mirror of
https://github.com/cesanta/mongoose.git
synced 2024-12-15 18:09:15 +08:00
42 lines
1.6 KiB
Markdown
42 lines
1.6 KiB
Markdown
# Baremetal webserver on NUCLEO-H743ZI
|
|
|
|
This firmware uses MIP, an experimental TCP/IP stack of the Mongoose Network Library,
|
|
which implements the following:
|
|
|
|
- A complete [HTTP device dashboard](../../device-dashboard) with:
|
|
- User authentication
|
|
- Real-time device data graph
|
|
- Coninfiguration display and update
|
|
- MQTT communication with a remote MQTT server
|
|
- No dependencies: no HAL, no CMSIS, no RTOS
|
|
- Hand-written [mcu.h](mcu.h) header based on the [datasheet](https://www.st.com/resource/en/reference_manual/rm0433-stm32h742-stm32h743753-and-stm32h750-value-line-advanced-armbased-32bit-mcus-stmicroelectronics.pdf)
|
|
- Interrupt-driven [Ethernet driver](../../../drivers/driver_stm32h.c)
|
|
- Debug log on UART3 (st-link)
|
|
|
|
## Requirements
|
|
|
|
- [GNU make](http://mongoose.ws/tutorials/tools/#gnu-make)
|
|
- [ARM GCC](http://mongoose.ws/tutorials/tools/#arm-gcc)
|
|
- [stlink](http://mongoose.ws/tutorials/tools/#stlink) for flashing
|
|
|
|
The links above will send you to tutorials on how to install each of those tools in your workstation for Linux, Mac, and Windows.
|
|
|
|
## Usage
|
|
|
|
Plugin your Nucleo board into USB, and attach an Ethernet cable.
|
|
To build and flash:
|
|
|
|
```sh
|
|
$ make clean flash
|
|
```
|
|
|
|
To see debug log, use any serial monitor program like `picocom` at 115200 bps and configure it to insert carriage returns after line feeds:
|
|
|
|
```sh
|
|
$ picocom /dev/ttyACM0 -i -b 115200 --imap=lfcrlf
|
|
```
|
|
|
|
There is also a [tutorial on a similar example](https://mongoose.ws/tutorials/stm32/nucleo-f746zg-baremetal/) but for the NUCLEO-F746ZG board
|
|
|
|
For more details and benchmark data on MIP, check the [F746ZG example](../nucleo-f746zg-baremetal/)
|