mirror/mongoose
1
0
Fork 0
mirror of https://github.com/cesanta/mongoose.git synced 2024-12-15 09:49:19 +08:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
44975da7db
mongoose/examples/stm32/nucleo-f746zg-baremetal/README.md
Sergio R. Caprile 44975da7db Get rid of Docker, part 1
2023-01-20 12:42:38 -03:00

2.9 KiB
Raw Blame History

Baremetal webserver on NUCLEO-F746ZG

This firmware uses MIP, an experimental TCP/IP stack of the Mongoose Network Library, which implements the following:

  • A complete HTTP device dashboard with:
    • User authentication
    • Real-time device data graph
    • Coninfiguration display and update
    • MQTT communication with a remote MQTT server
  • Implements SNTP time synchronisation
  • No dependencies: no HAL, no CMSIS, no RTOS
  • Hand-written mcu.h header based on the datasheet
  • Interrupt-driven Ethernet driver
  • Blue LED blinky, based on SysTick interrupt
  • User button handler, turns off/on green LED, based on EXTI, interrupt-driven
  • HardFault handler that blinks red LED
  • Debug log on UART3 (st-link)

Requirements

The links above will send you to tutorials on how to install each of those tools in your workstation for Linux, Mac, and Windows.

Usage

Plugin your Nucleo board into USB, and attach an Ethernet cable. To build and flash:

$ make clean flash

To see debug log, use any serial monitor program like picocom at 115200 bps and configure it to insert carriage returns after line feeds:

$ picocom /dev/ttyACM0 -i -b 115200 --imap=lfcrlf

There is also a detailed tutorial on this example

Benchmark

A quick comparison is made with several other implementations. Note: IP in the table below is the IP address printed on the console after boot. The benchmark command is the same: siege -c 5 -t 5s http://IP

Zephyr LWIP sockets LWIP raw MIP
Requests per second 3 16 286 1080
Firmware size 117k (*) 160k 114k 28k
  • Zephyr: uses Zehypr's RTOS and TCP stack, with Mongoose library on top, source code. (*) By default, Zephyr example is TLS-enabled. To compare sizes, a TLS-disabled build was done by disabling TLS in prj.conf and CMakeLists.txt
  • LWIP sockets: uses FreeRTOS and LWIP with sockets support, with Mongoose library on top, source code. built with #define MG in Core/main.c
  • LWIP raw: uses FreeRTOS and LWIP without sockets, LWIP's httpd server, source code. built with #define MG line commented out in Core/main.c
  • MIP: this repository