *make run SHARETUN=something*).
|
|
|
|
### Using a real board
|
|
|
|
- Run `make build BOARD=yourboardname` (e.g.: *make build BOARD=nucleo_f746zg*)
|
|
- Once the build succeeds, run `make flash`. The Makefile shares the USB bus with the _Docker_ container, this works well with ST-Link and J-Link devices. If this does not work for you, pass the necessary _Docker_ parameters inside `SHAREUSB` (e.g.: *make flash SHAREUSB=something*)
|
|
- The generated ELF file is at _build/zephyr_
|
|
|
|
## Cleaning up
|
|
|
|
- You can run `make clean` to clean up the build files but keep the configuration files, which speeds the next build
|
|
- If you do major changes (like compiling for a different board...), run `make pristine` to clean up everything under the _build_ directory.
|