mirror of
https://github.com/cesanta/mongoose.git
synced 2024-12-16 10:29:22 +08:00
1.4 KiB
1.4 KiB
Baremetal webserver on NUCLEO-F429ZG
This firmware uses experimental TCP/IP stack of the Mongoose Network Library, which implements the following:
- Implements HTTP server and SNTP time synchronisation
- No dependencies: no HAL, no CMSIS, no RTOS
- Hand-written mcu.h header based on a datasheet
- Interrupt-driven mip_driver_stm32.h ethernet driver
- Blue LED blinky, based on SysTick interrupt
- User button handler, turns off/on green LED, based on EXTI, interrupt-driven
- HardFault handler that blinks red LED
- Debug log on UART3 (st-link)
Requirements
Usage
Plugin your Nucleo board into USB, and attach an Ethernet cable. To build and flash:
$ make clean flash
To see debug log, use any serial monitor program like picocom
at 115200 bps and configure it to insert carriage returns after line feeds:
$ picocom /dev/ttyACM0 -i -b 115200 --imap=lfcrlf
For more details and benchmark data on MIP, check the F746ZG example